IBook Won't turn Off.

Yes, Werid, But My iBook G3 won't turn off. When i Go and click on the apple To "log off, Restart, Sleep Or Shut down" The menu closes and The computer Stays on and does not shut down. I then force Quit all the Programs Runing, And tryed to shut down again, No shut down.
I have to Press and hold the power button And hold it til' it shuts down or Remove the Battery.
I know this is not good for the Hard Drive so I run Safe Boot Regerly, But I really what it to shut down again.
Can anyone help me?
iBook G3, 128MB RAM, 30GB HD,12"in.,800MHz, Dual usb, 10.3.9

Do you have to use Force Quit to quit applications? Can you quit applications normally (from the Menu Bar contextual drop-down or using Command + q)?
Do you still have your OS 9 startup volume? If you're not sure, go to System Preferences > Startup Disk and see if it shows up as a startup option. If it does, select it as your startup disk and shut down. Then start up in OS 9 and see if you are able to shut down normally from there. (This eliminates the possibility of a hardware problem if you are able to shut down normally in OS 9.)
If you no longer have the OS 9 installation, try creating a new user (System Preferences > Accounts). Log out and log in as the new user. Is the new user able to shut down normally?

Similar Messages

  • Help!  iBook won't turn off!

    A download went terribly wrong and now I can't turn off my iBook. I have a spinning rainbow circle and can't do anything else! Nothing responds. Plus, my iPod is connected and I can't disconnect it. What should I do?

    Hi Joann,
    Try to force quit the browser by pressing command-option-esc and then highlighting the browser and clicking "Force Quit". You can also force quit the Finder the same way. If that doesn't work, hold down the power key until it shuts off (about 5 seconds).
    John

  • IBook won't turn off completely?

    I am new to Apple so please excuse me if this is a simple matter.....
    I find that even after shutting down my iBook there is still some residual power in there (the modem light remains on). This is curtailed by removing the power supply. However this either leaves the battery to run down to zero and cause an "unexpected shut down" or if the battery is removed, the same result. There is no "sleep" light showing which I could maybe understand.
    Each time I restart the computer the date has gone back to 1970 and a report is created to send to Apple.
    Is there a fix or setting I need to apply? I just want to shut down the computer and know it has done just that!

    Hi Philipb01,
    Welcome to Apple Discussions
    Try resetting the PMU (Knowledge Base Document #14449, which covers Resetting Powerbook and iBook Power Management Unit (PMU)); it will not erase the data on your hard drive, but you should read that document throughly. When you says the modem light, you mean the the light in the from of the iBook below the trackpad? Do you ever get a kernel panic (Knowledge Base Document #106227 on What's a "kernel panic"? (Mac OS X))? If you remove the battery it will go dead unless your iBook is plugged in. How exactly are you shutting down? Do you use the Apple Menu > Shutdown method? Do you press the power button and click on shut down? Make sure to leave the display open until the screen goes black. You may be putting it to sleep before it shuts down.
    Jon
    Mac Mini 1.42Ghz, iPod (All), Airport (Graphite & Express), G4 1.33Ghz iBook, G4 iMac 1Ghz, G3 500Mhz, iBook iMac 233Mhz, eMate, Power Mac 5400 LC, PowerBook 540c, Macintosh 128K, Apple //e, Apple //, and some more...  Mac OS X (10.4.5) Moto Razr, iLife '06, SmartDisk 160Gb, Apple BT Mouse, Sight..

  • K7N2 Delta ILSR won't turn off, just restarts

    K7N2 Delta ILSR won't turn off, just restarts.  Every time I click on "Turn off computer" in Windows XP, it shuts down, but restarts again. Could this be OS related, or perhaps Bios related. My other machine, almost identical to this one, except that the other machine has BIOS rev 7.6 and this one 7.2.

    PSUs seem to be yr favorite subject, but I'm afraid this time it's software. I experimented some more as the problem only occured after installing the Nvidia drivers. Comparing the system settings in the device manager before installing drivers and after installing them, reveils that the problem shows up when AGP HOST TO PCI BRIDGE is installed. When killing this item the PC shuts off properly. Unfortunately when turning back on, Windows automatically reinstalls the PCI bridge and I have the problem again. LOOKS LIKE A MSI SOFTWARE PROBLEM !
    By the way I have a PCI graphics board and not AGP in the failing PC (the good one has AGP graphics).
    Now what?
    R.

  • My iPod Classic 160 is in disc mode and won't turn off, itunes doesn't recognize it - ¿how can I make it work again?

    My iPod Classic 160 is in disc mode.  I responds to nothing.  iTunes doesn't recognize it.  It doesn't sync.  I've tried to restore and got error 1429.  Now it just stays in disc mode and won't turn off.  I'm keeping it connected to the charger so it doesn't go dead.  Is there anything I can do to resurrect my pod?

    To get out of disk mode do a iPod Hard Reset.
    Toggle the Hold switch till you dont see the red mark.
    Press Menu and Center buttons simultaneously for about 10 secs till the Apple logo comes ON then release the buttons
    Select your preferred language.
    See this Apple support Article on the 5Rs.
    http://www.apple.com/support/ipod/five_rs/classic/
    If you try to restore and get a1429 error message, read this Apple Support Article
    http://support.apple.com/kb/TS1372
    Good Luck!

  • I accidentally dropped macbook air that was in a book bag. The keyboard is working because I can see the light but the screen is black and it won't turn off. How should I fix this? Please Help ME!!

    I accidentally dropped my friend's macbook air that was in a book bag. The keyboard is working because I can see the light but the screen is black and it won't turn off. How should I fix this? Please Help ME!!
    I tried to turn it off and it didn't work... and I held on to the shift key too and it still doesn't work..
    Please help me..

    Accidental damage is not covered under Apple warranty.  And it seems there is much accidental damage.  Only a Genius Bar tech looking at it can tell how much it will cost to repair.
    Cost to repair will be high, I suspect (though Genius Bar will confirm/deny.
    There is no gentle way to say this sir/ma'am ... someone will need to pay for your friend's MBA repairs.

  • I tried to update the software for my iPhone 4S. It froze, and now won't turn off, or on, or sync.  Any ideas on how to fix this?

    I tried to update the software for my iPhone 4S, 16 GB to the most recent version (8.1?).  I don't know what I was updating from, because I can't access that, but it was whatever was installed on it (I got it about a year ago, so probably 6.something). 
    It froze, and now won't turn off, or on, or sync with my macbook plus, which is what I have always sync'd it to.  (I backed it up and sync'd it right before I tried to update the software.)
    Since it originally froze almost 3 hours ago, it shows a white screen with the apple on it and a line underneath.  When I try to sync with my laptop, it says it needs me to enter a passcode on the phone, which I can't enter because the screen is frozen.  So I'm unable to access the iPhone portion of iTunes.
    I have tried to turn it off, with no luck.  I have tried rebooting my laptop and syncing, but I still get the same result.
    Does anyone know how to fix this?
    I really wanted to wait to update the software, but I was having internet connectivity issues for the past 3 weeks, and Sprint suggested updating the phone's software.
    Thanks in advance for your help!

    Hi NWL1,
    Thanks for the question. If I understand correctly, the iPhone won't update and is stuck. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
    If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
    Thanks for using Apple Support Communities.
    Have a great day,
    Mario

  • TS3274 my ipad won"t turn off. there is a small window with an email text in it and it appears frozen on the screen. How can i turn the ipad off?

    my ipad won"t turn off. there is a small window with an email text in it and it appears frozen on the screen. How can i turn the ipad off?

    Try a reset: Simultaneously hold down the Home and On buttons until the device shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the device back on using the On button. In some cases it also helps to double click the Home button and close all apps BEFORE doing the reset.

  • My ipod touch is disabled and won't turn off, itunes doesn't recognize the device and i can't see the serial number on the back

    My NOSY (now ex) husband did something to my ipod touch and it is now disabled. It was dead and I charged it and NOW the sucker won't turn off. When I connect to itunes i see a message that says i have to UNLOCK it with a passcode. I tried to get apple support but they want my serial number. Well...the ipod wont turn on!!! I've had it at least 6 years and have moved and I can't find my paperwork and WHO can read that serial number on the back? I know its kind of outdated (third generation, I believe)but its mine, I love it and it has ALL my music on it.

    Disabled
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes       
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

  • HP Color Laserjet 3550 - the "attention" light won't turn off

    I've tried everything I can think of for weeks but I can't get the "attention" light on my HP Color Laserjet 3550 to turn off.  It originally came on when a page on from the manual input tray got stuck maybe 20% of the way in.  It was a real easy fix,  I pulled the page out and now the "attention" light won't turn off.  So I can use the printer at all.  I've had this printer about a year. I purchased it used.  I've always had the manual feed tray as the default because I use this printer mostly for envelopes and less than 81/2 x11 printing as I have an old workhorse HP 4+ for all my straight 81/2 x 11 printing. I've rebooted. I've unhooked cables and the router.  I've opened up the printer and removed the casing (the plastic apparatus on the door)  and replaced it. The router is a 2Wire HomePortal 1800HG.  I'm just baffled here I've printed so much with the manual feed tray and I've had allot worse things happen that I've had to fix.  Now a simple stick like this and the light just wont' go off.

    ShlomiL wrote:
    HI Vern,
    Where did you bought the printer? may you bought it from a different region than your current one?
    What is the exact cartridge number of both the black and the tri-color ink cartridge, as well as their product number?
    I bought the printyer in the US and the cartridges also came from the US,  probably no the same state.  Cartdridge # 97,  black # 96.  I don't see a product number.  This is the same # that was in the printer before and the same one I always used.   As soon as I pull it out the light goes out,  and on again as soon as I install it.  This is before the printer even cycles through it's "new cartdridge" routine,  if you know what I mean.
    thanks for the reply

  • My Screen Saver won't turn off on my I-Mac. Is there a way to fix this?

    I have an I-Mac that every once in a while won't turn off it's screen saver when I move the mouse. I can see the mouse move and switch to the screen with the caculator, but I am unable to get the screen saver to stop and view the screen proper.
    It has been updated with mavericks, but was doing this before the update. It's set to update on a weekly basis, so It should be good in that department.
    so far, any suggestiosn I have been able to find haven't stopped this from happening. i'm looking for a way to exit out of the screen saver.

    Have you tried going to System Preferences/Desktop & Screensaver/Screensaver, and choose "Start after Never"? That turns off the screensaver. Then, under System Preferences/Desktop & Screensaver/Desktop, choose the image you want. You can vary the sleep by playing around with System Preferences/Energy Saver, and playing around with your preferences.

  • As i turned on my iphone 4s on and connected to a wireless internet a page opened from the app firewall ip and i usually choose all connections. so it got stuck i held the standy by button but it won't turn off. so i held the standyby and home buttons.

    As i turned on my iphone 4s on and connected to a wireless internet a page opened from the app firewall ip and i usually choose all connections. so it got stuck i held the standy by button but it won't turn off. so i held the standyby and home buttons. when it opened all apps music and pics where not there. why? then i enterted photos and the loading logo appeared then the standyby appeared and i entered my password and everything in my iphone was there but thing were scattered and apps wheren't in folders everything was messed up but no photos or music AND IT SAYS UP IN THE MIDDLE OF THE SCREEN EXIT SAFE MODE. so i restarted it again and it opened and nothing was there and again i entered photos and the samething happen again. why did this happen? and can i get my data back? and in the usage it says that these thing are there but not showing.

    stevejobsfan0123 wrote:
    The Find my iPhone service option is given to you when you first set up the device. If you just reset it, you may have been given that option. So, in other words, the service may have been enabled even if you didn't realize it. You can then go to www.icloud.com and click on Find my iPhone, and have it play a sound. Or, you can use the Find my iPhone app on your mom's iPhone, but the service would still need to be turned on on your iPod.
    Unlike Compukid said, Apple will not assist in locating a lost device without the Find my iPhone service.
    I found that out 2 years ago, it's just that I thought Apple might have changed that.

  • My Ipad2 won't turn off.  I've tried the reset method,  holding both buttons down for at least 10 seconds, but this doesn't work. I'm on version 5.1.1 and all other functions work except that I cannot get onto the internet via wi-fi either.  Help ??

    My Ipad2 won't turn off.  I have tried the reset method by holding both buttons down for at least 10 seconds, but this doesn't work.  I can't get onto the internet via wi-fi either (don't have a 3G card fitted).  All other functions seem to be working OK including charging. Not had this problem before, but I recently upgraded software to 5.1.1 so is there a bug in there somewhere?

    Look at last link.
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130?tstart=60
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • My macbook pro keyboard backlight won't turn off, even after pressing F5

    my macbook pro keyboard backlight won't turn off, even after pressing F5

    Try resetting the  SMC http://support.apple.com/kb/ht3964

  • I reset my 3Gs, but now all I get is the Apple icon. It won't turn off or anything. Is it bricked? What is bricked? How do I fix it please. Can anyone help me please.

    Hi, I've just appear to have deleted my iphone and now all I'm getting is the Apple icon.
    It won't turn off or anything. I have tried holding in the off button and home button together,
    but the icon goes and comes back again. It won't connect to Itunes, as the device is not showing
    up. Can anyone HELP PLEASE. I think I need to reload Iphone back onto the device.

    Try to force your phone into recovery mode. Disconnect it from the computer's USB cord. Turn it off if you can by holding the sleep/wake switch until you see the red slide to off. If you can't turn it off, please continue. Press and hold the home button while plugging it into the computer's USB cord. Continue holding the Home button while iPhone starts up. While starting up, you will see the Apple logo. When you see "Connect to iTunes" on the screen, you can release the Home button and iTunes will display the recovery mode message.  http://support.apple.com/kb/HT1808
    Then you can restore your phone:  http://support.apple.com/kb/HT1414

Maybe you are looking for

  • Purchase order report -help needed.

    Hi guys, Can anyone help me create a report for the purchase orders (similar to ME2N) ,my company needs all the info related to a PO like payment history.we need to pull all <b>closed POs</b> during a certain time period.Is ther a way todo this . I'd

  • Color a specfic text view in a table dynamically

    Hi , I have got a SFLIGHT table display , According to the Flight Number I want to change the color of textView in that table . How should I do ? I have followed teh following steps : Created a Attribute colorCode of Type WDUI_TEXTVIEW_SEM_COL . Then

  • Attempt to print to Acrobat from IE fails/locks up

    I print from IE to Acrobat to create a PDF. Sometimes I fail to notice that the document in IE is already a PDF. When that happens, the dialog box for selecting a file name to print to comes up, but it's locked up and nothing can be entered. So far I

  • Urgent request - TEXT_IO package

    Hi people, I'm in the process of converting one of my client's corporate reports to an Excel format, using the "TEXT_IO" package. The client requires his logo to appear in the Excel file (for a purely aesthetic purpose). I've tried - to no avail, mig

  • SCHEMA NAME

    Hi, I have installed SAP Netweaver 2004s on Oracle 10g, windows 2000 server. I want to know the schema name. Can  you guys help me how to find schema name. Thanks, Chakri