IBook user - should I go for the mbp?

Ok, I have a 12inch iBook G4 800mhz, 640mb ram. Before people start badmouthing my little baby you sould all know this was my first mac and it was this that made me see the light
Ok so you know my setup. I am at college studying multimedia. For this I use apps such as photoshop, dreamweaver, illustrator and I am starting video next year and would obviosuly be using a video app such as Final Cut. I am only in my first year so its nothing too heavey, but at the same time my iBook is really starting to show its age and next year I have no doubts it will not be able to keep up.
What would you guys recommend? Taking the plunge and getting the Macbook Pro or possibly wait and see what the Macbook has to offer? Im really tempted to go for the pro as it would surely last longer with it being a pro machine. The powerbook 15inch is still an option but once again if im going to fork out £1500 on a laptop on a students budget I want it to last. Does the MBP seem the right choice, or maybe a bit over specced for what I am doing and the MB (when announced) may look a better deal.
Thanks in advance for your comments.

well thats the thing really, money. I am in the market for a new laptop and either way (MB or MBP) I will most probably have to pay through finanicing. If I am to do this over a 2-3 year period it would surely make more sense to go for the mbp right? Am I correct in thinking a pro machine should have a longer lifespan?
I could probably save up and buy a MB (supposing they keep the current ibook prices) but having just passed my driving test and paying for insurance on a car I think financing is the way to go.

Similar Messages

TS2756 iam using iphone 4S with win 7 PC and i cannot connect to the internet through my phone but i tried with my other 4S and it works but what should i do for the first iphone 4S???

iam using iphone 4S with win 7 PC and i cannot connect to the internet through my phone but i tried with my other 4S and it works but what should i do for the first iphone 4S???
as i said i have two iphone 4S,,,,,
1st one --- has os 5.1
2nd one has os 6.0
i tried 2nd one with carrier reliance gsm nd it works with that personal hotspot setting using USB...
but i want to connect the first 4S with carrier TATA DOCOMO GSM but its not working with the same USB feature????
plz reply asap...!!!
thnxxx in advance!!!

If not this:
iOS: Wi-Fi or Bluetooth settings grayed out or dim
One user reported that placing the iPod in the freezer fixed the problem.
Also heating sometimes works. See:
Why can't I select my wifi settings?
A trick that works frequently with iPhones:
Settings > AirPlane Mode ON, Do Not Disturb ON
Power down and wait 5-10 minutes
Power up
Settings > AirPlane Mode OFF, Do Not Disturb OFF
If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
Apple Retail Store - Genius Bar
Then:
Does the iOS device connect to other networks? See other networks? If yes that tends to indicate a problem with your network.
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Replacing my HDD in my Early 2011 Macbook Pro...Trying to decide between Samsung 840 EVO 250 gb and Crucial M500 240 gb. Samsung is faster but less "mac-friendly". Should I opt for the Crucial due to the "mac-friendliness"?

I have a S.M.A.R.T error on my current Hitachi drive that came with me Early 2011 Macbook pro. Want to upgrade to SSD.
Trying to decide between Samsung 840 EVO 250gb and Crucial M500 240gb, at this gb range, the Samsung is faster and uses less wattage....ONE PROBLEM...I have read many user experiences that note it is much less mac-friendly...
The software samsung offers is not IOS compatible and some report lower than expected speeds after installation...Also apparently the RAPID MODE of the drive, the fastest drive mode is nonexistant when installed on a Macbook pro?
Should I opt for the slower and more power cosuming Crucial M500 240gb SSD because it is more Mac-friendly? Does anyone have a Samsung 840 EVO 250 gb SSD installed in their macbook pro? What has been your experience?
Thanks ahead of time!
Resoure: http://www.tomshardware.com/reviews/crucial-m500-1tb-ssd,3551.html

I decided against the Evo as there are too many Mac users that have had issues with slow speed on them. Even without these, the main speed that Samsung states for the Evo comes form turbo Write which is a PC only feature as is software dependent.
I'm sorry but Crucials M500 is simply too slow compared to modern drives to be recomended. Read speed is ok, but the write is far too slow for the price.
I've used and installed both a Samsung 840 basic and a Samsung 840 Pro in 2 separate Mac books! and currently have the 840 Pro in my own MacBook Pro and it comes very highly recomended. It's all but the fastest Sata III drive you can buy - A few OCZ drives just edge it but the difference is negligible. Samsung by far have the best reliability though when it comes to SSD's. I've been getting 520Mb/s easily on mine consistently, and without getting a MacBook with a PCIe drive you won't get a faster more reliable drive.
I really would recommend nothing else.

2.0 or should I spring for the extra .16? Please help

Hi all,
am currently using a G5 2.3 DP tower and am thinking of jumping to a MBP. My questions is will the 2.0 be enough of should I spring for the 2.16 and will I see/feel the difference.
Does anyone have an idea also on how much of a difference there will be in speed between my G5 and the MBPs?
I intend to max out the ram at 2Gb and keep the standard 5400 rpm drives for now.
Will use it for MS office, Java, iLife and web based design.
Thank you all for any advice and input.
chris

Hi All and thanks to all who replied. It is greatly appreciated and has been very helpful.
Here is the update.
I initially ordered a 2.0BTO with a 7200rpm drive. First one arrived and was DOA - it had a really loud shreeking (not a whine but a loud shreeking) sound when turned on and and was very unstable with random KPs. Called Applecare and ran a HW test that detected a MoBo error so back it went.
Second unit arrived and after a couple of days was also declared DOA as it would not charge consistantly and screen flickered.
Ended up cancelling the BTO order and went to my local reseller who had a 2.0 5400rpm Hd in stock. Told him the issues I had so he suggested we open one up and test it to make sure it was ok and I was happy with it before I paid for it. I agreed and eventually left with my new 2.0 100Mb 5400rpm 2gig ram MBP.
It's been a week since I brought it home and all is well. A couple of observations I have made after 3 MPBs are:
1. I actually feel that the units did have different heat levels when running. This is very unscientific as one had a faulty MoBo and one had charging issues but the one I have now is warm, but has never reached the level of being uncomfortable even when running it flat out.
2. 3 different MBPs with 3 different quality of builds. The first one was flawless, perfect and fit. Second one had a slightly misaliged screen that lifted at one corner. Third one is pretty good but the first one was the best.
3. The Whine - I don't want to comment on this as there has been enough said and written bout this but I do want to say that in my opinion, if you listen hard enough to anything that is mechinical, high performance with active moving parts and high speed processors you will hear some sounds. As long as it is not obtrusive, counter-productive or distracting or drawing attention to itself, I am ok with it.
4. I think the week of build does not assure you of the quality of MBP. It is a hit and miss thing if you end up with one that is less than fully functional. The first BTO was a wk 13 the second was a wk 15 and the one I am happy with is a wk 14. A friend has a 1.83 wk 10 machine that is perfect as well while one of her friends has a wk 11 and has not had any issues. Funny thing is the shop owner I bough it from said there have been people coming in and asking what week the MBP was and not staying when they found out it wasn't the latest production week.
Anyway, I hope this has been useful info and again, a big thank you to all who replied and gave their input and suggestions. Greatly Appreciated
Cheers

On Ibooks Author, my programmed image for the Chapter page no longer shows up on new pages, just appears as a question mark inside a box, How do I fix this?

On Ibooks Author, my programmed image for the Chapter page no longer shows up on new pages, just appears as a question mark inside a box, How do I fix this? Please help, its the same when I try and copy and paste the same image within Ibooks author.

https://discussions.apple.com/message/24420017#24420017
You may have moved or removed content on your page or its possible you used the"Adjust Image" and over sharpeed one or more images.
I assume you mean it does not show up of new Chapter pages... have you checked the template?
Where you see the ? you need to either reduce teh box outline size - or drop anther copy of the original image onto it, it may fill the ? box or sit on top.... delete the ? box.
If its Chapter page only related, its better doing this in the template.
Is you image .jpg or .png?

This is a workaround for the MBP wireless issue

There have been many topics on the MBP wireless issues already, but I thought some people might find this workaround helpful.
Firstly, my system is a 2.2Ghz MBP, running 10.4.10, and also airport extreme update 2007-04. I am using an airport express base station. My previous Powerbook never had any wireless problems, so I really couldn't blame the basestation for the MBPs poor wireless.
Warning - The workaround requires a little bit of work in the terminal. A little bit of understanding of how networks work is assumed here as well. So it is probably not for everyone ...
What I have observed - whenever the MBP loses connection, the airport basestation IP and MAC addresses are missing from the ARP table.
- To view the ARP table, type (in a terminal window) arp -a.
So, when the MBP wireless hangs, open up the terminal and type that in.
Do a Cntrl-C if the arp command is hanging and not returning anything.
In normal situations, a list of IP addresses and MAC addresses will show up.
As others have already noted, clicking on the airport icon in the menubar, will magically bring the wireless back to life. When this happens, the ARP table also gets magically populated correctly. Coincidence? I think not!
So, the workaround is to store a PERMANENT entry in the ARP table for the airport basestation IP and MAC address. In my case, I can use the Airport Utility software to confirm what the basestation IP and MAC addresses are (note MAC address = Airport ID in Airport Utility). I found the basestation IP=10.0.1.1 and the MAC=0:11:24:07:d7:f
To create a permanent ARP table entry for my airport basestation, I opened up a terminal window, and did the following -
1) login to my administrator account
2) type in the following command sudo arp -s 10.0.1.1 0:11:24:7:d7:f
3) type in my administrator password to authorise the change
4) type in (to confirm the changes have been made) arp -a
5) logout of my administrator account (from the terminal)
Ever since I did this, my MBP wireless performance has been flawless.
Note, if you shutdown or restart your computer, the arp entry disappears. This is ok for me as I hardly ever power down my MBP. As insurance I have added an account startup item to remind me to do the arp table entry.
This workaround is great for me because I don't have a need to use multiple wireless networks. It might not be practical for people who roam around onto different networks.
Give it a go and see if it works for you.
Message was edited by: michael louey

OK, after some further experimenting, I changed the multicast rate on my airport express. It was set at 6Mbps, and I changed it to 2Mbps.
I have read that the default multicast rate for previous 802.11g versions of Airport basestations is actually 2mbps. Excellent results so far !! I have set up a terminal command to continuously ping my airport router address every 15 sec, and there have been virtually no dropped packets so far over many hours.
ping -i 15 10.0.1.1
Interestingly, in Apple's Airport Admin software in my MBP there is no option to set the rate at less than 6Mbps (!!!!), so I had to use the Windows XP version of Airport admin software to make this change using a windows machine. Using the XP software you can set the muticast rate as low as 1Mbps.
If you are using Apples airport admin software (Tiger and Leopard) and you commit any sort of change in settings, the multicast rate will be re-set at a minimum of 6Mbps. My understanding of the multicast rate is that setting it too high is similar to shrinking the coverage area of the basestation, and limiting access only to clients who can transmit at the required multicast rate.
So my new theory is that the dropouts are caused by the MBP dropping off the airport due to not being able to achieve the set multicast rate. (this could be due to factors such as low signal strength, excessive interference or noise).
If you are using Apples more recent Airport admin software, you are having a minimum 6mbps muticast rate set, and this might be too high for your particular environment.
Just a theory.
(oh yeah, I enabled interference robustness on the MBP and the basestation just for good measure)

I have an iPod touch 2nd generation. thinking of upgrading so should I go for the latest iPod touch or for the iPad mini?

I have an ipod touch 2nd generation. I am thinking of upgrading so should I go for the latest ipod touch or for the ipad mini?

It all depends upon your uses and preferences. The iPod had a bigger screen and is physically bigger and has an option cellular radio.

Shared Services Console - User is not authorized for the action

Hi,
I have installed Essbase 11.11.3 and configured on Linux. I started EPM and then the Shared Services Console. I created a new group Poweruser and assigned a new user to it. I provisioned the group withall the rights of the admin. This all works.
When I log on with the new user on the Shared Service Console and go to Essbase Studio Server and click on the Essbase Studio Server application it gives me the message:
User is not authorized for the action
This is the same message as I get under the user admin. Can anyone tell me what I can possibly do to make it work.
The service for EAS is started properly. The one thing that is not configured is HBR.
Patrick

Hi,
What are you trying to achieve, provision a user for essbase studio ?
EAS is a separate product from Studio.
Cheers
John
http://john-goodwin.blogspot.com/

Apple should do something for the equipment stolen something like block and only activated by key words given to register the device on the apple's website

Apple should do something for the equipment stolen something like block it(them) and only activated by key words given to register the device on the apple's website

Tell Apple:
http://www.apple.com/feedback
Doubtful that this would happen. Privacy laws would likely be tested with this.
No manufacturer does this.

"can the iphone 5 hold 1170 songs and 85 apps or should i go for the 32gb model?"

"can the iphone 5 hold 1170 songs and 85 apps or should i go for the 32gb model?"

I have more music than that and more apps, and I have a 32GB model with about 15GB free, so I would suggest the 32GB.

PIR should not consume for the SubReq

Hi Guru's,
Please help me how to configure the planning strategy for my below requirement.
Currently i am procuring a HALB material thru subcontracting. This HALB is having BOM components. I need to send the BOM components to the vendor for assembly.
The BOM components will be used in some other HALB also. My requirement is, the BOM components should not consume for the subcontracting requirements, it needs to consume for in house production only.
The subcon requirement needs to generate the dependent requirements only, it should consume the PIR.
Currently i am using the planning strategy 70, requirement type VSFB. In this, PIR is consuming for the SubReq.
Please suggest me the suitable planning strategy for this scenario.
Thanks & Regards,
V. Suresh

Suresh,
I am curious why you would not want SubReq. It is also a different kind of dependent requirement. Also it seems yo are supplying the components to your vendor. So it makes sense that your forecast is consumed by dependent requirements so that planning is effective.
If for any reason you do not want to supply components to vendor then it would be best to mark such components as vendor provided. In such cases it would not consume your forecast (PIR). Hope this gives some new perspective.
Thanks,
Ram

User Exits or BAdis' for the Service Order create Transaction

Hi all,
 I need to Replace a field, "Product" in the "Item Details" area of the create Service Order Transaction(CRMD_BUS2000116) with some custom field.
Are there any Exits/BAdi which will help me in doing this..
Thanks in advance
Sethu

Hi Sethu,
The user exits / BADI's for the Transaction(CRMD_BUS2000116 are not avaliable:
The following info from one forum to search user exits / BADI's that you can use: There are multiple ways of searching for BADI.
Finding BADI Using CL_EXITHANDLER=>GET_INSTANCE
Finding BADI Using SQL Trace (TCODE-ST05).
Finding BADI Using Repository Information System (TCODE- SE84).
1. Go to the Transaction, for which we want to find the BADI, take the example of Transaction VD02. Click on System->Status. Double click on the program name. Once inside the program search for CL_EXITHANDLER=>GET_INSTANCE.
Make sure the radio button In main program is checked. A list of all the programs with call to the BADIs will be listed.
The export parameter EXIT_NAME for the method GET_INSTANCE of class CL_EXITHANDLER will have the user exit assigned to it. The changing parameter INSTANCE will have the interface assigned to it. Double click on the method to enter the source code.
Definition of Instance would give you the Interface name.
2. Start transaction ST05 (Performance Analysis).
Set flag field "Buffer trace"
Remark: We need to trace also the buffer calls, because BADI database tables are buffered. (Especially view V_EXT_IMP and V_EXT_ACT)
Push the button "Activate Trace". Start transaction VA02 in a new GUI session. Go back to the Performance trace session.
Push the button "Deactivate Trace".
Push the button "Display Trace".
The popup screen "Set Restrictions for Displaying Trace" appears.
Now, filter the trace on Objects:
V_EXT_IMP
V_EXT_ACT
Push button "Multiple selections" button behind field Objects
Fill: V_EXT_IMP and V_EXT_ACT
All the interface class names of view V_EXT_IMP start with IF_EX_. This is the standard SAP prefix for BADI class interfaces. The BADI name is after the IF_EX_.
So the BADI name of IF_EX_CUSTOMER_ADD_DATA is CUSTOMER_ADD_DATA
3. Go to Maintain Transaction (TCODE- SE93).
Enter the Transaction VD02 for which you want to find BADI.
Click on the Display push buttons.
Get the Package Name. (Package VS in this case)
Go to TCode: SE84->Enhancements->Business Add-inns->Definition
Enter the Package Name and Execute.
Here you get a list of all the Enhancement BADIs for the given package MB.
Also have a look at below report which will list BADIs.
REPORT Z_FIND_USER_EXITS.
TABLES : TSTC,TADIR,MODSAPT,MODACT,TRDIR,TFDIR,ENLFDIR,SXS_ATTRT ,TSTCT.
DATA : JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.
DATA : FIELD1(30).
DATA : V_DEVCLASS LIKE TADIR-DEVCLASS.
PARAMETERS : P_TCODE LIKE TSTC-TCODE,
 P_PGMNA LIKE TSTC-PGMNA .
DATA wa_tadir type tadir.
START-OF-SELECTION.
IF NOT P_TCODE IS INITIAL.
 SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.
ELSEIF NOT P_PGMNA IS INITIAL.
 TSTC-PGMNA = P_PGMNA.
ENDIF.
IF SY-SUBRC EQ 0.
 SELECT SINGLE * FROM TADIR
 WHERE PGMID = 'R3TR'
 AND OBJECT = 'PROG'
 AND OBJ_NAME = TSTC-PGMNA.
 MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
 IF SY-SUBRC NE 0.
 SELECT SINGLE * FROM TRDIR
 WHERE NAME = TSTC-PGMNA.
 IF TRDIR-SUBC EQ 'F'.
 SELECT SINGLE * FROM TFDIR
 WHERE PNAME = TSTC-PGMNA.
 SELECT SINGLE * FROM ENLFDIR
 WHERE FUNCNAME = TFDIR-FUNCNAME.
 SELECT SINGLE * FROM TADIR
 WHERE PGMID = 'R3TR'
 AND OBJECT = 'FUGR'
 AND OBJ_NAME EQ ENLFDIR-AREA.
 MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
 ENDIF.
 ENDIF.
 SELECT * FROM TADIR INTO TABLE JTAB
 WHERE PGMID = 'R3TR'
 AND OBJECT in ('SMOD', 'SXSD')
 AND DEVCLASS = V_DEVCLASS.
 SELECT SINGLE * FROM TSTCT
 WHERE SPRSL EQ SY-LANGU
 AND TCODE EQ P_TCODE.
 FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
 WRITE:/(19) 'Transaction Code - ',
 20(20) P_TCODE,
 45(50) TSTCT-TTEXT.
 SKIP.
 IF NOT JTAB[] IS INITIAL.
 WRITE:/(105) SY-ULINE.
 FORMAT COLOR COL_HEADING INTENSIFIED ON.
Sorting the internal Table
 sort jtab by OBJECT.
 data : wf_txt(60) type c,
 wf_smod type i ,
 wf_badi type i ,
 wf_object2(30) type C.
 clear : wf_smod, wf_badi , wf_object2.
Get the total SMOD.
 LOOP AT JTAB into wa_tadir.
 at first.
 FORMAT COLOR COL_HEADING INTENSIFIED ON.
 WRITE:/1 SY-VLINE,
 2 'Enhancement/ Business Add-in',
 41 SY-VLINE ,
 42 'Description',
 105 SY-VLINE.
 WRITE:/(105) SY-ULINE.
 endat.
 clear wf_txt.
 at new object.
 if wa_tadir-object = 'SMOD'.
 wf_object2 = 'Enhancement' .
 elseif wa_tadir-object = 'SXSD'.
 wf_object2 = ' Business Add-in'.
 endif.
 FORMAT COLOR COL_GROUP INTENSIFIED ON.
 WRITE:/1 SY-VLINE,
 2 wf_object2,
 105 SY-VLINE.
 endat.
 case wa_tadir-object.
 when 'SMOD'.
 wf_smod = wf_smod + 1.
 SELECT SINGLE MODTEXT into wf_txt
 FROM MODSAPT
 WHERE SPRSL = SY-LANGU
 AND NAME = wa_tadir-OBJ_NAME.
 FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
 when 'SXSD'.
For BADis
 wf_badi = wf_badi + 1 .
 select single TEXT into wf_txt
 from SXS_ATTRT
 where sprsl = sy-langu
 and EXIT_NAME = wa_tadir-OBJ_NAME.
 FORMAT COLOR COL_NORMAL INTENSIFIED ON.
 endcase.
 WRITE:/1 SY-VLINE,
 2 wa_tadir-OBJ_NAME hotspot on,
 41 SY-VLINE ,
 42 wf_txt,
 105 SY-VLINE.
 AT END OF object.
 write : /(105) sy-ULINE.
 ENDAT.
 ENDLOOP.
 WRITE:/(105) SY-ULINE.
 SKIP.
 FORMAT COLOR COL_TOTAL INTENSIFIED ON.
 WRITE:/ 'No.of Exits:' , wf_smod.
 WRITE:/ 'No.of BADis:' , wf_badi.
 ELSE.
 FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
 WRITE:/(105) 'No userexits or BADis exist'.
 ENDIF.
ELSE.
 FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
 WRITE:/(105) 'Transaction does not exist'.
ENDIF.
AT LINE-SELECTION.
data : wf_object type tadir-object.
clear wf_object.
GET CURSOR FIELD FIELD1.
CHECK FIELD1(8) EQ 'WA_TADIR'.
read table jtab with key obj_name = sy-lisel+1(20).
move jtab-object to wf_object.
case wf_object.
 when 'SMOD'.
 SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
 CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
 when 'SXSD'.
 SET PARAMETER ID 'EXN' FIELD SY-LISEL+1(20).
 CALL TRANSACTION 'SE18' AND SKIP FIRST SCREEN.
endcase.
Hope it will help you.
Regards,
Arjun
Reward points if it helps

Inspection RR should be allowed for the operation confirmed qty only

Hi Friends
I have one requirement , Inspection results recording should be allowed for the operation confirmed qty only
i.e
    1. Release Production Order for 100 qty
    2. Inspection Lot created for 100 qty
    3. Production Confirmation done for 1st operation for 50 qty
    4. Next operation is testing or Quality inspection
    5. Used 03 insp type(WIP inspection)
    6. Result Recording should be allowed only for 50 Qty
    7. If i go for 51, system should give message(i.e confirmation not done for 51)
    8. Usage decision saved for 50 qty, Remaining 50 qty,we have to do separate RR & UD once confirmation done
Please let me know the settings,
Thanks & Regards
Gajendranath

Hello Gajendra
Please find my inputs
1) PLease activate in OPK4 for the production order type these 3 setting
a) Operation sequence : Error when operation sequence is not followed
b) Overdelivery : Error when overdelivery tolerance is exceeded
c) Results Rec. (QM) : Error message if no insp. result exists
by doing this a) you make the sequence of operation mandatory. no body can confirm operation no 30 without confirming 10 & 20
b) if you have confirmed 50 in the first operation, you cannot confirm more than 50 in second operation
c) it will not allow you to confirm through C011n if the result recording is not done
2) Kindly understand for 03 inspection the lot quantity will be of 100 (PO quantity as in your case). so it is impossible to give UD for 50 quantity and then do the UD for the rest of the quantity.
UD is for the lot and not for the confirmed quantity. And please note for 03 inspection confirmation holds the importance rather than the UD
So use 03 for intend of its use
Regards
Gajesh

The location should be active for the assignment error

Hi All-
I am trying to apply for the job Application: Review Account IRC1548607 using Oracle's online recruiting tool but getting the following error when hit next on the very first screen:
"The location should be active for the assignment error"
Anyone here help me resolve the issue?
Cheers,
Irfan Jaffery

Hi Irfan Jaffery,
Kindly provide the steps which has been performed while applying for the job and provide the exact error message and Error number.
Thanks and Regards,
Joshna.

To make the User group Filed mandatory for the Tcode SU01

Hi Gurus,
I need to make the 'User Group' Filed mandatory for the Tcode 'SU01'.
I know we can do it using Transaction variant.
But i do not want to create a new custom Tcode (e.g ZSU01) for the same.
I understand we have a User Exit 'SUSR0001' for the Tcode SU01.
Can we use this to make the User Group field mandatory.
Or is there is some alternative way to do this ?
Please advice.
Thanks in Advance.
Regards,
Anubhav Mishra

Hi Anubhav Mishra,
> I know we can do it using Transaction variant.
> But i do not want to create a new custom Tcode (e.g ZSU01) for the same.
You don't need to create a custom Tcode to assign a transaction variant, just declare it as being a "standard variant" (in the SHD0 transaction too), and you'll make it assigned automatically to SU01 when this last is started.
BR
Sandra

IBook user - should I go for the mbp?

Similar Messages

Maybe you are looking for