IBook OS Install problems

I am preparing to sell my iBook G3 600 to move up to one of the new G4's.
I deauthorized the computer for iTMS, and then erased the HD a few times. I had upgraded to OS 10.3 and wanted to reinstall the 10.1 that came with it. It just won't take. It either freezes at the happy Mac start up screen. That happy Mac, staring at me with its smug smirk. Sorry. Other times it will freeze just before it gets to the Agreement. If it gets to the install, it just says that there were problems with the install and to try again.
It only has the stock 128 MB RAM, nothing 3rd party at all. Now that I have erased the drive, software restore doesn't do anything for me.
I ran the Apple Hardware test and everything was fine. Maybe my Combo drive is failing? I just don't know.
I do have a FW HD if I could use that in any way to get an OS loaded onto this guy.
Any thoughts or ideas?

Hi Jeff, Okay lets get this straight---you can boot up using your backup HD--Now your Backup is your primary drive.....
You could try to re-format the disk.
While booted from the backup go to disk utility and choose the iBook's volume and select erase choose the mac extended format
and os 9 drivers(if offered) click erase.
Insert the install disk into the drive and
Restart your computer holding the "option" key after you hear the chime and release it when the blue screen appears.
wait for the computer to finish looking for all bootable drives and select the install disk..then the arrow on the right side. If the disk does not show up hit the arrow on the left to recycle it--if it still doesn't show there may be a prob w/ the disk
from the install you should be able to pick the volume---Your iBook and install---good luck, glynn

Similar Messages

IBook Can't See HD/Various HD Problems/Various Install Problems

My iBook started having problems with the HD a while ago, since it was out of warranty, I decided to replace it myself. This worked for a while but then my iBook wouldn't boot from it anymore. I put it away for a while (already have my iMac and Eee PC) until I decided to work on it recently.
First, I replaced the HD again but still had various problems (don't remember exactly what). I ran various disk utility programs and would always have problems with the drive (which has been replaced twice now).
Right now I'm trying to work on it again since I'd really like to get this working. I bought another HD (after returning the previous) along with a new (used) ribbon cable off ifixit.com. At first my iBook saw the drive and booted off the OS X Install DVD. So far so good while I'm installing until the install fails and brings up the logs and I/O errors.
I try again and the same thing. Right now I tried formatting the drive again, but after a restart Disk Utility shows my drive with the volume titled "disk0s3" in grey lettering (this happened several times before). Trying to repair the drive brings up the error "The underlying task reported failure on exit" with the small log showing "Invalid B-tree node size / Volume check failed", although the SMART status says verified. I can format the drive and it passes Verify Drive and Repair Drive fine.
Although at this point I'm sure none of these specifics are relevant, since it's impossible for it to be the HD. Is it possible there's some underlying problem internally that's causing my iBook to incorrectly handle a hard drive?

Sorry to be the bearer of such sad news. You might especially review the post by spudnuty in that thread, as it does mention the possibility of a soldering failure which could possibly be repaired by a specialist. I have no idea if this is feasible or what it might cost, but when my logic board had problems, I sent it off for a $75 reball and it came back and has been working perfectly ever since. Here's where I sent it.
http://www.superiorreball.com/
If you really love this computer, it may be worth a call to Dale at Superior and ask if this is something that is fixable and what it might cost.
The other alternative is just to plan to boot from an external drive, which does not involve the ATA bus used for the internal drive. This is likely worth doing as it's always good to have a spare computer, even if it isn't quite as portable as it used to be.
Happy Computing!

IBook blueberry Battery Problem since Upgrading from 10.3 to 10.3.9

Hi, although I read through the tons of posts regarding this subject, the offerred solutions did not help.
I reseted the PMU, I tried running Battery Reset under 9.2, I recalibrated the BatteryManager so far I could, I drowned the Battery - still: The Battery has 0% and is "charging". but the iBook does not work running only on battery.
Is this software related, so that I have to go back to something earlier than 10.3.9?
The battery is fine and working when used under 9.2 and 10.3. Is it impossible to use 10.3.9?
Thanks for your help!!!
MacBook Pro 15,4 2GHz Mac OS X (10.4.7) almost new

Hi Sue, Are you using the iMac install disc on your iBook? The firmware on the iBook is different and will not be reconized. Did you migrate your iBook to your iMac? I can run a clone of my iMac on my iBook with no problems via firewire. So I think it is possible to do a restore from your iMac to your iBook and upgrade that way...But make a back up just in case!!!!
Glynn

Uncooperative iBook G4 install

To make a long story short, I bought a refurb iBook G$ that came with no install disks, and no Admin password. Not (then) knowing how to change the Admin password, I elected to buy the 2-DVD Replacement iBook G4 install disks directly from Apple Care. When I tried to install, everything went fine until the iBook ejected the first disc and asked for the second. EVERY time I tried inserting the 2nd disc, I would immediately get an error message telling me I had to try the install from square one. Did that five times, with various buttons pushed and much cursing, with no joy. I asked some questions in the iBook G4 Discussion forum, got some good information but not quite enough. Now I have a System Install dilemma. Please read on/
I found this Apple Support document (http://support.apple.com/kb/TA24615) entitled:
<< Mac OS X 10.4: Repeatedly asked to insert Install DVD Disc 2 during installation...
cutting out a lot of unnecessary verbiage, here are the important points:
If the issue persists, use another Disc 2. If another Disc 2 is not available, you can complete the installation of Mac OS X with just Disc 1; follow these steps:
1. Hold your Mac's power button until it turns off.
2. With Disc 1 in hand, press the power button and immediately insert it and hold the C key until you see the Apple logo. Your Mac should start from Disc 1.
3. Once started from Disc 1, start the installation process again.
4. When the "Easy Install on 'Macintosh HD'" window appears, click the Customize button. (If your destination volume is not named "Macintosh HD", a different name will appear.)
5. Uncheck (deselect) the item "Bundled Software". You may need to click it twice to deselect it.
6. Click the "Install" or "Upgrade" button to begin the installation. Disc 2, which contains additional bundled software, should not be needed for this installation. At the end of the installation you will have a functional Mac to use.
I also unchecked the "Language Translations," "Printer Drivers," and "Additional Fonts" . I should have been smart enough to uncheck "Bundled Software" in the first place.
At any rate, I went ahead with the install, and everything went as it should have done -- almost. When I got to the "Setup Assistant" pane, I started up my PBG4 in Target mode, had a slight glitch when the iBook didn't recognize the connection, reseated the FireWire plugs at both ends, tried again, and it started to transfer info (I unchecked "user accounts" and "files and folders," hoping to transfer just network and other settings, and applications, since my one-disk install didn't include iTunes, etc.). The Setup Assistant pane SEEMED to be OK, and started tranferring information, but the thermometer bar has been stuck at "about 30 minutes to go" for 2 hours now. So I'm still not out of the woods.
So HERE'S the problem: if this Setup Assitant information transfer is still stuck at "30 minutes to go" a couple hours from now, I'm going to need to shut it down, but as there's no "Back" or "Stop" button on the Setup Assistant pane, I don't know how to do it safely. Can someone tell me how to do this or direct me to a pertinent Apple document?
If anyone has any hot tips in the meantime -- like, does anyone think it would help to just get the basic "One-Disc Install" System up, forget the "Setup Assistant," let the system open to the finder and then get all the updates, and THEN do Migration Assistant instead of Setup Assistant? -- I'd be most appreciative for any help
Hot tip: don't buy refurb Apple computers from Computer Surplus, no matter HOW good the price looks.
Thanks for your time!
Bart Brown

By my usual process of throwing enough manure against the wall, I have somehow backed into grabbing victory from the jaws of defeat.
To make a long story as short as I can, I have followed many of the suggestions here and on the OS X 10.4 Discussion Installation & Setup forum, and I've apparently succeeded in producing a stable, fully functional iBook G4:
After having the problem with disc 2, I let the iBook stew all Saturday night running a 35-pass security erase, which REALLY erased the disk, and the successful completion of which yesterday morning gave what I hoped was a pretty good indication that the drive read/write heads and other HD mechanisms were working without problem.
I ran a non-"bundled software" install, which required only the first disk. When I got to Setup Assistant, I put one of my PBG4s into FireWire Target Mode, and connected the other end of the FW cable to the iBook.
As previously related: "The Setup Assistant pane SEEMED to be OK, and started tranferring information, but the thermometer bar has been stuck at "about 30 minutes to go" for 2 hours now..."
After a total of 5 hours of Setup Assistant still reading "transferring information," and the thermometer bar STILL stuck at "about 30 minutes to go," and no answer if there was a safe way to shut down the process, I said what the **** and shut down the Target Mode PBG4, disconnected the FireWire cable, and worked my way through the rest of the Install steps to completion and restart.
Upon restart, I opened the iBook's drive and read the Setup Assistant's error log: it turned out that Setup Assistant migration had transferred absolutely everything I specified except some RealPlayer components, which hardly broke my heart.
Since Install Disc DVD 1 was still in the iBook's optical drive, I option-booted to the Apple Hardware test and ran the extended version -- no problems encountered.
After I re-started from that, I ran Software Update, and wandered off to contemplate my navel while the quite large updates slowly (Comcast on a Sunday night) worked their way onto my HD.
Finished updates, ran Maintenance (permissions, etc.), which I do as a totemic warding off of evil spirits after every major update. Restarted, in a fit of OCD, booting into Apple Hardware Test, ran extended test again. No problems.
Set up my wife's account, put in the Airport network password, and it hooked up immediately, as did Safari (anyone who still runs a PC should see just this operation alone -- connecting immediately to the net, and not worrying if you have enough virus protection to protect your system for the first 11 nanoseconds you're online -- it would create more converts than a thousand Apple Guy - PC Guy ads)
Ran full maintenance suite from ICE Clean! v2.5 for OS X 10.4 ("...a powerful System Maintenance and Optimization Tool using only UNIX built-in System Tasks," says the blurb). I also use Titanium's "Maintenance" and "Onyx," because I'm anal-retentive.
After all that rannygazoo, I sat down and ran some apps, went online and dug around in my usual haunts (including here).
Bottom Line: Everything works so far. I can't find any glitches (yet), and the iBook has passed every test I've run on it.
My sincere thanks to everyone who contributed to solving this problem. Without the help here, the iBook would be sitting on the bottom of the pond across the street.
BTW, there seems to be some confusion about where I acquired this iBook. eBay was in no way involved. I bought it directly from Surplus Computer online. When I got it I found they had provided NO Admin password and NO install disks. To rectify that situation requires (according to their tech support) that you return the iBook to them, and they supposedly "change" and give you the new Admin password, charging a $25.00 tech fee to do so, and send the iBook back to you, ALL postage both ways at customer expense. Does that sound like a scam to anyone else? BBBOnline of San Jose, CA thinks so, and I'll be sending the details of this transaction to them posthaste.
On the other hand, now that I know how (and have the install discs) to get past this deceitful practice, $329 for a working (eventually!) 12" iBook G4 isn't a bad deal. Working on my 27" iMac, I thought the 12" iBook would require an electron microscope, but it's not a bad size at all, and definitely compact.
Anyway, thanks again.
Here's a greenie!

OS 9 Install problem on imac G3

hello all,
i have an OS install problem on my imac . I just finished formatting the drive . the drive is
paritioned :
1st partition = HD1: 5.5 Gb
2nd partition = HD2 : 2.5 Gb
3rd partition = HD3 : 110+ Gb
Then, in order to save some time ( i thought ) , i tried directly install os 9 from an imac
DV CD , on HD1 : i thought i d be quicker so i would have to start with os 8.5 then upgrade to 8.6 and etc .
that turned out to be a bad idea. the system install warned me it couldnt install Air port because the hardware wasnt compatible . it gave me two options : either ignore this message or quit . i chose ignore : again certainly a bad choice .
After the install was finished , the mac wouldnt start on HD1 . the sytem install is apparently incomplete ,or anycase it doesnt work .
i then installed os 8.5 from original imac tray load install CD on HD2 , and it works fine .
now the question is : what should i do with my bad os9 system ? i need an operating system on this partition. perhaps i can trash it and reinstall mac os8.5 on it ? i hope there is a way to get out of this without formatting the drive again .
thanks for any advice .

about the os9 CD : it is a retail verson , only not of the same imac model .
That is not a retail version of OS 9. A retail version of OS 9 has no dependencies on any model of Mac. You have a machine specific disc which probably won't work with your iMac.
1/ i dont know how to reformat a partition without formatting the entire drive . perhaps you can explain .
In OS X you use Disk Utility and only select the partition that you want to reformat. It has been ages since I used OS 8 so I'm not sure if it is even possible using "Drive Setup".

Nano install problems. Works on USB 1.1!

Twelve months ago I went through the getting an IPOD to install properly problems with my son's IPOD, on his all singing all dancing new PC. Only finally resolved this by installing via the firewire port rather than USB. Therefore it was with some trepidation that I recently got a Nano for my wife's birthday, but hey I thought someone like Apple would have got their act together in the interim and installing should be straight forward. Have they? NO! Tried installing the Nano on my aging Pentium III which has a USB 2.0 PCI card, and for which all other devices plugged into it worked OK. Couldn't even get Windows to properly recognise it "A problem occurred during harware install your device may not be working properly". Tried Apple's suggestions and other users suggestions all to no avail. Firewire install option is not a possibility with Nano, but finally thought why not try one of the USB 1.1 ports on my aging computer, and guess what it installed first time and works without any problems. Transfer rate is not to bad either 850 songs in 1hr 10min. The only slightly different thing I did (which some other users also say) is not to re-boot the computer at the end of installation when it prompts you to and start using Itunes straight away and do some downloading then re-boot later.
Not much comfort to users with newer PC's but if you have an older computer with a USB 1.1 port and have install problems, try it as it may work for you as well.
Like every one else with install problems on PC's I say "come on Apple" individually or together with Microsoft please get this sorted out. My view of Apple was that they have great products (still true) that are easy to use (still true) and install without problems (patently not true).
Pentium III 800 Windows XP

Gosh, I have tried this many times. Over several days. I have also reset the shuffle, which as far as I can tell, consists of turning it on and then off.
Last night, it started updating the music via the keyboard USB 1.1, which I know takes forever. Then it lost communications and quit.

Logic Studio Install Problems

Purchased Logic Studio a couple weeks ago. The first set I recieved would not install correctly and it errored out several times regardless of how I went about installing it. Contacted Apple Support and they indicated I may have a bad set of disks so I returned my set and recieved a new set yesterday. Install problems continue but now different. Orginal set woudl load a coiuple of disks then error out. This set will laod the install disk then when asked to insert the Audio Content 1 disk the computer will spin th edisk around a few times the spit it out. Tried several times and even tried inserting other content disks. I've read some of the conent here and some mention a possibel bad DVD Drive but I do no think my DVD Drive is the problem since after trying the Logic Studio set I successfully installed FrameForge.
When I attempted to install the first set of disks last week I was able to select all the options, SoundTrack Pro, Mainstage, etc. On this set my SoundTrack Pro option is grayed out and I cannot select it to load. I read here last week, when the first set would not load, to remove everything associated with Logic Studio and try again, which I did. Is it possible there are remneants remaining somewhere on my system that is disallowing the SoundTrack install this time?
My system config is:
Processor: 3.4 GHz Intel Core i7
Memory: 16GB 1333 MHz DDR3
Graphics: AMD Radeon HD 6970M 2048MB
Software: Mac OSX Lion 10.7.5 (11G63b)
1TB Internal SATA Disk (This is the drive I am attempting to load on)
256GB Flash Storage
12TB (RAID 5 Configure to 6TB) Pegasus External
This evening I will call Apple Support again, but any advice from the audience is much appreciated.
Signed: Frustrated but Determined

Purchased Logic Studio a couple weeks ago. The first set I recieved would not install correctly and it errored out several times regardless of how I went about installing it. Contacted Apple Support and they indicated I may have a bad set of disks so I returned my set and recieved a new set yesterday. Install problems continue but now different. Orginal set woudl load a coiuple of disks then error out. This set will laod the install disk then when asked to insert the Audio Content 1 disk the computer will spin th edisk around a few times the spit it out. Tried several times and even tried inserting other content disks. I've read some of the conent here and some mention a possibel bad DVD Drive but I do no think my DVD Drive is the problem since after trying the Logic Studio set I successfully installed FrameForge.
When I attempted to install the first set of disks last week I was able to select all the options, SoundTrack Pro, Mainstage, etc. On this set my SoundTrack Pro option is grayed out and I cannot select it to load. I read here last week, when the first set would not load, to remove everything associated with Logic Studio and try again, which I did. Is it possible there are remneants remaining somewhere on my system that is disallowing the SoundTrack install this time?
My system config is:
Processor: 3.4 GHz Intel Core i7
Memory: 16GB 1333 MHz DDR3
Graphics: AMD Radeon HD 6970M 2048MB
Software: Mac OSX Lion 10.7.5 (11G63b)
1TB Internal SATA Disk (This is the drive I am attempting to load on)
256GB Flash Storage
12TB (RAID 5 Configure to 6TB) Pegasus External
This evening I will call Apple Support again, but any advice from the audience is much appreciated.
Signed: Frustrated but Determined

Another Install Problem (With Log Files)

Hey there.
I've read many of the install problem threads and have tried numerous things to get this working, but to no avail. This is getting VERY frustrating.. :-E
Machine is a Dell Latitude with 1Gb mem, Running XP Pro SP2.
My login ID is dgault.
I've set my temp directories (temp and tmp) both to point to c:\temp
Hera are my log files:
====================================
XE.bat.log -- START
====================================
Instance created.
====================================
XE.bat.log -- END
====================================
====================================
CloneRmanRestore.log -- START
====================================
SQL> startup nomount pfile="C:\oraclexe\app\oracle\product\10.2.0\server\config\scripts\init.ora";
ORA-24324: service handle not initialized
ORA-24323: value not allowed
ORA-28547: connection to server failed, probable Oracle Net admin error
SQL> @C:\oraclexe\app\oracle\product\10.2.0\server\config\scripts\rmanRestoreDatafiles.sql;
SQL> set echo off;
ERROR:
ORA-03114: not connected to ORACLE
ERROR:
ORA-03114: not connected to ORACLE
ERROR:
ORA-03114: not connected to ORACLE
ERROR:
ORA-28547: connection to server failed, probable Oracle Net admin error
SQL> spool C:\oraclexe\app\oracle\product\10.2.0\server\config\log\cloneDBCreation.log
====================================
CloneRmanRestore.log -- END
====================================
====================================
CloneDBCreation.log -- START
====================================
SQL> Create controlfile reuse set database "XE"
2 MAXINSTANCES 8
3 MAXLOGHISTORY 1
4 MAXLOGFILES 16
5 MAXLOGMEMBERS 3
6 MAXDATAFILES 100
7 Datafile
8 'C:\oraclexe\oradata\XE\system.dbf',
9 'C:\oraclexe\oradata\XE\undo.dbf',
10 'C:\oraclexe\oradata\XE\sysaux.dbf',
11 'C:\oraclexe\oradata\XE\users.dbf'
12 LOGFILE GROUP 1 ('C:\oraclexe\oradata\XE\log1.dbf') SIZE 51200K,
13 GROUP 2 ('C:\oraclexe\oradata\XE\log2.dbf') SIZE 51200K,
14 GROUP 3 ('C:\oraclexe\oradata\XE\log3.dbf') SIZE 51200K RESETLOGS;
SP2-0640: Not connected
SQL> exec dbms_backup_restore.zerodbid(0);
SP2-0640: Not connected
SP2-0641: "EXECUTE" requires connection to server
SQL> shutdown immediate;
ORA-24324: service handle not initialized
ORA-24323: value not allowed
ORA-28547: connection to server failed, probable Oracle Net admin error
SQL> startup nomount pfile="C:\oraclexe\app\oracle\product\10.2.0\server\config\scripts\initXETemp.ora";
ORA-24324: service handle not initialized
ORA-01041: internal error. hostdef extension doesn't exist
SQL> Create controlfile reuse set database "XE"
2 MAXINSTANCES 8
3 MAXLOGHISTORY 1
4 MAXLOGFILES 16
5 MAXLOGMEMBERS 3
6 MAXDATAFILES 100
7 Datafile
8 'C:\oraclexe\oradata\XE\system.dbf',
9 'C:\oraclexe\oradata\XE\undo.dbf',
10 'C:\oraclexe\oradata\XE\sysaux.dbf',
11 'C:\oraclexe\oradata\XE\users.dbf'
12 LOGFILE GROUP 1 ('C:\oraclexe\oradata\XE\log1.dbf') SIZE 51200K,
13 GROUP 2 ('C:\oraclexe\oradata\XE\log2.dbf') SIZE 51200K,
14 GROUP 3 ('C:\oraclexe\oradata\XE\log3.dbf') SIZE 51200K RESETLOGS;
SP2-0640: Not connected
SQL> alter system enable restricted session;
SP2-0640: Not connected
SQL> alter database "XE" open resetlogs;
SP2-0640: Not connected
SQL> alter database rename global_name to "XE";
SP2-0640: Not connected
SQL> ALTER TABLESPACE TEMP ADD TEMPFILE 'C:\oraclexe\oradata\XE\temp.dbf' SIZE 20480K REUSE AUTOEXTEND ON NEXT 640K MAXSIZE UNLIMITED;
SP2-0640: Not connected
SQL> select tablespace_name from dba_tablespaces where tablespace_name='USERS';
SP2-0640: Not connected
SQL> select sid, program, serial#, username from v$session;
SP2-0640: Not connected
SQL> alter user sys identified by "&&sysPassword";
SP2-0640: Not connected
SQL> alter user system identified by "&&systemPassword";
SP2-0640: Not connected
SQL> alter system disable restricted session;
SP2-0640: Not connected
SQL> @C:\oraclexe\app\oracle\product\10.2.0\server\config\scripts\postScripts.sql
SQL> connect "SYS"/"&&sysPassword" as SYSDBA
ERROR:
ORA-28547: connection to server failed, probable Oracle Net admin error
SQL> set echo on
SQL> spool C:\oraclexe\app\oracle\product\10.2.0\server\config\log\postScripts.log
====================================
CloneDBCreation.log -- END
====================================
====================================
postScripts.log -- START
====================================
SQL> @C:\oraclexe\app\oracle\product\10.2.0\server\rdbms\admin\dbmssml.sql;
SP2-0310: unable to open file "C:\oraclexe\app\oracle\product\10.2.0\server\rdbms\admin\dbmssml.sql"
SQL> @C:\oraclexe\app\oracle\product\10.2.0\server\rdbms\admin\dbmsclr.plb;
SQL> DROP PUBLIC DATABASE LINK DBMS_CLRDBLINK;
SP2-0640: Not connected
SQL> CREATE PUBLIC DATABASE LINK DBMS_CLRDBLINK USING 'ORACLR_CONNECTION_DATA';
SP2-0640: Not connected
SQL> CREATE OR REPLACE LIBRARY ORACLECLR_LIB wrapped
2 a000000
3 1
4 abcd
5 abcd
6 abcd
7 abcd
8 abcd
9 abcd
10 abcd
11 abcd
12 abcd
13 abcd
14 abcd
15 abcd
16 abcd
17 abcd
18 abcd
19 16
20 51 8d
21 LSqVp2u3D6yxyD42bHCkpHL03/8wg04I9Z7AdBjDpSjA9TNSMjO9GP4I9Qm4dCtp6jfnlRLO
22 EXUFAGLlV0fbBvBjoirfWNdXU3VV0WYkgIWTZhXOjnGHQ2VzowkkIKuoKmprxsHwQ=
23
24 /
SP2-0640: Not connected
SQL> DROP TYPE DBMS_CLRParamTable;
SP2-0640: Not connected
SQL> DROP TYPE DBMS_CLRType;
SP2-0640: Not connected
SQL> CREATE OR REPLACE TYPE DBMS_CLRType wrapped
2 a000000
3 1
4 abcd
5 abcd
6 abcd
7 abcd
8 abcd
9 abcd
10 abcd
11 abcd
12 abcd
13 abcd
14 abcd
15 abcd
16 abcd
17 abcd
18 abcd
19 d
20 4be 207
21 3WAupYEFJyUtDT58GzFPeWkUS6wwgwKJr0hqynRAv7leuFljpGFIgxvNNkagWXCAOYNjnLy1
22 ulbIGu/7Jr4I+E4ghHw/fZT2AjJ43oXGRL90ldDxQSra1CPcaBsAtcpUa02tik8fNqx/KMgr
23 633l8+Va2DhCmvZXp9G7vbOPt7Pl3MM9zMw2e9Y0okY53GpiRO894C9geS1Y7KzzE/IgLaEu
24 32gKwpBN6M0RCm7BYQ+ovzICzvY5VVyfs/mJp4oYS98qQpcbag5dyZAf0OP/aKDRu8nMxkFb
25 i/etbPODbix+jSyOsHVw8+Q+m5vbJnoYgrAEVyEgB3LQctJbF95qK2fWuM+PzvFnTTxAGGzD
26 bbFaBpyXAP09LtZsxHxeICUOFvBRezKHmWrTb5DRlika6Lg9ukf6Rh9Vb+74Kw+dCaqdPNsm
27 BbgD7N+pj3pEKfdUH3CrGeQtEflPW7LZ5wEdk1k/oTs5nee7t70+LOfUmSdFznr3wK/OVfn4
28 KShfwfMR
29
30 /
SP2-0640: Not connected
SQL> CREATE OR REPLACE TYPE BODY DBMS_CLRType wrapped
2 a000000
3 1
4 abcd
5 abcd
6 abcd
7 abcd
8 abcd
9 abcd
10 abcd
11 abcd
12 abcd
13 abcd
14 abcd
15 abcd
16 abcd
17 abcd
18 abcd
19 e
20 41f 191
21 WGxKHaEucYlWwCTtmi+GiJKjekYwgwK3ctxqfHQHrbs+zza9qFIBBo/k3vRdV42GdJcBu7Vv
22 ITu0l2CDDI1d+D9K6+h7yxxZwO9Xtk4x8RFMvTqmcLYXjeAqvfUCO0DbqqDG+0SG03B8N8zU
23 x3CB7ZzBJqbdVlPKP72aumnr8weouKrQT4tmBg3nhDN3+4ve7JkpJVEIEI+T5dJDg3IF2nEb
24 xv03mcyUhyCvDbOazgEBY+LaQTQ99WwuW3WZw4y5xOakbH7mnBiomlFxUQglR1Hft6tRchhS
25 tJTSEuprYV4kbm7IcRmC1LRlilvfcjDmMRWJUyC8NDvKu45v5GiDxx268uhVJTkhTBGaNgPz
26 idKIcZk/6eV4Myw05MkyijGkKIEIpR3Fl0SO
27
28 /
SP2-0640: Not connected
SQL> CREATE OR REPLACE TYPE DBMS_CLRParamTable AS TABLE OF DBMS_CLRType;
2 /
SP2-0640: Not connected
SQL> CREATE OR REPLACE PACKAGE DBMS_CLR wrapped
2 a000000
3 1
4 abcd
5 abcd
6 abcd
7 abcd
8 abcd
9 abcd
10 abcd
11 abcd
12 abcd
13 abcd
14 abcd
15 abcd
16 abcd
17 abcd
18 abcd
19 9
20 3162 65e
21 igQsRO8he8CDCdDl4nWpC6D62Xcwgz0T2UgFey9AmP9euDHhTNtIIypFDhpSVolmshjyUX7k
22 SDMhxRY91oYjSjLiIwWaV61R3iM8yqEjBdxa/QqeVR3pZs7ue/BsPqTYpXW8XRTJmbmDO5
23 y6g6sM26+9djcF+m6Fqq8mC6NyZn6S5/u5YqlKUW6Z0/jFVzc+7lxa51jAi2w83JxUetuepc
24 Egxc0uEGzxAtwztimeUcybwG552DvNxfbRYPmlZcF9ms5bun8tEOU37kSxAxwg78sGNmXyJg
25 Jp+fefVhVk3C9oZaBEqX7v/i8BgyRDcEjUz9lIky1qFGl+LwK6UjnlZNwvaMFeGiVd1F/AUF
26 mHTk3md05YqDaT+DTqV8W1zC30fR3VfRvaLGYXiY3Q7FSir0QtQzyR8EXCMAYA3EXEaUFpex
27 HwxcYAocVlx+EIrX0XzluGgiDXiY3Q4l/lmPizTlkrkJ9LGUPSicGFqTaYHrCe0hotIXVND2
28 F7HUVK9cmOiDrcMQA+iDHp686BzH3ZSlKjFqVM6JTMPDsiJPMkNbw/6M6OgXOuH2yHO9AMlb
29 OziQdfrmRltzw9EUNffiMMtRhoLdqYs1e2XMMqCVgGctzFg7P2tU+kbANpabiyUIvhhaAu7a
30 xyvmPVJnmysL4u823iZM2GqZiZCpKW3Qv4NbJpkxn9LDl13NZ651CmCRtTHYpzbEOxcukq0t
31 lwO08hc0bwA3SconEG/mRIBo82vHgSlwIZu7C4AMzIIYYHFCc85MYN2EANfivUZrD486W1F/
32 gR3t490htjoHcFdVf1DiPqkXdtb79WooM4LoLHkw8U+qpiF2NYvSl6lJgb7BVdDiI3dux9EI
33 z61yE26Ss4Fd8U7cZM56fUJJ7aWLcdeAiNbVenhTe3KFBHHuOq+tP/9upKGieCQXcjKNfxCw
34 +1WK69iQf7XbU9OsMBAoNQ7Bo27SJLPVjEvTtkKuNfMrly1CbKAe9AzUNy5bE5S593CX54xc
35 Vw68Qij7gam+GE04w25o+7JJ3oiAgi8jYYbYD2zZxIWMz4MmrVq3eE390NbSHyo7jwHegxKK
36 f3h+yaUTftrGMN6jT2lokTEy1KiyE7MSEwHBtNF5y79IE8xyVuVpIMIMc0DE/TJ0uJ7SOfLE
37 6SqgfhRxYRnsuAM1/GFNB7fwRPx19omV1+MCt2mBmwWKreim3q4NJgWKrexOr0FoZGET9buf
38 RaRVyXcxl/K3Xu/C19hkaqBibbH9eQf9JAWUOtDPAvh/ThmIIy15+VGDFNmummh9SXftWiSE
39 D0vX9JgmaYFFgfMECrWS664SELEFQKBDY2tyhUXo5a0E6EMyi2X4B+aqeJszH5WuDGcKF+d/
40 7NklyocS0C9rvMWyDj1qV73XI6vfmBdSFS55SOx3O5uzoKk4Vw3sFlLVkwyA3w2fuV/6PcOI
41 mayz9ZGxGT3tryZDopGviZT6Zd+BJdzRDexA9vz6kHEnKqSxtLQws8Nbtzm7e+9X7kd2yDnN
42 zdju2xPRoVlXR/M41DFx8QRY5B1OfryhhCITa25oua0+Yrt8bQJCmke63jDNWP+92nHIEU+e
43 eWu1mrm9oOz5JJXuag+ENbhu
44
45 /
SP2-0640: Not connected
SQL> show errors
SP2-0640: Not connected
SP2-0641: "SHOW ERRORS" requires connection to server
SQL> CREATE OR REPLACE PACKAGE BODY DBMS_CLR wrapped
2 a000000
3 1
4 abcd
5 abcd
6 abcd
7 abcd
8 abcd
9 abcd
10 abcd
11 abcd
12 abcd
13 abcd
14 abcd
15 abcd
16 abcd
17 abcd
18 abcd
19 b
20 933d 1c32
21 LjzBBzQRtLt3jlDfh/c2/PSd1T8wg1VMr0iGl8DXM4HqbvrJkWfzixk0XWxmoBbxAb73ueCM
22 RRbLF4Q2NZ+TRL3Ilc/PFpNhoqGGvhwPEl1/yYy50S2Sbuvp5ZgYt02SeKOCl+i5zJx/KFxp
23 aZ/LBLWh73oUCRg8SdRqDz1a39OEKQKgLDQEZJMtce5ef+zwT5ZUAAEz+DyK3yH1r6W9A6po
24 7D0uukDHeE98+B48WYNUwiLGik+f6u8SGxS1NCqCLEJ2L+t3M70DnS5Hitkt7rbJtWV/mbaY
25 SUf5MnL9HkDmkEmHIjgzBbALmCL5OJiaYZ89pClOS+R5SYmyKWzrsIqf8r3w2E9C7RImcZ/S
26 PpiQK13CjK4xzdtRdwDHc+QzxAc6TEsQl0hJnMUhQ4JSOrEScdGrIg3/vyM+IHMCRPgaVdyW
27 QwNz5BCwH3l7DyS7I9rtz0o42vmIMPki/JV51sHtvfA3KX/YHCrw73K6F3iVIvxALReJLslq
28 D2EfaNl9/jEPJM3UfluFv4B9udP9PIr9vlcV2XlOnFshHFvkM/i7mPMqWyxzU8ItLAPNQXOf
29 A4H5hrHQlWGBGTicoCZTSI2zFvC3BnJxDdSCxCqMbq2nax8YekAYxpnXgFXwEMHX983iJnIF
30 Ts5j/DsoNO5LzewGJJpMeW6xn6Ne2e99xjPoDZmlcmt+O5e/QFVwJD6lwfP9a0v4ds8mjJb+
31 TsGz4AS6uQe5G5v+16q1EoEPtde1/k+1CJ21Tk+qqpq2WjzNMzO6zSKfGblhBsIIE7+ymAqb
32 MI16BXhySREcqDBfg70JTltZSlJ1cGVlgN8YkeGv19z6B50dxsR+PZCbg8GzKuIseoOH4GHG
33 7m409J5hUCL1Vd3BVQAUxMTEvJs0EDBpnYiE2+zEFupuYf95bFiJPPfLee+BGcmafJCGLD/4
34 0tCd8E4WgA8BmMWC0GgEn+5JSeJhv+LJ/IM73/OOFbgktiRFUFUIKzGQXww4iT+5ToDIdyhu
35 KNqYlEroIub+fYYzRYZ4hc58Kl8oKCFo380RfgvrSpFsTzq665o/s1fOvdttC8nl2uL5zX+j
36 185OV4CGkhWj+1w8JQJcoLCMpHOhJrOzIxHTmh6G0MhSs7gMlSS167uqAIsVmgaznSgKW6rc
37 cL7OeQVtIMwIxBIw6OtBZtN10ktKYbeY/o9XopbUaXifH/4P3w0WGyUsHblz0zGydaQrKbm5
38 uPuL+L7kLd3CHT9fH2jwpJiWzwQyJDsIOVO/EGURdMaGsPq0MYyuTsYzlfeGgDuMxcSGZmNd
39 Ae2Z5FdOIy3wMgkfsM0Dhn/EhwNVilWtwCOZ/I7E4CNytJpiHP2fSz/VyH740Zp4YQCaUzJ+
40 mLzH/rRqJPREB7oGsJCfsFkiwbz5TZIkBNqwCMC/KbYppPMw5P3NIUaGXUrk1sTQ7uT5UsAK
41 V9C/11OnxpR4TLP4lBLyOrTPBfINmWUokO9/KHkkofP+XnoQR5jAkHqojfq7m09jiZAHEpGA
42 ePrJmr0Whow8Un6YMdwLLGA/WTKAFYNg/oLuzTOo4vIj2tCHXjDvPmQEUdzfnxlkm5+2Qvcz
43 G4NFjoG5vwPi8hD+0e2x+IYpM4/4XJpzWYcUnSZF0Sm7P7rSe9K/u9kymbsmSQO3pIv+CjT4
44 WDRaQl5MTAkZQXceyBnWs5iUmjE8Tvhcmj/FlvGa9FPRYLwK0w40KEQi83M/qESXT6g1Oh2r
45 NBxzeWIZCtI/lDHtVMCaskLqjrsZA49dnL31ltDAmrJSaz5kFNvwQTQFL3itnqrGqEhuxtnm
46 aPdu0QdTCrMTNBev+mRRV0ItXV0S7AVDxHH6bxk8jf7lvrd6a/4KvlWihxq+9BrRJ7knFXE6
47 SoxxOm02vptjf+Lk3OMF6K+HB2hhQTQFA73CD4aR4G7G2f9sSl31oUgFRzweyAU8t/7FxN75
48 TviNBZ8clvEFLW68bHhjuRiOeCNOQVx4+vKqmhX9sJvgzaTeHvHknzr8sai8n8HZEo0ZoQa1
49 +JQZSGaW8VWiXpyiFygqhLGoNIC/GQozijQGHnP8u1JlliWPWNtBd2sQvt9suZ4hYSwIY/M/
50 /hV64rLkRBreD/l2Uhz1/hp6ao38giE9YUoGnMzezpWRq/lWkECwAiMWi+3LWCLO1uwjVAMN
51 9l1VIpOHxY0/sYiB+DEaHxs8T1q5PjgzCJdGMYIpK1gt939KvMc4HLEGnao4Mwiu84s1wJxG
52 vpb+vMtcuZBCZGV61ZCqnatorkPp4Xr3PKHege67z9V9o5+omgg5XZbCOs4l8MYp6Ib3dzyG
53 gkO8Gkhf980Qc825jJzsJIZCjfeaVg8/FodBp9EsJo+4+qSHPaB1cxowCKVibcY8kFidAB63
54 30Z58Dqw788cxVnmtKsAibcse8sPUhZ4aEp7RApXNZtNWsHG3XriYSNiVnL2URnL/6GU6xyz
55 XlDcNQB3VXME6ICBt2REKZPwhgWoI3GNU1vSNkteetD8QkG9fVKhPPY1Qod4gZ9U3MWQM3BB
56 UTIYi4tNV49YuEgb6RxkRH2LNNOGzS9VWfJJM8hBNZ/oUB+pxSDW5eTDVENm4ptMcKqOdztV
57 HgY6Tkt6xgjaBuQ4AbwiGJu2bEI10JrzhoTsg8eVznXgzifgeqE2z4R/HAn+HNtXNSlxXyTn
58 UTQiGJtOcInHdkPeyiihRXIQhXpdVJ1vyBdYUCBbXVK5mxyFthr/qeQ1Nadk4sabsPotel4L
59 OhoELILFT/TuqP0zPT/aQV3YvO6WxoSnKWq71L3ysAQi6L0itmqEGMH2ODDs4zqfBBxj3Ll/
60 blH1vWoH8LAsNwhSBaUqa3oxjxK6ISgFwICp3MraldLIR4FZotC3CIeZcgOJvsSETlf6edBD
61 vcOwWoMUYilYEYMhaooNpg0MQnAgW+WQkUjNN+2paHivVUlW5Hw0nCXoh6TN3jyFrt34f9eG
62 jggLV530Qs5eZ511mdL8UAdPShDOG87uPtKuJcpB9HNevdFkMBbAqLJDLnJg6PTvB+/xghSd
63 AjP5frWAs7zIDQiDEa7H1RkczcZ+47ag0Pd66fjOjvhYaa4J84eZBZm9HSBbitLjqtD8iOCV
64 ldaSzV6X0ADKnZIDCK4S0SISGyIQHEE0zPjueoGpaEi0rcD+ZOsZ8E3tmwD7+Qa1HUsy7xmd
65 65LTHSTh+DEMYa7cGrA/19BMMGc6MMCIJbTLLn4PG6plCvOS6O0HQ93d6fGn+LX1W5z/2CxD
66 wlv5dWHWX0qHuxDlO/j5Zx8Ziu2qZP6zBTBJ2ByQKT8TtPg16tQeOinOKswSRh79S9oQwX1G
67 j2qITsQ6VfC+ZSNy3Pxk9FUdTSBnuV0y1LZI0Eo0lsgSmhIBoEEXsnG2ZICpvPst6/4N3HVV
68 dqQvDw6fTs4sYXGUvhNOjDP24P4Ed3gOv4IQ/UP1Qz8HcL4JQEOXPqd4i1RBZjo+rMQQ6tTN
69 Kk6Sp24/ErMivuBkyMy+/GOS6B7SBW3S7qn+JWak+OJ590Fu8A89ZhCpm2JvKbMKA9xvKbZG
70 l5RlxbFZJjRssJsuCSgmVpw/20jaZF93A1kO9maBqYv9yHtCJgaJd0lvJ0IQHqA0BgGjvO7F
71 Yp0NWizrz9Glvs2YYXNqt3QmCoMAz6mbYjPLKDqjXiIsXkrRpb7NmGUirgMN4vRygBaaqXKG
72 sbmQCDq4FU6y8mt31+6mFAlFq6MyI+anWj48h75lqrJHxTL0iWan1RQJGP2eYh/LcCYIsLcK
73 d2wJGALHoRMYHiuIWM3IAirHptM+lbICp+4s8SWLuKbTPpWD1eqL/TcfiYda+K9tCOwyuaZU
74 T1cJ8oc8pawlmd4kMH+HAxndF1vnv1xpHraM0Qsc5Q48SdFx+vaWyy+55Q48SdTARO7LMohO
75 aUQNIghZE0jsladaPjyHvmWahXY8SUqJ8ZyBLu6mqm2i8lKEawHOdN50JUCm8av0ieDNjdVO
76 8I9qni729IlmikqV+6m46kQNIghm9wmJ3zZW6s7DV6YvueUOPLCGenhW6loajniOo9F23Qlq
77 mm/LWhqO8Jfdmfl+VjLuqaLys010egwajvCX3W1nMUhLcTVTCqyjT1O4ViplE9+QZLY+lRW+
78 Gi6VMgpfz+zh38em0z6VsgKn7kSL7xeMdYu4ptM+lYPV6ov9Nx+Jh1r4r20I7DK5plRPVwny
79 hzylrCWZ3iQwf4cDGd0XW+e/XGketozRCxzlDjxJ0XH69pbLL7nlDjxJ1MBE7ssyiE5pRA0i
80 CEfPXX4h100MGo72ZHFYIJHLHraA8vrZkui4qZ3pZmNTa1Blz0AhOd6EpqHwovItM5eNOmCl
81 OALoDaLy85/GBqZnUwqso08w91o+8v3hp9XPxXam579caR62lkeA/2B/bAkYVOLIWj5IFqBx
82 V6ljQJ1idshaPquNNx/kMVT8Ffv0iVHMiDCnWj6rjTcfN8JVcL6suOpEDSJS7lQnkd9O9wPM
83 WfSJ4O5xJegGRVxgyYIsrf2VB0cDWB3IWj5IFqB0lnwsrf2V65HtrXapovItM5eNOmCPRGMf
84 JT+l4DTJkNqmPElKifGcKjQO0uaDKIdfsdh4pTH7FUyUd5LbTdl1B8VNgfSZ6puDbR1GmMVN
85 gfQtcTVThEzUesM1O656giyt/ZUh13wMGo72ZHFYIJHLHraA8vrZkui4qZ3pZmNTa1Blz0Ah
86 Od6EpqHwovItM5eNOmClOALoDaLy85/GBqZnUwqso08w91o+8v3hp9XPxXam579caR62lkeA
87 /2B/MZyi8vPZlNM+lbICp5lbS3elxAId0z7pjGWlrCT9DExXyvcJIcUdctM+6YxlpWZpYf1W
88 6i+55Q48SdF2DPBHySLA3xj6vBQJGALHoRMYHiuIWNfPXX6OXkuW9IkGR/taGo54jqNAH3XQ
89 bvDg5sHNy2smFt3Pkc/eRsG4ptM+lYPV6ov9Nx+Jh1r4r20I7DK5plRPVwnyhzylrCWZ3iQw
90 f4cDGd0XW+e/XGketozRCxzlDjxJ0XH69pbLL7nlDjxJ1MBE7ssyiE5pRA0iCEfPXX6OXkuW
91 hGZjERAGrdM+lYPV6ov9WGqS2/cJm8K8PnaPIPdaPkgWoHRPqPA1gy9nCe/3CdjtwAG8889U
92 a95i9wlGVS1Xpi+55Q48SYcUCRglQKlDnk+eW6YVTJR3ktuZTvcDzFmvvBQJGFTiyFo+SBag
93 cVepY0CdYnbIWj6rjTcf5DFU/BX79IlRzIgwp1o+q403HzfCVXC+rLjqRA0iUu5UJ5HfTvcD
94 zFmvvBQJGALHoRMYHiuIWNdtpLBD13apovJShGsBMDcfC1Vp3RT0UstbyvcJ2O3AAbzzMDUp
95 AqAsNARkk8HLqYH072NdAbKWFu3IM9Yfhioess+fqbjqRA0if/xli2ueJxAGFY00Mwam7uKe
96 JxDgVuovuWmcfyhcaR62cjQEHkDmkAei8rOS28cUCRgN6uJHeGUHgfTvY10BEF5X3Zpm9wlo
97 aRGIIoSr1qCoqRpgZmNUEkOXz+/OS+bro2Zj55gLUqbKaFw1O640WhqOY7L72ZQilMumRpjF
98 TYEpVpbT2ZTTPpWyAqeZW0t3pcQCHdM+6Yxlpawk/QxMV8r3CSHFHXLTPumMZaVmaWH9Vuov
99 ueUOPEnRdgzwR4uVVHiO/G5aPm//bHnF4roBkd+W1EVrUMai8lKLphQJGP2eYmqZNAQeQNzT
100 xcG4ptM+lYPV6ov9Nx+Jh1r4r20I7DK5plRPVwnyhzylrCWZ3iQwf4cDGd0XW+e/XGketozR
101 CxzlDjxJ0XH69pbLL7nlDjxJ1MBE7ssyiE5pRA0iCEdtLUgWWYJ8tj6Vg9Xqi/1YapLb9wmb
102 wrw+do8g91o+SBagdE+o8DWDL2cJ7/cJ2O3AAbzzz1Rr3mL3CUZVLVemL7nlDjxJhxQJGCVA
103 qUOeT55bphVMlHeS25mW1EVrUMai8vPZlNM+lbICp5lbS3elxAId0z7pjGWlrCT9DExXyvcJ
104 IcUdctM+6YxlpWZpYf1W6i+55Q48SdF2DPBHi5VUeI6SdVo+b/9secXiugFd3quGR/taGo54
105 jqNAqlm5bmr7WhqO9mRxWCA2h2kjqM1bltT2PL4dcBAGWj5Ck2qZ8pYac4+VMNcjHU+kymhc
106 NTuuX0VfQk2so09TuGxk7VdnUwqso08E2ZRG2ncBR4SUd5LbA3J/VE8wWhqOO656gGZjVBJD
107 l8/vx1RPVwnyhzx4Ah3kYtM+lbICp+6CGn9a/eFaJxQJGA3q4kd4rCjVITtsCRhL2m9bphVM
108 lHeS222i8syDL0tx7l7upmdTCqyjT+g6UVTiyFo+SBagcVepY0CdYnbIWj6rjTcf5DFU/BX7
109 9IlRzIgwp1o+q403HzfCVXC+rLjqRA0iUu5UJ5Fhcn9UT1f3CVZux/+twW7H0d5eUlXF7wM+
110 MvSJBkf7WhqOeI6jQB8WMsdXpvSJ4M2N1U7w3Znylhpzj5Uw13u/ptiudj5slvYwNSkCoCw0
111 BGSTII8DHUaYxU2B9MycfyhcaR62H+JdDR9b579caR62C76suAdFX0JNrKNPMOh3svSJUYH0
112 wVoajvZkcVggkcsetoDy+tmS6LipnelmY1NrUGXPQCE53oSmofCi8i0zl406YKU4AugNovLz
113 n8YGpmdTCqyjTzD3Wj7y/eGn1c/Fdqbnv1xpHraWiUWi8vPZlNM+lbICp5lbS3elxAId0z7p
114 jGWlrCT9DExXyvcJIcUdctM+6YxlpWZpYf1W6i+55Q48SdF2DPBH6HdsCRgCx/++8bGHdsit
115 uAG0aRGIh9g3RnrDvxpYsqamaCe29/g0yMgH7F/yl3oUCRh+2EL4KxYBFAkYftgK0NObaVX3
116 CQHYWM0L7qlHN9VqQObZpeCyFF015dolRzmm3Tvf875ymb1CTfpNGkeEZmOF1OyzVS1l0z7p
117 3zw9gL1CyPxK9U25WiZlPEczLbhni92NOIRrATAtOdObDjKITks417zzaCe29/g0yMgH7F/y
118 l3oUCRh+2IhVpNXv9wmRC0wQichbO9l1B7L2M/DPVm4dFF04+IfRVurIyFs72XUHsvYz8I8e
119 6nd2z9LUGGQPqKgoPaTeyR28P+nXr4Ag2M6SlNObyj2k3snVbgsmbZ34qj5s6s0=
120
121 /
SP2-0640: Not connected
SQL> show errors
SP2-0640: Not connected
SP2-0641: "SHOW ERRORS" requires connection to server
SQL> CREATE OR REPLACE PUBLIC SYNONYM DBMS_CLR FOR DBMS_CLR;
SP2-0640: Not connected
SQL> DECLARE
2 ORCL_HOME_DIR VARCHAR2(1024);
3 BEGIN
4 DBMS_SYSTEM.GET_ENV('ORACLE_HOME', ORCL_HOME_DIR);
5 EXECUTE IMMEDIATE 'CREATE OR REPLACE DIRECTORY ORACLECLRDIR AS ''' || ORCL_HOME_DIR || '\bin\clr''';
6 END;
7 /
SP2-0640: Not connected
SQL> show errors
SP2-0640: Not connected
SP2-0641: "SHOW ERRORS" requires connection to server
SQL> @C:\oraclexe\app\oracle\product\10.2.0\server\rdbms\admin\patch\patch_4659228.sql;
SQL> set echo off
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
...wwv_flow_help
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0641: "SHOW ERRORS" requires connection to server
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
timing for: Load Start
Elapsed: 00:00:00.00
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0641: "EXECUTE" requires connection to server
SP2-0640: Not connected
ERROR:
ORA-28547: connection to server failed, probable Oracle Net admin error
SP2-0640: Not connected
SP2-0641: "EXECUTE" requires connection to server
SP2-0640: Not connected
====================================
postScripts.log -- END
====================================
====================================
PostDBCreation.log -- START
====================================
SQL> connect "SYS"/"&&sysPassword" as SYSDBA
ERROR:
ORA-28547: connection to server failed, probable Oracle Net admin error
SQL> set echo on
SQL> //create or replace directory DB_BACKUPS as 'C:\oraclexe\app\oracle\flash_recovery_area';
SP2-0640: Not connected
SQL> begin
2 dbms_xdb.sethttpport('8080');
3 dbms_xdb.setftpport('0');
4 end;
5 /
SP2-0640: Not connected
SQL> create spfile='C:\oraclexe\app\oracle\product\10.2.0\server\dbs/spfileXE.ora' FROM pfile='C:\oraclexe\app\oracle\product\10.2.0\server\config\scripts\init.ora';
SP2-0640: Not connected
SQL> shutdown immediate;
ORA-24324: service handle not initialized
ORA-24323: value not allowed
ORA-28547: connection to server failed, probable Oracle Net admin error
SQL> connect "SYS"/"&&sysPassword" as SYSDBA
ERROR:
ORA-28547: connection to server failed, probable Oracle Net admin error
SQL> startup ;
ORA-24324: service handle not initialized
ORA-01041: internal error. hostdef extension doesn't exist
SQL> select 'utl_recomp_begin: ' || to_char(sysdate, 'HH:MI:SS') from dual;
SP2-0640: Not connected
SQL> execute utl_recomp.recomp_serial();
SP2-0640: Not connected
SP2-0641: "EXECUTE" requires connection to server
SQL> select 'utl_recomp_end: ' || to_char(sysdate, 'HH:MI:SS') from dual;
SP2-0640: Not connected
SQL> alter user hr password expire account lock;
SP2-0640: Not connected
SQL> alter user ctxsys password expire account lock;
SP2-0640: Not connected
SQL> alter user outln password expire account lock;
SP2-0640: Not connected
SQL> spool off;
====================================
PostDBCreation.log -- END
====================================

There were no CORE*.LOG files.. So here are the other two..
============================
alert_xe.log START
============================
Dump file c:\oraclexe\app\oracle\admin\xe\bdump\alert_xe.log
Wed Nov 09 10:52:59 2005
ORACLE V10.2.0.1.0 - Beta vsnsta=1
vsnsql=14 vsnxtr=3
Windows XP Version V5.1 Service Pack 2
CPU : 1 - type 586
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:596M/1023M, Ph+PgF:2167M/2459M, VA:1936M/2047M
Wed Nov 09 10:52:59 2005
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Shared memory segment for instance monitoring created
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_1 parameter default value as C:\oraclexe\app\oracle\product\10.2.0\server\RDBMS
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
sga_target = 285212672
control_files = C:\ORACLEXE\ORADATA\XE\CONTROL.DBF
compatible = 10.2.0.1.0
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers = 4
local_listener = (ADDRESS=(PROTOCOL=TCP)(HOST=DGAULT.hotsos.com)(PORT=1521))
job_queue_processes = 4
audit_file_dest = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\ADUMP
background_dump_dest = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\BDUMP
user_dump_dest = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\UDUMP
core_dump_dest = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\CDUMP
db_name = XE
open_cursors = 300
pga_aggregate_target = 94371840
PMON started with pid=2, OS id=2948
PSP0 started with pid=3, OS id=3468
MMAN started with pid=4, OS id=3600
DBW0 started with pid=5, OS id=3148
LGWR started with pid=6, OS id=4028
CKPT started with pid=7, OS id=2588
SMON started with pid=8, OS id=3868
RECO started with pid=9, OS id=124
CJQ0 started with pid=10, OS id=1892
MMON started with pid=11, OS id=1732
Wed Nov 09 10:53:08 2005
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
MMNL started with pid=12, OS id=2344
Wed Nov 09 10:53:08 2005
starting up 4 shared server(s) ...
Oracle Data Guard is not available in this edition of Oracle.
============================
alert_xe.log END
============================
============================
xe_ora_3500.trc START (11:04 AM)
============================
Dump file c:\oraclexe\app\oracle\admin\xe\udump\xe_ora_3500.trc
Wed Nov 09 11:04:54 2005
ORACLE V10.2.0.1.0 - Beta vsnsta=1
vsnsql=14 vsnxtr=3
Oracle Database 10g Express Edition Release 10.2.0.1.0 - Beta
Windows XP Version V5.1 Service Pack 2
CPU : 1 - type 586
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:598M/1023M, Ph+PgF:1863M/2459M, VA:1617M/2047M
Instance name: xe
Redo thread mounted by this instance: 0 <none>
Oracle process number: 0
Windows thread id: 3500, image: ORACLE.EXE (SHAD)
opiino: Attach failed! error=-1 ifvp=0000000
============================
xe_ora_3500.trc END
============================
Message was edited by:
Doug Gault

Solaris 8 Install Problem - Partition(s)

First, I am a relative "newbie" when it comes to SUN Solaris and System Adminstration, though I know enough UNIX to be dangerous (read "get me into trouble" - hahaha).
I tried to do an "upgrade" to the O/S (2.7) on my Ultra 5, but when doing an "initial install", the system will only allow me to set the partitions/slices manually at the cylinder level. Any attempts to do so have failed, as I keep getting an "overlapping cylinder" error message, regardless of how I try to setup root, /usr, etc. The Solaris 8 O/S setup swap as follows:
Starting - 3275 Size - 1110
FYI, I was trying to do the install using the Solaris 8 CDROM, Solaris build date 2/02.
Overall, I appear to be having a lot of issues with the Seagate Medalist ST34321A (4.1 Gbyte) drive that came with my Sun Ultra 5. The drive appears to work correctly, but an attempts to "wipe out" the drive (reformat) have not met with success.
Any suggestions anyone can provide regarding the install problem would be appreciated.

If you are trying to Upgrade to Sol 8 it is strongly suggested that you do not use the Installation CD. Use CD 1 of 2 with a boot cdrom. You will have to answer the sysid questions and then should get prompted for Initial Install or Upgrade. If you do not get the Upgrade prompt then there is a problem with your original Sol 7 system. Things like nfs mounts in vfstab, links to /var/sadm/patch, pkg or install/contents.
An Upgrade should not be asking you to lay out filesystems. It should use your existing ones.

Solaris 10 install problem (requested image to big to fit into memory)

I have just downloaded the iso images and burned to disk. When I go to install I get the message (Requested image to big to fit into memory Error 28) I have 1.5GB so I don't understand the problem. Thanks in advance
It took a long time for me to figure out, but the answer is disable in BIOS memory hole at 15M to 16M. This solved the install problem with Open Solaris and quite a few more such as not being able to install Linux Zenwalk 5.0 or openSUSE 10.3. Their are others also problems I have had with Linux or UNIX that this took care of. JGZ
Edited by: jgz on Mar 8, 2008 9:13 PM

Hi,
I had been able to solve the Error 28 issue that in my case was really related to a corrupted boot image:
1. I went in the path /a/platform/i86pc
2. rm boot_archive.
3. sync
4. reboot
At this point the OS will notice the absence of the boot_image and it will regenerate it.
At the time of this operation the CD with solaris 10 was inserted in the CDROM.
When the system restarted it was able to load the OS properly.
Please use these information at your own risk. I do not accept any liablity.
Cheers

Install problem Error with Z drive

Our IT guys configure our machines with a Z drive as a network share. Any ideas how to resolve the conflict with PE9 install.
Thanks
David

I did not pick the Z drive for install. I always pick the C drive if given the option. But PE9 just went to work on its own and told me it could not install to the Z drive... there is a known issue posted here along these lines, however, so I think Adobe is on to it... of course i had to install as a trial version on a second machine to test the disk burning...then I have to solve the install problem, so I can install the license on the machine with the install problem.... all a big catch 22. Here's the link on the install issue... I get the 1327 invalid drive error:
http://kb2.adobe.com/cps/404/kb404946.html
Thanks
David

Adobe Story free application install problem

I have been using Adobe Story Free version for a year but with the most recent automatic update (Dec 2012) the desktop application will not open. Upon clicking the icon for Adobe Story it attempts to take an update but stops with the following message:
" Sorry, an error has occurred. This application cannot be installed because this installer has been mis-configured. Please contact the application author for assistance."
Does anyone know how to fix this?

Sandeep, Thank you! Adobe Story is okay now.
Date: Sat, 29 Dec 2012 10:58:48 -0700
From: [email protected]
To: [email protected]
Subject: Adobe Story free application install problem
    Re: Adobe Story free application install problem
    created by [email protected] in Adobe Story - View the full discussion
Hi, Please uninstall the current Adobe story application and then install latest from https://story.adobe.com/AIR/AdobeStory.air . That should fix it. Thanks,Sandeep
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4953552#4953552
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4953552#4953552
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4953552#4953552. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Adobe Story by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Adobe captivate installing problem

Title: Adobe captivate installing problem
Question: I have purchased a Adobe Captivate 4 license and I have downloaded the setup file from adobe site and installed in a x86 windows XP machine which is joined in a windows 2003 server ADS.At first I installed as trial version once installed I provided the key after all a windows will come up with asking the license agreement I click accept but Nothing will happen nothing will run in the system, also I cant uninstall when clicking uninstall nothing is happen .I have tried installing by creating a folder under the program files as adobe2 then I can start the program but after a while or afte many time but this doesn't help .I have the same problem in other machines too. can any one help me?r a day it will again as the license agreement windows and I selected accept then the same problem I have tried reinstalling

How does this relate to GoLive?
Did you intend to post here?...
http://forums.adobe.com/community/adobe_captivate

Install problem - SAP Crystal Dashboard Design, departmental edition

I download a departmental edition trial version and I tried install it.
When finish a message said the installing was fine but then apears another message "Missing installdir reg key for installinverse, required for uninstall.
Key: SOFTWARE\SAP BusinessObjects\Suite XI 4.0\Installer\aurora
Value: Path"
Then another message saying a Runtime Error.
I have a windows 7 ultimate 64 based with a 2010 SP1 Office 32 edition.
Thanks in advance
Rui
Edited by: SuperRato on Jun 28, 2011 2:53 PM
Edited by: SuperRato on Jun 30, 2011 10:19 AM
Edited by: SuperRato on Jun 30, 2011 10:22 AM

Hi,
Please look to it:
http://scn.sap.com/thread/3261354Re: Install problem - SAP Crystal Dashboard Design, departmental edition
Put your attention on my last comment on security updates to C++ libraries - don't install them.
Best regards,
Denis

Install problem- Solution Manager4.0 /Oracle10.2.0.2 / Solaris 10

Kindly look into this link
Install problem- Solution Manager4.0 /Oracle10.2.0.2 / Solaris 10
Ashraf.

Kindly look into this link
Install problem- Solution Manager4.0 /Oracle10.2.0.2 / Solaris 10
Ashraf.

IBook OS Install problems

Similar Messages

Maybe you are looking for