IBook won't boot, stops at gray screen--HELP

I couldn't find this exact topic at first glance and I am hoping someone can help me. My ibook is about 5 years old and has only really crashed on my once 2 years ago but I was able to reinstall the OS and go on my way. This time, however, nothing works. I tried to boot up yesterday and the gray screen appeared and that was it along with a strange buzzing sound. I tried Disk Warrior, wouldn't even boot off that. Also tried booting off system disk 1 and didn't get past the language screen, just hung up with that buzz again.
Does this sound like a logic board issue? Can it be rescued?
Thanks in advance for any help!

I'm not sure if the computer can be checked out at home in such a way
in its present state, to see if there is a logic board failure behind it, now,
or not. There could be a hard disk drive failure, or ATA controller failure;
and a short list of other possibilities, best checked over by a specialist.
Certain keyboard commands and things could be tried (and I usually
assume they'd been tried before asking here, but that's often not so)
just to see if one or more of them could get a rise out of the dead Mac.
Be sure, if you can get the installer disc to boot the Mac, that you
try and use the Disk Utility to repair disc; maybe more than once;
and do not try to just reinstall an Archive and Install. The HDD may
have corruption issues and it may need low-level zero-data and re-
formatting before a new system could go on there, if it worked at all.
{Even trying to reset PRAM/NVRAM and then seeing if you can get
the bootable OSX installer disc to start up the Mac could be OK.
Maybe that PMU reset, as a last resort? It probably won't hurt...}
A system on an external bootable enclosed hard disk drive could be
used by a tech or a prepared home-tech owner, and a clone of the
machine's system then attempted to be used to boot the ailing Mac.
If the optical drive and other components relying on the logic board
are dysfunctional due to a defect on that main board, most external
devices may also have a hard time trying to use these methods of
outside efforts to troubleshoot be nominally successful.
There may be a way a tech can use an second computer to get
data off the drive in your iBook, should it come to that, by using
the FireWire Target Disk mode and see if your iBook can start
and act like an external hard disk drive. A copy of the drive's
content or parts of it may be made by the second healthy Mac.
A clone (perhaps not bootable if data on it is damaged and not
recoverable) could be made if the second healthy computer has
a clone utility and also an external drive it can copy/clone the
iBook's drive content over to. This may be asking too much;
but the home user who has stuff on hand could do it shortly.
Anyway, there are some ideas online, if you can search google
and choose appropriate words; I looked but you may need to
read through several different source links to see if anything
sounds like it may work. re: iBook won't start past grey screen
Some users have tried resetting the PMU, others tried NVRAM
and PRAM; a few tried SafeBoot to see if the system was OK
enough to load in a reduced startup mode; maybe where the
system's own Disk Utility could be ran to at least fix permissions.
And of these, if it is truly a logic board or a failed hard disk drive,
they won't really do much. Probably no harm; and that is part
of what troubleshooting is all about, working with zeros and ones!
Good luck & happy computing!
edited to add a chapter.

Similar Messages

  • Macbook Pro won't boot and getting gray screen, help!

    I have a Macbook Pro 15" from mid2011. The warranty just expired one week ago.
    I was normally using it without any problem, when suddenly the screen started to freeze and get some horizontal line. I had to force shut down with the power button couple times. The next day, my MBP wasn't booting during the startup.
    When I turn on, I can hear the chime, the Apple logo show up and the little wheel turns, but after those things the screen remaing gray without any thing happens.
    I have tried some steps that I found on discussion, forums, and websites like:
    - PRAM
    - cmd-s (to verify and clean the HD)
    - hold option and restore using a flash drive with Mountain Lion (after I choose the drive, I get a "blue" screen)
    - Remove the RAM and put back
    All those things weren't successful.
    What do you guys think I should do now?
    What are the main causes of gray screen or blue screen?
    Should I replace my RAM or HD?
    I'm avoiding to take to a technichian or a geek, because I have a lot of confidential work inside. Luckly, I have a backup of everything.
    I appreciate every reply made.
    Thanks!!

    Hi Eric,
    Thanks for your fast reply.
    Yes, I've tried cmd-R. I get a "blue screen" with vertical lines. Pretty weird.
    I'm unable to access the Disk Utility.
    Do you think the HD is damaged?

  • Mac mini mid 2011 boot stops at gray screen

    I have a mid 2011 mini running 10.9.5 that's stopping at a gray screen. Waiting for it hasn't worked yet
    On start up I get the apple logo, the wriggling worm and after a bit the screen goes black for a few seconds then comes up gray and is completely unresponsive,\.
    I tried to restart, for some reason I no longer remember and Moneydance repeatedly cancelled the restart. I held the power button to take it down and now I got nothin  A hard take down is the only thing that works
    While I was writing this I got a flag that says it's looking for a bluetooth keyboard. It had it until I turned the laptop on. I unlocked the keyboard laptop link and it connected to the mini, but still no other response
    I want to scream

    Thanks for answering.
    I haven't tried it with a wired keyboard yet. I don't have one and won't before tomorrow.
    The apple bluetooth keyboard will put this laptop in safe mode without a hitch. One problem is I normally have the speaker off and as a result I don't hear the chime.
    I clicked on the link you posted and read the page you recommended. It's helpful, but there's a problem. If I can't get it into safe mode, I won't be able to get it into target mode either, will I?
    It's not an emergency and I'm not desperate. I have two terabyte disks running in tandem on time machine so I haven't lost anything but a little more hair. Everything else is in the cloud.
    If there's an answer to this short of a trip to the genius temple I'd like to know what it is.
    Thanks again. All thoughts are valuable.
    chas

  • MacBook Pro won't boot up past gray screen?

    Okay, so I was running chrome and iTunes and spotify. Spotify was playing and Avast! Detected an infection and moved it to the chest. I quit chrome and opened up a Steam game called Garry's Mod, but it wouldn't open no matter how many times I tried it. So I tried to open chrome again and it bounced but didn't open. Tried to open system preferences and it opened but didn't show a window and wasn't responding. So I tried to restart but it wouldn't restart, so I force shut it down. Then it wouldn't go past the gray screen.
    So I restarted the PRAM. Didn't work. Tried booting into safe mode. Didn't work. When into single user and checked the directories I think. Didn't work. Called apple and repaired permissions and that didn't work. Then I downloaded OS Mavericks and reinstalled it. Didn't work. So I'm redownloading to see if it might work if i do it again. Otherwise, he said I'd have to completely restore and lose my data, which would suck. I don't have a backup unfortunately.
    What I'm wondering is if there's anything you think I could do that just might fix this?
    Or, is there anyway to save my data if it won't boot up and I don't have a backup? I have lots of writing and music I really would not like to lose.

    Your disk may be sick or dying.  As you surmised the top priority at this point is to make a copy of your data.
    First, check the health of the disk.  Boot in Recovery Mode (Boot, Command-R).  Run Disk Utility.  Click on the upper left disk icon.  Does the S.M.A.R.T. status say “Verified”?  If not the disk/SSD is unhealthy and needs to be replaced.  Click on the icon indented below, usually called “Macintosh HD” and Verify Disk.  If it finishes with a green “OK” message then all is well with the disk.  If it shows errors in red then you have found a problem to address once the system is backed up.  Do not attempt software repairs until you have secured the data.  Post back with the results of this test.
    If the disk will not show up at all in Disk Utility to run these simple testes then it is probably already dead.  A trip to an Apple store to confirm that would be in order.
    If you have an external disk drive you can use as a backup drive then do so.  If not I’m going to council you to purchase a drive you can use to replace your internal drive if need be.  The silver lining is this new drive will be much faster than the old one.  Google “Seagate 1 TB SSHD”.  You should find a drive for about $100.  Google “USB 3.0 enclosure”.  That should cost $10 to $20.  When they arrive plug the drive into the enclosure.
    Assuming it is still breathing you can recover the data without booting from the sick disk. 
    Reformat the external disk  Boot in Recovery Mode.  Start Disk Utility.  Plug in the new disk.  Select it’s disk Icon (the second one down, left justified). Select the Partition tab.
    Partition Layout > Single Partition
    Name: Emergency Recovery 1 (or whatever name you wish to use)
    Format: Mac OS Extended (journaled)
    Options… > GUID Partition Table > OK
    Apply
    Select the Restore tab.
    Drag the old system volume (Macintosh HD) to Source.
    Drag the new disk volume (Emergency Recovery 1) to Destination.
    Click on Restore.
    If that will not complete post back for another emergency data recovery method.
    If the backup succeeds use the First Aid tab in Disk Utility to select the old volume (Macintosh HD) and Repair Disk.  If it repairs with a green OK message, will it boot normally?
    Post back for further instructions.  How to proceed will depend on what has transpired to that point.

  • POWER MAC G5 WON'T BOOT UP AFTER GRAY SCREEN!!!!!!!

    My wife was on my G5 one day and then came and told me it was messed up. When i turned my G5 on, the fans came on and it appeared that it was booting up. The computer got to the gray screen, had the little working icon under the apple logo came on, then it appeared to black out right around the the icon. The screen went black and then the screed said no connection.
    Any help with this would be greatly appreciated.

    Hi foleypopo, and a warm welcome to the forums!
    Could be many things, we should start with this...
    "Try Disk Utility
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
    If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
    See if it will boot up to a screen by holding the Option/alt key down at bootup.
    Any results?

  • MBP won't boot up past gray screen

    Stays at the gray on gray apple logo screen with the rotating dial. Tried resetting PRAM, etc. Saw a similar post but it had no response. Hopefully I'll do better.
    thanks

    Boot from your system CD, run Disk First Aid from your Disk Utility and repair your permissions. If that does not work, try an Archive and Install.
    Mac OS X: About the Archive and Install feature >>
    -Bmer
    Mac Owners Support Group - Join us @ MacOSG.com
      Mac611 Mobile Mac Support - about.Mac611.com
       iTunes:MacOSG Podcast | YouTube.MacOSG.com
                       An Apple User Group 
    Have an iPhone or iPod touch? Enter Mac611.com in Safari on it for 'mobile Mac support.'

  • MacBook Pro model A1150 that won't boot past the gray screen.

    I have tried to boot in Safe and Single User modes with no luck. I just need this to boot one more time so I can get my class notes off of it. Any Suggestions? It has Snow Leopard on it but I no longer have the installation disc and I do not have a FireWire that will fit into it.

    If you cannot get the MBP to boot, then it is a Firewire (assuming it will power up and can be put into Target Disk Mode) or an enclosure.  Those are the only two choices you have.
    Ciao.

  • My MacPro won't Boot - stuck on White Screen - help?

    I have a MAC PRO, it was asleep during a power outtage... Now when i try to restart the computer, it never boots - and gets caught in an endless white screen. I've tried to zap my PRAM, still nothing. I just ran out of my apple support, and they are telling me to bring it - is there anything I can do on my own to fix this without having to pay a fortune?

    Google - your OEM DVD has AHT on its label
    A storm can send too much juice down the modem line and fry the ethernet ports, as long as it is wired, does not need to be running - and sleep is still 'running.'
    I consider UPS $200 to be worth investment - as much AppleCare and helps protect the PSU which costs more to replace. My modem had to be replaced (router seems okay) was $79.
    CyberPower CP1500PFCLCD PFC Compatible 1500VA 900W Pure Sine Wave Tower UPS
    http://www.amazon.com/CyberPower-CP1500PFCLCD-Compatible-1500VA-Tower/dp/B00429N 19W/
    How to clone your system:
    http://macperformanceguide.com/Mac-HowToClone-backup.html
    http://macperformanceguide.com/Mac-HowToClone.html
    http://www.macupdate.com/app/mac/7032/carbon-copy-cloner
    http://www.macperformanceguide.com/blog/2012/20120711_2-MacPro-internal-clone-ba ckup.html

  • IBook won't boot from CD

    I bought this iBook, used, with Tiger on it. A while back, it had Debian Lenny installed onto it. Now I can't reinstall Tiger...
    I have tried holding "C" before the gray screen when it boots, and I've tried holding "option". It only shows the disk with the Linux penguin, but not my Tiger install CD. Holding C, it only loops trying to read the CD; it does NOT reboot, it just unsuccessfully continues attempting to read the disk.
    I know it not be a problem with my CD, because I can't reinstall Debian or Kubuntu or Ubuntu, even from the disk used in the past. I have tried resetting the PRAM and PMU..
    Is there any hope?? I'm done with using Linux.

    Yes, the iMac will still boot from the CD. The iBook won't boot from any disk anymore, not even retail Panther. I know that the CD drive still works, because I'm using it right now to listen to music in Debian.. I think something's up with the open firmware, and I should update it but that can only be done through Classic right? There's not even an update for my iBook, I think.
    I've tried burning several different linix distros, and they all work with my iMac but not iBook.
    And, yes, it is a set of four CDs for Tiger.

  • IBook will not start up past gray screen w/ apple logo

    iBook will not start up past gray screen w/ apple logo. So I have zeroed out the hard drive and reinstalled tiger. No change except if I start up holding shift it will boot and welcome comes up then black screen that says you must restart by holding down power key.
    Zeroed out the HD again with same results. Also I have a iBook G3 with the same symptoms.

    What you are experiencing is a kernel panic.
    Try starting up from the Mac OS X Install Disc by inserting the disc and restarting your computer, holding down the C key as the startup chime is ending. Then choose Installer > Open Disk Utility (in Panther) or (in Tiger) click 'Next' at the language screen and choose Utilities > Disk Utility and select the hard drive in the left column. Choose the First Aid tab. Click Repair Disk to test and repair the hard drive.
    Once you have repaired the hard drive with the Install disc's Disk Utility, then try to restart normally, and go to Applications > Utilities > Disk Utility. Click on the top hard drive icon in the left sidebar and note the S.M.A.R.T. status at the bottom right of the pane. What does it say?
    Select the named boot volume in the left sidebar, ("Macintosh HD" unless you've renamed it). What is the hard drive capacity and how much space remains available on it? Repair permissions on it.
    See if a little hard drive maintenance helps things out.

  • My MacBook won't boot past the grey screen showing a folder sign with question mark, My MacBook won't boot past the grey screen showing a folder sign with question mark, My MacBook won't boot past the grey screen showing a folder sign with question mark

    Hi, I need some serious help immediately.  I have been using an external hard disc to watch movies and stuff on my MacBook. However last night I removed the external hard disc accidentally without closing the programs that were still using the data from the hard disk and hence the complete MacBook got hanged and nothing responded. I tried using command Q to shut down the program buy it didn't help either. So finally I gave up and shut down the MacBook manually by pressing the power on/off button.
    However when I tried restarting my MacBook I faced a serious problem. The start up won't boot beyond the grey screen showing a folder sign with a question mark sign in it .. I just don't know what to do. Somebody please help me and guide me through this problem
    Awaiting quick response
    Gratitude in advance
    Regards
    AJ

    If you try booting your Mac holding down the Option key, you should see the icon for Macintosh HD. Try selecting that to boot. If you can get in that way, go to System Preferences > Startup Disk and select your Mac HD, then click Restart.
    If you can't see the Mac HD, the volume may indeed need repair as Niel said.

  • My MacBook won't boot past the grey screen.. help!

    Today I was having a problem with Safari. For some reason, it kept restarting. This annoyed me, so I restarted my MacBook. Unfortunately, it won't boot past the grey screen, with the thing spinning in the middle. I've been into disk utility and it says my HDD is fine. I restarted from this, and yet it still won't boot. Can anyone suggest what's wrong/what to do?
    Thanks in advance

    Retrieving data using Target Disk Mode:
    1) Shut down both computers
    2) Connect the two computers using a Firewire cable
    3) Start up the working computer.
    4) Once the working computer is ready, startup your MacBook with the T key held down.
    5) Your MacBook's hard drive should appear as an external hard drive on the working Mac. Drag & drop any files you want to save.
    ~Lyssa

  • Won't boot up, only grey screen w/ don't park symbol, spinning wheel

    Won't boot up, only grey screen w/ don't park symbol, spinning wheel

    this link may help you http://support.apple.com/kb/TS2570
    let us know how it turns out
    and good luck

  • Reset PMU and Powerbook won't boot past the blue screen with "Mac OSX" box

    Hi-
    Problem: I tried to reset my PMU, and now when my computer restarts it won't go past the blue screen with the "Mac OSX" logo in the box (and progress bar, that never fills up). I then also tried to reset PRAM, but it still won't boot properly.
    Backstory--
    I've had my 12-inch Powerbook G4 for about 3.5 years already, so things are starting to get a bit out of whack. I replaced my battery about 3 months ago, which has been great, but recently my power-cord has been wonky (having to unplug it and replug it in to make sure it actually charges the computer, the light flickers on and off, etc). Today it actually started producing SPARKS at the place where the thin white wire meets the white plastic power brick, so I decided it was time to get a new one. Brought it home, plugged it in, and since it seemed like the battery indication icon on the menu bar was all out of sync with the powercord colored-light, I tried restarting it a few times, but still the same. Then, I decided to reset the PMU, which may have been a huge mistake. And now it won't boot past the blue screen... Any advice? I'm going to try restarting it in "safe" mode, but I'd be so grateful for any recommendations. Hope I haven't done something irreversibly stupid with the PMU reset.
    Thanks,
    Samantha

    Hello all,
    Thanks for all of your great suggestions and info-- here are a few responses.
    1) The disk I just borrowed from my friend appears to be the full retail version-- it looks just like the links that Ali B sent, and is in a large box saying "Mac OSX Tiger, version 10.4"... will this be the proper disk to do an Erase and Install? The only other disks I have came with my Powerbook when it was originally purchased, when it came Panther (I think, 10.3?). Would I use both sets of these disks to do erase and install? Or only the Tiger OSX disks?
    2) I get the sense that Disk Warrior or Tech Tool might be necessary, but does it make sense to TRY to do erase-install before buying them? Also, are there any downloadable (for pay) versions of this, or would I need to track down the actual physical disks in Hong Kong or wait for them to be shipped?
    3) I haven't yet tried the S.M.A.R.T. test, should I do that first? What is the procedure? Are there any results or ways to know if the drive is too far gone (so that I might instead replace the internal hard-drive) instead of pay 100 USD first to do the disk repair?
    4) Cornelius said: "An alternative would be to completely reformat and erase the entire HDD, then re-install and restore your data from backup. If your backup is in the form of a bootable clone of the entire HDD, you can just clone it back." I use Super-Duper to back-up and the most recent one copied the whole thing-- what would be the later procedure of "cloning it back"?
    5) As I'm able to use my computer pretty normally right now, but does it still mean that it might crash/die at any moment? Is there any way to tell?
    Thanks so much!

  • G5 turns on but display stops at gray screen+apple logo

    Can someone tell me why my G5 turns on but display stops at gray screen+apple logo. The keyboard and the superdrive not responding. After a minute the fans kick in and grow louder and faster...?? I tried a reset with the P and R but keyboard N/S. USB have power. I do get the start sound then the gray logo+screen.
    Thanks for the help anyone!!
    G5 dual 2G   Mac OS X (10.3.9)   2G RAM, 23" display

    I was getting a similar issue yesterday, stuck on the
    grey screen, then the G5 turned into mini turbine
    engine. I'm not sure what fixed it, i took out the
    plastic wind deflector and noticed three leds next to
    the RAM slots were lit up.. with some quick googling
    bringing me back to apple's support pages, it turned
    out the lights came up because the deflector shield
    wasn't in place. Anyway myabe it was slightly out of
    place, but that coupled with unplugging the power
    cable for some moments seemed to help, and i was able
    to get past the logo screen etc..
    but i was still getting intermittent issues, with
    startup and programs, and getting plenty of crashes.
    So i did the Apple Hardware Test, and after 3hrs it
    turned out my RAM was at fault. I recieved the
    machine only a week back, since then i've added new
    RAM, which was the exact same Samsung RAM that apple
    use, though one stick didn't share the exact same
    serial, it was still the same spec.. anyway i've
    removed the pair of 1GB sticks for the time being,
    and since doing so, i've got my mac running to its
    full strength.. i just hope i can sort out this RAM
    issue and not have blown my money.
    Thanks for the help but I tried the cable thing etc and nothing so I reformated the disk (clean install and I'm back to normal now...so the RAMS were not the problem in my case.
    Also, I'm glad I backed up all my stuff frequently therefore, no losses...
    G5 dual 2G Mac OS X (10.3.9) 2G RAM, 23' display

Maybe you are looking for

  • Hide Form Field

    I have a form that captures data, the user can sign up as a couple or single. On a couple the have to put in 2 names on a single only one. I would like the second name field only available if they select couple from a drop down or radio button. I use

  • BC 2.1 Update Vista 32 Doesn't Work

    Updated XP Pro just fine with the 2.1 update. Downloaded the Vista 32 update and the .exe launches but eventually terminates after about half a minute. Logged in with admin rights and user account control is OFF. I see from maxfixit I'm not the only

  • PeopleTools 8.51 - PeopleSoft Test Framework

    PeopleSoft Test Framework(PTF) sounds interesting and great development in PeopleSoft technology. I did not get a chance to load PeopleTools 8.51 and test PTF, would like to if anyone has tested PTF and what do you think of it, are there any limitati

  • Excecution in transaction mode

    I have 3 SQL statements to be exceuted . The XML SQL message format is <Statement 1> Delete Query </Statement 1> <Statement 2> Insert Query </Statement 2> <Statement 3> Stored Procedure </Statement 3> Are all these stetements going to be execurted in

  • Teclas de curve 9300

    Tengo un blackberry curve 9300 y cuando lo obtuve me fije que las teclas encendían de un color blanco. Ahora tengo un problema ya no encienden. Están apagadas completamente y me es difícil escribir mensajes por las noches ya que tengo un problema vis