IBook making horrible noises and now my hard drive is missing?!

This morning my iBook started making this horrible noise and then none of my programs would respond. I was able to temporarily fix it using disk utility. It then started again a few hours ago. I tried doing what I did before, but this time it didnt work. I have also been getting a flashing ? at start up. I tried all the steps listed here:
http://docs.info.apple.com/article.html?artnum=58042
and none of them worked.
When I booted from the Mac OSX disk, my Hard Drive wasnt mounted so I went through al the steps for resetting the PRAM and that didnt work either. I finally went to do Archive Install and now I have no Hard Drive!?
Please help me!!

Hi, Rachel. Welcome to Apple Discussions.
I would recommend investing in DiskWarrior to repair your hard drive. It can often find the drive when Apple's own Disk Utility cannot.
My advice would be to buy DiskWarrior, use it to repair your hard drive, and then do the Archive and Install.
Good luck.

Similar Messages

I have just installed a new hard drive in my imac intel 20" (2006) and now the hard drive does not show up in the 'select destinations' folder of the install program.

I have just installed a new hard drive in my imac intel 20" (2006) and upgraded the memory and now the hard drive does not show up in the 'select destinations' folder of the install program. I can see the hard drive in the disk utilities window however it wont let me do anything.
It is a seagate 1TB SATA II drive however it is displaying it as a 7.3 TB.
If anyone has any suggestions I would be happy to hear them.
I have tried to erase and partition and get the same error message each time, 'Input/Output error'.
I have tried starting the thing with the install disk which is Mac OS X (Tiger?) which came with the computer. No good.
Anyone?

Thats correct. I can see it in the list however when I attempt to erase it or partition it it's like it's not being found or recognised and it throws up the input/output error message. I am pretty sure that the sensor it attached correctly and it is a SATA drive. I can see all the infor regarding the drive when disk utility is open and it all looks good but I cant access it or do anything with it. It's taunting me!
The install disk is in the drive and the install program runs right up to the point where you have to select the location for the install and there is just nothing in the box where you have to select the hard drive icon.
I have my suspiscions about the drive but any help would be appreciated.

10.4.9 and now USB Hard Drive(s) Won't Mount

After running the combo updater on my Intel Core Duo iMac 17" my LaCie BigDisk won't mount nor will my 60GB USB hard drive that I use to backup my MacBook (though this drive DOES mount on the MacBook without any problems). All other USB devices (and my 160GB Western Digital USB Hard Drive and 300GB Seagate FireWire hard drive mount and work fine on the iMac). My LaCie BigDisk wouldn't mount on my MacBook at first, but eventually mounted ONCE on the MacBook. I have tried repairing permissions, rebooting, using an older IOUSBFamily.kext (that was a nightmare and required some CLI experience to undo without having to find a firewire cable that long enough to reach around my desk to use the iMac via Target Mode on the MacBook good thing I saved the original).
At any rate here is the error output in Console.app:
Mar 13 20:32:59 iMac kernel[0]: USBF: 426. 4 ControlTransaction: control packet 1 error 0xe0004057
Mar 13 20:32:59 iMac kernel[0]: USBF: 426. 4 AppleUSBEHCI[0x3af4000]::DeviceRequest - buffer dmaCommand (0x39b3900) already had memory descriptor (0x3f54a00) - clearing
Mar 13 20:32:59 iMac kernel[0]: USBF: 426. 5 AppleUSBEHCI[0x3af4000]::ControlPacketHandler - unexpected command BufferMemoryDescriptor(0x46a0d00)
Mar 13 20:32:59 iMac kernel[0]: USBF: 426. 35 AppleUSBEHCI[0x3af4000]::DeviceRequest - dmaCommand (0x39b3900) already had memory descriptor (0x46a0d00) - clearing
Mar 13 20:34:08 iMac kernel[0]: USBF: 495.663 AppleUSBEHCI[0x3af4000]::Found a transaction which hasn't moved in 5 seconds on bus 253, timing out!
[Above Repeating for a long time]
Mar 13 20:34:12 iMac kernel[0]: USBF: 499.351 [0x3bd7800] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 2 of hub @ location: 0xfd300000)
Mar 13 20:34:12 iMac kernel[0]: USBF: 499.352 [0x3bd7800] The IOUSBFamily was not able to enumerate a device
Any help would be appreciated!

Anyone else having this problem?
Possibly.. my Lacie hard drive (firewire) has stopped working since I updated to 10.4.9 with the device attached. See: http://discussions.apple.com/thread.jspa?threadID=889519&tstart=45
iMac G5 iSight 2.1GHz, iBook G4 1.42GHz, iMac G3 Snow 700MHz, 2x iSight Mac OS X (10.4.9)

Crashed and now "my" hard drive seems to be called MATSHITADVD-R

Computer froze so I forced it to shut down and then upon restart all i had was a grey screen with a folder and flashing question mark. I went to disk utilites to try to repair what went wrong and now it shows my hard drive as being called MATSHITADVD-R any ideas? Is all of my info lost?
Thanks

Hi mwafle, and a warm welcome to the forums!
That means your Mac isn't seeing the Hard drive at all, most likely dead, they last very few years anymore, sorry.
That is your CD/DVD Drive.

IMac Had Many Issues and Now Internal Hard Drive is named Media and...

My iMac had the error where when you turned off the iMac it would freeze at the apple logo. I then tried verifying it using Disk Utility and it failed. So I just said because I have it backed up Ill reinstall mac and install the backup, but now my Internal HD became named Media and now claims to only have 0 bytes, help!

Your HDD is dead, contact Apple and see what they can do.

Help - 9.0 install failing and eating my hard drive / Premier missing

I have windows 7 / 64 bit / home premium - 3/0 Ghz / Quad core
I posted earlier. I have tried several times to load 9.0. during my first unsuccessful install, the "creating catalog process" hung, and after I closed the program, my hard disk space decreased by 45 GB.
I then uninstalled, shut down, cleared all temp files, defragged, optimized disk, and cleaned up registry. I then re-instelled and it hung on "Creating catalog" again. I figured I would let it go and see what happened. I returned 40 minutes later and it was nowhere. I cllicked and it said "not reposnding".
Now - I check my hard drive , and it has decreased from an available 120 GB (before 1st install ) to now only 31.7 GB! I can not find where my hard drive is being conusmed.
As a second step, I tried to load disk 1 and disk 2 on another computer. Elements installed ok, but on loading Disk 2, it gave me the same error as Pc #1 - It said Program is corrupt or not installed. Also note that Disk 1 does not install Premier elements on either computer - no where to be found. Isn't Disk 2 suppose to only be content.?
I need help badly.
Thanks

Hi,
Could I please request you to provide us following log files so that we can debug your issue:
Location: Go to Start Menu-> Run->%temp%
Files: Pre9.log, PRE9Installer.log.
Yes, you are right that you need to install application(Disk 1) first before installing Content(Disk 2). So, insert Premiere Elements Disk1 and install application first. Once it is successful, then insert disk 2 to install Content.
Please note that Content will not get installed unless application is installed.
It would be great if you can provide screenshot of error messages that you are getting.
Thanks & Regards,
Gaurav

HT4906 My macbook pro is making horrible buzzing and vibrating really bad. is my hard drive crashing?

My macbook pro is vibrating and making a horrible noise.
Is my hard drive about to crash?

Back up quickly.
Better make two backups - one bootable clone.
And I'll ask for your question to be relocated to the MacBook Pro forum.

HP Color LaserJet Pro MFP M177fw makes horrible noise and will not move past initializing

Makes horrible noise and will not move past initializing.

Hi @HealthITLadyRed,
I read your post and see that the printer is making noise and is stuck initializing. I would really like to be able to help you resolve this issue.
I have provided some steps to try to see if we can resolve this issue.
Check and remove any packaging material inside the printer and toner.
Disconnect the USB/Network/FAX and power the printer on Standalone.
Do a hard reset to see if that will resolve the issue.
Leave the printer on and unplug the power cable from the printer and wall outlet for 60 seconds.
Then reconnect the power cable to the printer and wall outlet rather than a surge protector.
This ensures the printer is receiving full power and may help this situation.
If the issue persists, perform a power drain by disconnecting the power cord from the back of the printer and keeping the power button pressed for 30 seconds and in case of a power switch keep the switch in ON position for 30 seconds before reconnecting the power chord.
Update the printer's firmware by a USB connection. Software and Drivers.
Select Option 2 and wait for the page to load and then select the link for firmware. This resolved the previous posters issue.
I can send a private message with another step to try.
In the forum beside your handle name just click on the envelope to view it.
How is the printer connected? (USB/Ethernet/Wireless)
What happened prior to this issue? (paper jam, changed toner) Any feedback would be appreciated.
Is this a new printer?
If you appreciate my efforts, please click the Thumbs up button below.
If there is anything else I can help you with, just let me know. Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Making weird noise and won't go into disc mode and all kinds of icons

after having many problems, i managed to get my ipod into disc mode and format it. However, i'm still having similar problems. When i turn it on, it goes on normally but when i connect it to my computer it freezes it. When i try to restart the ipod while connected to the computer, i get the battery is discharged icon, or sometimes the sick icon first and then the discharged icon, and i'm not able to put it into disc mode. After i get the icons, the only way i can get it to start again is to toggle the hold switch many times (took me awhile to figure this out..). Also, the ipod makes a weird repeated disc noise sometimes when its connected or if i'm starting it. If i try to restart the ipod without it being connected to the computer, i get the sick icon until i toggle the hold switch. can anybody help? thanks!
actually, i've managed to get it into disc mode, but it just makes the repeated weird noise nonstop and it doesn't let me open any programs on my computer so i can't format it.

Hello,
If a sad iPod icon or an exclamation point and folder icon appears on your iPod’s screen, or with sounds of clicking or HD whirring, it is usually the sign of a hard drive problem and you have the power to do something about it now. Your silver bullet of resolving your iPod issue – is to restore your iPod to factory settings.
http://docs.info.apple.com/article.html?artnum=60983
If you're having trouble, try these steps at different levels one at a time until the issue is resolved. These steps will often whip your iPod back into shape.
Make sure you do all the following “TRYs”
A. Try to wait 30 minutes while iPod is charging.
B. Try another FireWire or USB through Dock Connector cable.
C. Try another FireWire or USB port on your computer .
D. Try to disconnect all devices from your computer's FireWire and USB ports.
E. Try to download and install the latest version of iPod software and iTunes
http://www.apple.com/ipod/download/
http://www.apple.com/itunes/download/
F. Try these five steps (known as the five Rs) and it would conquer most iPod issues.
http://www.apple.com/support/ipod/five_rs/
G. Try to put the iPod into Disk Mode if it fails to appear on the desktop
http://docs.info.apple.com/article.html?artnum=93651
If none of these steps address the issue, you may need to go to Intermediate level listed below in logical order. Check from the top of the lists to see if that is what keeping iPod from appearing on your computer in order for doing the Restore.
Intermediate Level
A. Try to connect your iPod with another computer with the iPod updater pre-installed.
B. Still can’t see your iPod, put it in Disk Mode and connect with a computer, instead of doing a Restore on iPod Updater. Go and format the iPod instead.
For Mac computer
1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
5. Eject your iPod and do a Reset
6. Open the iPod Updater and click “Restore”
For Window computer
Go to folder “My Computer”
Hope you can see your iPod there and right click on the iPod
Choose “Format”. Ensure the settings are at “Default” and that “Quick Format” is not checked
Now select “Format”
Eject your iPod and do a Reset
Open the iPod Updater and click “Restore”
In case you do not manage to do a “Format” on a window computer, try to use some 3rd party disk utility software, e.g.“Partition Magic”.
C. Windows users having trouble with their iPods should locate a Mac user. In many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
Tips
a. It does not matter whether the format is completed or not, the key is to erase (or partly) the corrupted firmware files on the Hard Drive of the iPod. After that, when the iPod re-connected with a computer, it will be recognized as an fresh external hard drive, it will show up on the iPod updater.
b. It is not a difficult issue for a Mac user to find a window base computer, for a PC user, if they can’t find any Mac user, they can go to a nearest Apple Shop for a favor.
c. You may need to switch around the PC and Mac, try to do several attempts between “Format” and “Restore”
http://discussions.apple.com/thread.jspa?messageID=2364921&#2364921
Advance Level
A. Diagnostic mode solution
If you have tried trouble shooting your iPod to no avail after all the steps above, chances are your iPod has a hardware problem. The iPod's built-in Diagnostic Mode is a quick and easy way to determine if you have a "bad" iPod.
You need to restart your iPod before putting it into Diagnostic Mode. Check that your hold switch is off by sliding the switch away from the headphone jack. Toggle it on and off to be safe.
Press and hold the following combination of buttons simultaneously for approximately 10 seconds to reset the iPod.
iPod 1G to 3G: "Menu" and "Play/Pause"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Menu" and "Select"
The Apple logo will appear and you should feel the hard drive spinning up. Press and hold the following sequence of buttons:
iPod 1G to 3G: "REW", "FFW" and "Select"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Back" and "Select"
You will hear an audible chirp sound (3G models and higher) and the Apple logo should appear backwards. You are now in Diagnostic Mode. Navigate the list of tests using "REW" and "FFW". The scroll wheel will not function while in diagnostic mode. For further details on Diagnostic mode can be found at http://www.methodshop.com/mp3/ipodsupport/diagnosticmode/
Try to do the 5in1, HDD R/W and HDD scan tests. Some successful cases have been reported after the running the few tests under the Diagnostic mode. In case it does not work in your case, and the scan tests reports show some errors then it proves your iPod has a hardware problem and it needs a repairing service.
B. Format your iPod with a start disk
I have not tried this solution myself, I heard that there were few successful cases that the users managed to get their iPod (you must put your iPod in disk mode before connecting with a computer) mounted by the computer, which was booted by a system startup disk. For Mac, you can use the Disk Utility (on the Tiger OS system disk), for PC user, you can use the window OS system disk. Try to find a way to reformat your iPod, again it does not matter which format (FAT32, NTFS or HFS+) you choose, the key is to erase the corrupted system files on the iPod. Then eject your iPod and do a Reset to switch out from Disk Mode. Reboot your computer at the normal way, connect your iPod back with it, open the iPod updater, and hopefully your iPod will appear there for the Restore.
If none of these steps address the issue, your iPod may need to be repaired.
Consider setting up a mail-in repair for your iPod http://depot.info.apple.com/ipod/
Or visit your local Apple Retail Store http://www.apple.com/retail/
In case your iPod is no longer covered by the warranty and you want to find a second repairing company, you can try iPodResQ at your own risk
http://www.ipodresq.com/index.php
Just in case that you are at the following situation
Your iPod warranty is expired
You don’t want to pay any service charges
You are prepared to buy a new one
You can’t accept the re-sell value of your broken iPod
Rather than leave your iPod as paper-weight or throw it away.
You can try the following, but again, only do it as your last resort and at your own risk.
Warning ! – It may or may not manage to solve your problem, and with a risk that you may further damage your iPod, which end up as an expensive paper weight or you need to pay more higher repairing cost. Therefore, please re-consider again whether you want to try the next level
Last Resort Level
1. . Disconnecting the Hard Drive and battery inside the iPod – Warning !! Your iPod warranty will be waived once you open the iPod.
In Hong Kong there are some electronic shops offering an iPod service for Sad iPod, the first thing they do is to open up the iPod’s case and disconnecting the battery and the Hard Drive from the main board of the iPod. Wait for 5-10 minutes and reconnecting them back. The reason behind which I can think of is to do a fully reset of a processor of the iPod. In case you want do it itself and you believe that you are good on fixing the electronics devices and have experience to deal with small bits of electronic parts, then you can read the following of how to open the iPod case for battery and HDD replacement (with Quicktimes)
http://eshop.macsales.com/tech_center/index.cfm?page=Video/directory.html
2.Press the reset button on the Hard Drive inside the iPod – Suggestion from Kill8joy
http://discussions.apple.com/thread.jspa?messageID=2438774#2438774
Have I tried these myself? No, I am afraid to do it myself as I am squeamish about tinkering inside electronic devices, I have few experiences that either I broke the parts (which are normally tiny or fragile) or failed to put the parts back to the main case. Therefore, I agree with suggestion to have it fixed by a Pro.
2. Do a search on Google and some topics on this discussion forum about “Sad iPod”
What should I do with my iPod? Send it or keep it?
http://discussions.apple.com/thread.jspa?threadID=469080&tstart=0
Strange error on iPod (probably death)
http://discussions.apple.com/thread.jspa?threadID=435160&start=0&tstart=0
Sad Face on iPod for no apparent reason
http://discussions.apple.com/thread.jspa?threadID=336342&start=0&tstart=0
Meeting the Sad iPod icon
http://askpang.typepad.com/relevanthistory/2004/11/meeting_thesad.html#comment-10519524
Sad faced iPod, but my computer won’t recognize it?
http://discussions.apple.com/thread.jspa?messageID=2236095#2236095
iPod Photo: unhappy icon + warranty question
http://discussions.apple.com/thread.jspa?messageID=2233746#2233746
4th Gen iPod Users - are we all having the same problem?
http://discussions.apple.com/message.jspa?messageID=2235623#2235623
Low Battery, and clicking sounds
http://discussions.apple.com/thread.jspa?messageID=2237714#2237714
Sad faced iPod, but my computer won’t recognize it
http://discussions.apple.com/thread.jspa?messageID=2242018#2242018
Sad iPod solution
http://discussions.apple.com/thread.jspa?threadID=412033&tstart=0
Re: try to restore ipod and it says "can't mount ipod"
http://discussions.apple.com/thread.jspa?threadID=443659&tstart=30
iPod making clicking noise and is frozen
http://discussions.apple.com/thread.jspa?messageID=2420150#2420150
I am not suggesting that you should follow as well, but just read them as your reference. You are the person to make the call.

HT1363 ipod making clicking noise and won't work

Ipod making clicking noise and won't work. Display see apple store. We live in a rural area so one is not close!

OK, I have the 30G w/video and it does that too. I've had it a year with no problems. My husband went on the treadmill with it a couple days ago and after a few songs it froze. I did the whole regime of toggling and pressing menu/select button, I put in on my Bose speaker/charger and it switched to very low battery warning. When I took it off to move to computer it said to connect to computer and use restore (in a few languages). I connected and it recognized it and I did restore and after a few minutes screen came up saying it could NOT restore. Then ipod was unrecognized and then ipod screen gave me the very sad little ipod picture with the support web site. At that point it began making the clicking nose - morris code does describe it but I was invisioning a little nano sprite in there with a chisel!!So, same as you, I go there and it's like a maze trying to find help!! Of course my warranty was up exactly 6 weeks ago!! I tried linking through all the stuff like finding a service provider in my area, contact the "knowledge base" etc., and I can't get anyone! Now what are we gonna do?

Can i use my time capsule to wirelessly backup my macbook and its external hard drive, which up until now was it's time machine and storage? How?

Can i use my time capsule to wirelessly backup my macbook and its external hard drive, which up until now was it's time machine and storage? How?

The external drive must be connected to the Mac using either USB or FireWire
You must remove the external hard drive from the list of items that are "excluded" from backups in Time Machine Preferences.
Here's how:
Open System Preferences (gear icon on the dock)
Open Time Machine
Click Options
Look for the name of the hard drive in the list of "excluded" items and click on it to highlight it
Click the -- (minus) button at the bottom of the list to remove the hard drive from the list of "excluded" items....so it will now be backed up
Strongly recommend that you do the first backup using Ethenret from your computer to the Time Capsule since the entire contents of the external drive will be copied on the first pass. Ethernet will be 3-5 faster than wireless.
Once you have the first backup done, you can use wireless for subsequent backups since they will nornally be much smaller....unless you add large files to the external drive.

I accidentally updated iPhoto on my (now) external hard drive and now it won't let me access any of my photos. What can I do?

I accidentally updated iPhoto on my (now) external hard drive and now it won't let me access any of my photos. What can I do?

So, you have two versions of iphoto? One from the old machine and one from the new?
If so, forget about opening with the older version of iPhoto.
For the newer version:
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.

I went to Mac Store and had replaced hard drive because I encountered 4HDD ERROR(hard drive failure). I had backed up my old hard drive by TIME MACHINE regularly. Now how can I restore everything I had?

I went to Mac Store and had replaced hard drive because I encountered 4HDD ERROR(hard drive failure). I had backed up my old hard drive by TIME MACHINE regularly. Now how can I restore everything I had?

Thanks for your response.
I had tried COMMAND+ALT+R which led me to directly to INTERNET RECOVERY via wifi. After 1 hour or so it dropped me at the same point.
I've tried MIGRANT ASSISTANCE as well, it kept on LOOKING FOR OTHER COMPUTERS even though I clicked on TIME MACHINE BACK UP USING EXTERNAL HARD DRIVE
so what to do now?
P.S. Guys at MacStore were so careless to even listen to me when I asked them about retrieving back up :(
Please help

My MacBook Pro keeps making copies of a document that I am trying to save. I don't want to duplicate the file. I only want to save it on both my hard drive and my external hard drive. I do not want to change its name for every save, which the computer see

My MacBook Pro keeps making copies of a document that I am trying to save. I don't want to duplicate the file. I only want to save it on both my hard drive and my external hard drive. I do not want to change its name for every save, which the computer seems insistent on doing. Help!!

11lizzyp wrote:
can't be saved because the file is read-only.
I did not create the file to be read-only. I created to be able to continue to add to it as I work on it.
More on versions here:
http://support.apple.com/kb/ht4753
local snapshots:
http://support.apple.com/kb/HT4878
Sounds like a permissions problem ie read only.
If running repair permissions from your DiskUtility.app does not sort it,
Someone should jump in here with erudite and concise fix.

How do I deauthorize my ibook G4 and wipe the hard drive clean?

How do I deauthorize my ibook G4 and wipe the hard drive clean?

Launch iTunes. From the menu bar click Store / Deauthorize This Computer.
(Mac OS X 10.4): Erasing a disk or volume
Or... Mac OS X 10.4): Erasing disks securely

IBook making horrible noises and now my hard drive is missing?!

Similar Messages

Maybe you are looking for