Ibook g4 what to do, 3 beeps on start up.

Hello,
You will have to bare with me as I'm not well up on macs but hoping you can provide some ideas.
Ive had an Ibook g4 for years now and its never failed me untill roughly 5 months ago when I tried to turn it on and I got 3 beeps on start up (apparently no good banks).
Ive looked around and its something to do with my Ram. Ive looked inside and it looks like that i have built in Ram as there are no ram sticks inside, otherwise id simply pull them out and reposition as seen on other articles. Ive also been quoted 50 pound from a local shop to just diagnose the problem!
Ive seen that on ebay people are fetching 80 - 100 pound for faulty G4's, but not sure what to do. So my questions to you are:
- Should I try and get it fixed, will this be expenisve, is it worth it for this product, and where do I get it fixed?
- Does anywhere trade in macs towards a new one?
- Should I just put it on ebay and hope for the best?
Not sure what to do or who to turn to but I cant leave the thing lying there much longer as its served me well for years!
Thanks in advance for any of your ideas
Kerrie

Hi, and welcome to Apple Support Communities.
If there is no good RAM and there is no RAM installed in the one user-accessible RAM slot, then that means that the built-in RAM which is soldered to the logic board has failed. The iBook is not worth the price of the repair.
You could sell it on eBay, but you might get more out of it if you disassemble it and sell the parts. Also, if you can get the battery to charge, I would suggest charging it up until two lights flash on the battery indicator (which will set it up for storage), so you can sell the battery, too.
Since I don't know which exact model it is, check out iFixit's index page for G4 iBooks, and get ready with a screwdriver and spudger.
http://www.ifixit.com/Device/iBook_G4
Good luck!

Similar Messages

  • I have an old iBook G4. What is the most recent Safari I can download?

    I have an old iBook G4. What is the most recent Safari I can download?

    Hi, and welcome to Apple Support Communities.
    The newest version I can find that will work with Mac OS X 10.4.11 is Safari 4.1.3:
    http://mac.oldapps.com/safari.php?old_safari=11

  • I purchased books from iTunes and my iPhone 3G is incompatible with iBooks. What do I do?

    I don't know what to do! I purchased a few books on iTunes and I found out afterwards that you can use only iBooks to read the books. My iPhone is 3G and therefore incompatible with iBooks. What do I do? I want to read my books, but it doesn't seem possible. HELP!

    Your phone is jailbroken. You can not get help here.

  • HT5557 I no longer have a list of my iBooks. What happened?

    The list of books I have purchased no longer appears when I log on to iBooks.  What happened?

    Photoshop CC needs at least OSX 10.7-10.9
    You may be able to install and run it on 10.6.8, but as I understand it the rules for generating thumbnails has changed with Apple and CC writes them to suit the required OSX.
    Photoshop CS6 will always give you image thumbnails but CC and CC 2014 have had thumbnails generated differently for the required OSX.
    You will have to upgrade to 10.7,10.8, or 10.9
    My file saving preferences are set like this:

  • Book store form saudi arabia would to publish the books through ibooks store what is the roles

    Dear's
    Greeting
    we are a book store located in Riyadh KSA we wuld to publish our books through ibooks store
    what is the regulation ?
    Thanks in advance

    Have a look at these two pages (there isn't currently an iBookstore in Saudi Arabia so you won't be able to sell them in your own country, only those listed on the second link) :
    Selling in the iBookstore : http://www.apple.com/itunes/working-itunes/sell-content/books/
    Authors and Publishers FAQ : http://www.apple.com/itunes/working-itunes/sell-content/books/book-faq.html

  • Using Google GWT to create (Dashcode) widgets for iBook Author  I would like to embed interactive widgets in iBooks using iBookAuthor. The widgets in question started life in Java but GWT has allowed them to be converted to javascript and to run on web pa

    I would like to embed interactive widgets in iBooks using iBookAuthor. The widgets in question started life in Java but GWT has allowed them to be converted to javascript and to run on web pages (for example, http://softoption.us/content/node/437 scroll to the bottom). In theory, iBookAuthor can bring in most html5, and much javascript. The technique is to wrap the html in a folder, with 2 extra files, a plist and a default png and then change the extension of the folder to ‘.wdgt’. This is the technique for making Dashboard widgets for the Mac, and Apple even have the Dashcode software to do it. So what you really do is to make a Dashboard widget, then iBookAuthor can import it.  So far, so good. And some  folk have been doing this, for example http://www.prweb.com/releases/2012/2/prweb9242432.htm http://www.panophoto.org/forums/viewtopic.php?f=64&t=10417&p=158330#p158423 However, if you start with GWT and create a single page with one button and a Hello World, compile it, and get the WAR file (I use Eclipse here)… the Safari browser and others will run it properly (even on an iPad). Then if you wrap it, a proper Dashboard widget is created, which runs properly on a Mac. Then if you go to iBookAuthor and put a custom widget in the Text, then drag it in. It is accepted by the text and shown as being there. However, if you use Preview to look at it on an iPad, it is gone (or was never there in the first place). Anyone any ideas on this? [And iBook Author seems to give no warnings.] The widget is at https://dl.dropbox.com/u/46713473/Test6.wdgt.zip I have bells and whistles that I’d like to get into an iBook!
    Thanks for any insights.
    Martin

    I do have a little to add, which might help someone. Indeed, opening a blank page and dragging the widget straight in seems good in difficult cases. But, actually, I was also able to insert successfully from the Toolbar especially to blank pages. So, it may have been something to do with the columns and stuff like that. Anyway back then the insertion would show in iBooks Author but not in the Preview on the iPad. I moved on to actual Google Web Toolkit output javascript. Basically I had three at hand to try: a Hello World with a button which went straight it, one of moderate complexity, (for example with a built in Lisp interpreter), which also went straight in, and finally a more complex one that initially was rejected by iBook Author. Author complained that there was an unsupported media file (of course, Author does not tell you which one it is, that would be too easy). [Remember, this was a proper working Dashboard widget which could be installed on a Mac]. Among other things I had read remarks about .gif files. When looking through the GWT war directory at the actual javascript etc files, I noticed there were two gifs there one called ‘clear.cache.gif ‘  and a second one called  ‘0F89659FF3F324AE4116F700257E32BD.cache.gif’. (Now, there is obfuscation so the numbers here may be different from case to case.) The clear.cache.gif did not seem to be anything special. But the other one is an animation. It is three little boxes that twinkle (rather like a waiting spinning cursor).  So, I opened that file and saved it to itself (that picks the top frame of the animation and saves only that, leaving you with an unanimated gif). The resulting widget drags and drops into iBooks Author (and seems to work properly at a quick glance). So, if you are having trouble with ‘unsupported media files’ converting animated gifs into unanimated gifs might help in some cases.

  • Satellite X200-25H - 3 beeps on start up and wont boot-up

    Hi guys, I'm looking for a little advice before I get in touch with Tosh, it might be something I can fix myself hopefully.
    I Have a slight issue with my laptop at present. I've turned it on this morning and received 3 beeps on start up (a quieter beep pause then loud beep pause then another loud beep) and fails to boot. I have the power, battery and standby lights on lit and the fans appear to be whirling ever so slightly but I cant get no POST or the Toshiba Screen to appear. On the surface it looks like a hardware fault, the thing is in the few years I've had this laptop, I've not experienced any issues what so ever.
    It was fine shutting down last night, the error seems to have appeared from nowhere.
    Any idea what these 3 beeps could point to? I've had a quick look this morning ie re-seating the RAM and Hard Drives but I got fed up trying to figure out which of the 100 more screws I needed to undo to get to the GPU's and CPU haha. Just looking for a little direction.
    Kind Regards
    Tony
    Message was edited by: TonyTurbo

    Hi
    Yes, the single motherboard is very expensive so if warranty is not valid anymore then its not worth to spend the money only for new mobo.
    >>It is unfair that after spending lot of cash for the notebook, it didn't last longer than 3 1/2 years completely disappointed with Toshiba now.
    Guess what? My dad bought a notebook from another manufacturer; the notebook did not boot up after 3 month of usage. Fortunately the warranty was still valid.
    So its just a bad luck dude. Notebook can start to malfunction after some days/weeks of usage of after years or it will run properly the whole time.
    Ive got two Toshiba notebooks. Until now everything works properly.

  • Safari problem:  when I switch back into safari from another application, the menu bar comes up but no tabs or windows.  What's going on?  Just started yesterday.  I have found a workaround: when I Command Tab back to safari, I hit command T to open a new

    Safari problem:  when I switch back into safari from another application, the menu bar comes up but no tabs or windows.  What's going on?  Just started yesterday.  I have found a workaround: when I Command Tab back to safari, I hit command T to open a new tab and Command W to close it, and my other tabs are visible.
    I have tried shutting down, closing tabs, with no success.  What's going on and how can I fix it?
    Thanks,
    Cindi B
    PS:  I'm not sure of the actual OS level, but I have not allowed it to upgrade to Maverick yet; concerned about it because of a few things I've read...

    A Safari extension or third party plugin may be causing the menu bar issue.
    From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test. If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.
    If it's not an extensions issue, try troubleshooting third party plug-ins.
    Back to Safari > Preferences. This time select the Security tab. Deselect:  Allow plug-ins. Quit and relaunch Safari to test.
    If that made a difference, instructions for troubleshooting plugins here.
    As for which OS X is installed.
    Click the Apple () menu top left in your screen. From the drop down menu click About This Mac.
    The version is noted there.
    v10.6 Snow Leopard v10.7 Lion  v10.8 Mountain Lion
    It's your choice whether or not to upgrade to Mavericks. If you decide to do this, make sure your Mac meets the requirements noted here.

  • My iPod touch 5th generation had white screened an it won't let me rest it by holding down the home button an the power button for ten seconds I've pulled it in to iTunes an its not being detected what can i do as its starting to over heat?

    my iPod touch 5th generation had white screened an it won't let me rest it by holding down the home button an the power button for ten seconds I've pulled it in to iTunes an its not being detected what can i do as its starting to over heat?

    If you can't get it to shut down or restart when holding down the Home and Sleep/Wake buttons and you can't get it recognized in iTunes to restore it, the iPod may have suffered a hardware failure and will need to go to Apple for service. Someone else here may have additional suggestions, though.
    There is no "fifth generation" iPod touch, by the way, just for the sake of clarity; not yet, anyway.
    Regards.

  • What does it mean when I start my computer and there is a file folder with a question mark?

    What does it mean if I start my computer and there is a file folder with a question mark blinking?

    That Disk 1/ Mac OS is the install DVD not the hard drive. Your hard drive is not recognized which would mean it's probably dead.
    For a new hard drive try Newegg.com http://www.newegg.com/Store/SubCategory.aspx?SubCategory=380&name=Laptop-Hard-Dr ives&Order=PRICE
    Or OWC  http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/
    Here are instructions on replacing the hard drive in a MacBook with a removable battery. http://creativemac.digitalmedianet.com/articles/viewarticle.jsp?id=45088
    Here are video instructions on replacing the hard drive on the Aluminum Unibody http://eshop.macsales.com/installvideos/macbookpro_13_unibody_hd/
    Here are video instructions on replacing the hard drive on the White Unibody http://eshop.macsales.com/installvideos/macbook_13_09_unibody_hd/
    If you don’t have the tools to open up the MacBook OWC has a set for $5
    http://eshop.macsales.com/item/OWC/TOOLKITMHD/

  • What parameters determine Planned order production start and end dates?

    Greetings
    We are using the graphical planning table @ MF50 to firm Planned Orders (Basically checking off "Firm Order" field within the Planned Order). We are on ECC 6.0
    Whenever I backflush, the production start and end dates get overwritten (The Basic dates do not change).
    I would like to prevent this. Can someone advise me on what parameter controls how the production start and end dates getting changed?
    Thank you
    Hanarin

    Hi,
    Calculating production dates ( Lead time scheduling) are explained in detail in the SAP help URL as below:
    If "Automatci Scheduling indicator" is set in the customizing for scheduling parameters then after every change relevant to scheduling, the production order is also automatically rescheduled before saving.
    You need to check these settings.
    regards
    Datta

  • HT1414 I am trying to restore my Ipod touch 5 generation but I am receiving an error message that says  your Ipod can not be restored you need your password I don't know my password so I don't know what to do. I have started the procedures 3 times but no

    am trying to restore my Ipod touch 5 generation but I am receiving an error message that says  your Ipod can not be restored you need your password I don't know my password so I don't know what to do. I have started the procedures 3 times but no luck till now

    If it is asking for the screen-lock passcode then:
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.
    Otherwise follow varjak paw recommendation

  • IMac makes a loud beep on start up, won't load past the blue screen and the black ticking dial appears every few seconds in centre of screen.

    Urgent help!
    Out of the blue my mac lost the mouse cursor even though it had connection so I rebooted only for the mac to make a loud beep on start up then get stuck at the blue loading screen. It won't load past the blue screen. I've tried to reboot holding down the shift key but no change. I've also shut down, unplugged the main for 15 seconds, re plug and wait 5 seconds before starting up again but no change. Does anyone have any suggestions?
    PS: I'm not too sure which systems I am running without being able to check in about this mac. I bought my imac in January or February 2011 if that helps.

    The power on self-test resides in the ROM of the computer. This test runs whenever the computer is turned on after being fully shut down (the power-on self-test does not run if the computer is only restarted).
    If a fault is detected during the test, you will not hear a normal startup chime. Instead, the system will beep as explained below. If you experience one of these beeps, you may call your Apple Authorized Service Provider for additional troubleshooting assistance.
    1 beep = no RAM installed
    2 beeps = incompatible RAM types
    3 beeps = no good banks
    4 beeps = no good boot images in the boot ROM (and/or bad sys config block)
    5 beeps = processor is not usable
    http://support.apple.com/kb/HT1547

  • Three beeps when starting up from a disc

    three beeps when starting from a disc

    If your MBP came with lion or mountain lion.  You will need to reboot the computer with a bootable Lion DVD. Unlike previous versions of Mac OS X, Lion (OS X 10.7) doesn’t ship with a bootable disc—it’s available only as an installer app downloadable from the Mac App Store.  Once you have attained one of these disks. Boot and enter utilities and reformat the hard disk. Ensure that "Guid" is selected under options and that you also select "Mac OS Extended - Journaled. Hopefully before you do any of this you have a very recent time machine backup.
    Once reformatted the computer should startup from the Lion Boot DVD without the beeps and you can reinstall the OS and restore your backup.
    Good luck

  • What is a mackeeper?  It started showing on my screen last week. My macpro is only 2 months old.

    what is a mackeeper? It started showing on my screen last week. My laptop is only 2 months old. It is telling me to download it but I went online and it says that this is a malware.. is it? And why do I need it?

    Downloading Mackeeper is like giving your MBP a STD.  You do not need it and will be of no value to you.  They promise much and give you grief.  Spare yourself.  Anything thing that they claim, you can do better, FOR FREE!
    Ciao.

Maybe you are looking for

  • PPPI PI sheet to trigger HUM goods receipt and PI order confirmation

    Hi gurus, We're running into a problem when setting up our PI sheets. We're using Handling Unit Management for our finished products and would like to use the PI sheet to post both the goods receipt of handling units and the order confirmation. For n

  • Can't make "Back to my mac" work for me.

    Hello world I tried everything! Set routers on UPnP. Updated Firmware. Enabeld sharing. Logged out an in .Mac on all my Computers (same .Mac-account). Nothing! B2MM just won't work. Home mac doesn't show up on office mac and the other way round. I'll

  • Saving report in text file...

    Can anyone tell me how can i save the includes used in my program into text file and save them in some folder as individual textfile ? Which Function module will be used??urgently required..

  • Error Message When Uninstalling Old iTunes for 7.7

    When uninstalling (as a natural part of the process of installing 7.7) a message comes up saying that it cannot find iTunes.msi and asks me to find the file. I have no idea where it is. It isn't in either of the two suggested locations. Any help is m

  • 8.01 to 8.02 problems

    I'm using DW 8.0.1 on my G4, DW 8.0.2 on my MacBook. The 8.0.1 v side menu that appears on the right has get/put arrows that allow putting of individual files. The 8.0.2 version does not, and it's creating a problem. On the 8.0.2 version I have selec