Ibook is not working with the new ios 5.01 any ideas why?

After updating to ios 5.01, Ibook is not working.
When selecting Ibook, the software tries to open and then closes immediately.
Any solutions?
Thanks

Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Quit IBooks and restart. Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus (-) sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

Similar Messages

Why do some apps not work with the new ios update

i tried deleting andstarting over again(e.g : Hay day) but still ! I'm reallllllllly getting sick and tired of this ... Not even to mention how many times the browser(Safari) has stopped working and froze since i started typing this message ....

you may need to update the particular apps that are causing you crashes. Go to the app store and tap "updates".
You can also do this via itunes, click on "apps" on the left, then updates on the top and update all. then re-sync your phone.
Hope this helps!

Fast dial (visual bookmarks) does not work with the new 5.0 upgrade. How do I correct this issue

fast dial (visual bookmarks) does not work with the new 5.0 upgrade. How do I correct this issue Asked this question yesterday. I desperately need info, will I ever be able to use fast dial again?

I tried it and it WORKED....I even tried the other version BEFORE this one and it didn't work so I tried yours and it worked like a charm so THANKS brother....

HT1619 my remote is not working with the new imac 27" :(

my remote is not working with the new imac 27" i do not know even if new imac has infrared at all , pcworld shop said yes it should work . but hey i tried everything including security setting checks

<http://store.apple.com/us/product/MC377LL/A/apple-remote>
"Not compatible with MacBook Pro with Retina display or iMac (Late 2012)."
There are some USB IR receivers that allow the Apple Reomote to work with software such as Remote Buddy
<http://www.iospirit.com/products/remotebuddy/>

The program vectorworks 2008 (not 2009) does not work with the new operating system Mavericks, which is a disaster because it forces us to change the program, and is very expensive. Apple should fix this problem

The program vectorworks 2008 (not 2009) does not work with the new operating system Mavericks, which is a disaster because it forces us to change the program, and is very expensive. Apple should fix this problem

Why should Apple fix the problem? Maybe you should consider NOT upgrading if an expensive piece of (obsolete) software you're running won't work with it...

My smart cover is not working with the new iPad

The smart cover for my iPad 2 won't work with the new iPad. I have verified the toggle is enabled in settings. Does anyone have a solution or is experiencing the same issue? Thanks :)

It's the polarity of the magnet in the older Apple Smart Covers (and many third-party cases and covers) that is causing the problem. All you need to know about this situation is detailed at my blog post:
http://markshangout.com/blog/2012/3/17/ipad-3-smart-cover-sleepwake-feature-not- working.html
Mark

Text to speech not working with characters such as quotes? Any ideas

text to speech not working with characters such as quotes? Any ideas

Hi linz-kirby
I posted this (link) https://discussions.apple.com/message/27015600?ac_cid=op123456#27015600

The character count when sending a message doesn't work with the new iOS 5.

Hi,
After I upgraded to the new iOS 5, the message counter no longer appears. I've gone into the settings to verify that it is turned on. I've turned it off and then back on. I've rebooted the phone, but to no avail. Has anyone else encountered this new "feature"?
Thanks,
Allan

The only way I can get character count back is to disable both iMessage and MMS. I agree it is annoying. iMessage only works between iOS 5 devices, and since the whole world does not use Apple products, it's not like I still won't be sending plain old SMS text messages to people. If you type more then the SMS character limit, AT&T still happily sends it, their servers just truncate it, so the character count feature is hardly an outdated or pointless feature.
I have been sending fewer and fewer texts though anyway, and using email instead. but this just pushes me further away from texting. Most of my work texts are to blackberry users, so no iMessaging with them, but having to go back and forth into settings to enable/disable iMessage means I will likely just leave iMessage off all the time anyway.

I have upgraded to the new Firefox but removed it because my DAP premium will not work with the new version. Am I doing something wrong?

DAP Premium seems not to be compatible with the new version

Dear Old Bob..I enjoyed that! I and thanks so much ...I would have done it if I could have done it but I was blocked by Photoshop at every stage! Thankfully my own IT Guru and friend came to the rescue remotely last night and has down-loaded it. But it took him quite a bit of time.
As XP is faded out, there will be an awful lot of people like me complaining.
But truth is my problems are only at a start! About 30 prints (some not yet on my 'blog' (juliamatcham.wordpress.com) all have varying settings which I have noted. Everything depends on these settings.
All are Apple RGB (although my computer is a PC) and they were all set for my printer Epson Photo 1800. Also they were set at varying settings...Standard or Vivid 1.5, 2.5 whatever suited the design.
These settings appear not to exist on CS2 which is a nightmare for me as each print was carefully proofed with a great deal patience and at some expense as in the end one has to use expensive paper even for proofing.
If you have any hints for how to translate these old settings...I would kiss your feet!
Just looking through how things work, I can't understand why I can't change my first printing option to landscape ...everything esle so far seems comprehensible.
I do hate change!
Meanwhile, thanks so much to Curt, Noel, Nahraka and Old Bob for cheering me on. I am obviously going to be back asking more questions about CS2!
Julia

A website that i use quite frequently will not work with the newer versions of firefox. Is there a compatability mode of some way to get the newer version to work?

All the website says is this browser is not supported. Only version 3.5 is. I can list the url because it is a work url

You can install the portable Firefox 3.6.x version to access websites that do not work with Firefox 5+.
*http://portableapps.com/apps/internet/firefox_portable#legacy
*http://portableapps.com/apps/internet/firefox_portable/localization#legacy36

My mission control key does not work with the new Mac update

The key on the keyboard doesnt work, neither does the button on my dock. Any help?
P.S. is anyone else having as much trouble as I am with the new update?

The pre-2006 Mac models this forum covers cannot run a Mac OS high enough to have Mission Control. If you can identify your Mac to us we can get you moved to a more active forum.

Before I downloaded the latest version of Firefox I could us the Norton Idnetity Safe. It will not work with the new version. What do I have to do to make it work?

I am not sure if this is a plugin or extension. All I know is that it worked with the old version of Firefox. It is very important to me to be able to use this feature. Any help would be appreciated.

THIS ISSUE IS RESOLVED FOR ME.
When I opened this pop-up to view the settings (File > Page Setup > "Format & Options": Scale ), the Scale value was 40%. Changing it to 100% corrected the issue I observed.
To my knowledge, I have not been inside this pop-up window before to set the Scale option. Could this value be affected by other actions within Firefox? I noticed this while using v12 which was installed 24Apr2012.I know it worked correctly since that installation, so why did the Scale value change?
UPDATE: I just realized that the Scale option in print preview sets the Scale value in the settings. NOTE TO ALL: This is a sticky setting, not just a setting for a specific output request.

Why is my iSight camera is not working with the new Mac Pro?

I connected the iSight camera which is a FireWire 400 into a Sonnet FireWire 800 adapter, and connected that into a FireWire to ThunderBolt adapter and plugged directly into the Mac Pro running Mave. I receive power, noted by the green light coming on, but the computer does not recognize a camera. Does anyone have an idea why this is.

We are all busy with many other problems in Pages 5.
Unless you have found some real reason to use Pages 5 just go back to Pages '09 which should still be in your Applications folder, until Apple sorts this all out.
Peter

Lexmark P6250 scanner not working with iMac after recent software update, any ideas?

The scanner has always worked with the iMac but after a recent software update only the printer works now. I have searched the apple communities boards and have downloaded a variety of drivers suggested but nothing has solved the issue.
When I load print and scan from system preferences, I select to open the scanner and the process just hangs. I can see the scanner and am able to select to open but not able to scan.
Any ideas on how to resolve?

Unfortunately I have tried this and I have downloaded new drivers and restarted both the iMac and printer/scanner numerous times but I still only have the printer working.
I have tried to use preview via system preferences, print and scan and the when I select open scanner for preview the application hangs. I have also tried to use image capture and there is an error when selecting the scanner device of "Lexmark Language Error". When selecting overview within image capture I am advised that the size tryng to be scanned is too large when nothing has been selected and the default setting are standard size and then image capture hangs.
All features were working fine prior to conducting a software update about 8-10 weeks ago. I have downloaded further software updates which I had hoped would sort this issue but it hasn't.

MY WHATSAPP HAUTELOOK FACEBOOK APPLICATIONS ARE NOT WORKING WITH THE NEW UPDATE iOS 7 ITS DRIVING ME CRAZY! HOW CAN I FIX IT?

I DOWNLOADED THE NEW UPDATED VERSION FOR THE IPHONE !!!
AND MY APPLICATIONS ARE NOT WORKING AT ALL
WHENEVER I ENTER TO WHATSAPP A MESSAGE POPS UP FROM NOWHERE SAYING SOMETHING ABOOUT PUSH UP NOTIFICATION!!
AND THAT I SHOULD CONNECT IT TO ITUNES, THEN I CONNECT IT TO ITUNES AND ITUNES IS NOT LETTING ME SIGN IN WITH MY APPLE ID ITUNES IS NOT WORKING/!!!
ALSO WHENEVER I OPEN HAUTELOOK APP ON THE IPHONE IS FREEZING MY PHONE WITH THE PUSH UP NOTIFICATION WINDOW, AND I CLICK OK AND IT STILL APPEARS OVER AND OVER AGAIN
PLZ HELP ME!!!!!!!!!!!!!!!!!!!!!

If you do not have enough space, then you would have to free up more space.
You can also update via itunes on your computer.

Ibook is not working with the new ios 5.01 any ideas why?

Similar Messages

Maybe you are looking for