IBooks isn't reading ANY cds

Able to open cd drive properly (for a change), however iBook isn't reading disks. Doesn't even make the spinning sound like it's trying to read. I just close the drive and nothing happens. Any suggestions??? Thank you.

when you open a Finder window does the CD show up there? If so, can you click on the cd and see a list of track names? Try right clicking on a track and scrolling down to "Open With" and choose "iTunes".
Another thing you might try.. open a finder window. click on View and scroll down to View Options. Make sure "Show Preview Column" is checked.
If the CD does show up in preview and you can see track names when you click on it, you should get a mini player in the preview column. try playing it there.
Try this too. In Finder, on the menu bar click on Finder. Scroll down to Preferences. Click on General. Where it says "Show These Items On Desktop", make sure CD's, etc. is checked. Does your cd show up on your desktop?
Then there's always the old standby.. create another user and then log in as that user. can you play the cd there?
You wrote that you were able to open the cd drive properly "for a change". I take it you've had problems with that. I'm not a mac guru but it sounds like you might be having cd drive problems. I'm not real sure how to fix that.
If none of these suggestions pan out then you might try posting this message in the Mac OSX 10.3 area. The ibook dual usb area doesn't seem to get as much traffic. Or, even though you don't have a Mini, you might try posting it there. Lots of basic OSX discussions there.

Similar Messages

  • IBook won't read any CD/DVDs...

    All of a sudden my iBook does not want to read any CDs and DVDs... it would not even read the Installation CDs... two days ago was just fine - i burned CDs without a problem whatsoever...
    When I insert any type of CD either it spits it out after a few seconds, or keeps trying to read but nothing really happens...CD image does not appear on the desktop. Feels like it is trying to read it but it cannot.... could the problem be that it needs cleaning?
    I know it's hard to say like that without even looking at it, but I would appreciate any opinions...

    Hopefully the optical drive hasn't failed; hard to say if some procedure
    could help restore use of the drive. A dirty optical drive may have some
    thing to do with the problem; but even so, a disc should mount unless
    the drive has gone bad. It may need cleaning, or replacement.
    Not sure if there is a software possibility involved in this situation; since
    it seems to me to be a hardware problem. Maybe you will have to think
    about getting an estimate from some reputable specialists who do 'out
    of warranty' work; unless you have an active AppleCare Plan in effect.
    Then, if you do, a call to Apple would be in order. Best wishes.

  • IMac G5 won't read any CDs but DVDs work fine

    I have an iMac G5 with a PIONEER DVD-RW DVR-K04L drive
    and firmware revision D441.
    Just recently it stopped accepting any CDs (commercial CDs, software CDs, blank CD-Rs). It buzzes and grinds and groans and then spits them back out, but refuses to mount them. The only exception is the Apple OX Installation CD that came with the machine - that one works without a hitch. DVDs play fine and I can burn to blank DVDs. The problem is only with CDs.
    I've tried suggestions from the forums:
    - reset PRAM and NVRAM
    - trashed com.apple.kernecaches, Extensions.kextcache, and CD Info.cidb and then rebooted
    - fixed permissions
    - verified disks
    Not sure what else to do - but I would appreciate any suggestions - since it reads the Apple installation CD, does this mean it's not a hardware problem but a software problem?

    You will need to take it
    to your local Apple Authorized Service Provider and
    have them take a look at it. Hopefully your iMac is
    still under warranty or AppleCare.
    Thanks for the reply.
    Is it possible to install a replacement unit on my own - or is this definitely not a do-it-yourself type fix? Also are there more reliable internal dual layer DVD/CD burners than the one the iMac G5 came with?
    If I decide to simply plug in an external burner, are the external burners compatible with iLife 06 (iDVD and iTunes)?
    Thanks.

  • My disk player isn't reading any disks

    My Pro has stopped reading any disks.

    Have you tried cleaning the lens?  Use a lens cleaning DVD or a fine microfiber cloth (eyeglasses cleaning cloth) wrapped around a business card gently inserted into the slot.
    Ciao.

  • Installed iTunes and now my pc won't read any cds-PLEASE HELP!

    Anyone have an answer for this? It won't recognize anything...audio cds, cd-roms, nothing. If I go into my computer, the cd drive isn't even listed on there.

    Sorry, was at work. Ok, here's the diagnostics:
    Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
    iTunes 4.7.1.30
    CD Driver 2.0.4.0
    CD Driver DLL 2.0.2.0
    LowerFilters: PxHelp20 (2.0.0.0),
    UpperFilters: GEARAspiWDM (2.0.4.0),
    Video Driver: NVIDIA GeForce4 420 Go 32M GeForce4 420 Go 32M
    Check the website of your computer manufacturer or video card vendor to verify that you have the latest video drivers.
    IDE\CdRomTOSHIBADVD-ROM_SD-R2512________________1A04___
    Failed while scanning for CD / DVD drives, error 2380.
    Virtual drives can sometimes interfere with reading and writing CDs in iTunes. If this is a virtual drive and you are having problems with other drives, try uninstalling the virtual CD application.

  • My CD Drive (:E) Isn't Detecting Any CDs...

    yup...my PC has 2 CD drives, one for reading only and the other for reading/writing (burning). My first one doesn't seem to work anymore...now, I have to use my :F drive to rip CDs, play games, etc. and burn CDs. Whats wrong with my :E drive??

    Oh woops...CD Diagnostics:
    Microsoft Windows XP Professional (Build 2600)
    Compaq Compaq PC
    iTunes 6.0.4.2
    CD Driver 2.0.4.3
    CD Driver DLL 2.0.3.2
    LowerFilters: PxHelp20 (2.0.0.0),
    UpperFilters: GEARASPIWDM (2.0.4.3),
    Video Driver: NVIDIA Vanta\Vanta
    IDE\DiskST320423A______________________________3.39___, Bus Type ATA, Bus Address [0,0]
    USBSTOR\DiskMaxtor6L160P0_________0000, Bus Type USB
    IDE\CdRomCOMPAQSC-140S__________________________SE04___, Bus Type ATA, Bus Address [0,0]
    IDE\CdRomLGCD-RW_CED-8120B______________________1.00___, Bus Type ATA, Bus Address [1,0]
    If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
    Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
    Current user is administrator.
    E: Unsupported CD or DVD drive.
    Virtual drives can sometimes interfere with reading and writing CDs in iTunes. If this is a virtual drive and you are having problems with other drives, try uninstalling the virtual CD application.
    F: LG CD-RW CED-8120B, Rev 1.00
    Drive is empty.
    The last failed audio CD burn had error code -128(0xffffff80). It happened on drive F: LG CD-RW CED-8120B on CDRW media at speed 0X.

  • Cd-rw 8348A doesn't spin up to read any CDs!!

    I purchased the 48x16x48 CD-RW, 8348A only three months ago... in the past month, I've had this problem:
    Whether I'm in W2K or booted into DOS using W98 floppy, I stick ANY CD into the drive, and it doesn't spin up to read it... It only makes two humming noises spaced about 1 second apart, then the LED turns off, and the drive sits there, looking dead.
    In W2K, when I click on the drive letter, it gives me the message to 'insert a CD into this drive'... like it doesn't know it's there.
    My FIRMWARE is upgraded to 150D. It seems my drive is busted, but it shouldn't be...
    Anyone else w/ this problem? Help!!!
     ?(

    Well, I've got the same problem with the 8348a, no matter what firmaware (now on 150d).
    Using a K7N2-L Mobo with Win98SE or Linux - the drive is seen and correctly identified by the BIOS and the systems, even the nero info tool gives the right specifications. But whenever I insert a CD (audio, data, whatever) which is read by my other drives, the LED simply does some blinks, and that's it. The media cannot be read / drive mounted (under linux) since the drive obviously claims that there's none inserted.
    This persisted when trying all available IDE ports and when installing in my older PC with VIA Chipset. (So my setup is quite different from dandan's. But I don't even get the humming noises.)
    So it seems the drive is the culprit. I'll try to have it replaced...

  • CD/DVD drive won't read any CDs or DVDs

    Whenever I insert a DVD, CD, or CD-ROM my computer won't read the disc. The computer starts making noise like it is reading the disc but then it stops. It tries 3 times (starts and stops) and then just spits the disc out. I can't watch movies, install software, etc. How do I fix this.

    Before taking it or sending it anywhere I'd first try resetting PRAM…
    http://docs.info.apple.com/article.html?artnum=2238

  • TS4062 my iphone isn't reading any of my sim cards

    i have just bought an iphone off of a friend and its not reading my sim card

    Hi Giruzzimaid,
    Thanks for using Apple Support Communities.  If iTunes doesn't recognize your devices, double check this article to make sure you've done all the initial troubleshooting:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    If issues persist, a thorough removal and reinstall of iTunes would be the next thing to try.  This article has steps for removing all related components as part of the uninstall:
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    http://support.apple.com/kb/HT1923
    Cheers,
    - Ari

  • My Super Drive Isn't Reading Anything At All ...

    It makes no noises and it doesn't read any CDs or DVDs I put in it. Any ideas? Don't tell I'm going to have to upgrade to an iMac G5!
    I need help, I can't take my iMac for service now because of school, it would be horrible not to have it to write my papers.
    Any help will be greatly appreciated.

    Francisco, join the club! The same thing happened to me a few months ago (as well as to an awful lot of other people - see all the relevant posts). I've tried all the fixes posted here and elsewhere, but nothing's worked. I don't think I'm up to replacing the drive with another internal drive (seems too techincal), so I'm going to have to buy an external drive. Unfortunately, that's easier said than done. The Irish online AppleStore has recently removed all but one of its external drives and the one that's left is very expensive. So I'm still looking, two months later. Go through all the posts before you replace the drive - you might find some software or firmware fix that works for your drive. Good luck!

  • CR52-A2 doesn't read any disks.

    The other day i was erasing a disk with Nero when it stopped responding and i had to shut down the computer whilst the drive was still 'writing' (although it had been doing it for the past half an hour, so i doubt it was making much progress.)
    When i restarted and tried to erase the CD again, it just said "Please insert a disk into drive d:", when there was already a disk in it. I've tried it with a load of other disks too and it doesn't recognise any of them. The green LED just stays on and there is a quiet but constant clicking coming from inside the drive (like what it does when you first insert a disk, but constantly). What's happened?!
    ..please
    *edit 1 hour 40 mins later:*
    Any time now would be great thanks....
    'Specially since I won't be here tomorrow, and i need it sorted.

    I had the exact same problem, I was in the middle of writing when it stopped and I had to reset now the drive doesn't read any cds. Does anyone know a solution?

  • My optical drive will not read any music cds now or recognize a blank cd in the drive. it might read some data discs. what is wrong with it and how do i fix it?

    My optical drive will not read any music cds or recognize a blank cd. it might read some data cds. what is wrong with it and how can i fix it?

    The optics might be dirty. Try running a cleaning CD through it and see if that makes a difference.
    If not, it will have to be replace.
    Allan

  • TS1424 I purchased and downloaded a book in iBooks.  I read about 16 chapters.  The next time I opened the app to read the book, no words loaded on the pages.  It would go to the table of contents, but not to pages in chapters.  Any ideas?

    I purchased and downloaded a book in iBooks.  I read about 16 chapters.  The next time I opened the app to read the book, no words loaded on the pages.  It would go to the table of contents, but not to pages in chapters.  Any ideas?

    Try to reset your phone, hold the home/sleep buttons until it reboots and the apple logo appears, don't release the buttons till apple logo appears.  If no luck there, Resync the book.  Or delete it and redownload it.  Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • HT2801 Hello ..im currently using iMAC snowleopard 10.6.8 3.06 GHZ INTEL core i3 4GB 1333MHz DDR3......my problem is that my mac accepts cds and dvds...but the icon does not appear in the finder and desktop either.....more over it does not read any cd or

    hello im currently using....iMAC snowleopard 10.6.8
    3.06 GHz intel i3

    i need some help please....my mac acceppts cds and dvds... my drive is located at the right of the screen.....but no icon appears in desktop and finder......also...it does not read....any cd....does not read any dvd either.....it ejects the cds after a while on its own....also it does not burn any cd.....wen i tried....errors with 0x06 ....medium errors,....show up.....also...i tried reinstalling the mac os.....but when i restart the pc...and...keep C key pressed...the cd just gets ejected.....can someone please help me with this problem?????? i contacted APPLE too.. but they said it must be a software problem......also no apple macbookair superdrive does not get connected to the mac either.....PLEASE HELP!!!!

  • Mi Superdrive won't read any Audio CDs or DVD-R

    Hello, i have read that many users may experience same problem as i. My Macbook Pro mid 2009 suddenly stopped reading any audio cds or dvd-r,it just reads DVD movies or programs, i wonder how can i fix this trouble.
    Does my superdrive needs to be replaced?
    Does anyone have found a way to get this solved?
    Thanks in advance.
    Cheers

    If you are under AppleCare, ask for them to fix it.
    If you are not under AppleCare, it may just need a drive cleaning. I can't recommend any specific cleaners, but do know some work, at least as long as they meet these requirements:
    http://support.apple.com/kb/HT2446?viewlocale=en_US

Maybe you are looking for

  • Is 'Thunder port' compatible with 'mini port' cords/divices?

    I am attempting to use my Imac 27" as a display for my xbox 360. So as instructed by "Apple chat" I purchased a KANEX XD connector for $140 and now it is not woking because of the Thunder port. Then I seeked assistance once more from "Apple chat" to

  • W510 Docked in 433820U Port Replicator USB Ports Occassiona​lly Stop Working

    Has anyone had the problem where the USB ports on the 433820U Port Replicator stop working? I've had it happen on several occassion where the USB ports on the port replicator stop working when I do something seemingly unrelated (e.g. unplugging a CAT

  • Depreciation Forecast for 12 months

    Hi, Is there any report which gives the depreciation forecast for 12 months rather than 5 periods? Regards Madhu Vutukuri

  • U[pload PO data.

    what are the steps for uploading purchase order data from flat file to appl. VA01 using session or call transaction mathods ? wat are the mandatory fields?

  • VAlue based MRP

    Hi Experts, I need one help on MRP. My client requirs value to be displayed for each planning quantity in the stock requirement list. Is there any way we can see both planned quantity and and it's value. Requirement is -- They have a budget constrain