Ibook wifi with usb modem with adsl router

how could you connect the ibook so that it's wireless to the phone line. I'm gonna have to buy all the parts but what's the easiest way to do this ?

To give the iBook G4 wireless the ability to connect to a wireless network, you simply need to install an AirPort Extreme card. The last iBook G4s had wireless built-in.
If you have a ADSL modem without an Ethernet output you will need to replace that modem with a modem that does have an Ethernet output. Then you can buy any inexpensive 802.11b/g compliant wireless router to provide a wireless network for your iBook.

Similar Messages

I try to switch on my WiFi connection at home with ADSL router. Always I get the answer - Wrong password. The pasword used is correct. It works with another hardware.

I try to connect my iPhone with internet through WiFi with ADSL router. My network is visible. When I try to connect it, I write the password and I get always one answer - WRONG PASSWORD. The same password works perfectly with other two computers and other smartphone.

Did you already try to reset your network settings on the phone in Settings/General/Reset/Network settings ?
More Wi-Fi troubleshooting here: http://support.apple.com/kb/TS1398
Message was edited by: Ingo2711

Connecting to Home WiFi with Belkin Router

Hi guys,
love my itouch, just cant get it to connect properly with my router. My settings confirm im connected ok (ive input my password as requested), but when i use safari or try to collect my emails im told my itouch can connect to the server. Do i need to manually input more settings (and if so, what are they....?) When i attach to other routers i have no such problems, straight into safari and straight into my emails....
At a loss, so any help geatfully received!!
Cheers

hello
i may have a solution for you.
Do you have any computers connected to the network?
if so, then what firewall software is installed?
I had the same problem, and it was very annoying. All i did was add every conceivable ip address that my router could give to my ipod into the 'safe ip's' section of my firewall software. It instantly started working.
Give it a try!

I get N wifi with AC router?

I originally had an N-equipped 2nd-gen Airport extreme. I get connection all around my house. I got an Airport Extrene AC router, which I put in my basement, and I moved the old router upstairs.
I have a 2013 MacBook Pro with retina and AC capabilities.
With this setup, I only get AC sometimes, but N the most. I check by clicking alt and the wifi bar on the top of my screen.
How can I get AC all the time throughout my house?

If you have not already done so, use the option to assign a separate name to the 5 GHz network in AirPort Utility, and then make sure that the MacBook Pro connects to that network.
If you don't receive "ac" reliably when the Mac is in the same room as the AirPort Extreme, then either your MacBook Pro or the AirPort Extreme is defective.

Nokia N80 or E65 WiFi With Prolink Router

I already have Nokia n70 and thinking to trade it for either Nokia e65 or Nokia N80 but I still can't made up my mind.........
But my real issue is that if I buy either phones, can I use them for WLAN with my PROLINK HURRICANE 9000W.......This model of router is kind of old already........
Another thing is that,either Nokia e65 or Nokia n80 which one is better.........I'm looking for stable phone (which means it doesn't hang too much),long life battery (3 days or longer),and nice camera photos...........

Should work, router supports basic 802.11b + WPA, not going to be secure (or particularly quick) so won't recommend it for really important stuff. One thing you might want to check is if there is a WiFi cert logo on the router. It wasn't listed on the wifi cert site, but it is possible this is some kind of OEM device.

4g USB modem with Android (wifi only, ICS) tablet?

Will the VZW UML290 4g USB modem work with an Android tablet (obviously without a built-in 4g radio, only wifi)? There is no VZ Access Manager software for Android, would an Android networking app do the trick?

Hi, I have the same question because I want to buy a Transformer Prime. <Content deleted per the Verizon Wireless Terms of Service>
The best that I could find is that you'll do just fine with a MiFi hotspot device and the appropriate Verizon account. Reviews seem to favor the 4510 L over the Samsung MiFi device. If you have an account for the Pantech now, you can upgrade your contract to the MiFi. All of your computers, Android, Mac and Windows will work on the MiFi hotspot because there is no software needed to connect.
Alternatively, you can check out Cradlepoint wireless routers. They offer a boatload of portable WiFi routers that can tether to any number of mobile devices including the Pantech UML290. For the Pantech, you plug it into the Cradlepoint router's USB port and create your own portable hotspot LEGALLY with your Verizon Pantech account. You then connect your Transformer wirelessly to this hotspot bypassing the need to use the VZW interface that is not yet, and may never be, Android compatible.
As for your original post regarding an Android app for the Pantech UML290, I'm certain some 'enterprising' droid devotee is working on it, However, I've not yet found anything on the web yet that provides a viable work around except for the completely legit MiFi from Verizon or a Cradlepoint wireless router.
NB to Verizon support. You should have provided the MiFi information, it's your product for pete's sake.
Good luck!
Message was edited by: Verizon Moderator

Wifi is not available where I come from. I have broadband connection where data transmission is through cell sites then to USB modem connected to a computer. The modem draws power from the computer. Will this setup work with the ipad?

Wifi is not available where I come from. I have broadband connection where data transmission is through cell sites then to USB modem connected to a computer. The modem draws power from the computer. Will this setup work with the ipad?

iPad requires Wifi (or 3G /LTE) to connect to the Internet. You cannot connect a USB modem to the iPad.
You can create your own WiFi hotspot through your computer for your iPad to connect to, if your computer supports this functionality. All Wifi Macs and many Wifi PCs do. Check your computer manual for how to do it.

HT1178 How setup and configure time capsule with ADSL modem for WiFi internet

For my first time time capsule 2TB set up,would like to know about configuration time capsule with ADSL modem for use WiFi internet!

You will want to turn off the WiFi on your modem (if there is WiFi on your modem). Connect the TC and the modem together with an Ethernet cable. Then, turn on your TC and set it up to be in bridged mode, connection type 'Ethernet'.

How do i let my iphone connect to my computer wifi with usb ?

As the title stated,
How do i let my iphone connect to my computer wifi with USB ?
The reason is because my iPhone 3Gs wifi having some problem. So i have to use a USB cable to connect to my computer and let my iphone to connect to the internet .
If i don't do this i would have to keep on running out & in to my room & my living room.
My iPhone 3Gs allows to connect to the wifi when i am in my living room, but once i enter my room the wifi won't be able any more. So please help me out please people
I'm not sure about why i can't connect to my Ad hoc even it's so near, but i can connect to my router if i am in living rooms.
Regards,

I believe the next time you sync your phone to itune via the cord, you will have to check the box that says sync via wifi and also enable that setting on your iphone.

How do I share a 3G USB modem connected to my Macbook Pro with my Airport Express?

Hi. I have a 3g USB modem connected to my macbook pro, and I want to try share the signal with my Airport Express (latest model).
Now before everybody screams that it can't be done, I was searching the forums and found a discussion in which someone describes how to do it from 2008, unfortunately it is archived and I couldn't ask the author directly, and the description doesn't go into much detail.
In the thread, the author describes turning internet sharing on to share the USB modem, creating a network on the macbook, then renaming the Airport Express network name the same as the macbook, and setting the AX to Join a Network.
Problem being there is no description of whether the macbook connected to the AX via ethernet or wifi, what settings were changed on the AX eg bridge mode.
Is this possible in theory, and has anybody had any success sharing a 3g USB modem via a macbook pro to an AX? I know there are other options like getting 3g ethernet modems, unfortunately not an option in this case - new house, waiting for DSL to be installed, 2-3 month wait.
Thanks

Well, you cannot use the 3G USB modem plugged directly into the Express. However, you can configure your MacBook Pro to do 'Internet sharing' (SysPrefs>Sharing) over the Ethernet port, and then connect your Express into the Ethernet port. Alternatively, you could always get your MacBook to 'create a wireless network'.
new house, waiting for DSL to be installed, 2-3 month wait.
You could always look for open WiFi networks to *cough*borrow*cough* .

Can't get my epson sx535wd to work. my epson will get contact with my router (sitcom wl306) and my mac is on wifi, but they can't connect. epson can't find the computer and my report says: there are conflicting channels on my router or entry point. help

can't get my epson sx535wd to work. my epson will get contact with my router (sitcom wl306) and my mac is on wifi, but they can't connect. epson can't find the computer and my report says: there are conflicting channels on my router or entry point. please help

OK, let's try these................
1 - Boot up from your install DVD and run "Repair Disk" from the Utility menu. When done, restart back to your desktop, repair permissions and restart your computer. Re-connect your printer.
2 - Download & install the Gimp drivers. Make sure the one you install is compatible w/your OS-Gutenprint 5.2.8-pre1. Repair permissions, restart your computer & re-connect your printer when done.
The Epson model I have, in order to get it to print wirelessly, I had to install a Gimp driver.
3 - Check out the following KB Articles:
Mac OS X 10.4 Help: Connecting to a network printer
Epson Printer Drivers v2.10 OS X
Adding a printer to your printer list in Mac OS X
Mac OS X 10.4 Help: The printer I'm adding says "Driver not installed"
======================
If still unsuccessful after trying all of the above, the problem could be your iBook or human error. You can either call Epson & ask to speak with a Mac savy supervisor or return the printer & find another that is compatible w/your current OS.

USB modem won't work with Panther

My girlfriend has a black G3 powerbook and uses a Speedtouch 330 USB modem successfully on OS9. However I have also installed Panther 10.3.9 and installed the Speedtouch Panther driver update from their site but when I open the Network preferences panel Speedtouch USB does not come up as an option.
If I go to the list of modems it is there but if I select it it still doesn't work.
In the past I have used a USB modem with my G4 and Panther and after installing the driver it immediately appeared as a new connection option called Speedtouch USB and it worked fine.
I have tried reinstalling the driver several times. I have spoken to Apple and I have spoken to Speedtouch with no result.
I can only assume that it is something to do with the black G3 compatibility.
I have done a test with her powerbook in Panther and plugged in my ethernet router and it works fine.
But these routers are quite expensive and it bugs me... why won't Panther recognise the USB driver?
Any suggestions please ?
thanks
Pete
London, UK

My westell modem is very flakey and will often reset its connection from PPOE to bridge all by itself. From what I read on the web, setting the westell to bridge is the way to go since it allows the router to actually route. But, for me it only works when sent to PPOE. That means that the westell is both a modem and DNS/NAT router so I disabled those capabilities in airport. The verizon dslstart.verizon.com has some help on how to do this. search on westell 6100.

Problem with USB modem

I have just bought a macbook with mac os X tiger. I have a problem with network configuration when I'd like to setup my broadband. I'm now using Tiscali broadband which supplied me a USB modem (Sagem Fast 800). I've already installed the software and driver. The problem appeared when I tried to configured the network setting. I couldn't find "external modem" or "ethernet adaptor" as the manual suggests. As a result, I couldn't make any interent connection. It'd be so grateful if anyone who's using tiscali broadband can kindly give me the solution for this.

Hi,
Thanks a lot for your reply. I've looked in the network port configurations and found "Airport", "Bluetooth", "Biult-in Ethernet" and "Built-in Firewire". All of these are checked but I can't see the "external modem" port. I also rebooted the conputer after installing the software and driver. There is a software "ADSL Monitor" shown up in my desktop but can't see the device in the network configurations.

HUAWEI USB modem with AEBS Networking

Hi All,
I have just got myself a HUAWEI USB modem from 3 Network here in Australia and was hoping to hook it up with my home network (iMac G4, Airport Extreme & AppleTV) as I can’t get ADSL in my area.
I have the iMac G4 connected to the AEBS via ethernet but I’m not sure how to hook up the modem. From what I have read the USB plug on the AEBS hasn’t the drivers for the HUAWE USB modem so the modem is connected to the iMac but this wont share internet connection to the AppleTV.
Has anyone run into this problem and has got a solution?
I plan to buy a new iMac and Time Capsule this year but feel I may still run into the same problems.
Thanks in advance.

I can see this working as follows;
1. Plug the HUAWEI USB modem into your iMac G4
2. Configure internet sharing on the iMac to share the USB Modem connection via the Ethernet port of your iMac (see the following support article for details http://docs.info.apple.com/article.html?path=Mac/10.5/en/8156.html)
3. Run a cable from your iMac to the WAN port of your Airport Extreme
4. Test the internet connection on the AppleTV, if everything is configured properly you should be able to access the internet.
The only caveat here is that you need to have the internet connection up and running for any device on your network to access the internet. If for whatever reason an internet connection is not available (and with a 3G USB modem is does happen as I've found out here in the UK with T-Mobile's USB modem) any application will eventually timeout and give you an "Internet not connected" error.
My experience of 3G Broadband, while on the whole has been very positive, has seen a good 3G internet connection disappear or dramatically slow down on occasions where the only remedy has been to disconnect and re-connect the connection.
Hope this helps,
Regards,
Jason

TC in Bridge Mode with ISP router vs TC as Ethernet with VDSL modem

Hi, I have a time capsule. It's the newest generation of the old shape/design - i.e second to newest version. It's running 7.6.4. firmware.
I recently updgraded my ISP to Fibre VDSL and the ISP sent me a crappy router with a built-in modem that you have to use. I checked the ISP support forums and found plenty of advice to configure the TC over ethernet with this router using the DMZ of the router etc. Anyway, I got it all working but i wasn't happy. port forwarding was a pain and you end up with double NAT issue - not surprising.
The alternative config was to switch the TC to 'bridge mode' so the crappy ISP router does the NAT / DHCP, port forwarding, dpnp, internet routing. I got this all working and i have made sure that all of my network nodes/clients (wired and wifi) are all off the TC and only use the ISP router for internet, dhcp etc. This is all working with good speeds, solid internet access but...
Major issues with airplay (use this a lot) and also with stuff like facetime etc. The connection is much faster (40mbps down/10mbps up) than my old ASDL setup but as I said, key services that I use are not as stable.
I think my only alternative solution is to buy a VDSL modem seperately and use the TC as the router i.e. go back to my old config with TC doing all the routing, port forwarding etc.
Does anyone here have a view as to whether this is worth trying? I'm hoping that it if the TC is doing all the routing, I will get less drop outs and services will work as they should. On the other hand, I hoped airplay would be OK as it's a wifi/Lan service rather than WAN but I have had quite a few issues.
Appreciate any help with this and sorry for the lengthy note!
Jata.

In theory, you will do better by using a simple bridge mode modem and then setting up the Time Capsule as the router to provide DHCP and NAT services.
But, as you might imagine, it is not possible to predict whether your results will actually be better using this type of setup.
Worth a try, in my opinion, if you can find a store that will let you return the modem for credit if it does not do what you want.
Even a simple modem will still likely have to be configured to operate in bridge mode, but the setup should only take a few minutes using the web based configuration interface.
Let us know how things are working if you can, if you decide to the try the simple modem approach.

Ibook wifi with usb modem with adsl router

Similar Messages

Maybe you are looking for