Ibook late 04 max ram?

i need to update,white 14.?" ibook g4/ 2.1mhz  late 04 what is max ram? Will pc3200 work or pc2700, it calls for pc2100.
Thanx,
Dan

daniel schafer wrote:
i need to update,white 14.?" ibook g4/ 2.1mhz  late 04 what is max ram?
This depends on the exact model. (There is no such thing as a 2.1 mhz iBook.) If it's the Late 2004 model (as stated):
http://www.everymac.com/systems/apple/ibook/stats/ibook_g4_1.33_14.html
then the maximum RAM is 1.25 GB, accomplished by adding a 1 GB module in the one user-accessible RAM slot.
http://eshop.macsales.com/MyOWC/Upgrades.cfm?model=200

Similar Messages

  • Best OS for iBook 600hz/max RAM - 10.3.x? - 10.4.x? - Target Disk Install?

    I am going to upgrade the system on a friends iBook. Right now it has a very early version of OS X. I would like to put 10.4.xx on there, but am wondering if for any reason, due to it's age/speed, I should use 10.3.x instead? I have installed 10.4.xx on an 800hz maxed RAM iBook and it works just fine, should I expect similar results on the slower iBook? Any other tips? Thanks
    Also, can I install 10.4 on the iBook from a retail DVD, in the drive of my Intel mac, with the iBook connected via firewire as a target disk? (I don't think it has a combo or super drive, but connects fine to the Intel MacBook as a target disc)If not by connecting to the Intel, how about if connected as a target disc to the Powermac G5?

    An iBook 600 MHz can be upgraded to 640 MB with a 512 RAM module if this hasn't already been done. If the hard drive hasn't been upgraded, the small hard drive likely is (in my opinion) to be the most limiting factor in using a modern version of OS X on it.
    +can I install 10.4 on the iBook from a retail DVD, in the drive of my Intel mac, with the iBook connected via firewire as a target disk?+
    No because you have to boot from the Tiger DVD to do the installation, and, as I understand it, no retail Tiger DVDs were produced to work with a Mac with an Intel processor. You perhaps could use an external FireWire drive to accomplish the installation. Or stick with Panther, which came on CDs. There are a few retail Tiger CD sets out there, too, in case you didn't realize that.
    See information on work-arounds for non-DVD-equipped Macs in this article:
    http://www.oreillynet.com/mac/blog/2005/05/thecats_mustachesinstalling.html

  • What is the max ram for a iMac DV 400mhz? (family M5521)

    I've read several posts on this forum about the max memory for this iMac. Several people say it's 512 then usually someone comes back and says "Actually it's 1024". As per the Apple specs page (posted below) the Min is 64MB and the Max is 512MB. Is that overall system, or per slot? I'm guessing it's per slot, since it has two slots and the Ram Sizes states it can handle a 512 chip (2 slots @ 512 ea. = 1024) am I wrong in this?
    Thanks,
    -Matt
    RAM Slots: 2, PC100 DIMM
    Min - Max RAM: 64 MB - 512 MB
    Min RAM Speed:
    RAM Sizes: 64, 128, 256, 512 MB
    iMac DV 400Mhz 512Mb   Mac OS X (10.3.9)  

    First ensure that you have the correct firmware installed. See Announcement: iMac (Slot Loading): Install iMac Firmware 4.1.9 Before Mac OS X 10.2 or later.
    You will need OS 9 installed on the hard drive to install that firmware update. If OS 9 is currently on the hard drive you can install the firmware update (if needed) before swapping the hard drive.
    Yes you can install OS 10.3 directly without installing OS 9. If there is any possibility that you will want to boot from OS 9 in the future, ensure that you pick the option to install the OS 9 disk drivers.

  • IMac G4 20" 1.25GHz:  Max RAM?

    As with my iBook, I'm getting conflicting max RAM numbers for my iMac. Can someone tell me? (Max recognized/utilized/etc). Are these 200-pin SODIMMS @ PC2700 (333mhz)?
    Also, the drop down box on this page:
    www.transintl.com/store/category.cfm?Category=2448
    lists separate chips for "user" and "factory" slots, compounding the confusion...
    Thanks in advance for the facts,
    Thx,
    Ethan
    Phoenix, AZ

    The iMac G4 DDR RAM has two different RAM slots. One is located behind the 'user access' plate and this is the 'user' slot according to Apple it will take up to 512Mb PC2700(333MHz) 200pin SODIMM (laptop memory). The other slot is the 'factory slot' this is for a PC2700 (333MHz) 186pin DIMM (desktop memory). This will have a 256Mb or 512Mb chip already installed - as supplied by Apple.Since the iMac G4 20" was issued the 1Gb SODIMMs /DIMMs have become available and several suppliers are now suppling 1Gb PC2700 SODIMMs/DIMMs for the iMac G4 20", so the RAM maximum should be 2Gb(?) However I am struggling to find anyone who has actually done this to confirm it.
    Crucial.com will assume you aren't going to touch the factory slot.
    Here is a link to the instructions to change the factory RAM.
    Powerbook G4 Titanium 1GHz SD (RW fixed) 1Gb 60Gb Panther     Possibly ???? iMac G4 20" 1.25GHz 1Gb 320Gb Tiger ????

  • HP Pavilion DV2700 Special Edition what is the max ram for this model laptop?

    HP Pavilion DV2700 VERVE Special Edition
    Operating System  Windows Vista 64 bit Service Pack 2
    Year made 2007 
    Processor AMD Turion 64 X2 TL- 60 2.0 GHz
    Current Ram 4GB
    would like to know what is the max ram 
    PS 
    Can i install and other Processor or is this and intergrated one with the motherboard.? 
    In Advance thank you for your time to look at my question
    Indarktimes
    This question was solved.
    View Solution.

    Hi
    Please find the link given below for your model off unit Max Memory supported is 4GB.
    http://h10010.www1.hp.com/wwpc/ca/en/ho/WF06a/12139188-78299199-78299212-78299212-78299212-81135202....
    Let us know how it goes!
    "I work for HP."
    ****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    Regards
    Manjunath

  • I have MacBook Pro 2.2GHz Intel Core i7 (15-inch DDR3) Early-2011 and I want to upgrade RAM, What is the MAX RAM can I get it 8GB or 16GB?

    I have MacBook Pro 2.2GHz Intel Core i7 (15-inch DDR3) Early-2011 and I want to upgrade RAM, What is the MAX RAM can I get it 8GB or 16GB?

    Maximum Memory     16 GB (Actual) 8 GB (Apple)
    Memory Slots     2 - 204-pin PC-10600 (1333 MHz) DDR3 SO-DIMM

  • What's the max RAM for HP Elite 8200 minitower?

    Hi, I'm looking at getting an HP Compaq 8200 Elite CMT PC (part number LE245PA) and have a question about the maximum RAM it will take. The PC is the one at http://h10010.www1.hp.com/wwpc/au/en/sm/WF05a/12454-12454-64287-3328898-3328898-5037949.html?dnr=1
    Page 10 of http://h18004.www1.hp.com/products/quickspecs/13879_na/13879_na.pdf is a bit ambiguous and I can't work out whether the max is 16GB, or whether it is 32GB.
    It says "1GB, 2GB, and 4GB DDR3 DRAM technologies are supported. Using 4 GB device technologies, the largest memory capacity possible is 32 GB, assuming dual channel mode with four x 8 GB dual ranked unbuffered DIMM memory configuration".
    But then the table at the bottom of the same page seems to imply that that maximum is 16GB.
    Can anyone please advise whether the maximum is 16GB or 32GB in this model?
    This question was solved.
    View Solution.

    Hi:
    I don't understand all that rigamarole.
    It is very confusing. It appears that HP copied some info from Intel regarding the chipset's specs and I couldn't make heads or tails of it on the Intel site either.
    Max RAM per slot is 4 GB.
    I installed 16 GB in mine.
    Paul

  • I am looking to get a new 13 inch mac book pro, what is the max RAM that I can install.  I know configured from Apple is 8 GB, but can I put 16 GB after?

    i am looking to get a new 13 inch mac book pro, what is the max RAM that I can install.  I know configured from Apple is 8 GB, but can I put 16 GB after?

    Yes, you can install 16GB in your new macbook pro.
    Go here (OWC) and here (Crucial) to give you options on how much you want to spend.
    Good luck.

  • What's the max RAM for W500?

    Does anyone know the max RAM a W500 can take?
    W500 T9900 8GB + TBs imageries

    hi twnrsworld,
    You find the detail system specifications from the link below.
    http://support.lenovo.com/en_US/product-and-parts/detail.page?DocID=PD001301
    Regards

  • Max ram under 8.6

    Hello,
    Someone gave me their old B & W G3 400mhz tower with no ram. It's running OS 8.6 (yes I have a copy). I put in it a 256mb stick, 128mb stick, and a 64mb stick yet the system profiler says 128mb, 128mb, and 64mb for a total of 320mb instead of 448mb.
    So is it the G3 not recognizing the 256mb stick or is it 8.6?
    What is the maximum ram that 8.6 see? Could I put 4x256 in it and use 1024mb or would I need to get system 9x?
    iMac DV 400   Mac OS 9.2.x  

    Hi, n8mac -
    The max RAM for a B&W G3 is 1.0GB - four sticks of 256MB each.
    OS 8.6 should have no issue with a 256MB stick.
    Usually when a stick of RAM reports as being half of what it should be, the problem is that the RAM module is not of the correct type.
    Specifically, on p. 35 of the B&W User manual it includes this in the description of the RAM specs -
        "Maximum number of memory devices on DIMM is 16."
    A 'memory device' is one of the small dark gray or black blocks on a RAM module. All the ones I've seen which meet that requirement have 8 on each side of the stick. If that requirement is not met, the stick is usually reported as being half the size it should be.
    You can also download and run DIMM First Aid to check whether the RAM is fully compatible.

  • Can anyone answer this question regarding MAX RAM?

    My old iMac SE DV graphite was purchased and delivered in January, 2000. The original order catalog (which I kept) claimed that it was "expandable to 512mb", as were all the 400mhz G3 slot-loading DV models in various 'flavors' including my Graphite Special Edition model. Also, both / all versions had the ATIRage 128 accelerator with 8mb SDRAM.
    The only differences I can discern are that my Graphite has more ram (128mb) and had a slightly bigger hard drive (13GB on the graphite vs 10GB for the 'fruit').
    Note: I have since replaced the hard drive with a 20GB since the original died within the first 2 years.
    Also, I am running in 10.3.9 most of the time but still have OS 9.2.2 in the machine.
    On this disussion site and other places (including MacWorld articles) I've seen conflicting statements as regards the MAXIMUM RAM my graphite should/could have. Some say 1GB (2x512) and some say 512 (2x256).
    Can anyone once and for all, settle this question for me so that I can make an intelligent purchase?
    (and thank you for the info re: PC100 as the way to go, not PC133)
    Thanks & Peace to all.

    This question was answered in your other post by me. Max RAM is 1 GB.

  • Power Mac G5 Quad - 6 GB RAM - OSX 10.5.8 - Max RAM available?

    Hello All,
    I have (as the subject reads) a G5 Quad 2.5 GHz with 6 GB RAM running OSX 10.5.8. I use it as a Digital Audio Workstation (DAW) and have a question regarding RAM and "bits."
    Is my computer capable of using all 6 GB of RAM at this point? How much RAM could I add - if any - and get the most out of my machine? I read somewhere that Leopard can only handle 4 GB of RAM, but am not too sure. I would like to max out the RAM, but if it only handles 4 GB, then there's no point. I have a Pentium 4 PC with 4 GB RAM and know that XP can handle only up to ~3.6 GHz, but OSX I am not too sure.
    Lastly, what bit-rate is my computer capable of? The box says it is 64 bit, but as I understand, Leopard is only 32 bits. Since the businessmen at Apple chose to make 10.6 available only for Intel Macs, it seems that 64 bits will not be available on my machine. Pretty confusing stuff...
    So, what do you guys think? What's the max RAM that my G5 Quad can use running OSX Leopard? And what exactly is the "bits" deal with my setup all about?
    Thanks in advance for your help! Happy new year!
    Cheers,
    Cam.

    You can add 2*2GB sticks to the 6*1GB sticks you have, no penalty.
    I'd update to 10.5.8 & any other updates, he latest Security update seemed to improve both CPU & RAM usage.
    I have 10GB...
    DIMM0/J6700:
    Size: 1 GB
    Type: DDR2 SDRAM
    Speed: PC2-4200U-444
    Status: OK
    Manufacturer: Unknown
    Part Number: Unknown
    Serial Number: Unknown
    DIMM1/J6800:
    Size: 1 GB
    Type: DDR2 SDRAM
    Speed: PC2-4200U-444
    Status: OK
    Manufacturer: Unknown
    Part Number: Unknown
    Serial Number: Unknown
    DIMM2/J6900:
    Size: 2 GB
    Type: DDR2 SDRAM
    Speed: PC2-4200U-444
    Status: OK
    Manufacturer: Unknown
    Part Number: Unknown
    Serial Number: Unknown
    DIMM3/J7000:
    Size: 2 GB
    Type: DDR2 SDRAM
    Speed: PC2-4200U-444
    Status: OK
    Manufacturer: Unknown
    Part Number: Unknown
    Serial Number: Unknown
    DIMM4/J7100:
    Size: 2 GB
    Type: DDR2 SDRAM
    Speed: PC2-4200U-444
    Status: OK
    Manufacturer: Unknown
    Part Number: Unknown
    Serial Number: Unknown
    DIMM5/J7200:
    Size: 2 GB
    Type: DDR2 SDRAM
    Speed: PC2-4200U-444
    Status: OK
    Manufacturer: Unknown
    Part Number: Unknown
    Serial Number: Unknown
    DIMM6/J7300:
    Size: Empty
    Type: Empty
    Speed: Empty
    Status: Empty
    Manufacturer: Empty
    Part Number: Empty
    Serial Number: Empty
    DIMM7/J7400:
    Size: Empty
    Type: Empty
    Speed: Empty
    Status: Empty
    Manufacturer: Empty
    Part Number: Empty
    Serial Number: Empty

  • What is the max RAM capacity of HP Pavilion 15 Notebook PC

    I have 2GB RAM. I want increse my PC RAM what is the max RAM cpacity of my PC
    Product Name: HP Pavilion 15 Notebook PC
    Product number: F0C25PA#ACJ

    Hi,
    Your machine is a "HP Pavilion 15-e024tu" which has 2 user accessible slots:
       http://support.hp.com/us-en/document/c03921877
    and its supports (page #4 of the manual)
    Support for DDR3L (1600-MHz) dual channel
    Support for 8192-MB of system RAM in the following configurations:
    ● 8192-MB (8192-MB×1, 4096-MB×2)
    ● 6144-MB (4096-MB+2048-MB)
    ● 4096-MB (4096-MB×1, 2048-MB×2)
    ● 2048-MB (2048-MB×1)
    Please use the following manual to get more information (RAM type) and how to replace RAM:
       http://h10032.www1.hp.com/ctg/Manual/c03939658
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Can a 2008 mac book 4.1 use a ssd? Also what is max RAM upgr?

    Can a 2008 mac book 4.1 use a SSD? Also what is max RAM upgrade possible beyond 4GB?

    Does it matter on the SATA II or III, for the bus?

  • Hp pavilion Dv7-4143ea what is max RAM

    What is maximum RAM I can install8 or 16?
    Can I fit an SSD (1gb)

    Hi,
    1. Max RAM: It supports up to 8GB:
         http://support.hp.com/sg-en/document/c02680687
    2. Yes, you can use 1TB SSD. They are very cheap now, only around 40 cents/GB
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Maybe you are looking for

  • Cant find expose and spaces in system preferences

    I cant seem ti find "expose and spaces" in system preferences.  Can anybody help please?

  • Takes me back to Events after editing a picture

    This is MOST annoying. If I make edits on a single picture in an event, when I click "Done" in the lower right, it takes me back to the Events thumbnails instead of back to the picture I was working on...or even the Event I was in. I'm running versio

  • Revoking of Released Purchase order

    Dear All, My PO has three level of release 1st user ,2nd GM and 3 RD Chief procurement head. 2nd level is not able to apporve unless level 1 has apporve dthe dodcument and subsequently level 3 cannot approve unless level 1st and 2 nd has approved. No

  • Output types for ALE

    Iam sending Po data from SAP to XI Through idoc using ale.as soon as user saves PO data it should go to XI.For this i should configure output types.how to configure output types to send data through ale.

  • How to add From date & To date in PLD

    Dear Experts, How can i add From Date & To Date in Manage Previous External Reconsilation PDL? I am using inbuild SAP PDL.. In Manage Previous External Reconsilation-Selection Criteria I am selecting  GL Acc & Date From & Date To. Date From & Date To