IBook keeps going blank or doesn't turn on

I have an iBook G4 and it the screen has been going blank but the computer is still on. Sometimes it just won't turn on at all. I have been having to pull out the battery and reset it. I have repaired the permissions and emptied the Cache. Would my battery not holding a charge have anything to do with it. I have to keep the computer plugged in all the time, if not it goes dead within 5 minutes.

kimberleekay wrote:
my charger won't charge the battery. It's been at 95% for several hours. Any other suggestions?
That is normal. Check out this Apple Knowledge Base article on the subject:
http://support.apple.com/kb/TS1909
I would suspect a faulty logic board in the iBook.

Similar Messages

  • My iPad keeps locking itself every few seconds, any ideas how to fix it... Drives me mad having to put my pass code in all the time and the screen keeps going blank :( HELP!

    My iPad keeps locking itself every few seconds, any ideas how to fix it... Drives me crazy as the screen keeps going blank and I have to constantly put in my pass code every few seconds. Can someone help me out please. The pass code lock is set at 10 minutes but it's happening every few seconds :(

    I've run into the issue and it seems to be related to an app not fully supporting the iOS you're on, the reboot doesn't usually solve it.
    I've solved it in the following manner(s):
    1) Backup the device to iCloud, then erase the iPad (Content and Network Settings).
    2) Setup the iPad and choose to restore from iTunes/iCloud Backup (wherever you backed it up)
    3) Perform any software updates
    I have not tried simply performing the software updates (which may fix it, but if it doesn't you won't be able to perform the above steps).
    Enjoy.

  • Zenworks window keeps going blank

    Hey all,
    Running ZCM server 10.3.2 and agent version 10.3.2.41992
    Bundle Management 10.3.2.1088
    Content Distribution point 10.3.2.948
    Image Management 10.3.2.335
    Inventory Management 10.3.2.647
    Policy Management 10.3.2.7941
    Remote Management 10.3.2.893
    User Management 10.3.2.948
    Our zenworks window on various windows 7 32bit SP1 devices keeps going blank (drops off the zone If we re-register the machine, it works again but this keeps happening across random devices, both desktops and laptops
    The laptops use wireless most of the time but occasionally use ethernet connections too. our DHCP leases are for 1 day
    I had a look through the logs and the logs give this message most days:
    [DEBUG] [10/19/2011 07:16:09.953] [1560] [ZenworksWindowsService] [10] [] [ZMD] [] [Looking for Capability: registration] [] []
    [DEBUG] [10/19/2011 07:16:09.953] [1560] [ZenworksWindowsService] [10] [] [ZMD] [] [Capability: registration] [] []
    [DEBUG] [10/19/2011 07:16:09.953] [1560] [ZenworksWindowsService] [10] [] [ConnectMan] [] [FindFirstContent()] [] []
    [DEBUG] [10/19/2011 07:16:09.953] [1560] [ZenworksWindowsService] [10] [] [ConnectMan] [] [ ] [] []
    [DEBUG] [10/19/2011 07:16:09.953] [1560] [ZenworksWindowsService] [10] [] [ConnectMan] [] [ ] [] []
    [DEBUG] [10/19/2011 07:16:09.953] [1560] [ZenworksWindowsService] [10] [] [ConnectMan] [] [ Could not find host: zenworks.<removed>] [] []
    [DEBUG] [10/19/2011 07:16:09.963] [1560] [ZenworksWindowsService] [10] [] [ConnectMan] [] [Trying to locate source location: https://zenworks.<removed>/zenworks-registration/registration] [] []
    [DEBUG] [10/19/2011 07:16:09.963] [1560] [ZenworksWindowsService] [10] [] [ConnectMan] [] [ Host name to resolve: zenworks.<removed>] [] []
    [DEBUG] [10/19/2011 07:16:09.963] [1560] [ZenworksWindowsService] [10] [] [ConnectMan] [] [ Adding host: zenworks.<removed>, status: Unknown] [] []
    [DEBUG] [10/19/2011 07:16:09.963] [1560] [ZenworksWindowsService] [10] [] [ConnectMan] [] [ Host: zenworks.<removed>, IP address: 172.16.0.37] [] []
    [DEBUG] [10/19/2011 07:16:09.963] [1560] [ZenworksWindowsService] [10] [] [ConnectMan] [] [ Adding IP address: 172.16.0.37] [] []
    [DEBUG] [10/19/2011 07:16:09.973] [1560] [ZenworksWindowsService] [10] [] [ConnectMan] [] [ Adding IP Uri https://172.16.0.37/zenworks-registration/registration status: Unknown] [] []
    [DEBUG] [10/19/2011 07:16:09.973] [1560] [ZenworksWindowsService] [10] [] [ConnectMan] [] [ Pinging location: https://172.16.0.37/zenworks-registration/registration] [] []
    any ideas why most days it is trying to reregister??
    Thanks

    Lost Registration is something that I used to see now and then, but seem
    quite uncommon now on current code, though I dont recall any specific
    bug/fix.
    Below are a couple of scripts that can be called from login scripts to
    address a couple different registration issues.
    Script to Fix Duplicate GUIDs.
    ================================================== ============================================
    @echo on
    FOR /F "tokens=*" %%A IN ('type "%zenworks_home%\conf\deviceguid" ^|
    find /i /c "57228a9d13075b4ab0fedcd55d4b5d6c"') DO SET act=%%A
    if %act% == 0 goto :nothing
    zac reg -g -u administrator -p secret http://192.168.1.111
    exit
    :nothing
    ================================================== =============================================
    Script to Fix Unregistered Devices
    ================================================== ===========================
    @echo off
    FOR /F "tokens=*" %%A IN ('zac zc -l ^| find /i /c "Role:
    CONFIGURATION"') DO SET act=%%A
    if %act% == 0 goto :zacreg
    exit
    :zacreg
    zac reg -g -u administrator -p secret http://192.168.1.111
    ================================================== ============================================
    On 10/25/2011 11:06 PM, wcc admin wrote:
    >
    > Hey all,
    >
    > Running ZCM server 10.3.2 and agent version 10.3.2.41992
    > Bundle Management 10.3.2.1088
    > Content Distribution point 10.3.2.948
    > Image Management 10.3.2.335
    > Inventory Management 10.3.2.647
    > Policy Management 10.3.2.7941
    > Remote Management 10.3.2.893
    > User Management 10.3.2.948
    >
    > Our zenworks window on various windows 7 32bit SP1 devices keeps going
    > blank (drops off the zone If we re-register the machine, it works again
    > but this keeps happening across random devices, both desktops and
    > laptops
    >
    > The laptops use wireless most of the time but occasionally use ethernet
    > connections too. our DHCP leases are for 1 day
    >
    > I had a look through the logs and the logs give this message most
    > days:
    >
    > [DEBUG] [10/19/2011 07:16:09.953] [1560] [ZenworksWindowsService] [10]
    > [] [ZMD] [] [Looking for Capability: registration] [] []
    > [DEBUG] [10/19/2011 07:16:09.953] [1560] [ZenworksWindowsService] [10]
    > [] [ZMD] [] [Capability: registration] [] []
    > [DEBUG] [10/19/2011 07:16:09.953] [1560] [ZenworksWindowsService] [10]
    > [] [ConnectMan] [] [FindFirstContent()] [] []
    > [DEBUG] [10/19/2011 07:16:09.953] [1560] [ZenworksWindowsService] [10]
    > [] [ConnectMan] [] [ ] [] []
    > [DEBUG] [10/19/2011 07:16:09.953] [1560] [ZenworksWindowsService] [10]
    > [] [ConnectMan] [] [ ] [] []
    > [DEBUG] [10/19/2011 07:16:09.953] [1560] [ZenworksWindowsService] [10]
    > [] [ConnectMan] [] [ Could not find host: zenworks.<removed>] [] []
    > [DEBUG] [10/19/2011 07:16:09.963] [1560] [ZenworksWindowsService] [10]
    > [] [ConnectMan] [] [Trying to locate source location:
    > https://zenworks.<removed>/zenworks-registration/registration] [] []
    > [DEBUG] [10/19/2011 07:16:09.963] [1560] [ZenworksWindowsService] [10]
    > [] [ConnectMan] [] [ Host name to resolve: zenworks.<removed>] [] []
    > [DEBUG] [10/19/2011 07:16:09.963] [1560] [ZenworksWindowsService] [10]
    > [] [ConnectMan] [] [ Adding host: zenworks.<removed>, status: Unknown]
    > [] []
    > [DEBUG] [10/19/2011 07:16:09.963] [1560] [ZenworksWindowsService] [10]
    > [] [ConnectMan] [] [ Host: zenworks.<removed>, IP address:
    > 172.16.0.37] [] []
    > [DEBUG] [10/19/2011 07:16:09.963] [1560] [ZenworksWindowsService] [10]
    > [] [ConnectMan] [] [ Adding IP address: 172.16.0.37] [] []
    > [DEBUG] [10/19/2011 07:16:09.973] [1560] [ZenworksWindowsService] [10]
    > [] [ConnectMan] [] [ Adding IP Uri
    > https://172.16.0.37/zenworks-registration/registration status: Unknown]
    > [] []
    > [DEBUG] [10/19/2011 07:16:09.973] [1560] [ZenworksWindowsService] [10]
    > [] [ConnectMan] [] [ Pinging location:
    > https://172.16.0.37/zenworks-registration/registration] [] []
    >
    > any ideas why most days it is trying to reregister??
    >
    > Thanks
    >
    >
    Craig Wilson - MCNE, MCSE, CCNA
    Novell Knowledge Partner
    Novell does not officially monitor these forums.
    Suggestions/Opinions/Statements made by me are solely my own.
    These thoughts may not be shared by either Novell or any rational human.

  • My screen keeps going blank still have sound

    my screen keeps going blank but still have sound

    Try:
    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes      
    - Restore to factory settings/new iOS device.                       
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
      Apple Retail Store - Genius Bar                                                              

  • IPhone screen keeps going blank

    My iPhone screen keeps going blank. If I reset the phone, it comes back on but after a while, it goes blank again. I don't know what to do?

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.

  • Desktop keeps going blank

    can anyone explain why I keep losing my desktop photo.?  Everytime I open iphoto or connect to the internet my desktop goes blank.  I'm not sure if this is a software issue.  I use OSX version 10 on a macbook pro

    Hi , Welcome to the HP Forums! 
    It is a great place to find answers and  information! 
    For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide. Learn How to Post and More I grasp that your display is turning black or blank after a few moments of use. If you connect an external monitor it works fine. You believe it is the converter but were unable to locate one to purchase.  Here is a link to HP Notebook PCs - Troubleshooting a Notebook LCD Panel Issue (Windows 8/8.1, 7) that may help. Here is a link to  the  HP Pavilion dv6 Entertainment PC Maintenance and Service Guide. Please note chapter 4, page 24, display assembly to acquire the part number. Here are two links where you can purchase HP parts.HP Parts Store HP PartSurfer. You can also do a web search with the part number to try and locate one.  To say thanks for replying please click the thumbs up button below. If this overcame your difficulty please choose solution provided to assist other posters in locating this information.   Good Luck! 

  • [SOLVED] Once screen goes blank there's no turning back

    Hello.
    If I let the screensaver to blank my screen, I can't wake it up. The screen doesn't turn off, it just stays blank.
    I tried pressing Ctrl + Alt + Backspace, changing to a console with Ctrl + Alt + F1, F2, etc but nothing. I have to power off the laptop or reboot it.
    If I lock the screen with Ctrl + Alt + l I get the same result.
    I'm not sure what info would you need to diagnose this. Any ideas?
    Dell XPS 15
    Gnome-shell 3.2
    Last edited by martin_legion (2012-04-30 14:36:59)

    I think ACPI is not the issue here. I did go into bios to check, but I don't have any options related to ACPI (HP bios )
    here is my dmesg:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 3.1.4-1-ARCH (tobias@T-POWA-LX) (gcc version 4.6.2 (GCC) ) #1 SMP PREEMPT Tue Nov 29 08:55:45 CET 2011
    [ 0.000000] Command line: root=/dev/sda7 ro
    [ 0.000000] BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
    [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
    [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    [ 0.000000] BIOS-e820: 0000000000100000 - 00000000befc2000 (usable)
    [ 0.000000] BIOS-e820: 00000000befc2000 - 00000000bf6c2000 (reserved)
    [ 0.000000] BIOS-e820: 00000000bf6c2000 - 00000000bf7c2000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 00000000bf7c2000 - 00000000bf7ff000 (ACPI data)
    [ 0.000000] BIOS-e820: 00000000bf7ff000 - 00000000bf800000 (usable)
    [ 0.000000] BIOS-e820: 00000000bf800000 - 00000000c0000000 (reserved)
    [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed19000 - 00000000fed1a000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed1b000 - 00000000fed20000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    [ 0.000000] BIOS-e820: 00000000ffd00000 - 0000000100000000 (reserved)
    [ 0.000000] BIOS-e820: 0000000100000000 - 0000000138000000 (usable)
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] DMI 2.6 present.
    [ 0.000000] DMI: Hewlett-Packard HP EliteBook 8440p (VQ659EA#AB8)/172B, BIOS 68CCU Ver. F.20 09/05/2011
    [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    [ 0.000000] No AGP bridge found
    [ 0.000000] last_pfn = 0x138000 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 0FFC00000 mask FFFC00000 write-protect
    [ 0.000000] 1 base 000000000 mask F80000000 write-back
    [ 0.000000] 2 base 080000000 mask FC0000000 write-back
    [ 0.000000] 3 base 100000000 mask FC0000000 write-back
    [ 0.000000] 4 base 138000000 mask FF8000000 uncachable
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] last_pfn = 0xbf800 max_arch_pfn = 0x400000000
    [ 0.000000] initial memory mapped : 0 - 20000000
    [ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
    [ 0.000000] init_memory_mapping: 0000000000000000-00000000bf800000
    [ 0.000000] 0000000000 - 00bf800000 page 2M
    [ 0.000000] kernel direct mapping tables up to bf800000 @ 1fffc000-20000000
    [ 0.000000] init_memory_mapping: 0000000100000000-0000000138000000
    [ 0.000000] 0100000000 - 0138000000 page 2M
    [ 0.000000] kernel direct mapping tables up to 138000000 @ befbc000-befc2000
    [ 0.000000] RAMDISK: 37d9c000 - 37ff0000
    [ 0.000000] ACPI: RSDP 00000000000fc600 00024 (v02 HPQOEM)
    [ 0.000000] ACPI: XSDT 00000000bf7fe120 0008C (v01 HPQOEM SLIC-MPC 0000000F 01000013)
    [ 0.000000] ACPI: FACP 00000000bf7fc000 000F4 (v03 HPQOEM 172B 0000000F HP 00000001)
    [ 0.000000] ACPI: DSDT 00000000bf7d6000 203A2 (v02 HPQOEM 172B 00000001 INTL 20060912)
    [ 0.000000] ACPI: FACS 00000000bf760000 00040
    [ 0.000000] ACPI: HPET 00000000bf7fb000 00038 (v01 HPQOEM 172B 00000001 HP 00000001)
    [ 0.000000] ACPI: APIC 00000000bf7fa000 000BC (v01 HPQOEM 172B 00000001 HP 00000001)
    [ 0.000000] ACPI: MCFG 00000000bf7f9000 0003C (v01 HPQOEM 172B 00000001 HP 00000001)
    [ 0.000000] ACPI: TCPA 00000000bf7f7000 00032 (v02 HPQOEM 172B 00000000 HP 00000001)
    [ 0.000000] ACPI: SSDT 00000000bf7d3000 00135 (v01 HPQOEM SataAhci 00001000 INTL 20060912)
    [ 0.000000] ACPI: SSDT 00000000bf7d2000 00314 (v01 HPQOEM PtidDevc 00001000 INTL 20060912)
    [ 0.000000] ACPI: SLIC 00000000bf7d1000 00176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001)
    [ 0.000000] ACPI: DMAR 00000000bf7d0000 00080 (v01 INTEL CP_DALE 00000001 INTL 00000001)
    [ 0.000000] ACPI: SSDT 00000000bf7cf000 00A10 (v01 PmRef CpuPm 00003000 INTL 20060912)
    [ 0.000000] ACPI: SSDT 00000000bf7ce000 00288 (v01 PmRef Cpu0Tst 00003000 INTL 20060912)
    [ 0.000000] ACPI: SSDT 00000000bf7cd000 00225 (v01 PmRef ApTst 00003000 INTL 20060912)
    [ 0.000000] ACPI: ASF! 00000000bf7f8000 000A0 (v32 HPQOEM 172B 00000001 HP 00000001)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at 0000000000000000-0000000138000000
    [ 0.000000] Initmem setup node 0 0000000000000000-0000000138000000
    [ 0.000000] NODE_DATA [0000000137ffb000 - 0000000137ffffff]
    [ 0.000000] [ffffea0000000000-ffffea0004dfffff] PMD -> [ffff880133800000-ffff8801375fffff] on node 0
    [ 0.000000] Zone PFN ranges:
    [ 0.000000] DMA 0x00000010 -> 0x00001000
    [ 0.000000] DMA32 0x00001000 -> 0x00100000
    [ 0.000000] Normal 0x00100000 -> 0x00138000
    [ 0.000000] Movable zone start PFN for each node
    [ 0.000000] early_node_map[4] active PFN ranges
    [ 0.000000] 0: 0x00000010 -> 0x0000009f
    [ 0.000000] 0: 0x00000100 -> 0x000befc2
    [ 0.000000] 0: 0x000bf7ff -> 0x000bf800
    [ 0.000000] 0: 0x00100000 -> 0x00138000
    [ 0.000000] On node 0 totalpages: 1011538
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 5 pages reserved
    [ 0.000000] DMA zone: 3914 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 16320 pages used for memmap
    [ 0.000000] DMA32 zone: 761859 pages, LIFO batch:31
    [ 0.000000] Normal zone: 3584 pages used for memmap
    [ 0.000000] Normal zone: 225792 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
    [ 0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    [ 0.000000] PM: Registered nosave memory: 00000000befc2000 - 00000000bf6c2000
    [ 0.000000] PM: Registered nosave memory: 00000000bf6c2000 - 00000000bf7c2000
    [ 0.000000] PM: Registered nosave memory: 00000000bf7c2000 - 00000000bf7ff000
    [ 0.000000] PM: Registered nosave memory: 00000000bf800000 - 00000000c0000000
    [ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000
    [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
    [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
    [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
    [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000
    [ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed14000
    [ 0.000000] PM: Registered nosave memory: 00000000fed14000 - 00000000fed19000
    [ 0.000000] PM: Registered nosave memory: 00000000fed19000 - 00000000fed1a000
    [ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1b000
    [ 0.000000] PM: Registered nosave memory: 00000000fed1b000 - 00000000fed20000
    [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
    [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
    [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffd00000
    [ 0.000000] PM: Registered nosave memory: 00000000ffd00000 - 0000000100000000
    [ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff880137c00000 s80448 r8192 d21952 u262144
    [ 0.000000] pcpu-alloc: s80448 r8192 d21952 u262144 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
    [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 991565
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: root=/dev/sda7 ro
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 3901576k/5111808k available (4156k kernel code, 1065656k absent, 144576k reserved, 5288k data, 712k init)
    [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] Verbose stalled-CPUs detection is disabled.
    [ 0.000000] NR_IRQS:2304
    [ 0.000000] Extended CMOS year: 2000
    [ 0.000000] Console: colour VGA+ 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 32505856 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] Fast TSC calibration using PIT
    [ 0.003333] Detected 2526.853 MHz processor.
    [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5055.27 BogoMIPS (lpj=8422843)
    [ 0.000006] pid_max: default: 32768 minimum: 301
    [ 0.000093] Security Framework initialized
    [ 0.000098] AppArmor: AppArmor disabled by boot time parameter
    [ 0.000397] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.001338] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    [ 0.001737] Mount-cache hash table entries: 256
    [ 0.002070] Initializing cgroup subsys cpuacct
    [ 0.002096] Initializing cgroup subsys memory
    [ 0.002109] Initializing cgroup subsys devices
    [ 0.002111] Initializing cgroup subsys freezer
    [ 0.002113] Initializing cgroup subsys net_cls
    [ 0.002114] Initializing cgroup subsys blkio
    [ 0.002154] CPU: Physical Processor ID: 0
    [ 0.002156] CPU: Processor Core ID: 0
    [ 0.002161] mce: CPU supports 9 MCE banks
    [ 0.002171] CPU0: Thermal monitoring enabled (TM1)
    [ 0.002178] using mwait in idle threads.
    [ 0.003042] ACPI: Core revision 20110623
    [ 0.030575] ftrace: allocating 16313 entries in 64 pages
    [ 0.035109] DMAR: Host address width 36
    [ 0.035111] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
    [ 0.035116] IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c9008020e30272 ecap 1000
    [ 0.035118] DMAR: DRHD base: 0x000000fed93000 flags: 0x1
    [ 0.035123] IOMMU 1: reg_base_addr fed93000 ver 1:0 cap c9008020630272 ecap 1000
    [ 0.035124] DMAR: RMRR base: 0x00000000000000 end: 0x00000000000fff
    [ 0.035126] DMAR: No ATSR found
    [ 0.035646] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.068630] CPU0: Intel(R) Core(TM) i5 CPU M 540 @ 2.53GHz stepping 02
    [ 0.173987] Performance Events: PEBS fmt1+, Westmere events, Intel PMU driver.
    [ 0.173992] ... version: 3
    [ 0.173993] ... bit width: 48
    [ 0.173994] ... generic registers: 4
    [ 0.173996] ... value mask: 0000ffffffffffff
    [ 0.173997] ... max period: 000000007fffffff
    [ 0.173998] ... fixed-purpose events: 3
    [ 0.173999] ... event mask: 000000070000000f
    [ 0.194356] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.220645] Booting Node 0, Processors #1
    [ 0.220650] smpboot cpu 1: start_ip = 9a000
    [ 0.334067] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.353922] #2
    [ 0.353925] smpboot cpu 2: start_ip = 9a000
    [ 0.467273] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.487176] #3
    [ 0.487179] smpboot cpu 3: start_ip = 9a000
    [ 0.600527] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.607084] Brought up 4 CPUs
    [ 0.607088] Total of 4 processors activated (20223.92 BogoMIPS).
    [ 0.609380] devtmpfs: initialized
    [ 0.610261] PM: Registering ACPI NVS region at bf6c2000 (1048576 bytes)
    [ 0.611018] print_constraints: dummy:
    [ 0.611086] NET: Registered protocol family 16
    [ 0.611174] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    [ 0.611177] ACPI: bus type pci registered
    [ 0.611305] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.611308] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
    [ 0.641782] PCI: Using configuration type 1 for base access
    [ 0.642196] bio: create slab <bio-0> at 0
    [ 0.642292] ACPI: Added _OSI(Module Device)
    [ 0.642294] ACPI: Added _OSI(Processor Device)
    [ 0.642295] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.642297] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.643782] ACPI: EC: Look up EC in DSDT
    [ 0.646017] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.660446] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.685927] ACPI: SSDT 00000000bf6bb918 0043B (v01 PmRef Cpu0Ist 00003000 INTL 20060912)
    [ 0.686277] ACPI: Dynamic OEM Table Load:
    [ 0.686279] ACPI: SSDT (null) 0043B (v01 PmRef Cpu0Ist 00003000 INTL 20060912)
    [ 0.686397] ACPI: SSDT 00000000bf6b9018 008AA (v01 PmRef Cpu0Cst 00003001 INTL 20060912)
    [ 0.686733] ACPI: Dynamic OEM Table Load:
    [ 0.686735] ACPI: SSDT (null) 008AA (v01 PmRef Cpu0Cst 00003001 INTL 20060912)
    [ 0.707261] ACPI: SSDT 00000000bf6baa98 00303 (v01 PmRef ApIst 00003000 INTL 20060912)
    [ 0.707645] ACPI: Dynamic OEM Table Load:
    [ 0.707648] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20060912)
    [ 0.717152] ACPI: SSDT 00000000bf6b8d98 00119 (v01 PmRef ApCst 00003000 INTL 20060912)
    [ 0.717510] ACPI: Dynamic OEM Table Load:
    [ 0.717512] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20060912)
    [ 1.155007] ACPI: Interpreter enabled
    [ 1.155011] ACPI: (supports S0 S3 S4 S5)
    [ 1.155029] ACPI: Using IOAPIC for interrupt routing
    [ 1.156431] ACPI: Power Resource [APPR] (off)
    [ 1.167432] ACPI: Power Resource [LPP] (on)
    [ 1.169731] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
    [ 1.169896] ACPI: No dock devices found.
    [ 1.169897] HEST: Table not found.
    [ 1.169900] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 1.170526] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
    [ 1.171056] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
    [ 1.171058] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
    [ 1.171060] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
    [ 1.171063] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xdfffffff]
    [ 1.171064] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfedfffff]
    [ 1.171066] pci_root PNP0A08:00: host bridge window [mem 0xfee01000-0xffffffff]
    [ 1.171077] pci 0000:00:00.0: [8086:0044] type 0 class 0x000600
    [ 1.171094] DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
    [ 1.171109] pci 0000:00:01.0: [8086:0045] type 1 class 0x000604
    [ 1.171132] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [ 1.171134] pci 0000:00:01.0: PME# disabled
    [ 1.171179] pci 0000:00:16.0: [8086:3b64] type 0 class 0x000780
    [ 1.171208] pci 0000:00:16.0: reg 10: [mem 0xd7424000-0xd742400f 64bit]
    [ 1.171281] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [ 1.171285] pci 0000:00:16.0: PME# disabled
    [ 1.171311] pci 0000:00:16.3: [8086:3b67] type 0 class 0x000700
    [ 1.171333] pci 0000:00:16.3: reg 10: [io 0x6050-0x6057]
    [ 1.171344] pci 0000:00:16.3: reg 14: [mem 0xd742b000-0xd742bfff]
    [ 1.171454] pci 0000:00:19.0: [8086:10ea] type 0 class 0x000200
    [ 1.171478] pci 0000:00:19.0: reg 10: [mem 0xd7400000-0xd741ffff]
    [ 1.171489] pci 0000:00:19.0: reg 14: [mem 0xd742a000-0xd742afff]
    [ 1.171500] pci 0000:00:19.0: reg 18: [io 0x6020-0x603f]
    [ 1.171568] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
    [ 1.171572] pci 0000:00:19.0: PME# disabled
    [ 1.171601] pci 0000:00:1a.0: [8086:3b3c] type 0 class 0x000c03
    [ 1.171625] pci 0000:00:1a.0: reg 10: [mem 0xd7429000-0xd74293ff]
    [ 1.171714] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
    [ 1.171718] pci 0000:00:1a.0: PME# disabled
    [ 1.171748] pci 0000:00:1b.0: [8086:3b56] type 0 class 0x000403
    [ 1.171767] pci 0000:00:1b.0: reg 10: [mem 0xd7420000-0xd7423fff 64bit]
    [ 1.171840] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 1.171845] pci 0000:00:1b.0: PME# disabled
    [ 1.171870] pci 0000:00:1c.0: [8086:3b42] type 1 class 0x000604
    [ 1.171947] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 1.171952] pci 0000:00:1c.0: PME# disabled
    [ 1.171981] pci 0000:00:1c.1: [8086:3b44] type 1 class 0x000604
    [ 1.172056] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    [ 1.172061] pci 0000:00:1c.1: PME# disabled
    [ 1.172091] pci 0000:00:1c.3: [8086:3b48] type 1 class 0x000604
    [ 1.172167] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
    [ 1.172171] pci 0000:00:1c.3: PME# disabled
    [ 1.172209] pci 0000:00:1d.0: [8086:3b34] type 0 class 0x000c03
    [ 1.172233] pci 0000:00:1d.0: reg 10: [mem 0xd7428000-0xd74283ff]
    [ 1.172320] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 1.172324] pci 0000:00:1d.0: PME# disabled
    [ 1.172348] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
    [ 1.172421] pci 0000:00:1f.0: [8086:3b07] type 0 class 0x000601
    [ 1.172538] pci 0000:00:1f.2: [8086:3b2f] type 0 class 0x000106
    [ 1.172564] pci 0000:00:1f.2: reg 10: [io 0x6048-0x604f]
    [ 1.172575] pci 0000:00:1f.2: reg 14: [io 0x605c-0x605f]
    [ 1.172585] pci 0000:00:1f.2: reg 18: [io 0x6040-0x6047]
    [ 1.172596] pci 0000:00:1f.2: reg 1c: [io 0x6058-0x605b]
    [ 1.172606] pci 0000:00:1f.2: reg 20: [io 0x6000-0x601f]
    [ 1.172617] pci 0000:00:1f.2: reg 24: [mem 0xd7427000-0xd74277ff]
    [ 1.172663] pci 0000:00:1f.2: PME# supported from D3hot
    [ 1.172667] pci 0000:00:1f.2: PME# disabled
    [ 1.172700] pci 0000:00:1f.6: [8086:3b32] type 0 class 0x001180
    [ 1.172726] pci 0000:00:1f.6: reg 10: [mem 0xd7426000-0xd7426fff 64bit]
    [ 1.172841] pci 0000:01:00.0: [10de:0a6c] type 0 class 0x000300
    [ 1.172852] pci 0000:01:00.0: reg 10: [mem 0xd2000000-0xd2ffffff]
    [ 1.172865] pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
    [ 1.172878] pci 0000:01:00.0: reg 1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
    [ 1.172887] pci 0000:01:00.0: reg 24: [io 0x5000-0x507f]
    [ 1.172896] pci 0000:01:00.0: reg 30: [mem 0xfff80000-0xffffffff pref]
    [ 1.172951] pci 0000:01:00.1: [10de:0be3] type 0 class 0x000403
    [ 1.172963] pci 0000:01:00.1: reg 10: [mem 0xd3000000-0xd3003fff]
    [ 1.173053] pci 0000:00:01.0: PCI bridge to [bus 01-01]
    [ 1.173055] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff]
    [ 1.173057] pci 0000:00:01.0: bridge window [mem 0xd2000000-0xd30fffff]
    [ 1.173061] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
    [ 1.173114] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
    [ 1.173121] pci 0000:00:1c.0: bridge window [mem 0xd7300000-0xd73fffff]
    [ 1.173180] pci 0000:00:1c.1: PCI bridge to [bus 03-43]
    [ 1.173184] pci 0000:00:1c.1: bridge window [io 0x3000-0x4fff]
    [ 1.173188] pci 0000:00:1c.1: bridge window [mem 0xd3300000-0xd72fffff]
    [ 1.173312] pci 0000:44:00.0: [8086:4239] type 0 class 0x000280
    [ 1.173371] pci 0000:44:00.0: reg 10: [mem 0xd3200000-0xd3201fff 64bit]
    [ 1.173568] pci 0000:44:00.0: PME# supported from D0 D3hot D3cold
    [ 1.173595] pci 0000:44:00.0: PME# disabled
    [ 1.173667] pci 0000:00:1c.3: PCI bridge to [bus 44-44]
    [ 1.173674] pci 0000:00:1c.3: bridge window [mem 0xd3200000-0xd32fffff]
    [ 1.173727] pci 0000:45:06.0: [1180:0832] type 0 class 0x000c00
    [ 1.173741] pci 0000:45:06.0: proprietary Ricoh MMC controller disabled (via firewire function)
    [ 1.173742] pci 0000:45:06.0: MMC cards are now supported by standard SDHCI controller
    [ 1.173756] pci 0000:45:06.0: reg 10: [mem 0xd3101000-0xd31017ff]
    [ 1.173831] pci 0000:45:06.0: supports D1 D2
    [ 1.173832] pci 0000:45:06.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 1.173837] pci 0000:45:06.0: PME# disabled
    [ 1.173855] pci 0000:45:06.1: [1180:0822] type 0 class 0x000805
    [ 1.173875] pci 0000:45:06.1: reg 10: [mem 0xd3103000-0xd31030ff]
    [ 1.173949] pci 0000:45:06.1: supports D1 D2
    [ 1.173951] pci 0000:45:06.1: PME# supported from D0 D1 D2 D3hot D3cold
    [ 1.173955] pci 0000:45:06.1: PME# disabled
    [ 1.173973] pci 0000:45:06.2: [1180:0476] type 2 class 0x000607
    [ 1.173992] pci 0000:45:06.2: reg 10: [mem 0xd3100000-0xd3100fff]
    [ 1.174013] pci 0000:45:06.2: supports D1 D2
    [ 1.174015] pci 0000:45:06.2: PME# supported from D0 D1 D2 D3hot D3cold
    [ 1.174019] pci 0000:45:06.2: PME# disabled
    [ 1.174065] pci 0000:00:1e.0: PCI bridge to [bus 45-46] (subtractive decode)
    [ 1.174070] pci 0000:00:1e.0: bridge window [io 0x2000-0x2fff]
    [ 1.174074] pci 0000:00:1e.0: bridge window [mem 0xd3100000-0xd31fffff]
    [ 1.174082] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    [ 1.174084] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 1.174085] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 1.174087] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
    [ 1.174089] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfedfffff] (subtractive decode)
    [ 1.174091] pci 0000:00:1e.0: bridge window [mem 0xfee01000-0xffffffff] (subtractive decode)
    [ 1.174130] pci_bus 0000:46: [bus 46-49] partially hidden behind transparent bridge 0000:45 [bus 45-46]
    [ 1.174160] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 1.174327] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
    [ 1.174368] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
    [ 1.174408] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
    [ 1.174433] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
    [ 1.174476] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
    [ 1.174831] pci0000:00: Requesting ACPI _OSC control (0x1d)
    [ 1.175725] pci0000:00: ACPI _OSC control (0x1d) granted
    [ 1.180484] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus ff])
    [ 1.180539] pci 0000:ff:00.0: [8086:2c62] type 0 class 0x000600
    [ 1.180555] pci 0000:ff:00.1: [8086:2d01] type 0 class 0x000600
    [ 1.180572] pci 0000:ff:02.0: [8086:2d10] type 0 class 0x000600
    [ 1.180588] pci 0000:ff:02.1: [8086:2d11] type 0 class 0x000600
    [ 1.180602] pci 0000:ff:02.2: [8086:2d12] type 0 class 0x000600
    [ 1.180616] pci 0000:ff:02.3: [8086:2d13] type 0 class 0x000600
    [ 1.180642] pci0000:ff: Requesting ACPI _OSC control (0x1d)
    [ 1.180644] pci0000:ff: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
    [ 1.180645] ACPI _OSC control for PCIe not granted, disabling ASPM
    [ 1.180822] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
    [ 1.180858] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
    [ 1.180892] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
    [ 1.180925] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 11 12 14 15)
    [ 1.180961] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15)
    [ 1.180995] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
    [ 1.181031] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
    [ 1.181066] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
    [ 1.181158] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    [ 1.181163] vgaarb: loaded
    [ 1.181164] vgaarb: bridge control possible 0000:01:00.0
    [ 1.181225] PCI: Using ACPI for IRQ routing
    [ 1.191028] PCI: pci_cache_line_size set to 64 bytes
    [ 1.191111] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
    [ 1.191113] reserve RAM buffer: 00000000befc2000 - 00000000bfffffff
    [ 1.191115] reserve RAM buffer: 00000000bf800000 - 00000000bfffffff
    [ 1.191218] NetLabel: Initializing
    [ 1.191220] NetLabel: domain hash size = 128
    [ 1.191221] NetLabel: protocols = UNLABELED CIPSOv4
    [ 1.191232] NetLabel: unlabeled traffic allowed by default
    [ 1.191253] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [ 1.191258] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 1.193274] Switching to clocksource hpet
    [ 1.193423] Switched to NOHz mode on CPU #0
    [ 1.193521] Switched to NOHz mode on CPU #3
    [ 1.193528] Switched to NOHz mode on CPU #2
    [ 1.193577] Switched to NOHz mode on CPU #1
    [ 1.197862] pnp: PnP ACPI init
    [ 1.197878] ACPI: bus type pnp registered
    [ 1.198201] pnp 00:00: [bus 00-fe]
    [ 1.198204] pnp 00:00: [io 0x0000-0x0cf7 window]
    [ 1.198206] pnp 00:00: [io 0x0cf8-0x0cff]
    [ 1.198207] pnp 00:00: [io 0x0d00-0xffff window]
    [ 1.198209] pnp 00:00: [mem 0x000a0000-0x000bffff window]
    [ 1.198210] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
    [ 1.198212] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
    [ 1.198213] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
    [ 1.198215] pnp 00:00: [mem 0x000cc000-0x000cffff window]
    [ 1.198218] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
    [ 1.198220] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
    [ 1.198221] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
    [ 1.198223] pnp 00:00: [mem 0x000dc000-0x000dffff window]
    [ 1.198224] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
    [ 1.198226] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
    [ 1.198227] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
    [ 1.198229] pnp 00:00: [mem 0x000ec000-0x000effff window]
    [ 1.198230] pnp 00:00: [mem 0x000f0000-0x000fffff window]
    [ 1.198232] pnp 00:00: [mem 0xc0000000-0xdfffffff window]
    [ 1.198233] pnp 00:00: [mem 0xf0000000-0xfedfffff window]
    [ 1.198235] pnp 00:00: [mem 0xfee01000-0xffffffff window]
    [ 1.198323] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
    [ 1.198487] pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
    [ 1.198489] pnp 00:01: [mem 0xfed10000-0xfed13fff]
    [ 1.198490] pnp 00:01: [mem 0xfed1b000-0xfed1bfff]
    [ 1.198492] pnp 00:01: [mem 0xfed19000-0xfed19fff]
    [ 1.198493] pnp 00:01: [mem 0xd7500000-0xd7500fff]
    [ 1.198494] pnp 00:01: [mem 0xe0000000-0xefffffff]
    [ 1.198496] pnp 00:01: [mem 0xfed20000-0xfed3ffff]
    [ 1.198497] pnp 00:01: [mem 0xfed90000-0xfed93fff]
    [ 1.198498] pnp 00:01: [mem 0xfed45000-0xfed8ffff]
    [ 1.198500] pnp 00:01: [mem 0xfec00000-0xfec00fff]
    [ 1.198548] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 1.198550] system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved
    [ 1.198552] system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved
    [ 1.198554] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 1.198556] system 00:01: [mem 0xd7500000-0xd7500fff] has been reserved
    [ 1.198558] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
    [ 1.198560] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 1.198562] system 00:01: [mem 0xfed90000-0xfed93fff] has been reserved
    [ 1.198564] system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
    [ 1.198566] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
    [ 1.198568] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 1.198632] pnp 00:02: [io 0x0000-0x001f]
    [ 1.198633] pnp 00:02: [io 0x0081-0x0091]
    [ 1.198635] pnp 00:02: [io 0x0093-0x009f]
    [ 1.198636] pnp 00:02: [io 0x00c0-0x00df]
    [ 1.198638] pnp 00:02: [dma 4]
    [ 1.198662] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 1.198668] pnp 00:03: [mem 0xff000000-0xffffffff]
    [ 1.198693] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
    [ 1.198733] pnp 00:04: [io 0xfe00-0xfe0f]
    [ 1.198734] pnp 00:04: [io 0xfe80-0xfe8f]
    [ 1.198736] pnp 00:04: [mem 0xfed40000-0xfed44fff]
    [ 1.198765] pnp 00:04: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
    [ 1.198827] pnp 00:05: [mem 0xfed00000-0xfed003ff]
    [ 1.198853] pnp 00:05: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 1.198860] pnp 00:06: [io 0x00f0]
    [ 1.198870] pnp 00:06: [irq 13]
    [ 1.198894] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 1.198902] pnp 00:07: [io 0x002e-0x002f]
    [ 1.198903] pnp 00:07: [io 0x004e-0x004f]
    [ 1.198905] pnp 00:07: [io 0x0061]
    [ 1.198906] pnp 00:07: [io 0x0063]
    [ 1.198907] pnp 00:07: [io 0x0065]
    [ 1.198908] pnp 00:07: [io 0x0067]
    [ 1.198909] pnp 00:07: [io 0x0070]
    [ 1.198911] pnp 00:07: [io 0x0080]
    [ 1.198913] pnp 00:07: [io 0x0092]
    [ 1.198915] pnp 00:07: [io 0x00b2-0x00b3]
    [ 1.198916] pnp 00:07: [io 0x0200-0x027f]
    [ 1.198917] pnp 00:07: [io 0x1000-0x100f]
    [ 1.198919] pnp 00:07: [io 0xffff]
    [ 1.198920] pnp 00:07: [io 0xffff]
    [ 1.198921] pnp 00:07: [io 0x0400-0x047f]
    [ 1.198922] pnp 00:07: [io 0x0500-0x057f]
    [ 1.198924] pnp 00:07: [io 0xef80-0xef9f]
    [ 1.198968] system 00:07: [io 0x0200-0x027f] has been reserved
    [ 1.198970] system 00:07: [io 0x1000-0x100f] has been reserved
    [ 1.198972] system 00:07: [io 0xffff] has been reserved
    [ 1.198973] system 00:07: [io 0xffff] has been reserved
    [ 1.198975] system 00:07: [io 0x0400-0x047f] has been reserved
    [ 1.198977] system 00:07: [io 0x0500-0x057f] has been reserved
    [ 1.198979] system 00:07: [io 0xef80-0xef9f] has been reserved
    [ 1.198981] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 1.198988] pnp 00:08: [io 0x0070-0x0077]
    [ 1.198993] pnp 00:08: [irq 8]
    [ 1.199017] pnp 00:08: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 1.199341] pnp 00:09: [io 0x0378-0x037f]
    [ 1.199343] pnp 00:09: [io 0x0778-0x077a]
    [ 1.199348] pnp 00:09: [irq 5]
    [ 1.199350] pnp 00:09: [dma 0 disabled]
    [ 1.199427] pnp 00:09: Plug and Play ACPI device, IDs PNP0401 (active)
    [ 1.199434] pnp 00:0a: [io 0x0060]
    [ 1.199435] pnp 00:0a: [io 0x0064]
    [ 1.199440] pnp 00:0a: [irq 1]
    [ 1.199465] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 (active)
    [ 1.199475] pnp 00:0b: [irq 12]
    [ 1.199501] pnp 00:0b: Plug and Play ACPI device, IDs SYN0165 SYN0100 SYN0002 PNP0f13 (active)
    [ 1.199681] pnp 00:0c: [irq 23]
    [ 1.199714] pnp 00:0c: Plug and Play ACPI device, IDs HPQ0004 (active)
    [ 1.199820] pnp 00:0d: [bus ff]
    [ 1.199856] pnp 00:0d: Plug and Play ACPI device, IDs PNP0a03 (active)
    [ 1.199961] pnp: PnP ACPI: found 14 devices
    [ 1.199963] ACPI: ACPI bus type pnp unregistered
    [ 1.206678] pci 0000:01:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref]
    [ 1.206693] PCI: max bus depth: 2 pci_try_num: 3
    [ 1.206743] pci 0000:00:1e.0: BAR 15: assigned [mem 0xd8000000-0xdbffffff pref]
    [ 1.206746] pci 0000:00:1c.1: BAR 15: assigned [mem 0xd7600000-0xd77fffff 64bit pref]
    [ 1.206749] pci 0000:01:00.0: BAR 6: assigned [mem 0xd3080000-0xd30fffff pref]
    [ 1.206751] pci 0000:00:01.0: PCI bridge to [bus 01-01]
    [ 1.206753] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff]
    [ 1.206756] pci 0000:00:01.0: bridge window [mem 0xd2000000-0xd30fffff]
    [ 1.206758] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
    [ 1.206762] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
    [ 1.206768] pci 0000:00:1c.0: bridge window [mem 0xd7300000-0xd73fffff]
    [ 1.206777] pci 0000:00:1c.1: PCI bridge to [bus 03-43]
    [ 1.206780] pci 0000:00:1c.1: bridge window [io 0x3000-0x4fff]
    [ 1.206786] pci 0000:00:1c.1: bridge window [mem 0xd3300000-0xd72fffff]
    [ 1.206791] pci 0000:00:1c.1: bridge window [mem 0xd7600000-0xd77fffff 64bit pref]
    [ 1.206798] pci 0000:00:1c.3: PCI bridge to [bus 44-44]
    [ 1.206804] pci 0000:00:1c.3: bridge window [mem 0xd3200000-0xd32fffff]
    [ 1.206816] pci 0000:45:06.2: BAR 16: assigned [mem 0xdc000000-0xdfffffff]
    [ 1.206818] pci 0000:45:06.2: BAR 15: assigned [mem 0xd8000000-0xdbffffff pref]
    [ 1.206820] pci 0000:45:06.2: BAR 14: assigned [io 0x2000-0x20ff]
    [ 1.206822] pci 0000:45:06.2: BAR 13: assigned [io 0x2400-0x24ff]
    [ 1.206824] pci 0000:45:06.2: CardBus bridge to [bus 46-49]
    [ 1.206825] pci 0000:45:06.2: bridge window [io 0x2400-0x24ff]
    [ 1.206830] pci 0000:45:06.2: bridge window [io 0x2000-0x20ff]
    [ 1.206834] pci 0000:45:06.2: bridge window [mem 0xd8000000-0xdbffffff pref]
    [ 1.206839] pci 0000:45:06.2: bridge window [mem 0xdc000000-0xdfffffff]
    [ 1.206843] pci 0000:00:1e.0: PCI bridge to [bus 45-46]
    [ 1.206846] pci 0000:00:1e.0: bridge window [io 0x2000-0x2fff]
    [ 1.206852] pci 0000:00:1e.0: bridge window [mem 0xd3100000-0xd31fffff]
    [ 1.206857] pci 0000:00:1e.0: bridge window [mem 0xd8000000-0xdbffffff pref]
    [ 1.206871] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 1.206874] pci 0000:00:01.0: setting latency timer to 64
    [ 1.206883] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    [ 1.206888] pci 0000:00:1c.0: setting latency timer to 64
    [ 1.206895] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
    [ 1.206899] pci 0000:00:1c.1: setting latency timer to 64
    [ 1.206907] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
    [ 1.206912] pci 0000:00:1c.3: setting latency timer to 64
    [ 1.206920] pci 0000:00:1e.0: setting latency timer to 64
    [ 1.206929] pci 0000:45:06.2: PCI INT B -> GSI 22 (level, low) -> IRQ 22
    [ 1.206933] pci 0000:45:06.2: setting latency timer to 64
    [ 1.206937] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 1.206939] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 1.206940] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 1.206942] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xdfffffff]
    [ 1.206944] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfedfffff]
    [ 1.206945] pci_bus 0000:00: resource 9 [mem 0xfee01000-0xffffffff]
    [ 1.206947] pci_bus 0000:01: resource 0 [io 0x5000-0x5fff]
    [ 1.206948] pci_bus 0000:01: resource 1 [mem 0xd2000000-0xd30fffff]
    [ 1.206950] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
    [ 1.206952] pci_bus 0000:02: resource 1 [mem 0xd7300000-0xd73fffff]
    [ 1.206954] pci_bus 0000:03: resource 0 [io 0x3000-0x4fff]
    [ 1.206956] pci_bus 0000:03: resource 1 [mem 0xd3300000-0xd72fffff]
    [ 1.206957] pci_bus 0000:03: resource 2 [mem 0xd7600000-0xd77fffff 64bit pref]
    [ 1.206959] pci_bus 0000:44: resource 1 [mem 0xd3200000-0xd32fffff]
    [ 1.206961] pci_bus 0000:45: resource 0 [io 0x2000-0x2fff]
    [ 1.206962] pci_bus 0000:45: resource 1 [mem 0xd3100000-0xd31fffff]
    [ 1.206964] pci_bus 0000:45: resource 2 [mem 0xd8000000-0xdbffffff pref]
    [ 1.206966] pci_bus 0000:45: resource 4 [io 0x0000-0x0cf7]
    [ 1.206967] pci_bus 0000:45: resource 5 [io 0x0d00-0xffff]
    [ 1.206969] pci_bus 0000:45: resource 6 [mem 0x000a0000-0x000bffff]
    [ 1.206971] pci_bus 0000:45: resource 7 [mem 0xc0000000-0xdfffffff]
    [ 1.206972] pci_bus 0000:45: resource 8 [mem 0xf0000000-0xfedfffff]
    [ 1.206974] pci_bus 0000:45: resource 9 [mem 0xfee01000-0xffffffff]
    [ 1.206976] pci_bus 0000:46: resource 0 [io 0x2400-0x24ff]
    [ 1.206977] pci_bus 0000:46: resource 1 [io 0x2000-0x20ff]
    [ 1.206979] pci_bus 0000:46: resource 2 [mem 0xd8000000-0xdbffffff pref]
    [ 1.206980] pci_bus 0000:46: resource 3 [mem 0xdc000000-0xdfffffff]
    [ 1.207041] NET: Registered protocol family 2
    [ 1.207193] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
    [ 1.208004] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
    [ 1.210259] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 1.210529] TCP: Hash tables configured (established 524288 bind 65536)
    [ 1.210531] TCP reno registered
    [ 1.210541] UDP hash table entries: 2048 (order: 4, 65536 bytes)
    [ 1.210575] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
    [ 1.210741] NET: Registered protocol family 1
    [ 1.210853] pci 0000:01:00.0: Boot video device
    [ 1.210883] PCI: CLS 64 bytes, default 64
    [ 1.210926] Unpacking initramfs...
    [ 1.237784] Freeing initrd memory: 2384k freed
    [ 1.238199] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 1.238203] Placing 64MB software IO TLB between ffff8800bafbc000 - ffff8800befbc000
    [ 1.238205] software IO TLB at phys 0xbafbc000 - 0xbefbc000
    [ 1.238640] audit: initializing netlink socket (disabled)
    [ 1.238651] type=2000 audit(1323686434.066:1): initialized
    [ 1.247029] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 1.264476] VFS: Disk quotas dquot_6.5.2
    [ 1.264585] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 1.264725] msgmni has been set to 7624
    [ 1.264913] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    [ 1.264947] io scheduler noop registered
    [ 1.264949] io scheduler deadline registered
    [ 1.264987] io scheduler cfq registered (default)
    [ 1.265090] pcieport 0000:00:01.0: setting latency timer to 64
    [ 1.265113] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
    [ 1.265170] pcieport 0000:00:1c.0: setting latency timer to 64
    [ 1.265219] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
    [ 1.265296] pcieport 0000:00:1c.1: setting latency timer to 64
    [ 1.265344] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
    [ 1.265428] pcieport 0000:00:1c.3: setting latency timer to 64
    [ 1.265474] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
    [ 1.265558] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
    [ 1.265561] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
    [ 1.265563] pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
    [ 1.265565] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
    [ 1.265584] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
    [ 1.265589] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
    [ 1.265605] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
    [ 1.265610] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
    [ 1.265626] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
    [ 1.265628] pci 0000:44:00.0: Signaling PME through PCIe PME interrupt
    [ 1.265633] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
    [ 1.265699] intel_idle: MWAIT substates: 0x1120
    [ 1.265700] intel_idle: v0.4 model 0x25
    [ 1.265701] intel_idle: lapic_timer_reliable_states 0xffffffff
    [ 1.265768] ERST: Table is not found!
    [ 1.265769] GHES: HEST is not enabled!
    [ 1.265840] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 1.453354] serial 0000:00:16.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [ 1.473900] 0000:00:16.3: ttyS0 at I/O 0x6050 (irq = 17) is a 16550A
    [ 1.510096] Linux agpgart interface v0.103
    [ 1.510161] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    [ 1.511890] i8042: Detected active multiplexing controller, rev 1.1
    [ 1.512657] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 1.512669] serio: i8042 AUX0 port at 0x60,0x64 irq 12
    [ 1.512671] serio: i8042 AUX1 port at 0x60,0x64 irq 12
    [ 1.512672] serio: i8042 AUX2 port at 0x60,0x64 irq 12
    [ 1.512674] serio: i8042 AUX3 port at 0x60,0x64 irq 12
    [ 1.512749] mousedev: PS/2 mouse device common for all mice
    [ 1.512823] rtc_cmos 00:08: RTC can wake from S4
    [ 1.512935] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
    [ 1.512964] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
    [ 1.513041] cpuidle: using governor ladder
    [ 1.513163] cpuidle: using governor menu
    [ 1.513376] TCP cubic registered
    [ 1.513378] NET: Registered protocol family 17
    [ 1.513386] Registering the dns_resolver key type
    [ 1.513807] PM: Hibernation image not present or could not be loaded.
    [ 1.513811] registered taskstats version 1
    [ 1.522554] rtc_cmos 00:08: setting system clock to 2011-12-12 10:40:35 UTC (1323686435)
    [ 1.522600] Initializing network drop monitor service
    [ 1.523790] Freeing unused kernel memory: 712k freed
    [ 1.523892] Write protecting the kernel read-only data: 8192k
    [ 1.528829] Freeing unused kernel memory: 1968k freed
    [ 1.531057] Freeing unused kernel memory: 704k freed
    [ 1.542022] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 1.544068] udevd[47]: starting version 175
    [ 1.599208] usbcore: registered new interface driver usbfs
    [ 1.599233] usbcore: registered new interface driver hub
    [ 1.599416] usbcore: registered new device driver usb
    [ 1.600050] SCSI subsystem initialized
    [ 1.600539] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 1.600569] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 1.600604] ehci_hcd 0000:00:1a.0: setting latency timer to 64
    [ 1.600609] ehci_hcd 0000:00:1a.0: EHCI Host Controller
    [ 1.600660] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
    [ 1.600702] ehci_hcd 0000:00:1a.0: debug port 2
    [ 1.604618] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
    [ 1.604642] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xd7429000
    [ 1.612423] libata version 3.00 loaded.
    [ 1.616495] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
    [ 1.616708] hub 1-0:1.0: USB hub found
    [ 1.616718] hub 1-0:1.0: 3 ports detected
    [ 1.616798] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
    [ 1.616846] ehci_hcd 0000:00:1d.0: setting latency timer to 64
    [ 1.616850] ehci_hcd 0000:00:1d.0: EHCI Host Controller
    [ 1.616858] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
    [ 1.616892] ehci_hcd 0000:00:1d.0: debug port 2
    [ 1.620853] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
    [ 1.620870] ehci_hcd 0000:00:1d.0: irq 20, io mem 0xd7428000
    [ 1.633241] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    [ 1.633425] hub 2-0:1.0: USB hub found
    [ 1.633428] hub 2-0:1.0: 3 ports detected
    [ 1.633490] ahci 0000:00:1f.2: version 3.0
    [ 1.633505] ahci 0000:00:1f.2: PCI INT A -> GSI 21 (level, low) -> IRQ 21
    [ 1.633563] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
    [ 1.633604] ahci: SSS flag set, parallel bus scan disabled
    [ 1.646580] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x37 impl SATA mode
    [ 1.646586] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst
    [ 1.646593] ahci 0000:00:1f.2: setting latency timer to 64
    [ 1.674199] scsi0 : ahci
    [ 1.674387] scsi1 : ahci
    [ 1.674534] scsi2 : ahci
    [ 1.674684] scsi3 : ahci
    [ 1.674835] scsi4 : ahci
    [ 1.674985] scsi5 : ahci
    [ 1.675403] ata1: SATA max UDMA/133 abar m2048@0xd7427000 port 0xd7427100 irq 44
    [ 1.675410] ata2: SATA max UDMA/133 abar m2048@0xd7427000 port 0xd7427180 irq 44
    [ 1.675415] ata3: SATA max UDMA/133 abar m2048@0xd7427000 port 0xd7427200 irq 44
    [ 1.675419] ata4: DUMMY
    [ 1.675423] ata5: SATA max UDMA/133 abar m2048@0xd7427000 port 0xd7427300 irq 44
    [ 1.675428] ata6: SATA max UDMA/133 abar m2048@0xd7427000 port 0xd7427380 irq 44
    [ 1.923050] usb 1-1: new high speed USB device number 2 using ehci_hcd
    [ 1.993019] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 1.994452] ata1.00: unexpected _GTF length (8)
    [ 1.994830] ata1.00: ATA-8: ST9500420AS, 0006HPM1, max UDMA/100
    [ 1.994835] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 1.996687] ata1.00: unexpected _GTF length (8)
    [ 1.997082] ata1.00: configured for UDMA/100
    [ 1.997470] scsi 0:0:0:0: Direct-Access ATA ST9500420AS 0006 PQ: 0 ANSI: 5
    [ 2.047202] hub 1-1:1.0: USB hub found
    [ 2.047403] hub 1-1:1.0: 6 ports detected
    [ 2.152951] usb 2-1: new high speed USB device number 2 using ehci_hcd
    [ 2.239527] Refined TSC clocksource calibration: 2526.999 MHz.
    [ 2.239535] Switching to clocksource tsc
    [ 2.277235] hub 2-1:1.0: USB hub found
    [ 2.277408] hub 2-1:1.0: 8 ports detected
    [ 2.316165] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 2.334512] ata2.00: unexpected _GTF length (8)
    [ 2.334518] ata2.00: ATAPI: hp CDDVDW TS-L633N, 0300, max UDMA/100
    [ 2.355676] ata2.00: unexpected _GTF length (8)
    [ 2.355683] ata2.00: configured for UDMA/100
    [ 2.356266] usb 1-1.1: new full speed USB device number 3 using ehci_hcd
    [ 2.359674] scsi 1:0:0:0: CD-ROM hp CDDVDW TS-L633N 0300 PQ: 0 ANSI: 5
    [ 2.509545] usb 1-1.3: new full speed USB device number 4 using ehci_hcd
    [ 2.672631] ata3: SATA link down (SStatus 0 SControl 300)
    [ 2.672757] usb 1-1.5: new high speed USB device number 5 using ehci_hcd
    [ 2.875952] usb 2-1.1: new low speed USB device number 3 using ehci_hcd
    [ 2.992454] ata5: SATA link down (SStatus 0 SControl 300)
    [ 3.312277] ata6: SATA link down (SStatus 0 SControl 300)
    [ 3.316018] input: SIGMACHIP Usb Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input1
    [ 3.316114] generic-usb 0003:1C4F:0003.0001: input,hidraw0: USB HID v1.10 Mouse [SIGMACHIP Usb Mouse] on usb-0000:00:1d.0-1.1/input0
    [ 3.316135] usbcore: registered new interface driver usbhid
    [ 3.316137] usbhid: USB HID core driver
    [ 3.317866] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
    [ 3.317917] sd 0:0:0:0: [sda] Write Protect is off
    [ 3.317920] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 3.317948] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 3.381721] sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 >
    [ 3.382336] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 3.387890] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 3.387894] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 3.388140] sr 1:0:0:0: Attached scsi CD-ROM sr0
    [ 4.529129] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
    [ 6.120324] udevd[270]: starting version 175
    [ 6.255132] ACPI: acpi_idle yielding to intel_idle
    [ 6.278921] Bluetooth: Core ver 2.16
    [ 6.278933] NET: Registered protocol family 31
    [ 6.278934] Bluetooth: HCI device and connection manager initialized
    [ 6.278936] Bluetooth: HCI socket layer initialized
    [ 6.278937] Bluetooth: L2CAP socket layer initialized
    [ 6.278941] Bluetooth: SCO socket layer initialized
    [ 6.300296] vboxdrv: Found 4 processor cores.
    [ 6.300421] VBoxDrv: dbg - g_abExecMemory=ffffffffa01efbe0
    [ 6.300464] vboxdrv: fAsync=0 offMin=0x29e offMax=0x2215
    [ 6.300512] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
    [ 6.300513] vboxdrv: Successfully loaded version 4.1.6_OSE (interface 0x00190000).
    [ 6.488419] acpi device:04: registered as cooling_device4
    [ 6.489048] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:03/LNXVIDEO:00/input/input2
    [ 6.489055] ACPI: Video Device [DGFX] (multi-head: yes rom: no post: no)
    [ 6.493230] thermal LNXTHERM:00: registered as thermal_zone0
    [ 6.493233] ACPI: Thermal Zone [EXTZ] (56 C)
    [ 6.496212] thermal LNXTHERM:01: registered as thermal_zone1
    [ 6.496215] ACPI: Thermal Zone [EX2Z] (45 C)
    [ 6.497643] thermal LNXTHERM:02: registered as thermal_zone2
    [ 6.497646] ACPI: Thermal Zone [PWMZ] (21 C)
    [ 6.500635] thermal LNXTHERM:03: registered as thermal_zone3
    [ 6.500638] ACPI: Thermal Zone [LOCZ] (51 C)
    [ 6.501270] thermal LNXTHERM:04: registered as thermal_zone4
    [ 6.501273] ACPI: Thermal Zone [GFXZ] (0 C)
    [ 6.511776] ACPI: Battery Slot [BAT0] (battery present)
    [ 6.511827] ACPI: Battery Slot [BAT1] (battery absent)
    [ 6.512205] ACPI: AC Adapter [AC] (on-line)
    [ 6.512276] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
    [ 6.512282] ACPI: Sleep Button [SLPB]
    [ 6.512332] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4
    [ 6.512361] ACPI: Lid Switch [LID]
    [ 6.512400] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
    [ 6.512403] ACPI: Power Button [PWRF]
    [ 6.519354] wmi: Mapper loaded
    [ 6.520815] thermal LNXTHERM:05: registered as thermal_zone5
    [ 6.520818] ACPI: Thermal Zone [BATZ] (26 C)
    [ 6.530427] thermal LNXTHERM:06: registered as thermal_zone6
    [ 6.530431] ACPI: Thermal Zone [EGXZ] (59 C)
    [ 6.530717] thermal LNXTHERM:07: registered as thermal_zone7
    [ 6.530719] ACPI: Thermal Zone [CPUZ] (50 C)
    [ 6.530903] thermal LNXTHERM:08: registered as thermal_zone8
    [ 6.530905] ACPI: Thermal Zone [MCHZ] (56 C)
    [ 6.531093] thermal LNXTHERM:09: registered as thermal_zone9
    [ 6.531095] ACPI: Thermal Zone [PCHZ] (59 C)
    [ 6.546388] tpm_tis 00:04: 1.2 TPM (device-id 0xB, rev-id 16)
    [ 6.554082] sdhci: Secure Digital Host Controller Interface driver
    [ 6.554086] sdhci: Copyright(c) Pierre Ossman
    [ 6.555286] sdhci-pci 0000:45:06.1: SDHCI controller found [1180:0822] (rev 25)
    [ 6.555304] sdhci-pci 0000:45:06.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22
    [ 6.556337] sdhci-pci 0000:45:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
    [ 6.556344] sdhci-pci 0000:45:06.1: setting latency timer to 64
    [ 6.556366] _regulator_get: 0000:45:06.1 supply vmmc not found, using dummy regulator
    [ 6.557402] Registered led device: mmc0::
    [ 6.558446] mmc0: SDHCI controller on PCI [0000:45:06.1] using DMA
    [ 6.642646] input: PC Speaker as /devices/platform/pcspkr/input/input6
    [ 6.649218] iTCO_vendor_support: vendor-support=0
    [ 6.697973] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29)
    [ 6.697993] intel ips 0000:00:1f.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [ 6.699039] intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled
    [ 6.699239] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
    [ 6.702982] ppdev: user-space parallel port driver
    [ 6.718496] input: HP WMI hotkeys as /devices/virtual/input/input7
    [ 6.727366] parport_pc 00:09: reported by Plug and Play ACPI
    [ 6.727472] parport0: PC-style at 0x378 (0x778), irq 5, using FIFO [PCSPP,TRISTATE,COMPAT,ECP]
    [ 6.788688] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
    [ 6.788791] iTCO_wdt: Found a QM57 TCO device (Version=2, TCOBASE=0x0460)
    [ 6.788902] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 6.793684] yenta_cardbus 0000:45:06.2: CardBus bridge found [103c:172b]
    [ 6.818976] cfg80211: Calling CRDA to update world regulatory domain
    [ 6.924544] yenta_cardbus 0000:45:06.2: ISA IRQ mask 0x0c98, PCI irq 22
    [ 6.924548] yenta_cardbus 0000:45:06.2: Socket status: 30000818
    [ 6.924552] pci_bus 0000:45: Raising subordinate bus# of parent bus (#45) from #46 to #49
    [ 6.924559] yenta_cardbus 0000:45:06.2: pcmcia: parent PCI bridge window: [io 0x2000-0x2fff]
    [ 6.924562] yenta_cardbus 0000:45:06.2: pcmcia: parent PCI bridge window: [mem 0xd3100000-0xd31fffff]
    [ 6.924564] pcmcia_socket pcmcia_socket0: cs: memory probe 0xd3100000-0xd31fffff: excluding 0xd3100000-0xd310ffff
    [ 6.924573] yenta_cardbus 0000:45:06.2: pcmcia: parent PCI bridge window: [mem 0xd8000000-0xdbffffff pref]
    [ 6.924575] pcmcia_socket pcmcia_socket0: cs: memory probe 0xd8000000-0xdbffffff: excluding 0xd8000000-0xdbffffff
    [ 6.925821] firewire_ohci 0000:45:06.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
    [ 6.925828] firewire_ohci 0000:45:06.0: setting latency timer to 64
    [ 6.983612] firewire_ohci: Added fw-ohci device 0000:45:06.0, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x1
    [ 6.990475] mei: module is from the staging directory, the quality is unknown, you have been warned.
    [ 6.990759] mei 0000:00:16.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 6.990773] mei 0000:00:16.0: setting latency timer to 64
    [ 6.997179] hp_accel: laptop model unknown, using default axes configuration
    [ 7.031262] lis3lv02d: 8 bits sensor found
    [ 7.065278] e1000e: Intel(R) PRO/1000 Network Driver - 1.4.4-k
    [ 7.065281] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
    [ 7.065315] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
    [ 7.065326] e1000e 0000:00:19.0: setting latency timer to 64
    [ 7.065502] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
    [ 7.066848] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input8
    [ 7.067047] Registered led device: hp::hddprotect
    [ 7.067065] hp_accel: driver loaded
    [ 7.077969] Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
    [ 7.077971] Copyright(c) 2003-2011 Intel Corporation
    [ 7.078012] iwlagn 0000:44:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
    [ 7.078020] iwlagn 0000:44:00.0: setting latency timer to 64
    [ 7.078107] iwlagn 0000:44:00.0: pci_resource_len = 0x00002000
    [ 7.078110] iwlagn 0000:44:00.0: pci_resource_base = ffffc900110a8000
    [ 7.078114] iwlagn 0000:44:00.0: HW Revision ID = 0x35
    [ 7.078195] iwlagn 0000:44:00.0: irq 46 for MSI/MSI-X
    [ 7.078233] iwlagn 0000:44:00.0: Detected Intel(R) Centrino(R) Advanced-N 6200 AGN, REV=0x74
    [ 7.078293] iwlagn 0000:44:00.0: L1 Disabled; Enabling L0S
    [ 7.095212] iwlagn 0000:44:00.0: device EEPROM VER=0x436, CALIB=0x6
    [ 7.095216] iwlagn 0000:44:00.0: Device SKU: 0X1f0
    [ 7.095234] iwlagn 0000:44:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
    [ 7.231376] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) 70:5a:b6:9c:d9:12
    [ 7.231380] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
    [ 7.231426] e1000e 0000:00:19.0: eth0: MAC: 9, PHY: 10, PBA No: 2052FF-0FF
    [ 7.241803] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D0
    [ 7.241815] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D0
    [ 7.241829] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 7.241956] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
    [ 7.241987] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
    [ 7.381485] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input9
    [ 7.421464] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input10
    [ 7.436929] input: HDA Intel Line In at Sep Rear Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
    [ 7.437020] input: HDA Intel Mic at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
    [ 7.437074] input: HDA Intel HP Out at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
    [ 7.437127] input: HDA Intel HP Out at Sep Rear Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
    [ 7.437354] snd_hda_intel 0000:01:00.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 7.437357] hda_intel: Disabling MSI
    [ 7.437418] snd_hda_intel 0000:01:00.1: setting latency timer to 64
    [ 7.468280] nvidia: module license 'NVIDIA' taints kernel.
    [ 7.468284] Disabling lock debugging due to kernel taint
    [ 7.483375] firewire_core: created device fw0: GUID 5566778811223344, S400
    [ 7.513131] iwlagn 0000:44:00.0: loaded firmware version 9.221.4.1 build 25532
    [ 7.513376] Registered led device: phy0-led
    [ 7.528617] Bluetooth: Generic Bluetooth USB driver ver 0.6
    [ 7.615404] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
    [ 7.688700] padlock_aes: VIA PadLock not detected.
    [ 7.704789] usbcore: registered new interface driver btusb
    [ 7.809724] pcmcia_socket pcmcia_socket0: pccard: PCMCIA card inserted into slot 0
    [ 7.809737] pcmcia_socket pcmcia_socket0: cs: memory probe 0xd3110000-0xd31fffff: excluding 0xd31fe000-0xd320bfff
    [ 7.818215] pcmcia 0.0: pcmcia: registering new device pcmcia0.0 (IRQ: 22)
    [ 7.818599] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xfffff
    [ 7.818672] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: excluding 0xa0000000-0xa0ffffff
    [ 7.818712] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff
    [ 7.829822] Linux media interface: v0.10
    [ 7.874357] scsi6 : pata_pcmcia
    [ 7.874447] ata7: PATA max PIO0 cmd 0x2100 ctl 0x210e irq 22
    [ 7.924848] Linux video capture interface: v2.00
    [ 8.119588] HDMI status: Codec=0 Pin=5 Presence_Detect=0 ELD_Valid=0
    [ 8.129386] uvcvideo: Found UVC 1.00 device HP Webcam [2 MP Macro] (04f2:b15e)
    [ 8.167213] input: HP Webcam [2 MP Macro] as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input15
    [ 8.167403] usbcore: registered new interface driver uvcvideo
    [ 8.167407] USB Video Class driver (1.1.1)
    [ 8.173608] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000
    [ 8.206197] HDMI status: Codec=1 Pin=5 Presence_Detect=0 ELD_Valid=0
    [ 8.216862] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input16
    [ 8.296149] HDMI status: Codec=2 Pin=5 Presence_Detect=0 ELD_Valid=0
    [ 8.382758] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
    [ 9.425949] input: HDA NVidia HDMI/DP as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17
    [ 9.426044] input: HDA NVidia HDMI/DP as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input18
    [ 9.426158] input: HDA NVidia HDMI/DP as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input19
    [ 9.426237] input: HDA NVidia HDMI/DP as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input20
    [ 9.426609] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 9.426618] nvidia 0000:01:00.0: setting latency timer to 64
    [ 9.426624] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
    [ 9.426777] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 290.10 Wed Nov 16 17:39:29 PST 2011
    [ 10.662089] EXT4-fs (sda7): re-mounted. Opts: (null)
    [ 10.902053] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
    [ 10.969898] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null)
    [ 11.014158] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
    [ 11.121788] Adding 2928636k swap on /dev/sda6. Priority:-1 extents:1 across:2928636k
    [ 12.670950] NET: Registered protocol family 10
    [ 14.106472] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
    [ 14.159688] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
    [ 14.160148] ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ 14.200761] iwlagn 0000:44:00.0: L1 Disabled; Enabling L0S
    [ 14.207369] iwlagn 0000:44:00.0: Radio type=0x1-0x3-0x1
    [ 14.441087] iwlagn 0000:44:00.0: L1 Disabled; Enabling L0S
    [ 14.447672] iwlagn 0000:44:00.0: Radio type=0x1-0x3-0x1
    [ 14.544705] ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 16.289430] e1000e 0000:00:19.0: PCI INT A disabled
    [ 16.289443] e1000e 0000:00:19.0: PME# enabled
    [ 22.651552] wlan0: authenticate with 00:25:9c:93:96:8d (try 1)
    [ 22.653433] wlan0: authenticated
    [ 22.705748] wlan0: associate with 00:25:9c:93:96:8d (try 1)
    [ 22.722077] wlan0: RX AssocResp from 00:25:9c:93:96:8d (capab=0x531 status=0 aid=1)
    [ 22.722084] wlan0: associated
    [ 22.727389] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
    [ 32.055575] fuse init (API version 7.17)
    [ 33.475517] wlan0: no IPv6 routers present
    [ 38.744042] EXT4-fs (sda7): re-mounted. Opts: commit=0
    [ 38.893007] EXT4-fs (sda5): re-mounted. Opts: commit=0
    [ 39.020099] EXT4-fs (sda9): re-mounted. Opts: commit=0
    [ 39.621923] EXT4-fs (sda8): re-mounted. Opts: commit=0
    [ 160.550726] iwlagn 0000:44:00.0: Tx aggregation enabled on ra = 00:25:9c:93:96:8d tid = 0
    As for my boot line:
    # Config file for GRUB - The GNU GRand Unified Bootloader
    # /boot/grub/menu.lst
    # DEVICE NAME CONVERSIONS
    # Linux Grub
    # /dev/fd0 (fd0)
    # /dev/sda (hd0)
    # /dev/sdb2 (hd1,1)
    # /dev/sda3 (hd0,2)
    # FRAMEBUFFER RESOLUTION SETTINGS
    # +-------------------------------------------------+
    # | 640x480 800x600 1024x768 1280x1024
    # ----+--------------------------------------------
    # 256 | 0x301=769 0x303=771 0x305=773 0x307=775
    # 32K | 0x310=784 0x313=787 0x316=790 0x319=793
    # 64K | 0x311=785 0x314=788 0x317=791 0x31A=794
    # 16M | 0x312=786 0x315=789 0x318=792 0x31B=795
    # +-------------------------------------------------+
    # for more details and different resolutions see
    # https://wiki.archlinux.org/index.php/GRUB#Framebuffer_resolution
    # general configuration:
    timeout 5
    default 0
    color light-blue/black light-cyan/blue
    # boot sections follow
    # each is implicitly numbered from 0 in the order of appearance below
    # TIP: If you want a 1024x768 framebuffer, add "vga=773" to your kernel line.
    # (0) Arch Linux
    title Arch Linux
    root (hd0,4)
    kernel /vmlinuz-linux root=/dev/sda7 ro
    initrd /initramfs-linux.img
    # (1) Arch Linux
    title Arch Linux Fallback
    root (hd0,4)
    kernel /vmlinuz-linux root=/dev/sda7 ro
    initrd /initramfs-linux-fallback.img
    # (2) Windows
    title Windows
    rootnoverify (hd0,0)
    makeactive
    chainloader +1

  • My Mac book air screen keeps going blank

    Recently my Mac book started giving me a blank screen when I turn it on. The desktop will occasionally flash on but as soon as I hit the mousepad it goes blank again. Any ideas?

    Hi ...
    Try here >  Troubleshooting: My computer won't turn on

  • 30" DP monitor keeps going blank for a few seconds.

    I have 2x 30" montiros:
    1. dell U3011 Display port 
    2. dell 3007WFP with active Dual link DVI to displayport.
    Both cost in the region of £1300.
    Neither will work with the think pad W530 + 2000KM, but both work flawlessly with macbooks and any dell with DP.
    Only the thinkpad doesnt work.
    The symptoms are this:
    1. U3011: goes blank (black) for 2s every 30s.
    2. 3007WFP Blank for 30s, flashes the desktop for 2s, then goes  blank again.
    Clearly there is a serious issue with the thinkpads displayport or drivers.
    Both monitors work perfectly if I unplug the minidsplayport from my thinkpad, and plug it into any other laptop with mini-displayport (have tried 2macs and 2 dells - all 4 no issues).
    If I plug the monitors into the mini-doc3, they work fine, no flashing.  If I plug either into the mini-displayport on the lalptop itself, then they flash.
    The problem is I only have one docking station, and have one 30" at work, and one 30" at home.  
    I desperately need a solution so I can work at home.
    Both monitors showup with the correct name and resolution in the windows 8 "screen resolution" page in the control panel.
    I have also tried swapping out my displayport to mini-displayport converter.  Neither make any difference, and both work perfectly with any other laptop and my monitors.
    The Nvidia control panel version is 7.5.800.  If I do "check for updates" it says "no updates available"
    There is a simlar problem witht he audio through the monitor.  If I connect directly to the mini-displayport on the laptop, the sound dissapears for no reason for around 20s every 60s.  IF I plug it into the DP on the doc, sound never drops.  
    Any ideas?

    Are you using "Optimus mode" set in BIOS?  Or are you using "discrete graphics" set in BIOS (which will also allow you to install the latest retail nVidia driver to support the K2000M)?  Try "discrete graphics", install the latest nVidia driver (not from the Lenovo site for Optimus, but from the nVidia site for the K2000M), and see what happens.
    Are you using a short miniDP adapter and also a regular cable?  Have you tried a simple straight-through single cable with the proper miniDP connector at one end (for the W530) and the proper other end as required by your monitor?  I suggest going with the single cable, and avoiding any adapter.

  • My computer screen keeps going blank and then going back to the box where I put my password in to start my comp. Why is this happening?

    My computer (Macbook) was working fine this am. I left it for an hour and then came back and the screen was black (always does that as the screensaver hardly ever works). I moved the mouse to wake it up and everything was normal. I went to adjust the volume and the screen went blank and the main page with the box where I put my password in when I first start my comp appeared. I put my password in and everything was normal again. I opened a window in Safari and before it loaded completely the same thing happened, the screen went blank and went back to the password box. Does anyone know why this is happening? I don't have an external hard drive or any blank flash drives so I can't back anything up right now and am afraid I'm going to lose everything. Thank you

    Sounds like hardware failure, called boot loop. Call Apple and or go on apple.com and make Genius Bar appointment to have your iphone reviewed by a Tech. Provided you iphone shows no physical or liquid damage they will take care of you, or if you have Apple Care Plus
    Genius Bar Rerservation :  http://www.apple.com/retail/geniusbar/

  • The light in my iBook keeps going out

    Hi
    Everytime I pick my ibook up the light goes out. I can kinda still see that the screen is still on, its like the main light just goes out and i have to cut it off and cut it back on. It just started happening frequently this past week. Anybody know whats wrong or what i could do to fix it?

    It depends on which model iBook you have, and you haven't given us that information.
    First identify which model iBook it is from this Apple Knowledge Base article:
    http://docs.info.apple.com/article.html?artnum=88039
    Then go down the list and find the procedure for your particular iBook.
    Good luck.

  • IMac keep going blank

    Hello. About two days ago my G5 iMac went blank. Then about ten minutes later it came back on. I then begun to use it again then about twenty min later, blank again. SO I restarted the computer and it came on blank. I could hear the fan running this is how I knew that it was on. Then about ten-twenty min later the screen showed up. I looked closely at the screen and I could see a little light while it was blank but no screen.
    The funny thing about this is that I had Apple care but it just expired last month. What kind of trickery is that? Anyways if anyone has any suggestions to what may be going on, I really would appreciate it. Thanks

    Jaleroca,
    It costs nothing to make an appointment at your closest Apple Store with the Genius Bar. They'll look your iMac over and tell you what they think is wrong and what they might be able to do about it. This is one of the best reasons to own a Mac, so take advantage of it. Living in or near a major city means you shouldn't have to travel far to take advantage of the Genius Bar.
    Jerry

  • Firefox dev tools inspector window keeps going blank

    every few times i switch to FF to debug, the inspector window is totally blank. if i click the inspector tool and highlight html, it will appear to be scrolling over in the inspector window to highlight the code, but the page is totally blank. close/reopen tools fixes, but a few times later its broken again. has been going on for months and months, at least since v32. Using FirefoxDeveloperEdition.

    Does this also happen if you use a release version instead of the beta?
    Create a new profile as a test to check if your current profile is causing the problem.
    See "Creating a profile":
    *https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
    *http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
    If the new profile works then you can transfer files from a previously used profile to the new profile, but be cautious not to copy corrupted files to avoid carrying over problems.
    *http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

  • My password manager will not remain active. It keeps going blank?

    After the latest update, 35.0.1, Firefox dumped all my passwords and will not remain active in keeping passwords. I must keep checking the "Remember passwords for sites" box every time I use Firefox and enter a website. I will download version 36.0 now that it has just notified me.

    Hi steve579,
    After downloading the update are you still seeing issues with the password manager?
    Also please check to make sure that this does not happen in safe mode. [[Troubleshoot Firefox issues using Safe Mode]]

  • IPad 4 (Wifi): Blank Screen, doesn't Turn On

    Hello,
    I can't seem turn on my iPad. I have tried a restart, and nothing. I made sure it was charged, and forced it into DFW mode. iTunes recognizes it, downloads the software, and then nothing. I checked the logs and this is what's there: (Sorry its long);
    2015-03-29 17:31:09.000 iTunes[448:130f]: restore library built Dec 17 2014 at 16:38:59
    2015-03-29 17:31:09.000 iTunes[448:130f]: iTunes: iTunes 12.1.0.50
    2015-03-29 17:31:09.000 iTunes[448:130f]: iTunes: Software payload version: 12D508
    2015-03-29 17:31:09.000 iTunes[448:130f]: iTunes: Using MobileRestore state machine
    [17:31:14.0357] Successfully applied power assertion
    [17:31:14.0366] Changing state from '(null)' to 'Restoring'
    [17:31:14.0376] device software does not support nonce generation
    [17:31:14.0384] requested restore behavior: Erase
    [17:31:14.0393] amai: AMAuthInstallSsoInitialize: can't find SSOClient.framework
    [17:31:14.0403] requested restore behavior: Erase
    [17:31:14.0411] requested variant: Erase
    [17:31:14.0419] requested restore behavior: Erase
    [17:31:14.5653] amai: _AMAuthInstallBundleCreateServerRequestDictionary: withApTicket is False
    [17:31:14.5669] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreLogo"
    [17:31:14.5683] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreDeviceTree"
    [17:31:14.5697] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreKernelCache"
    [17:31:14.5709] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreRamDisk"
    [17:31:14.5721] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "iBEC"
    [17:31:14.5731] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "iBSS" Digest = "<CFData 0x6000000b9b60 [0x7fff75618cf0]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [17:31:14.5743] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "KernelCache"
    [17:31:14.5753] amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "ftap" not part of manifest, skipping
    [17:31:14.5763] amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "rfta" not part of manifest, skipping
    [17:31:14.5772] amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "ftsp" not part of manifest, skipping
    [17:31:14.5781] amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "rfts" not part of manifest, skipping
    [17:31:14.5789] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryLow0"
    [17:31:14.5799] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "iBoot"
    [17:31:14.5808] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryLow1"
    [17:31:14.5817] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryPlugin"
    [17:31:14.5826] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryFull"
    [17:31:14.5834] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging0"
    [17:31:14.5849] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RecoveryMode"
    [17:31:14.5867] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "DeviceTree"
    [17:31:14.5883] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "AppleLogo"
    [17:31:14.5896] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "LLB" Digest = "<CFData 0x6100000bf860 [0x7fff75618cf0]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [17:31:14.5912] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging1"
    [17:31:14.5924] amai: _AMAuthInstallBundleCreateServerRequestDictionary: using UniqueBuildID <CFData 0x60000044cde0 [0x7fff75618cf0]>{length = 20, capacity = 20, bytes = 0x1491d7b0be439d3c7eefa34a193579b9431dd118}
    [17:31:14.5929] amai: AMAuthInstallRequestSendSync: SSO function returned NULL and no SSO token was provided, SSO disabled.
    [17:31:14.6945] amai: AMAuthInstallRequestSendSync: received tss response (server version: 2.1.0)
    [17:31:14.6971] amai: _AMAuthInstallBundlePopulatePersonalizedBundle: no entry in manifest found for "ftap"
    [17:31:14.6987] amai: _AMAuthInstallBundlePopulatePersonalizedBundle: no entry in manifest found for "rfta"
    [17:31:14.7001] amai: _AMAuthInstallBundlePopulatePersonalizedBundle: no entry in manifest found for "ftsp"
    [17:31:14.7014] amai: _AMAuthInstallBundlePopulatePersonalizedBundle: no entry in manifest found for "rfts"
    [17:31:14.7028] amai: _AMAuthInstallBundlePopulatePersonalizedBundle: no entry in manifest found for "Diags"
    [17:31:14.7040] <DFU Device 0x60000013bbc0>: production fused device
    [17:31:14.7049] requested restore behavior: Erase
    [17:31:14.7059] device software does not support nonce generation
    [17:31:14.7186] Issued GETSTATE request: state = 0x2
    [17:31:14.7196] <DFU Device 0x60000013bbc0>: operation 2 progress 0
    [17:31:14.7204] Issuing DNLOAD request
    [17:31:14.7290] Issued GETSTATUS request: state = 5 status = 0
    [17:31:14.7308] <DFU Device 0x60000013bbc0>: operation 2 progress 2
    [17:31:14.7324] Issuing DNLOAD request
    [17:31:14.7391] Issued GETSTATUS request: state = 5 status = 0
    [17:31:14.7401] <DFU Device 0x60000013bbc0>: operation 2 progress 5
    [17:31:14.7411] Issuing DNLOAD request
    [17:31:14.7489] Issued GETSTATUS request: state = 5 status = 0
    [17:31:14.7500] <DFU Device 0x60000013bbc0>: operation 2 progress 7
    [17:31:14.7508] Issuing DNLOAD request
    [17:31:14.7591] Issued GETSTATUS request: state = 5 status = 0
    [17:31:14.7609] <DFU Device 0x60000013bbc0>: operation 2 progress 10
    [17:31:14.7625] Issuing DNLOAD request
    [17:31:14.7697] Issued GETSTATUS request: state = 5 status = 0
    [17:31:14.7714] <DFU Device 0x60000013bbc0>: operation 2 progress 12
    [17:31:14.7731] Issuing DNLOAD request
    [17:31:14.7801] Issued GETSTATUS request: state = 5 status = 0
    [17:31:14.7819] <DFU Device 0x60000013bbc0>: operation 2 progress 15
    [17:31:14.7835] Issuing DNLOAD request
    [17:31:14.7907] Issued GETSTATUS request: state = 5 status = 0
    [17:31:14.7924] <DFU Device 0x60000013bbc0>: operation 2 progress 17
    [17:31:14.7941] Issuing DNLOAD request
    [17:31:14.8012] Issued GETSTATUS request: state = 5 status = 0
    [17:31:14.8030] <DFU Device 0x60000013bbc0>: operation 2 progress 20
    [17:31:14.8046] Issuing DNLOAD request
    [17:31:14.8117] Issued GETSTATUS request: state = 5 status = 0
    [17:31:14.8135] <DFU Device 0x60000013bbc0>: operation 2 progress 22
    [17:31:14.8151] Issuing DNLOAD request
    [17:31:14.8223] Issued GETSTATUS request: state = 5 status = 0
    [17:31:14.8240] <DFU Device 0x60000013bbc0>: operation 2 progress 25
    [17:31:14.8257] Issuing DNLOAD request
    [17:31:14.8326] Issued GETSTATUS request: state = 5 status = 0
    [17:31:14.8343] <DFU Device 0x60000013bbc0>: operation 2 progress 28
    [17:31:14.8360] Issuing DNLOAD request
    [17:31:14.8431] Issued GETSTATUS request: state = 5 status = 0
    [17:31:14.8448] <DFU Device 0x60000013bbc0>: operation 2 progress 30
    [17:31:14.8465] Issuing DNLOAD request
    [17:31:14.8535] Issued GETSTATUS request: state = 5 status = 0
    [17:31:14.8552] <DFU Device 0x60000013bbc0>: operation 2 progress 33
    [17:31:14.8569] Issuing DNLOAD request
    [17:31:14.8641] Issued GETSTATUS request: state = 5 status = 0
    [17:31:14.8658] <DFU Device 0x60000013bbc0>: operation 2 progress 35
    [17:31:14.8675] Issuing DNLOAD request
    [17:31:14.8745] Issued GETSTATUS request: state = 5 status = 0
    [17:31:14.8762] <DFU Device 0x60000013bbc0>: operation 2 progress 38
    [17:31:14.8779] Issuing DNLOAD request
    [17:31:14.8850] Issued GETSTATUS request: state = 5 status = 0
    [17:31:14.8867] <DFU Device 0x60000013bbc0>: operation 2 progress 40
    [17:31:14.8884] Issuing DNLOAD request
    [17:31:14.8954] Issued GETSTATUS request: state = 5 status = 0
    [17:31:14.8972] <DFU Device 0x60000013bbc0>: operation 2 progress 43
    [17:31:14.8988] Issuing DNLOAD request
    [17:31:14.9058] Issued GETSTATUS request: state = 5 status = 0
    [17:31:14.9075] <DFU Device 0x60000013bbc0>: operation 2 progress 45
    [17:31:14.9092] Issuing DNLOAD request
    [17:31:14.9163] Issued GETSTATUS request: state = 5 status = 0
    [17:31:14.9180] <DFU Device 0x60000013bbc0>: operation 2 progress 48
    [17:31:14.9197] Issuing DNLOAD request
    [17:31:14.9268] Issued GETSTATUS request: state = 5 status = 0
    [17:31:14.9286] <DFU Device 0x60000013bbc0>: operation 2 progress 50
    [17:31:14.9302] Issuing DNLOAD request
    [17:31:14.9373] Issued GETSTATUS request: state = 5 status = 0
    [17:31:14.9390] <DFU Device 0x60000013bbc0>: operation 2 progress 53
    [17:31:14.9407] Issuing DNLOAD request
    [17:31:14.9477] Issued GETSTATUS request: state = 5 status = 0
    [17:31:14.9494] <DFU Device 0x60000013bbc0>: operation 2 progress 56
    [17:31:14.9511] Issuing DNLOAD request
    [17:31:14.9582] Issued GETSTATUS request: state = 5 status = 0
    [17:31:14.9600] <DFU Device 0x60000013bbc0>: operation 2 progress 58
    [17:31:14.9616] Issuing DNLOAD request
    [17:31:14.9687] Issued GETSTATUS request: state = 5 status = 0
    [17:31:14.9705] <DFU Device 0x60000013bbc0>: operation 2 progress 61
    [17:31:14.9721] Issuing DNLOAD request
    [17:31:14.9792] Issued GETSTATUS request: state = 5 status = 0
    [17:31:14.9809] <DFU Device 0x60000013bbc0>: operation 2 progress 63
    [17:31:14.9826] Issuing DNLOAD request
    [17:31:14.9897] Issued GETSTATUS request: state = 5 status = 0
    [17:31:14.9914] <DFU Device 0x60000013bbc0>: operation 2 progress 66
    [17:31:14.9931] Issuing DNLOAD request
    [17:31:15.0002] Issued GETSTATUS request: state = 5 status = 0
    [17:31:15.0020] <DFU Device 0x60000013bbc0>: operation 2 progress 68
    [17:31:15.0037] Issuing DNLOAD request
    [17:31:15.0105] Issued GETSTATUS request: state = 5 status = 0
    [17:31:15.0124] <DFU Device 0x60000013bbc0>: operation 2 progress 71
    [17:31:15.0137] Issuing DNLOAD request
    [17:31:15.0211] Issued GETSTATUS request: state = 5 status = 0
    [17:31:15.0228] <DFU Device 0x60000013bbc0>: operation 2 progress 73
    [17:31:15.0245] Issuing DNLOAD request
    [17:31:15.0315] Issued GETSTATUS request: state = 5 status = 0
    [17:31:15.0334] <DFU Device 0x60000013bbc0>: operation 2 progress 76
    [17:31:15.0350] Issuing DNLOAD request
    [17:31:15.0419] Issued GETSTATUS request: state = 5 status = 0
    [17:31:15.0436] <DFU Device 0x60000013bbc0>: operation 2 progress 78
    [17:31:15.0453] Issuing DNLOAD request
    [17:31:15.0524] Issued GETSTATUS request: state = 5 status = 0
    [17:31:15.0541] <DFU Device 0x60000013bbc0>: operation 2 progress 81
    [17:31:15.0558] Issuing DNLOAD request
    [17:31:15.0629] Issued GETSTATUS request: state = 5 status = 0
    [17:31:15.0646] <DFU Device 0x60000013bbc0>: operation 2 progress 84
    [17:31:15.0663] Issuing DNLOAD request
    [17:31:15.0733] Issued GETSTATUS request: state = 5 status = 0
    [17:31:15.0750] <DFU Device 0x60000013bbc0>: operation 2 progress 86
    [17:31:15.0764] Issuing DNLOAD request
    [17:31:15.0838] Issued GETSTATUS request: state = 5 status = 0
    [17:31:15.0856] <DFU Device 0x60000013bbc0>: operation 2 progress 89
    [17:31:15.0872] Issuing DNLOAD request
    [17:31:15.0943] Issued GETSTATUS request: state = 5 status = 0
    [17:31:15.0961] <DFU Device 0x60000013bbc0>: operation 2 progress 91
    [17:31:15.0977] Issuing DNLOAD request
    [17:31:15.1048] Issued GETSTATUS request: state = 5 status = 0
    [17:31:15.1065] <DFU Device 0x60000013bbc0>: operation 2 progress 94
    [17:31:15.1082] Issuing DNLOAD request
    [17:31:15.1152] Issued GETSTATUS request: state = 5 status = 0
    [17:31:15.1170] <DFU Device 0x60000013bbc0>: operation 2 progress 96
    [17:31:15.1185] Issuing DNLOAD request
    [17:31:15.1255] Issued GETSTATUS request: state = 5 status = 0
    [17:31:15.1268] <DFU Device 0x60000013bbc0>: operation 2 progress 99
    [17:31:15.1280] Issuing DNLOAD request
    [17:31:15.1304] Issued GETSTATUS request: state = 5 status = 0
    [17:31:15.1319] Issuing DNLOAD request
    [17:31:15.1329] Issued GETSTATUS request: state = 6 status = 0
    [17:31:15.1866] Issued GETSTATUS request: state = 7 status = 0
    [17:31:15.1885] <DFU Device 0x60000013bbc0>: DFU succeeded
    [17:31:15.1901] Finished DFU Restore Phase: Successful
    [17:31:15.2910] DFU mode device disconnected
    [17:31:15.2925] Device removed when in state Restoring, moving device to transition state
    [17:31:15.2938] Changing state from 'Restoring' to 'Transitioning'
    [17:31:15.2950] Creating timer to monitor transition
    [17:33:44.7231] DFU mode device connected
    [17:33:44.7239] Transitioning device returned, continuing restore.
    [17:33:44.7248] Canceling timer
    [17:33:44.7256] Changing state from 'Transitioning' to 'Restoring'
    [17:33:44.7264] device software does not support nonce generation
    [17:33:44.7272] requested restore behavior: Erase
    [17:33:44.7280] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
    [17:33:44.7290] requested restore behavior: Erase
    [17:33:44.7298] requested variant: Erase
    [17:33:44.7306] requested restore behavior: Erase
    [17:33:45.1753] amai: _AMAuthInstallBundleCreateServerRequestDictionary: withApTicket is False
    [17:33:45.1768] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreLogo"
    [17:33:45.1780] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreDeviceTree"
    [17:33:45.1789] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreKernelCache"
    [17:33:45.1799] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreRamDisk"
    [17:33:45.1808] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "iBEC"
    [17:33:45.1817] amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "iBSS" has been previously personalized; skipping it
    [17:33:45.1826] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "KernelCache"
    [17:33:45.1835] amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "ftap" not part of manifest, skipping
    [17:33:45.1844] amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "rfta" not part of manifest, skipping
    [17:33:45.1852] amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "ftsp" not part of manifest, skipping
    [17:33:45.1861] amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "rfts" not part of manifest, skipping
    [17:33:45.1870] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryLow0"
    [17:33:45.1879] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "iBoot"
    [17:33:45.1888] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryLow1"
    [17:33:45.1897] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryPlugin"
    [17:33:45.1905] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryFull"
    [17:33:45.1915] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging0"
    [17:33:45.1925] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RecoveryMode"
    [17:33:45.1936] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "DeviceTree"
    [17:33:45.1945] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "AppleLogo"
    [17:33:45.1954] amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "LLB" has been previously personalized; skipping it
    [17:33:45.1963] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging1"
    [17:33:45.1972] amai: _AMAuthInstallBundleCreateServerRequestDictionary: nothing to be done
    [17:33:45.1984] <DFU Device 0x60800032f8c0>: production fused device
    [17:33:45.1994] requested restore behavior: Erase
    [17:33:45.2002] device software does not support nonce generation
    [17:33:45.2011] Issued GETSTATE request: state = 0x2
    [17:33:45.2019] <DFU Device 0x60800032f8c0>: operation 2 progress 0
    [17:33:45.2029] Issuing DNLOAD request
    [17:33:45.2045] Issued GETSTATUS request: state = 5 status = 0
    [17:33:45.2062] <DFU Device 0x60800032f8c0>: operation 2 progress 2
    [17:33:45.2075] Issuing DNLOAD request
    [17:33:45.2128] Issued GETSTATUS request: state = 5 status = 0
    [17:33:45.2147] <DFU Device 0x60800032f8c0>: operation 2 progress 5
    [17:33:45.2164] Issuing DNLOAD request
    [17:33:45.2233] Issued GETSTATUS request: state = 5 status = 0
    [17:33:45.2252] <DFU Device 0x60800032f8c0>: operation 2 progress 7
    [17:33:45.2269] Issuing DNLOAD request
    [17:33:45.2337] Issued GETSTATUS request: state = 5 status = 0
    [17:33:45.2355] <DFU Device 0x60800032f8c0>: operation 2 progress 10
    [17:33:45.2371] Issuing DNLOAD request
    [17:33:45.2442] Issued GETSTATUS request: state = 5 status = 0
    [17:33:45.2460] <DFU Device 0x60800032f8c0>: operation 2 progress 12
    [17:33:45.2476] Issuing DNLOAD request
    [17:33:45.2546] Issued GETSTATUS request: state = 5 status = 0
    [17:33:45.2566] <DFU Device 0x60800032f8c0>: operation 2 progress 15
    [17:33:45.2582] Issuing DNLOAD request
    [17:33:45.2653] Issued GETSTATUS request: state = 5 status = 0
    [17:33:45.2671] <DFU Device 0x60800032f8c0>: operation 2 progress 17
    [17:33:45.2688] Issuing DNLOAD request
    [17:33:45.2758] Issued GETSTATUS request: state = 5 status = 0
    [17:33:45.2777] <DFU Device 0x60800032f8c0>: operation 2 progress 20
    [17:33:45.2794] Issuing DNLOAD request
    [17:33:45.2861] Issued GETSTATUS request: state = 5 status = 0
    [17:33:45.2874] <DFU Device 0x60800032f8c0>: operation 2 progress 22
    [17:33:45.2885] Issuing DNLOAD request
    [17:33:45.2964] Issued GETSTATUS request: state = 5 status = 0
    [17:33:45.2978] <DFU Device 0x60800032f8c0>: operation 2 progress 25
    [17:33:45.2988] Issuing DNLOAD request
    [17:33:45.3068] Issued GETSTATUS request: state = 5 status = 0
    [17:33:45.3078] <DFU Device 0x60800032f8c0>: operation 2 progress 28
    [17:33:45.3088] Issuing DNLOAD request
    [17:33:45.3172] Issued GETSTATUS request: state = 5 status = 0
    [17:33:45.3190] <DFU Device 0x60800032f8c0>: operation 2 progress 30
    [17:33:45.3207] Issuing DNLOAD request
    [17:33:45.3277] Issued GETSTATUS request: state = 5 status = 0
    [17:33:45.3297] <DFU Device 0x60800032f8c0>: operation 2 progress 33
    [17:33:45.3313] Issuing DNLOAD request
    [17:33:45.3383] Issued GETSTATUS request: state = 5 status = 0
    [17:33:45.3402] <DFU Device 0x60800032f8c0>: operation 2 progress 35
    [17:33:45.3418] Issuing DNLOAD request
    [17:33:45.3486] Issued GETSTATUS request: state = 5 status = 0
    [17:33:45.3506] <DFU Device 0x60800032f8c0>: operation 2 progress 38
    [17:33:45.3522] Issuing DNLOAD request
    [17:33:45.3592] Issued GETSTATUS request: state = 5 status = 0
    [17:33:45.3611] <DFU Device 0x60800032f8c0>: operation 2 progress 40
    [17:33:45.3625] Issuing DNLOAD request
    [17:33:45.3698] Issued GETSTATUS request: state = 5 status = 0
    [17:33:45.3717] <DFU Device 0x60800032f8c0>: operation 2 progress 43
    [17:33:45.3734] Issuing DNLOAD request
    [17:33:45.3804] Issued GETSTATUS request: state = 5 status = 0
    [17:33:45.3822] <DFU Device 0x60800032f8c0>: operation 2 progress 45
    [17:33:45.3839] Issuing DNLOAD request
    [17:33:45.3908] Issued GETSTATUS request: state = 5 status = 0
    [17:33:45.3928] <DFU Device 0x60800032f8c0>: operation 2 progress 48
    [17:33:45.3945] Issuing DNLOAD request
    [17:33:45.4014] Issued GETSTATUS request: state = 5 status = 0
    [17:33:45.4027] <DFU Device 0x60800032f8c0>: operation 2 progress 50
    [17:33:45.4040] Issuing DNLOAD request
    [17:33:45.4117] Issued GETSTATUS request: state = 5 status = 0
    [17:33:45.4137] <DFU Device 0x60800032f8c0>: operation 2 progress 53
    [17:33:45.4153] Issuing DNLOAD request
    [17:33:45.4223] Issued GETSTATUS request: state = 5 status = 0
    [17:33:45.4242] <DFU Device 0x60800032f8c0>: operation 2 progress 56
    [17:33:45.4258] Issuing DNLOAD request
    [17:33:45.4327] Issued GETSTATUS request: state = 5 status = 0
    [17:33:45.4346] <DFU Device 0x60800032f8c0>: operation 2 progress 58
    [17:33:45.4363] Issuing DNLOAD request
    [17:33:45.4432] Issued GETSTATUS request: state = 5 status = 0
    [17:33:45.4449] <DFU Device 0x60800032f8c0>: operation 2 progress 61
    [17:33:45.4466] Issuing DNLOAD request
    [17:33:45.4537] Issued GETSTATUS request: state = 5 status = 0
    [17:33:45.4555] <DFU Device 0x60800032f8c0>: operation 2 progress 63
    [17:33:45.4571] Issuing DNLOAD request
    [17:33:45.4643] Issued GETSTATUS request: state = 5 status = 0
    [17:33:45.4660] <DFU Device 0x60800032f8c0>: operation 2 progress 66
    [17:33:45.4677] Issuing DNLOAD request
    [17:33:45.4748] Issued GETSTATUS request: state = 5 status = 0
    [17:33:45.4766] <DFU Device 0x60800032f8c0>: operation 2 progress 68
    [17:33:45.4783] Issuing DNLOAD request
    [17:33:45.4853] Issued GETSTATUS request: state = 5 status = 0
    [17:33:45.4872] <DFU Device 0x60800032f8c0>: operation 2 progress 71
    [17:33:45.4889] Issuing DNLOAD request
    [17:33:45.4959] Issued GETSTATUS request: state = 5 status = 0
    [17:33:45.4979] <DFU Device 0x60800032f8c0>: operation 2 progress 73
    [17:33:45.4996] Issuing DNLOAD request
    [17:33:45.5064] Issued GETSTATUS request: state = 5 status = 0
    [17:33:45.5083] <DFU Device 0x60800032f8c0>: operation 2 progress 76
    [17:33:45.5099] Issuing DNLOAD request
    [17:33:45.5169] Issued GETSTATUS request: state = 5 status = 0
    [17:33:45.5188] <DFU Device 0x60800032f8c0>: operation 2 progress 78
    [17:33:45.5205] Issuing DNLOAD request
    [17:33:45.5275] Issued GETSTATUS request: state = 5 status = 0
    [17:33:45.5293] <DFU Device 0x60800032f8c0>: operation 2 progress 81
    [17:33:45.5309] Issuing DNLOAD request
    [17:33:45.5381] Issued GETSTATUS request: state = 5 status = 0
    [17:33:45.5400] <DFU Device 0x60800032f8c0>: operation 2 progress 84
    [17:33:45.5416] Issuing DNLOAD request
    [17:33:45.5485] Issued GETSTATUS request: state = 5 status = 0
    [17:33:45.5505] <DFU Device 0x60800032f8c0>: operation 2 progress 86
    [17:33:45.5522] Issuing DNLOAD request
    [17:33:45.5591] Issued GETSTATUS request: state = 5 status = 0
    [17:33:45.5609] <DFU Device 0x60800032f8c0>: operation 2 progress 89
    [17:33:45.5626] Issuing DNLOAD request
    [17:33:45.5697] Issued GETSTATUS request: state = 5 status = 0
    [17:33:45.5716] <DFU Device 0x60800032f8c0>: operation 2 progress 91
    [17:33:45.5732] Issuing DNLOAD request
    [17:33:45.5802] Issued GETSTATUS request: state = 5 status = 0
    [17:33:45.5821] <DFU Device 0x60800032f8c0>: operation 2 progress 94
    [17:33:45.5838] Issuing DNLOAD request
    [17:33:45.5907] Issued GETSTATUS request: state = 5 status = 0
    [17:33:45.5925] <DFU Device 0x60800032f8c0>: operation 2 progress 96
    [17:33:45.5942] Issuing DNLOAD request
    [17:33:45.6013] Issued GETSTATUS request: state = 5 status = 0
    [17:33:45.6032] <DFU Device 0x60800032f8c0>: operation 2 progress 99
    [17:33:45.6049] Issuing DNLOAD request
    [17:33:45.6064] Issued GETSTATUS request: state = 5 status = 0
    [17:33:45.6079] Issuing DNLOAD request
    [17:33:45.6093] Issued GETSTATUS request: state = 6 status = 0
    [17:33:45.6623] Issued GETSTATUS request: state = 7 status = 0
    [17:33:45.6644] <DFU Device 0x60800032f8c0>: DFU succeeded
    [17:33:45.6661] Finished DFU Restore Phase: Successful
    [17:33:45.7672] DFU mode device disconnected
    [17:33:45.7686] Device removed when in state Restoring, moving device to transition state
    [17:33:45.7699] Changing state from 'Restoring' to 'Transitioning'
    [17:33:45.7711] Creating timer to monitor transition
    [17:38:45.7546] Restore completed, status:4005
    [17:38:45.7546] Failure Description:
    [17:38:45.7546] Depth:0 Error:Device disappeared during timed transition

    Take a look here for options.
    https://www.apple.com/support/ipad/repair/

Maybe you are looking for