Ibook won't function with a a battery in place

Ibook G4 1.2 on 10.4.11 runs very well until there's a battery put into it!
If moved or used, it will then shutdown (well, the machine runs but the display will only
display black). If I do a PMU reset and take the battery out and restore mains power
then all is well again. Tried two different batteries with same problem.
Any ideas?

Hi, Aaron. Welcome to Apple Discussions.
Try checking to make sure that the keyboard is properly seated:
http://docs.info.apple.com/article.html?artnum=111917
Remove it and carefully put it back in to be sure.
Sometimes the keyboard is just loose enough to ride up when the power plug is put in, and it pushes the keyboard up just enough to keep it from sleeping when the lid is closed.

Similar Messages

  • PDF files on iPad's iBooks won't sync with iPhone's iBooks

    I have many downloaded PDF files saved in my iBooks app on my iPad.  They are work documents so nothing that I purchased from the store.  I have everything set to sync in my iBook settings, but when I look in iBooks on my iPhone, only the folders synced, not the actual documents.  Is there a way to get them to sync?

    Even though they aren't iTunes purchases you should be able copy them from your iPad to your computer's iTunes via File > Transfer Purchases (File > Devices > Transfer Purchases if you have iTunes 11 on your computer) - you can then sync them to your iPhone.
    The sync bookmarks and sync collections settings won't copy items between your devices, it will just keep the the books/PDFs that you have on both devices in-line with each other e.g. if you have a PDF on both and you move it into a collection on one device then it will put into the same collection on the other device.

  • VM-605 won't function with Curve 8330 passworded and locked

    With my Curve 8330 passworded and keyboard locked, the handsfree functions of the VM-605 fail to function.  I push the button to initiate the function, the tone is heard, but the device fails.  The Curve displays "unknown error" on screen.  However, if I delete my password entirely, and yet leave the Curve keyboard locked, handsfree functions perform as expected.  Is there a workaround for this?  I don't necessarily want to leave my Curve unprotected.

    should hear "power on" when you hold the front panel down after a bit.
    Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
    Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
    Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
    BESAdmin's, please make a signature with your BES environment info.
    SIM Free BlackBerry Unlocking FAQ
    Follow me on Twitter @knottyrope
    Want to thank me? Buy my KnottyRope App here
    BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

  • HT4059 iBooks won't stream with other iPad

    I purchased books on my old iPad but now 2 of them won't show purchased on new iPad mini. How do I download them without being charged?

    They must have been purchased with a different Apple ID, so use that ID to download them.

  • Apple tv second generation will no longer function with netflix

    My apple tv won't function with my netflix anymore and i cannot figure out why every film i select it states this error message
    A network error has occured and this title cannot be played or found at this time.
    i know my internet is working just fine and yes i updated to the latest apple tv version but nothing netflix won't work but everything else does what gives could this be because netflix updated to a new version and apple tv hasn't updated to the new version of netflix yet???

    Yes i did reboot same error message and the latest version of the netflix streaming app is 2.37 on all ios devices including apple tv but they went to netflix version 2.38 on ps3 and xbox 360 so now it doesnt work on netflix at all i found this out after talking to netflix customer support.

  • My Airport doesn't function with Mountain Lion.  Why?

    I have an Airport 6.1., and it won't function with Mountain Lion.  If this is a software issue, does anybody know if Apple have any plans to upgrade their software.  Hopefully I won't need to buy a new Airport base station.  I don't know how to contact Apple support directly without paying for it.

    6.1 is a version of AirPort Utility....the software application in Lion and Mountain Lion that is used to configure Apple routers. This software is not compatible with older versions of the Apple AirPort routers.
    It sounds like you have an older "round" version of the AirPort Extreme.....or.....an older version of the AirPort Express.
    Can you provide more information so we can help? Once we have the info, we may have a possible workaround for you.
    If you have an AirPort Express, look for the Model No on the side of the device and post back with that info. It will likely be either A1084 or A1088.

  • What apps won't work with maverick?

    i am about to update to Maverick, aere there any apps that won't function with Maverick?

    It is far from a complete list but http://roaringapps.com/apps:table is a good starting point. It should not be considered 100% accurate.
    Uninstall any and all "anti-virus" or "cleaning" apps that should not be installed on any Mac, and back up your system as a precaution against the unexpected. Merely having a backup seems to preclude the need to ever require one.

  • IBook won't run on battery

    Hi Folks
    Wondering if someone can point me in the right direction here. I have an iBook G3 900 mhz model that I just replace the logic board in (video issue). The ibook runs great now, but all of a sudden it won't work with out the power adapter plugged in. I thought maybe the battery went bad, but I checked it in my other iBook and it is fine.
    I bought the Logic board at a discount because it had a missing plug in connector, which is the one that connects from the Logic board to the power button. I soldered it back on and powered up the Laptop fine. and it even worked with just the battery for a short while, but now only works with the adapter. Should I open it up and re solder the connection, or is this another issue?
    Thanks
    Don

    Hey Don,
    I have an iBook G3 900 mhz model that I just replace the logic board in (video issue).
    Just curious. Did the GPU chip die? or was it the BGA issue? I repair and donate iBooks to inner city school teachers.
    it had a missing plug in connector, which is the one that connects from the Logic board to the power button. I soldered it back on and powered up the Laptop fine.
    Wow good job! That's not easy to do. BTW that plug would have nothing to do with the not running on battery problem. It's part of the "soft start" circuit.
    This is from the service manual for the 900:
    "The computer runs when plugged into a wall outlet but not on battery power
    1. Reseat battery to verify battery is seated correctly with battery lock engaged.
    2. Try known-good charged battery.
    3. Reset the power manager by pressing the key combination Control-Option-Shiftpower.
    Warning: Make sure you do not hold down the "fn" key when resetting the
    power manager.
    Warning: Resetting the power manager will permanently remove a RAM disk, if
    present, and all of its contents. You will also need to reset the date and time
    (using the Date & Time control panel).
    4. Replace logic board."
    That "power manager" they speak of is a PMU 99 which I believe is CMOS and very sensitive to static charges.
    Richard

  • IBook G4 Re-install - won't reboot with Panther DVD

    Hi -- trying to reinstall Panther 10.3 with Disk 1 (holding down the 'C' button during reboot) - but it's not working. I get the light blue screen with the Apple -- but nothing else. The iBook won't reboot whatsoever thanks to the constant loading of garbage software by the 13 year-old owner
    Help!

    Hi Mark,
    Definitely a PMU reset: Unplug the ibook, take out it's battery, and press Shift-Option-Apple-Power together for 1 second. Release, wait 10 seconds, and attempt to boot. (You'll need to plug it in or put back the battery first. I invariably forget this step. LOL)
    If no joy, insert your OS install disk, then power on while holding the Option key. Keep the option key down until you see a gray screen. You should see little icons for your internal hard disk and the install media. This can take a while. Be patient. Click on the CD and then the right-arrow button to boot from the CD.
    Still problems? Take up the ibook keyboard to reveal the airport card underneath. Take it out and reseat it and its antenna cable. A loose airport card can cause wierd startup problems.
    Let us know how it comes out.
    Good luck,
    John

  • IBook Won't Recognize Charge in Battery

    My iBook, a Revision B non-FireWire machine, is experiencing a very unusual problem in that it won't recognize the charge in a battery.
    Like many iBooks, this one no longer will charge a battery. I purchased a new battery from OWC in the fall and found it wasn't charging--yet one of my two decade-old batteries was still initiating the amber light (something this battery did not). I sent the battery back and received another one, which gave me the same symptoms.
    I performed the oft-discussed routines for resetting power management systems on iBooks, resetting the PMU, PRAM, and NVRAM. I tried each procedure several times and even "drained" the capacitor by leaving it unplugged/unbatteried for 30 minutes. The computer still wouldn't charge the battery--there was no attempt made according to the symbols in the control strip. (My iBook runs 9.1 although I do have a copy of Jaguar I could install on it--but at the moment I have the extra space filled with VPC and Win2K). I also tried Apple's battery reset extension.
    Figuring I could get away without built-in charging, as this is currently a laptop I only use on an occasional basis, I bought a VST charger. The battery charged up fine. When I put it in the iBook, I got maybe 10-15 seconds of battery life.
    The main problem here: *even with a known charged battery, the computer won't see any charge in that battery*. It's fine by me if the computer doesn't want to charge, as I have the VST charger, but I do want it to work off the battery.
    Some history, in case any of this is relevant: I purchased this computer new in August 2000 with two batteries. The original yo-yo adapter shorted out five years later. It took about three weeks for a replacement to come, and that replacement was an OWC house brand charger (not an Apple). I depleted both batteries, which were still getting close to their original capacity, during the time between the adapter's failure and the arrival of the new adapter. Neither battery charged on the new adapter, although I blamed this on a combination of drainage and age. I later replaced the power adapter with another Apple, but the batteries had been drained for too long to charge back up. Neither will charge in the VST station, although the OWC battery does.
    The computer runs OS 9.1, has 192MB RAM, and has not seen a fresh system install in about three years. It has an Airport card installed and has no history of trouble outside of the shorted yo-yo and the inability to charge/recognize batteries.
    I've worked on tons of Macs and have seen far crazier problems, all of which have been solvable, but this one is impossible even for this veteran Apple user to figure out. Every known remedy has failed, and I'm wondering if perhaps it's an internal problem relating to the PRAM capacitor--which appears as though it would have failed in 2005 if it indeed failed.
    Any help would be greatly appreciated--although this is by no means my main machine, I still use it for a few OS 9 programs I haven't bothered to upgrade and definitely want to use it without the AC adapter for the first time in nearly six years.

    It's a good idea to start your own discussion when you have a different problem than the one discussed in a particular thread.
    https://discussions.apple.com/static/apple/tutorial/ask.html
    Which exact iBook model is it?
    You can choose from this list:
    http://www.everymac.com/systems/apple/ibook/index-ibook.html
    If it's one of the older, colored iBooks, you need to update the firmware on it before attempting to boot from an OS X disc or install OS X (as mentioned above).
    http://support.apple.com/kb/DL1284?viewlocale=en_US
    Is the Jaguar CD the full retail version or a disc that came with another Mac? If it's a disc that came with another Mac, it probably won't work with the iBook.

  • IBook G3 800 GHz will work on battery power but will not turn on with AC pl

    This iBook will function with a battery, but when the AC is plugged in it does nothing. It will not turn on. Is this a logic board problem or maybe a short or something not connected inside for the AC plug?

    It's a rather complicated repair:
    http://www.ifixit.com/Guide/Repair/iBook-G3-12-Inch-DC-In-Board/134/1
    Apple doesn't consider it a do-it-yourself job.
    Expect to pay $115-$145 for the repair (plus shipping if you have to send it away). The iBook may not be worth the repair, so some people are trying to do it themselves.

  • Ipod touch 3rd gen won't sync with itunes..i know i have to replace the battery as it won't hold a charge.

    It turns on fine, appears to charge but will not hold a charge..It won't sync with my Mac Book Pro, iMac, PC or Netbook.  Do you think it is the battery?

    What happens when you try to sync? Error messages?
    An appointment at the Genius Bar of an Apple store might be useful.

  • 3rd party USB mouse won't work with G4 iBook 10.3.9

    3rd party USB mouse (see specs below)won't work with G4 iBook 10.3.9.
    http://www.inland-products.com/singleproduct.asp?search=usb&partnum=07340-SpecR
    I notice the specs say this mouse works with windows(no mention of Mac) yet the guy where I bought it assured me it would work fine with a Mac. The keyboard/mouse preferences shows a muouse but there is no movement or response from mouse. I would assume it was not reading it if not from appearance of "mouse" preference. I also have intalled UBBoverdrive in hopes that that might help but device/mouse menue does not appear to support mouse.
    Is there a way to get this to work or should I just return it to the vendor?
    Can anyone suggest a good CHEAP 3n button mouse for Mac?

    The name of that mouse is deceiving. It is not a USB mouse it is a wireless mouse. Unfortunately without the proper OS X drivers for the USB/wireless adapter you won't be able to get that thing to work.
    If you are looking for an inexpensive USB mouse, checkout the Kensington Mouse in a Box Optical.
    Does your iBook have Bluetooth? If so take a look at the Kensington PilotMouse Mini Bluetooth Mouse. I have one of these and it works great.

  • Computer won't start with battery in it...

    have an Aluminum 15" Powerbook G4. I have had this since 2001, when I bought it. I recently updated to OSX. I hadn't used the computer in months and when I went to try and take care of the computer and update to OS 10.4.5 I encountered a problem. When I turned it on nothing happened. I had to turn it off, hit the reset button and then plug in the computer. THe battery was dead so I expected that. But what happened next puzzled me and still does puzzle me.
    I managed to get the computer on by holding in the power button. I heard the familiar start up sound(the sound splash if you will) and when that ended I heard this incredibly loud, white noise coming from my speaker. The noise occured about four times. I was in the room with my wife and mother and they both looked at me like 'what the heck was that?"
    Now I thought maybe this was an issue with my one battery so I uncovered my second battery and the same thing happened. It won't start up with a battery in there. I took the battery out and found that when it seemed to turn on just fine, I managed to get online and run a complete update. When it came time for the software required restart the computer started up and didn't make any noise at all.
    I guess I don't know what to do now. I ran the diagnostics on the computer, from the disk utility and it seemed to come up clean. I don't mind not having the battery in the computer but I don't always want to fix the date and time and the like.
    THis is why I'm posting.
    I also noticed tonight, when I was charging up the battery that I had to stop and take it with me someplace. When I went to turn it back on, with the battery in and it plugged in the noise came back on and I had to fix the date and time again.
    Thanks to those who post, I really appreciate it.

    not sure if this will solve your problem but you can try..
    look at the battery exchange program if your battery is eligable for the replacement or take it to the local dealer so they can check if your board sound is ok.
    PowerBook G4   Mac OS X (10.3.9)  

  • SatelliteU300 Won't start with AC power connected and fully charged battery

    I just bought a U300-13U. It works great when battery is charging and AC is connected. However if left to charge up fully it won't start with AC connected. Unpluging the power or removing the battery and running on AC makes it work fine. Is this a 'feature' to stop overcharging or overheating the battery, or just a problem with this machine. I want to run with AC and battery both connected all the time as I have done with all my other laptops.
    Any help appreciated.

    Hello Andy
    Friend of mine has this small U300 and everything work well. I have had it few weeks ago to test WXp installation and it works perfectly.
    Please test it again very carefully and if the same happen again I recommend you to contact Authorized service partner in your country. Let them check your notebook. I must be honest and say that described issue sounds strange to me and please do not wait too long. Contact service as soon as possible.
    Bye and good luck!

Maybe you are looking for

  • New User Guide (common questions)

    Common Ipod Info For those who just go an ipod here is some basic info on the ipod and how to do a few things. Basic Info Disconnecting/Connecting Just plug in via USB and wait (can take a few minutes). Ipod will load up and the screen will show DO N

  • 500 Internal server error in web template  for specific users

    Hi We have issue with Web templates for some of the users giving error  "500 internal Server Error", all other users able to run the same report. We have authorization for the user and following variable which will give target currency selection in v

  • ID3 Tags and MP3 player

    Hello, I can't afford a new iPod at the moment so brought an Archos MP3 player. It is a drag and drop device so all I need to do is drop the MP3 file in the music folder on the MP3 player. The only issue I am having is that the songs are not labeled

  • Start dashboard development

    Hello, I'm new to development of obiee dashboards, can anyone advise me on what and where to start development? let's say, the rpd is now ready. Should I create first set up folders & security of which users can access? Or should I create first all t

  • Keyboard shortcuts won't work – please help

    I have Dreamweaver CS3 on a PC with Windows XP, and recently had to reinstall my operating system to recover from a malware attack.  Ever since I redid my computer, I've been unable to use any keyboard shortcuts in Dreamweaver.  For example, Ctrl+v p