IBooks 1.3 , automaticly start audio / video

Hello,
after the update iBooks to version 1.3 i have the following problem. If i start the app and choice the Book "Säulen der Erde" the app plays the audio or video part of the book directly. So every time i open the book i hear the sound. This is terrible. Next problem, and this is for me the biggest problem: normaly i use the App Radio in the background (i listen to my favorite radio station). After the update to 1.3 the radio app stops after opening the iBooks app.
What can i do ? I don´t find any settings on the iPad to cancel this situation.

Unless you have the 5G iPod, TV out only works for apps that support TV out. The Video app is one such app. If you have a 5G iPod TV mirrors the iPod's screen unless the developer turned off that feature. Also, the dock has to accommodate the Lightning connector since the Lightning to 30 pin adopters do not support video.

Similar Messages

Audio, video, and screen sharing problems

I use video chat all the time. When I first got my computer my ichat had some bugs, but I thought they were worked out. Then one day, out of the blue, a few days after I upgraded to Leopard, I can no longer start audio/video chats or share screens with my friends who also use Leopard. I've read just about all of these posts with the same problems. Internet sharing is off, and my bandwidth limit has been set to every number on the menu. Anybody got any ideas? I'm about to toss this thing out the window!

OK,
If you have reset the Mac Firewall since doing the 10.5.1 update then good.
If this used to work in Tiger but does not in Leopard we have to consider the fact that iChat 4 in Leopard uses the same port to send and recieve Audio and Video whereas in Tiger iChat 3 used 4 ports.
This can bump into "Security" features that you router or modem may have.
What makes and models devices do you have to connect to the internet and what have you done to set them up ?
7:58 PM Friday; January 25, 2008

When I insert an audio CD into my iMac, it automatically starts playing

When I insert an audio CD into my iMac, it automatically starts playing, and I can't figure out why, nor how to stop this behavior. When I click in the upper right corner of my screen where it says "Finder", it shows the Finder as the only application running, and yet SOMETHING must be causing the CD to play. If it is an Extension that is being loaded, is it possible to terminate the Extensions one by one without restarting the computer to see which one is playing the CD?
Is the OS9.1 operating system supposed to automatically play audio CD's when they are inserted into the iMac? Or could it be an Extension that is doing it?And if so, why is no means provided to actually CONTROL the playing of the CD (such as a control panel with PLAY, STOP, SKIP, etc. buttons)?
On a PC, I can press Control/Alt/Delete to bring up the "Task List" that will show me ALL applications and processes currently running, and then terminate apps and processes one by one without having to restart the computer to see which one is playing the CD. Is there an equivalent way to display this information on an iMac that will show me which application or process or extension might be causing the audio CD to play, and allow me to terminate them one by one without restarting the computer until I can see which one is the "problem"?
Jerry

Hi, Jerry -
Welcome to Apple's Discussions.
Finder uses QuickTime in the background to do that, hence no specific app is shown in the Application menu (the far right item in the main menu bar) in addition to Finder.
To unset automatic playing of CDs (and DVDs) -
Open the QuickTime Settings control panel (Apple menu > Control Panels > QuickTime Settings).
In that control panel, select AutoPlay from the pulldown menu in the control panel. Uncheck both the items shown in the new window. Close the control panel.
No restart should be needed in order to make the change effective.
Doing this will also guard against the (now ancient) AutoPlay virus, which could still be lurking somewhere on the net.

How can I prevent videos from automatically starting when I load a web site?

Recently web sites have begun not only showing me the first shot of a video, but starting the video automatically when the page loads (or when I scroll down to the part of the page where the video is located). This happens on various news sites (nytimes.com), facebook, and other places. How can I prevent the autostart from happening?
I've got AdBlockPlus and NoScript enabled, although I whitelist many sites in NoScript. Videos used to wait for me to click an arrow in the middle (like a "play" button) to start; some still do, but most don't. (I believe an add-on is responsible for the play button, but I don't recall which one.)
Any suggestions?
Thanks.

The chosen answer is not an answer at all.
The question remains unanswered: How does one prevent unwanted video content from playing automatically on web websites? The problem is most notable on news sites such as ABC News.
It is really, really, really really really, really, really, really really really, really, really, really really really irritating. More irritating, in fact, than when people cut and paste a word a dozen times to emphasize it.
MORE IRRITATING THAN WHJEN PEOPLE USE ALL CAPS OUT OF FRUSTRATION BECAUSE NO ONE SEEMS TO LISTEN OR TO CARE THAT I AM SLOWLY LOSING MY MIND BECAUSE EVERY FLIPPING WEB PAGE IN EXISTENCE PLAYS VIDEAS THAT I DON'T WANT TO WATCH.
More irritating than repeatedly stating the same thing over and over and over and over... wait. I already illustrated that tautology. Never mind.
Does anyone have an answer? If there is no answer, and the powers that be at Firefox have decided that we have no choice, then state so. If those who decide what HTML "is" have decided that individuals have no power to opt out of video content on any given web page, then say so.
If Obama is to blame, then say so. If Bush is to blame, then say so.
But don't say, "the web [page may be using HTML 5 to play video" because THAT is a NON-ANSWER, let alone the "best" answer.

I am trying to download video that i purchased from itunes, but everytime i want to resume the process after pausing it, it automatically start the whole downloading process again, how can i eliminate this problem?

i am trying to download video that i purchased from itunes, but everytime i want to resume the process after pausing it, it automatically start the whole downloading process again, how can i eliminate this problem?

They don't normally appear in the download screen ... until I attempt to download another movie. Then they just start appearing. If you click edit - a normal movie download has a circle that appears on the left hand side that allows you to select and delete ... these movies don't have that option so you need to find the movie in you list (under movies) and select the download cloud symbol again to stop it downloading ...you may need to do this a number of times before it stops for a while ... or until you try to download a movie then it starts all over again.
i have logged out of my itunes account. restarted the iPad, removed all movies, restarted the iPad, logged back into my iTunes account and restarted my iPad .... but as soon as I tried to download a single movies ... the other movies started appearing in the downloads again.

My quicktime player won't play any videos on my Mac X os. The video will start on quicktime then automatically start

My quicktime player won't play any videos on my Mac X os. The video will start on quicktime then automatically start. I installed DiV X today and all this happened is there anyway to fix this?? I went through everything dragging the icon to the trash and deleting it from safari extentions.

Download and install
Perian from http://perian.org/
You should read this support page http://perian.org/#support in case you need to delete older codecs. In Macintosh HD/Library/Quicktime/ delete any files relating to DivX (Perian already has them), particularly any DivX extension to Safari. However it should be noted that Perian is not an internet plugin and will not play DivX files imbedded on a website. For that you will need the DivX Player browser plugin available from http://www.divx.com/en/software/mac Note that Perian will be discontinued after the release of Mountain Lion: http://reviews.cnet.com/8301-13727_7-57434082-263/perian-plug-in-for-quicktime-t o-be-discontinued/?tag=txt;title

YouTube Videos on Safari automatically start to reload once iMAC is logged in

Hello there,
I have an issue bothering you since I upgraded my iMAC to Lion OS, hope you can help.
Well previously when I had Snow Leopard as my OS, I could open Safari & view Youtube videos & in fact could have many Tabs in a Safari window, each having a unique YouTube video. Once I finished watching the videos, they could stay there if even the system logged out or went to sleep ... and when I would re-login all the videos which were completely displayed would remain there & I could watch them rightawat again without having to reload them from Internet. Since I upgraded to Lion, whenever I view YouTube videos in Safari (one unique video on each tabbed page), they would remain there until the system remains logged in ... however if the system automatically logs out (due to prolonged in-activity) or goes to sleep and when I re-login then all the videos which were viewed already would automatically start to reload again.
This is really frustrating, can you please guide if its some configuration issue? I reckon the videos which once gets into Safari cache should remain there (as was the case in Snow Leopard) but apparently Safari initiates a fresh reload once the system is logged-in & unnecessarily starts downloading vides again.
Can you advise the solution?
Thanks.
MSZ

Nevermind. I gave up and moved to Chrome. Having a much better time now, no worries.
But hey, if you want to answer this question for anyone else that might have this problem, then by all means go ahead.

Youtube video automatically starts in facebook if i open my album

if i play and stop youtube video in facebook and then if i open my picture album youtube video automatically starts playing the video

Troubleshooting extensions and themes
* https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes
Restore the default home page
* https://support.mozilla.com/en-US/kb/How%20to%20set%20the%20home%20page#w_restore-the-default-home-page
Check and tell if its working.

How do I fix my audio/video in iChat 4.0.9? it has worked perfectly until last night.

How do I fix my audio/video in iChat 4.0.9? it has worked perfectly until last night. I have been having video calls iChat with my granddaughter for 4 weeks. All of a sudden last night I wasn't able to complete the video/audio. We were able to iChat with writing. The message I got was to go to connection doctor.
The error log -
2011-04-24 19:33:43 -0400: No data has been received for the last 10 seconds.
Audio channel info: local machine using 10.0.1.2:16402, expecting remote machine to send to 69.138.244.124:58521
Video channel info: local machine using 10.0.1.2:16402, expecting remote machine to send to 69.138.244.124:58521
Every time we tried to connect I got the same error message.
I use an airport extreme - my granddaughter has some kind of wifi - but the error was on my side not hers as she connected to her friends.
Please help.
Thank you.

Hi - I have a cable modem from comcast.
I am not sure I understand all your questions, suggestions - so I will copy what I have when I go into the airport utility under internet.
Do you have four tabs (You may have less) I HAVE 4 TABS
In the First tab what does it read at the Bottom ? AT THE BOTTOM OF THE FIRST TAB (INTERNET CONNECTION) IT DOES SAY "SHARE A PUBLIC IP" WHEN I LOOK AT THAT SETTING - I COULD CLICK INSTEAD BRIDGE MODE OFF, OR DISTRIBUTE A RANGE OF IP ADDRESSES. BUT FOR NOW THE ONE THAT IT IS ON IS THE SHARE A PUBLIC IP.
"Share a Public IP" ?
Or "Bridge (Off) Mode" ?
I DON'T UNDERSTAND WHERE TO LOOK FOR THE INFO BELOW. I ALSO HAVE UNDER THE INTERNET CONNECTION TAB - CONNECT USING ETHERNET AND ETHERNET WAN PORT AUTOMATIC (DEFAULT)
THE 2ND TAB IS TCP/IP AND THERE IT LISTS CONFIGURE IPv4: USING DHCP
IP ADDRESS: 69.138.244.124
SUBNET MASK 255.255.248.0
ROUTER ADDRESS 69.138.240.1
DNS SERVER 68.87.73.246 AND 68.87.71.230 (THESE ARE FILLED IN THE BOXES AND NOT CHANGEABLE.
THE 3RD TAB IS DHCP
DHCP BEGINNING ADDRESS 10.0 .1 .2
DHCP ENDING ADDRESS 10.0.1.200
DHCP LEASE IS 1 THEN DAY
4TH TAB NAT
CHECKED IS ENABLE NAT PORT MAPPING PROTOCOL
I HAVE BEEN USING THIS AIRPORT EXTREME FOR AT LEAST ONE YEAR.
THE ONLY DIFFERENT ISSUE IS THAT I HAD BEEN TRAVELING AND USED MY DAUGHTER'S AIRPORT EXTREME LAST WEEK. I HAVE NO IDEA ANY OF THAT INFO - BUT I DO KNOW THAT THE AIRPORT EXTREME LISTED IN THE UTILITY IS THE ONE AT MY HOME THAT I AM WITH NOW.
THANK YOU FOR TAKING THE TIME TO TRY TO HELP ME. I REALLY APPRECIATE IT.
JUDY
Between that drop down and the tabs should be the info on how it connects to the Modem.
It may list that Puiblic IP.
It may list another LAN IP (one from the Modem)
Does it start 192.168....
Or 172.16 (or up to 172.32....)
Or possibly another 10.... number ?
If the modem is issuing IPs to the LAN there are two things that can effect things
One is the fact the computer gets two IPs (even though the mac can only display one)
And If you used Port Forwarding in the Modem the Place (IP/Computer or device) that it was pointing to may not be the Airport Base Station any more.

Problem with audio configuration that affects audio/video playback

Recently, when I watch video on i tunes that sound and picture to not match up. Sound seems to be on-time but the picture is jerky and behind. I un-installed my video driver and reinstalled. Problem persisted. I started my computer in safe mode and it said there was a problem with the audio configuration that effected audio/video playback. I uninstalled i-tunes and re-installed and the problem still persisted. I'm at my wits end and it is driving me crazy. Windows Vista is automatically updated so that's not the problem. Please help.

Have you had a chance to look at this troubleshooting page? It may be of some help: iTunes for Windows: iTunes has detected an audio configuration problem

How to stop auto play on importing audio/video

I am so sorry to post this question. I've seen it many times around on internet, but it is driving me ABSOLUTELY MAD. After importing audio/video on iTunes (plus copy into iTunesLibrary), the file automatically starts playing. It is annoying me more and more, I can not seem to turn the function off. iTunes seems to be defaulted nowadays to start autoplay after importing music or video into iTunes~?
Please someone, where can I turn this function off????????????
thanx for your help. But honestly, with iTunes I don't expect there is a solution. I hope there will be good software available in future OS-versions.
Rudi

Hey tt2 and Chris!
Uhm...you both talk aout the actual folder 'automatic add to iTunes'? So, have to look that up tomorrowmorning. It is an actual folder in my iTunes media folder???
I don't get it. I thought by checking the box in preferences (automatically add to iTunes) that it makes a copy of the file that I wanted to add and place it in my iTunes library. Then I throw away the original which I dragged into iTunes.
So, i understand that is not the way to add files?
But dragging into the folder 'automatically add to iTunes', does that mean that there are more than one copies of a file after adding? Meaning...one in the 'automatically add to-folder' AND in the library? I only need one file....otherwise I wind up with several duplicates. Just one in iTunes library will do fine for me. There is backup elsewhere for files i need to keep....
But anyway...thanx for the tip. Will try this tomorrow, search for the automatically add to-folder and let you know!
Rudi

Separate Audio/Video Question

I'm in the midst of transitioning from iMovie/iDVD to Final Cut Studio. In the last chapter of FCP6: Beyond the Basics, I sent a sequence to Compressor and generated an Audio file and a Video file. The book didn't really say anything about what happens next. I tried it with my first FCP video, (which I had previously simply exported as a QT file and dropped into iDVD, and as I write this I can see that it processing a Dolby Digital file and an MPEG-2. Admittedly, I haven't cracked the book on DVD Studio Pro yet, in fact, I haven't really opened the app except to glance at the interface, and my question will probably be answered there, but what's going to happen next. When I open up DVD Studio Pro, will I be selecting both of these files for the project and then they'll just automatically sync?

Hi, and welcome to the Palm Community Forums.
Let's keep this thread focused on the dialing issue, and I suggest you take up the picture/messaging issue in a separate thread in the Audio, Video and Photos board.
First question is whether the phone has behaved this way from day one, or if it just started after working correctly for a few weeks. You could try soft-resetting the phone...remove the battery and wait a minute, then reinsert, start it up and try again. If that doesn't work, a Hard Reset might be in order, which wipes everything clean and lets you start over. This can correct issues relating to corrupt data or conflicting third-party applications which may have found their way onto the Centro. This article discusses the various types of Reset for different Palm devices.
After the Hard Reset, do not synchronize the phone with your desktop. See if the phone works normally.
Another issue might be a bad SIM card, but I don't know enough about that...the folks at the AT&T store should be able to verify whether the card is good or not.
If all else fails, return it to your AT&T store for a replacement. AT&T has a 30-day return policy for any reason.
Good luck, please let us know how it turns out.
Post relates to: Centro (AT&T)
Message Edited by smkranz on 08-15-2008 09:49 AM
smkranz
I am a volunteer, and not an HP employee.
Palm OS ∙ webOS ∙ Android

IDVD 08 audio/video sync drift toward end of DVD movie - fix/workaround?

Anyone know how I can fix this issue? It's driving me crazy.
I've just spent a few evenings in iMovie 08, editing together the video of my son's birth. All looked & amazingly good in iMovie. The "Large" .m4v file output by iMovie - Shared with the Media Browser - plays perfectly in Quicktime too.
However, after adding that shared movie to iDVD 08, and burning a DVD, I noticed that the audio sync drifts toward the end of the Movie when plated back. At the start of the DVD all seems well, but by the end of the ~1hr 20 minute movie the audio is unbearably out of sync with the video. Completely unwatchable.
After a little Googling I came across some reports that iDVD might not deal well with video that's been recorded with 12-bit audio. I've confirmed that my camcorder is (was!) set to 12-bit rather than 16-bit (the default, I'm sure). So if that's the problem I'm hosed... it's not like I can get a retake on that footage
Is there a reasonable workaround for this issue? I'm obviously unable to re-take the video (or the other 10 hours of DV video tape I've yet to use in an iMovie project). Ideally I'd like Apple to release a patch for this. Shouldn't it be possible for iDVD to account for audio that was originally recorded in 12-bit... even if it's just a checkbox you have to select to tip it off?
Then again, perhaps this is totally unrelated to the 12-bit issue, and this is just a run of the mill bug?
As I said... iMovie generates a MPEG4 video file of the Movie that looks/sounds perfect, so it seems this sync issue's being created somewhere in iDVD as it's rendering the audio/video to burn to the DVD...
Thanks in advance.

I've tried most of the options I can think of, and the audio sync drift issue continues on this ~1hr 12 minute iMovie/iDVD 08 project.
A couple of promising ideas tried used QT Pro, to export the audio track from the iMovie generated MPEG-4 file - as a WAV file, resampling to 48kHz and 16-bit... then Adding this back to the video track in the MPEG-4 file (having deleted the original audio track). In another test I also tried the Add to Selection and Scale option. Oddly enough I think the Add to Selection and Scale attempt generated more sync issues than before in the final DVD movie... so I stuck with the MPEG-4 file containing the video track and the added, resampled at 48kHz & 16 bit, WAV audio track.
This was saved as a self contained Movie file, producing a QT .mov file. I moved this .mov file into the iDVD projects directory structure so that it was avalable in iDVD's Media Browser. I then reworked the iDVD project to use this QT large.mov file, instead of the original iMovie large.m4v file.
As a reminder... the original large.m4v file has the following properties:
29.97 FPS H.264 Decoder, 960 x 540, Millions
AAC, Stereo (L R), 44.100 kHz
0:01:12:07.16 duration
The resampled and saved QT MOV file has the following properties:
29.97 FPS H.264 Decoder, 960 x 540, Millions
16-bit Integer (Little Endian), Stereo, 48.000 kHz
0:01:12:07.16 duration
BOTH versions of this Movie file play flawlessly within QT Pro... there's no audio sync drift evident toward the end of the movie unless I use iDVD 08 to burn either movie file to a Physical DVD (or DVD Disk Image). In both cases the resultant DVD Movie exhibits significant audio sync drift as the ~1hr 12 minute movie progresses. The sync goes out by ~ <= 1 second based on a rough visual assessment.
I've not yet tried to burn either the original iMovie produced MPEG-4 video file or my QT Pro tweaked audio track .MOV file version to a DVD on my PC...
... But I have used an application called Burn (referenced in this earlier/archived iDVD sync drift forum post: http://discussions.apple.com/thread.jspa?threadID=1332100 by user F Shippey - http://burn-osx.sourceforge.net/) to take the QT Pro tweaked .mov file version of the original MPEG-4 file and burn it to a DVD...
Results:
The Burn app burnt DVD plays with NO audio sync issues!... Even though it was generated from the same audio tweaked (48kHz/16-bit resampled) QT Pro .mov file.
However, whenever I burn a DVD using iDVD 08 the audio sync gradually drifts. It matters not whether I use the original iMovie 08 generated MPEG-4 movie file, or the QT Pro version of that file with the resampled audio track (the same one that works fine with Burn).
It sure looks to me like iDVD has a problem... Again, refer to http://discussions.apple.com/thread.jspa?threadID=1332100 for someone else who seems to have run into similar challenges.
Am I overlooking something?
Thanks in advance.

Audio / video sync issue in playback

for every recording i've made, when i play back the archive there is noticable lack of sync between the audio and the person's mouth. the video seems to lag behind by almost a second. the good news at least is that the delta is constant.
has anyone else experienced this? it's happening in any scendario i try, even if i'm just recording myself.
is the LCCS dev team aware of this? since audio and video streams are recorded separately, is there any way for me to programatically 'nudge' the streams into sync?
it's currently a show stopper, it looks really bad when the sync is so obviously absent.

finally getting back to this..
i did as you suggested and recorded a video of myself using the recording and playback examples provided with the SDK (the 2.2 newest version btw).
the de-syncing of audio and video is definitely there. it seems especially bad for longer recordings. however, an interesting thing i discovered in playback:
- sometimes, if i drag the playhead somewhere in the recording, pause, and then hit play, video and audio fall into sync.
- if i start playback from the beginning of the recording, audio/video is always out of sync.
i understand that the video and audio streams are recorded separately and thus played back separately. my guess is that when those streams are retrieved and playback begins, one starts before/after the other because they're not retrieved at exactly the same time. it seems some extra work is required to ensure that their playback commences at exactly the same timestamp within each stream.
i can provide my recordings as an example if required.
this is a total showstopper for me. it renders the entire recording service useless if the playback can't have sync between audio and video. i would be happy to help with testing this more. can someone from the LCCS team comment on this issue?
thanks
adam

I am using ALSA and Icecat. When I play any html5 audio/video it works, but the next time i click on another audio/video link I lose sound.

I am using Parabola (a fork of archlinux), Icecat 31.4 and ALSA
Icecat and firefox seem to hold onto the soundcard when I click on a new html5 audio/video link in the same tab. The next video/audio element loses sound. If I wait 10 seconds and click back to the start of the audio/video, the audio returns. I often get cpu spikes for icecat when it happens.
I have tried this with both motherboard and usb sound and I get the same problem. I have disabled extensions (addons) in Icecat, deleted profiles, reinstalled the browser and even installed firefox from the AUR and it still occurs.
I have disable gstreamer in about:config and restarted and it still occurs.
My .asoundrc is this:
pcm.!default {
type plug
slave.pcm "hw:0,0"
All my other audio applications work. I have noticed that if I use pulseaudio it fixes it, but it should work without anyway, like it used to. I think something happened after an update, but I'm not sure.
Any help would be appreciated. I know it's not a big problem, but it's really frustrating and I've had it for ages. I even switched browsers to get away from it.

*nerding out*
I am not an expert in this and if we get stuck I have found a mailing list for the alsa project that can be contacted: http://www.alsa-project.org/main/index.php/Mailing-lists
Gstreamer is disabled in Firefox as well as the os?
Since you are seeing issues with ogg files and moving video/audio combination I started to dig into file formats {sox http://sox.sourceforge.net/soxformat.html}
For ogg would the file format affect the "raw"?
defaults.pcm.file_format "raw"
Updated libraries
alsa-lib-1.0.6-8.FC3
alsa-utils-1.0.6-3
No no, here:
http://oss.sgi.com/LDP/LDP/linuxcookbook/html/cookbook_27.html#SEC377
Is the OGG cpu intensive for your alsa architecture? [http://alsa.opensrc.org/Ogg]
Troubleshooting sound on Linux to narrow down the issue: [http://www.troubleshooters.com/linux/sound/sound_troubleshooting.htm#the_steve_litt_diagnostic_tools]
References: [http://www.alsa-project.org/main/index.php/Minivosc]
[http://www.troubleshooters.com/linux/sound/sound_troubleshooting.htm#the_steve_litt_diagnostic_tools]
I am sorry, this is where I can no longer help. Please seek the guidance of the Linux forums or that alsa mailing list.

IBooks 1.3 , automaticly start audio / video

Similar Messages

Maybe you are looking for