IBook won't power on, but the fan is running top speed

hy,
just got back an iBook from the Apple Store and now it won't turn on..the screen stays black but the fan (at least it sounds like a fan) keeps running quite fast and loud.....any help would be greatly appreciated
neil

sad thing is the logic board was just replaced (within the last week)...not cool
oh well, thanks anyhow, at least we won't spend time waiting for it to power on

Similar Messages

  • Imac 2008 20" wont start up. Has no chime, no display but the fans are running. Has a suspected graphics card problem. Any help would be appreciated.

    After removing the graphics card to have a look at it, due to a suspected graphics problem, my imac 2008 20" wont now start. There is no chime, no display but the fans run, starting off slowly then when turned off by the power button and then turned back on with power button held in, the speed of the fans ramps right up. Any ideas?

    If you live near an Apple Store, make a Genius Bar appointment to have the computer tested. Supposedly there is no charge for testing. Use 2nd link if not near an Apple Store or aren’t in the US.
    Genius Bar Reservation US
    Authorized Service Provider

  • Adaptor won't power my PB: the battery is running out!

    I was wondering if anyone found a solution to the problem below that I found in this forum. I am having the same problem and don't know what to do. Just wish that this wasn't an internal problem.
    ========================================================
    I've got a 1.33Ghz PowerBook G4 15" and I am having problems with the AC adaptor.
    When I plug the adaptor in, the light on the adaptor turns orange but won't charge the battery or power the computer - it will only run from the battery. If I wiggle the connector where it plugs into the computer then the light goes green but still won't power the computer.
    The connector where it plugs into the computer feels quite loose, do you think replacing it would work, or is it an internal problem?

    When you say connector are you referring to the port that you plug the adaptor into ON the computer? THAT is loose? Or are you talking about the plug part?
    Did you ever get your problem resolved?
    All of a sudden I'm having an issue when I plug the adaptor into the port it glows for a brief second and then it stops, so it's not powering or charging my powerbook. I can't use it because there is only 4% battery life left. I don't know if it''s the adaptor or the PB itself...nothing is loose. But I'm a little annoyed because this computer has only been lightly used as a backup, so it's practically brand new and a little premature for things to just stop working...
    I can't remember what OS and I can't check right now. It's over a year old.

  • IBook won't turn on, but fan is running

    Okay, I have an iBook w/a recalled battery, which I have already requested. I am waiting for that to come in. Upon the suggestion of the apple website, I have removed my bad battery and am running my laptop solely from the a/c adapter. However, now my comp. won't turn on. The fan is running, but nothing else is happening. Also, I have followed the advice of apple's tech support link, but that has not done any good. Per their advise, I put in the Software Install and Restore disc, and now I can't get it to eject. I need help asap, if anyone has any anwers. Thanks

    Hi, and welcome to Apple Discussions.
    From the Apple Knowledge Base article on troubleshooting slot load drives:
    The drive doesn't eject discs
    If the drive ejects discs slowly or appears to be struggling, insert and eject a disc several times.
    If the drive does not eject discs, press the F12 key. Holding down the trackpad button during startup should also eject a disc.
    Reset the parameter RAM (PRAM) and/or the Power Manager (PMU). PMU reset instructions for iBook G4/PowerBook G4.
    If the disc still does not eject, contact Apple to arrange for service.
    I hope something there helps.

  • When SLEEP is selected manually the fan spins at maximum speed non-stop

    Hi,
    I have HP Pavilion Elite HPE-180t PC, WIndows 7, Home Premioum, 64 bits.
    Occasionally, I put the PC into sleep mode manually if I am finished with my work. Here are the steps I do:
    1. Press Start
    2. On the Shut down drop down list select Sleep
    3. PC turns the fan speed up for a few seconds and then goes to sleep with the power button changing color from blue to yellow.
    But once in a while on the third step the fan speed is cranked up to maximum (quite noisy), the button goes from blue to yellow, but the fan keeps running at maximum speed non-stop.
    In these situations pressing any key on the keyboard doesn't affect this state i.e. the fan keeps running, and the PC is unresponsive to any keyboard or mouse input.
    The only way I found to remedy this case is to press and hold down the power button until the fan stops and the PC shuts down completely.
    Any suggestions on how to avoid the freeze up while going to sleep mode manually?

    Hi,
    I have the same motherboard in my HP e9280t.  Open up your PC and use a can of compressed air and blow the dust out of the CPU heat sink, power supply, video card and system fans.
    Open up the RUN window and enter: msinfo32
    If msinfo32 doesn't show the bios level then you will have to boot into computer setup and find the bios level.
    Look for the bios level. Bios version 5.29 is the latest and I have been running that level for a long time without issues.
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • My mac book pro won't start only the fan starts running alone when I turn it on but no display is shown on the screnn

    My mac book pro wont start only the fan starts running when i turn it on but no display is shown on the screen

    Have you tried this yet?
    Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support

  • Quicksilver Dual 1GHz won't power up with the monitor connected.

    My Quicksilver with 17" LCD Studio display won't start up. The power button blinks on, the fans make a turn or two and the red LED on the motherboard blinks once. If I hold the power button down it blinks once but the fans and red LED repeat once a second. After this began I started it up in FireWire target mode with the monitor disconnected and it worked fine for a few hours. Then it seemed to start up ok without the monitor attached but would immediately shut off when I connected the monitor. Now just the behavior I described at the beginning. I've reset the SMU (PMU??), zapped the PRAM. left it unplugged and taken out the battery. Nothing changes. This has all been in the past 24 hours after I shipped the CPU and monitor back to my home. What's next??
    Frank

    Thanks. I tried an old VGA monitor and The CPU started up without a problem. Then I examined the pins on the Studio Display. That was the problem. Since I pugged it in several times, both the male and female plugs were screwed up. I carefully moved the pins on the plug and the receptacle back into place and everything is great now. I’m sure it wont last through to many repluggings, though.
    Frank

  • I have a new Macbook Air and for the last few days the fan had run continuously, this is the first time it has ever run, and now it won't stop, the fan starts up as soon as I turn it on. The computer is not hot.Any ideas on how I can fix this please ?

    I have a new Macbook Air, 6 months old, and for the last few days the fan had run continuously, this is the first time it has ever run, and now it won't stop, the fan starts up as soon as I turn it on and the computer seems to running more slowy.The computer is not hot but I am worried it may burn out,.Any ideas on how I can fix this please ?

    Hello dwb,
    Here is the screen shot, just the top half, there are another 10 pages, but I guess this should enough for you to have an idea of waht is going on, bit small I am afraid. No, I don't have any apps setup to run when I open my computer, the kernel, varies between 290 and 305 per cent ish.
    Would that PRAM thing help ? I think it may be the computer itself, well something inside, as this the first time that the fan has ever started running since I have this computer, even when I have 3 or 4 apps running.
    Thank you again for your advice,
    Regard,
    Beauty of Bath

  • IBook 12" 1.33 Question about the Fan?

    I am looking to purchase an apple laptop for class and work. I have a HP laptop now that runs great and is fine, except the underlying problem is windows just plain ***** and I'm tired of all the crap that goes wrong with windows. I have a mac desktop, the new iMac 20" core duo, but am looking to replace this laptop since I may need it for school and work.
    My question is geared towards those that use their iBook with light/moderate use...does the fan run constantly and is it loud? I think the most annoying thing about this HP laptop is sitting in class or a meeting and the fan is running and its LOUD! So, if I were typically using microsoft office (i.e. word, excel) or photoshop, would the fan be running a lot?? Thanks for any advice!

    Have to politely disagree with this comment... an iBook's fan can be quite loud! It's quite obvious when it's on vs. when it's off!!
    And it could run while using Office depending upon
    a) air circulation issues
    b) background indexing
    c) hard drive room
    etc.
    But having said all that, I don't think this should prevent you from buying an iBook as the fan will rarely come on under normal operating circumstances.
    Until recently, after upgrading to the laste OS and security update, and seemingly ONLY when indexing an external hard drive, our iBooks' fans have practically never come on at all.

  • My Mac book pro won't charge. But the connector is plugged in and shows that its charging but it says it has 0% but if I unplug it it will shut off

    My Mac book pro won't charge. But the connector is plugged in and shows that its charging but it says it has 0% but if I unplug it it will shut off. It's been like this all day but I didn't notice till I turned it on.

    It's either a power adapter issue (not likely) or (more likely) a power supply problem on your MBP. Take the machine into your local Apple Store or an AASP and have them diagnose the problem.
    Good luck,
    Clinton

  • The iMac won't turn on, only the fan blows loudly. What's wrong with it?

    Yesterday, I could get into the iMac but after a few minutes of surfing on the Firebox browser, the screen split and the top half was blinking and flashing different colours.  I fixed it by re-booting the computer, however it happened again and re-booting didn't work, it just turned off.   Today, I can't get the computer to turn on. I would hold the power button and the fan would start up, however, the computer continues to show a blank screen.  I click on the keys and get a sound with each keystroke. My guess is that the monitor is just shot.?? Am I right?

    Reset the SMC Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support and NVRAM How to Reset NVRAM on your Mac - Apple Support and try a Safe Boot OS X: What is Safe Boot, Safe Mode? - Apple Support

  • Pus the power button only the fan go on ENVY 23 Touchsmart

    Wnem I pus the power button only the fan gos on and the back power light is on and it go off only I unplug the power cord. The computer don't turn on. I tryed to unplug and pus the power button for 10 sec, but the nothing. Somebode can tell me what is can be/Thanks

    Hello , Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I have read your post on how your computer fan goes on, but the rest of the computer will not turn on. I would be happy to assist you in this matter! To correct this issue, I recommend following the steps in this document on Screen is Blank after Starting the Computer. This should help to fully power on your desktop computer, and restore the video signal to the display screen. If the issue continues, please contact our technical support for further assistance in this matter by clicking the link below to get the support number for your region.
    www.hp.com/contacthp/
    I hope this helps!
    Regards

  • My Pavilion a6417c The 'power button' light never illuminates. The fans all run at full.

    My Pavilion a6417c the 'power button' light never illuminates.  The fans all run at full. The only way to turn it off, is to unplug the Power Cable from the PSU.  The system does not boot.  If the PC is unplug for more than a week, it will boot.  But after 5 minutes it will turn off. 
    Eugenio

    Try a SMC reset:
    http://support.apple.com/kb/ht3964
    What does it show in System Profiler (Information)>Hardware >Power>Battery:
    This is from mine.
    Ciao

  • My Mac book will power up but the apple sign remains in the middle of the screen and a gear turning below it -nothing else happens -can you help?

    my Mac book will power up but the apple sign remains in the middle of the screen and a gear turning below it -nothing else happens -can you help?

    A couple of things to try:
    PRAM reset by holding down cmd-opt-p-r on restart. Hold down the keys until you hear the second startup tone.
    If you have a wireless keyboard, wait until you hear the startup tone, then press the keys.
    http://support.apple.com/kb/HT1379
    Boot into Safe Mode by holding down Shift key on restart. Same timing applies to wireless keyboard.
    Safe Mode takes a while to boot. It will show a progress bar. It will boot to the login screen. Log in, then restart normally.
    http://support.apple.com/kb/ht1455
    Boot into Recovery HD by holding down cmd-r. Same note for wireless keyboard.  Once booted, run Disk Utility and repair Macintosh HD (or whatever you have renamed it).
    http://support.apple.com/kb/ht4718

  • My mid-2012 MacBook Pro has the fan constantly running. As soon as I turn it on. My MBP won't even be hot and the fan is running. How can I fix this?

    My mid-2012 MacBook Pro has the fan constantly running. As soon as I turn it on. My MBP won't even be hot and the fan is running. How can I fix this?

    If you are still under warranty and/or have AppleCare, call them.  Let them deal w/it.
    OOW try the following:  http://support.apple.com/kb/HT1411 Apple Portables: Resetting the System Management Controller (SMC) 

Maybe you are looking for

  • FAQ: How can I create a scrolling gallery of images?

    You can use Flash Catalyst to create galleries, for example a scrolling list of thumbnails that display larger images when clicked. Here are some tutorials that explain how: Create a photo gallery (using list interactions), on the FlashCats blog Crea

  • ADF Menu model does not have shortDesc

    Hello  experts,  in my application I need to support 508 compliance.  I have implemented ADF menu model and noticed that the menu items does not have  shortDesc attribute.   In the structure window when I view  the menu xml file,  I can see accessKey

  • Apple tv updating problem.

    when i was updating my apple tv the power were cut off now the device is not displaying anything also the white light at its front is flashing. can anyone help me ?

  • SQL server query output script

    Hi, I have a script to give blocking on the sql server. But i want a script to fetch the output of my server blockings and send me a mail. Please give me some scripts to do this operation. Regards, Vinodh Selvaraj

  • Use a valid email error when logging at app store for first time

    I bought a mac mini 2012 and created my apple ID with a gmail login... all good, verified email at gmail, and i am even logged right now with this ID, except that: when i try to download or update from app store a message "you must chose a valid emai