Ibook won't boot, after having DVD stuck

I had a problem ejecting a DVD, as it had crashed. So after restarting, the grey screen appears with the apple, and the laptop did not come back on. I managed to eject the CD by holding the trackpad button, but OS X is still not loading.
Any idea's would be appreciated!

You may have directory corruption, or you may be seeing a hard drive failure occurring.
Apple's Disk Utility, found in your Utility folder, can remedy basic problems in the directory. If a directory problem goes unchecked, it can snowball into a larger problem, which is never pleasant.
To repair directory problems, insert the Installer Tiger DVD into the computer. After it loads, restart the system. When the screen goes dark, hold down the C key. Once the grey Apple screen appears you can let go of the C key.
When the DVD is fully loaded, select Disk Utility in the Utility menu. A window will open showing your HD on the left. Single click on your HD, then select "repair disk" in the lower right of the screen (First Aid Panel). If errors appear during the "repair", rerun the utility until you get a clean pass. Then quit the Utility and Installer, letting the computer restart.
If errors exist and Disk Utility cannot fix them, then a trip to the Apple Store would be next. The alternative would be using a more sophisticated program such as Disk Warrior.
Post back

Similar Messages

  • MacBook osx 10.6 won't boot and has DVD stuck in drive

    I have an older MacBook running osx 10.6 and it recently became unable to boot up.  It gets stuck on a gray screen with a dark gray apple logo, a spinning icon and a progress bar which goes all the way up and disappears.
    I have tried the following from this page: Mac OS X: Gray screen appears during startup
    -safe boot verbose, it gets partway through and then black screens
    -resetting NVRAM / PRAM, it seems to just be trying to boot and persists in the problem.
    It has a DVD in the drive and I cannot eject it any way I try, there is no pinhole to force eject and the eject arrow or left mouse key don't do a thing, and as I can't boot into safe mode or any other way I don't know how to eject it, and because the DVD is in there I can't reinstall the OS.
    Any ideas?  I do have an external USB dvd reader I could try attaching to it to install the OS anew but not sure that would work...
    thanks
    Tamar

    OS X- Gray progress bar appears under Apple logo during startup
    If you need to reinstall:
    Reinstall OS X without erasing the drive
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.

  • IBook won't boot after 10.4.11 update

    Booted G4 iBook after not using for several weeks. Ran Software Update, but Microsoft's ($*&% automatic Office update ran, so I installed that first. Then installed several Apple software updates (QuickTime, iWeb, ... 10.4.11 security).
    Restart failed - grey screen with apple and the circle "clock", then blue screen with cursor in upper left corner, every minute or so, the circle clock appears briefly, eventually blank blue screen.
    Booted from install disk - ran disk utility - no errors found ("repairs made").
    Ran terminal - directories seem normal - tried to boot from there - repeated crashes crash file written to ../Library/Logs/CrashRegister/Loginwindow.crash.log
    HELP!

    Hi Chuper2, and a warm welcome to the forums!
    Could be many things, we should start with this, here's the scoop...
    The usual reason why updates fail or mess things up, is if Permissions are not fixed before & after every update, with a reboot... you may get a partial update when the installer finds it doesn't have Permissions to change one obscure little part of the OS, leaving you with a mix of OS versions.
    Some people get away without Repairing Permissions for years, some for only days.
    If Permissions are wrong before applying an update, you could get mixed OS versions, if Directory is the slightest messed up, who knows!
    If many Permission are repaired, or any Directory errors are found, you may need to re-apply some the latest/biggest updates.
    May even need to do an Archive and Install if you have room on the HD...
    http://docs.info.apple.com/article.html?artnum=107120
    I only use Software Update to see what is needed, then get them for real via...
    http://www.apple.com/support/downloads/
    That way I can wait a week or so, check the forums for potential problems, and get Permissions & such in order before installing.
    Appears to be time for An Archive & Install, which gives you a new OS, but can preserve all your files, pics, music, settings, etc., as long as you have plenty of free disk space...
    http://docs.info.apple.com/article.html?artnum=107120

  • Macbook won't boot after Airport update, stuck in single user mode

    Wasn't sure what forum to put this in, so I'll start here. After re-imaging student machines from the server, for some reason the new Macbooks no longer recognize they have an airport card. On another machine I download the appropriate Airport software, copy to thumbdrive, and install on student laptop. After required reboot, the Macbook refuses to boot into OS X- I get the grey apple logo, spinning gear, then drops to what appears to be single user mode, with the exception that it seems to be "refreshing" itself constantly with messages appearing for brief moments (too fast to read). It cycles so fast that I can't type anything before it is gone again. If I purposely boot into single user mode, everything behaves as normal, if I mount as fire-wire drive, everything looks good. But I can't get into OS X. Before I brick more student machines, have any ideas?

    Some added info, i CAN boot the bricked machine into Safe mode, but at reboot I get stuck in the same cycle again.
    Oh, and in SafeBoot, the Macbook still tells me that no Airport card is installed, even though I know it does (and it's not knocked loose or anything).....

  • IBook won't boot after broken wireless connection trying to update OS

    Trying to help my kid with his iBook via telephone calls. He was updating the OS over a wireless connection, lost the signal which apparently froze the machine. When he rebooted it wouldn't go past the blue start-up screen with a spinning gear. He's used the install disk and disk repair, which said it repaired one volume but not a second one (not sure what that means). But no luck with rebooting back into his machine. He then tried to boot up in "safe mode" but that doesn't work; gets the blue screen and spinning gear again. He's got a lot of stuff on his hard drive and is understandably concerned about the best way to get the machine back to normal and still have the contents of the hard drive. Any suggestions? Thanks in advance for any help.

    Really needs to fix that HD, if DU can't do it, try, If DiskWarrior can't fix it, you might try Data Rescue II...
    http://www.alsoft.com/DiskWarrior/
    http://www.prosofteng.com/products/data_rescue.php
    (Has a Free Demo to see if it could or not, but you'll need another drive to recover to).
    Or FileSalvage...
    http://www.subrosasoft.com/OSXSoftware/index.php?%20mainpage=product_info&productsid=1
    to recover what you can.
    If the good partition is the boot partition, then Archive & Install
    http://docs.info.apple.com/article.html?artnum=107120

  • M8330f PC won't boot after accidentally having I-pod plugged in prior to booting

    My computer won't boot after having my i-pod charge cord inserted in computer prior to booting.  I have tried f8 f9 f10 f11 nothing is getting me to a point where I can actually get the computer to boot.   I realize I may need to provide more info, but don't know what else to provide you right now.   HELP!

    I used version 1.B for my motherboard.
    Yes i did. I describded what happens, when i run 1 and 2 sticks.
    -If these are timings then - 9 9 9 25
    -1600mhm before bios update and 1337mhz after update
    -Voltage: 1.5V in auto probably
    Edit1: I got a response on other forum -
    Could this be true:Quote
    The Hyper X Fury operate off of PnP and aren't compatible with the P55 chipset natively?
    In that case i could try to refund the ram, cause the place where i bought it said its compatible with P55
    Edit2: I added some info on what kingston homepage (no P55) says and specification pdf also what my seller says in description of this ram type:
    I`am am confused, honestly.
    Edit3: Aperrantly its might not support my p55 chipset, found a reply on another similar problem tread replied  by kingston tech support:
    Quote
    Hi, I'm Jewel with Kingston Technical Support and would like to offer some clarification. Our currently manufactured memory, including the HyperX Fury line, is compatible with Intel 6-series chipsets and later. The DH55TC has an Intel H55 chipset which is part of the Intel 5-series chipsets. As such, the HyperX Fury memory is not compatible with your system and we do not currently offer any memory that would be compatible with your system. You can try looking online for recently discontinued part numbers like KVR1333D3N9HK2/8G or KVR1333D3N9H/4G which are compatible with your motherboard. If you are unable to return the memory to your place of purchase, please contact us and we will do our best to work with you. Please check http://www.kingston.com/company/contacts to reach support in your area.
    If that`s the case then - outdated spec information everywhere...

  • MBP stuck to the spinning wheel, won't boot after deleting something from "/System/Library/LaunchDaemons/org.apache.httpd.plist"

    Hi all,
    I have a MBP 13" (early 2011) running Lion 10.7.2 and some days before, I wanted to host an HTTP server on it.  I googled and found I should turn on "Web Sharing" for this feature.  But unfortunately, it just wouldn't start.  I googled again and found a solution (I think).  I tried deleting the disable key and
    <string>-D</string>
             <string>WEBSHARING_ON</string>
    from "/System/Library/LaunchDaemons/org.apache.httpd.plist". I couldn't save the file because it is protected.  So I tried copying all the content of the file and save it to a new file with the same name, deleted the original file, and put the new one back to the directory.  Nothing worked.  I couldn't edit the new file as well.  So I put the original file back and replaced the new one.  Then I tried to change my rights of that directory as well as the file to "Read and Write".  And I managed to edit the file!  I deleted the mentioned sentences and saved it.  Then I tried turning Web Sharing on for about a hundred times, but never succeeded.  So I turned off my MBP and slept.  OK, the next day when I decided to try again, I found the machine won't boot!  It got stuck to the grey screen with Apple logo and a spinning wheel permanently.  Every time I needed to hold the power button for 4 seconds to turn it off.  I've tried SUM (command-S) and ran fsck, no problems were found.  I also tried the method from http://support.apple.com/kb/TA20809 , but still couldn't get past that grey screen.  Cannot boot into safe Boot also.  I don't if it is a problem related to the alias of that file because I had deleted it and put it back.  Please help.  Many thanks.
    P.S. If can't solve it, should I bring it to Apple Store and ask for Genius?

    Hi,
    Yes, I did resolve it - it was the graphics card. Changed that, updated OS X and it was done.
    I can't now remember exactly which card I used, and I'm away at the moment so I can't get to the infomation, but I do remember that it was a full length card with a large heatsink, and was a bit of a pig to squeeze into the chassis!
    Had to buy an adaptor for the second monitor connection, but that didn't cause any hassle. I got the card and cable from the local Apple Store.
    It also theoretically needed a later version of OS X than was already there, but since it allowed me to boot off the CD, that didn't matter (and it worked with the old one anyway, as it turned out).
    Oh, and also of course, although it's a bog standard PC card, you have to pay way over the odds for it because it has to have different PROMS for a Mac. (Thank you Apple.)  Just part of the price we all have to pay for using Macs.
    I seem to remember that there was a certain amount of dancing involved in upgrading the OS afterwards (might have had to do one step twice), but nothing that unusual.
    Hope this helps,
    All the best,
    Brian

  • IMac can't/won't boot from Leopard DVD

    My 1GHz G4 iMac can't or won't boot from the DVD, although I know the media is good.
    I get stuck on the grey screen, the rotating bug stops rotating after about 5 minutes.
    It will still boot from the hard disk fine, and will boot with other DVDs as well. Hardware diagnostics check out fine.
    I did try single user mode, it will get there OK.
    Verbose mode spits out a lot of messages (who knew? - lol), but nothing that seems to point to any one issue. It too stops spitting out messages after about 10 minutes.
    Any ideas?

    I did try the clicking the mouse thing just for the heck of it... no joy.
    I do see a few other threads like this one, so I'm not alone on this.
    The error messages I see are (not going to type them out all the way):
    launchd[1]: Failed to count the number of files in /System/Library/StartupItems no such file or directory
    Then a bunch of mDNSResponder errors, also saying either no such file/directory or invalid destination port.
    Then a message saying Folder Manager is being asked to create a folder (cach) while running as uid 0
    Then Cannot use ATS Persistent Store - switching to old FODB cache code
    kextd[47]: root filesystem is read-only; skipping kernel link data generation
    followed by a couple of errors from configdp[41]
    Then nothing....
    Still stuck...

  • [SOLVED] Arch won't boot after I created a separate /var parition

    Arch won't boot after I created a separate /var parition on an existing installation.And let me confess: it was maybe stupid trying to do it on an existing install.
    I edited the fstab correctly, copied the files using rsync preserving permissions. Then I kept a backup of /var using tar. Then went on to delete everything under /var, ie /var/*, the /var folder is still there. All this I did from a live CD. After that I booted into my arch linux. Here I get messages about systemd successfully finishing fsck on each of my partitions, then the screen starts blinking. And there is no more output. Pressing Ctrl+Alt+Delete causes systemd to stop its services and reboot.
    Having realized I had borked my system, I removed the /var line from fstab and restored /var from the tar file I made earlier. Again I did this from a live cd. Rebooted into my arch system, and again similar issues, namely that after fsck and messages informing a few services had started, the screen keeps blinking.
    The live cd I used for reorganizing my partitions was elementary OS freya. They have GParted in there. I also have an arch install iso lying aroung from May 2013. If necessary, I can download the latest version. I am currently typing from a Windows installation I dual boot from.
    I don't know how to extract any boot logs as I am locked out of the system. Here is my fstab in any case:
    # Filesystem information
    # /dev/sda5 LABEL=fs_root
    UUID=b9d739cf-fd8c-46dd-a919-bd827dc47c66 / ext4 rw,noatime,data=ordered 0 1
    # /dev/sda9 LABEL=fs_var
    UUID=ec0f7a49-dccd-43ab-8651-9aa3fdb41cc7 /var ext4 rw,noatime,data=ordered 0 2
    # /dev/sda2 LABEL=fs_boot
    UUID=0e8ab31a-3bda-4b85-a901-a36f21b1583d /boot ext2 rw,noatime 0 2
    # /dev/sda6 LABEL=fs_home
    UUID=d9e63c47-274e-447f-ad01-0d97afe0fd34 /home ext4 rw,noatime,data=ordered 0 2
    # /dev/sda7 LABEL=fs_swap
    UUID=7301227c-e9f3-41b8-9d0f-4cf3c159491c none swap defaults 0 0
    # /dev/sda3 LABEL=fs_win
    UUID=12B639D1B639B5D7 /fs_win ntfs uid=1000,gid=1000,dmask=027,fmask=137,showexec,nofail,noauto,x-systemd.automount 0 0
    # /dev/sda3 LABEL=fs_share
    UUID=D272269772268079 /fs_share ntfs uid=1000,gid=1000,dmask=027,fmask=137,showexec,noauto,nofail,x-systemd.automount 0 0
    I would greatly appreciate any help.
    Last edited by richcocoa (2015-05-03 18:04:44)

    Have you moved everything from /var to /new_var (i named it for learning purpose)? You shoud copy content from /var but not on the fly but booting from arch iso cd, and than you shoud mount your / into arch-chroot environement, mount all of your mount points and than copy content from default /var to new /var. The copying should be done with this
    cp -rax
    and you can add -v switch to verbose output. I have my own /var moved the same way.
    The simples way is:
    -boot the arch iso cd
    -mount all of your mount point (i created here in this step /new_var to move /var to a new place, and this /new_var i put in /etc/fstab as /var later)
    -copy /var to /new_var with -rax or -vrax (recursive, archive, this filesystem or verbose, recursive, archive, this filesystem switches)
    -umount all of it
    -reboot.
    Last edited by firekage (2015-05-02 07:49:20)

  • Mac won't boot after updating to OSX 10.6.4

    I am on my 3rd Mac that won't boot after updating to OSX 10.6.4. One MacBook Pro and two iMacs. I fixed one but the last two are getting the better of me. HD is not fried. Have tried every keyboard shortcut on startup, Disk Warrior via. Target Disk, repairing permissions in single user mode. The machines will not boot off of a CD or DVD and it will not boot up in safe mode. Something in the startup files is preventing startup. I am suspecting Sophos antivirus. I tried to uninstall it and trash it but I think it's still blocking something. Any help would be appreciated.

    Got it! Not sure if removing Sophos had anything to do with it but here's what I did.
    1) boot dead machine in Target Disk Mode (iMac)
    2) boot good machine off Snow Leopard disk (MacBook)
    3) install OS to dead machine- I found this next part very curious. When the install was complete the MacBook restarted as the iMac.
    4) ran software updates
    5) shut down MacBook then shut down iMac
    6) rebooted iMac- all was good
    I actually did this twice because a co-worker had the exact same problem on her MacBook Pro. Got both fixed today.
    Thanks everyone for your help!

  • My MacAir 1st gen. won't boot after latest OS X Lion update.

    My MacAir 1st gen. won't boot after latest OS X Lion update. tried safe boot(didn't work) tried disk repair, said it was successful, but my mac won't start up. Just get white screen.  Also been having trouble with it overheating. Fan seems to work. But when it get too hot whole interface slows down.

    Yikes, I hope you have AppleCare on it still, I think it needs to be taken in, but as a last ditch effort...
    Have you done a PRAM reset, CMD+Option+p+r...
    http://support.apple.com/kb/HT1379
    In fact, do 3 in a row, takes a bit of time.

  • Mac Mini won't boot after update

    I have a Mac Mini that won't boot after the most recent software update. Since the Mini has only a bluetooth keyboard and mouse, a number of the usual options (hold down shift, etc.) won't work. I've tried a reset, also no luck. At the moment, I can't locate my Tiger install CD either.
    When holding the power button on during boot, I get a series of flashes from the status light on the front (a set of very rapid flashes, followed by a slower set, followed by a slow set) but no startup chime, or fan, or video. My display and power source are both known-good (work fine with my Powerbook)
    Any suggestions, other than buying a hardwired keyboard/mouse?

    Welcome to Apple Discussions!
    The 'newer version of OS X" error occurs because the installer on the DVD you have booted to has by default been set to update the version of MacOS on the hard drive, which of course it can't do because the version of MacOS it is installing is newer. The only way to install in this situation is to select a different option. However, that isn't what you want to do at this point, because as it says, you'll loose your data if you do an 'erase and install'.
    Instead, you should see menus at the top of the screen when it's booted to that install disk. Click the Utilities menu, select Disk Utility, and then click the top entry for the internal hard drive on the left. Once done, click on the 'Repair Disk' button (not Repair Permissions). This will test the drive to make sure it's OK. If it reports errors, and then reports 'error or exit' with the drive not repaired, you will either need a 3rd party application such as Alsoft's Disk Warrior, or to perform an erase and install (which of course you don't want to do at this point because your data is not backed up).
    If the Repair Disk process completes with no errors, next select Repair Permissions, and let that process complete, then reboot the system as normal to see if you can now access the drive.

  • Macbook pro won't boot after installing update 10.9.3

    macbook pro won't boot after installing update 10.9.3

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • MacBook Pro won't boot after trying to install 10.7.3 update. Start up stalls at Apple logo and spinning gear.

    MacBook Pro won't boot after trying to install 10.7.3 update. Start up stalls at Apple logo and spinning gear. Computer won't even start in safe mode.

    My daughter's MacBook Pro was doing exactly the same thing.  I don't know if it had anything to do with the latest update.  She called me about a week ago saying that her MacBook began running slower by the day .  She then called me Friday and told me that it wouldn't get past the gray screen and the gear just kept on spinning.  I did everything I could over the phone including Safe mode which it wouldn't go into and thought maybe it was the hard drive.  She took it to the Apple store.  Originally, they also thought it was the hard drive.  It ended up being a corrupted operating system (Lion).  Apple genius simply re-installed Lion and she's back up and running.  Good thing she backed up right before it crapped out.  She'll be restoring everything tonight.  Don't know if re-installing Lion will help your situation, but it did the trick for my daughter.

  • Mac mini won't boot after RAM upgrade.

    Tried installing new RAM in my Mac Mini, 512MB stock to 2GB of Crucial. Followed the directions to a T, grounded myself the whole time.
    Things I've tried so far:
    1. Resetting the PRAM, no luck.
    2. Holding option at start-up, shows no icon.
    3. Holding shift, no luck.
    4. Holding X, nothing.
    How do I get it to accept a CD if it won't boot?

    Welcome to Apple Discussions!
    You clearly have a problem, but you don't describe exactly what that is other than that your mini won't boot after the upgrade. What happens when it starts up? Does it attempt to start and hang up on the grey or blue screens, or does it start beeping at you almost immediately after you try and start it up, and also flash the power light?
    If the former, then you may have dislodged a connector while working inside the system, in which case opening it up and checking that everything is firmly connected would be the first thing to do. If the latter, then the beeping/light flashing is the system telling you it has failed the power-on self test and the pattern of beeps/lights indicates why. In your case likely the system can't find workable memory. In that instance, opening the system and ensuring that the RAM is firmly and fully seated would be a good step, and if the mini continues to fail, then replacing the new RAM with the original to test that the system will then start.
    It is not likely that anything had damaged your MacOS install in the process of upgrading, thus normally no reason to need to boot to CD as a result of a RAM issue.

Maybe you are looking for

  • Alchemy and EAX doesn't w

    Hi I'm trying to get EAX sound working in games using Vista, X-Fi Extreme Music and Creative Alchemy. I've installed alchemy and added the games in the console yet the EAX options in game are still greyed out. Any ideas? Thanks Flim

  • Upload very large file to SharePoint Online

    Hi, I tried uploading very large files to SharePoint online via the REST API using JAVA. Uploading files with a size of ~160 mb works well, but if the filesize is between 400mb and 1,6 gb I either receive a Socket Exception (Connection reset by peer)

  • Inventory data sources - settings

    Hi Experts, Please provide me the solution for the following 1. For 2lis_03_bx, i want to do the setting to opening balances upto 2007.31.12, where we will do this settings. 2. Can we possible to load 2lis_03_bx and 2lis_03_bf into DSO. IF possible p

  • T5120 performance

    Hi I have a sparc T5120 8 cpu 4cores 8G RAM I'm very disapointing about the server performance. 68 seconds to create a 1G file I was wondering if someone could execute this command on a server similar to the T5120 model that we have, and send us the

  • Change MM PR or PO Item Category Settings

    Hi all, I know the standard SAP doesn't allow creation of new item categories. However, is there a configuration within SPRO that allows changing of their individual settings? If this question was previously answered in this forum, please kindly poin