IBooks issues after iOS8 upgrade. ARGH!!!

After upgrading both my iPad Mini and iPhone 5 to iOS8 I'm having multiple problems with iBook:
On my iPad Mini:
     1) Only one author is showing up in my Library. If I go to Purchased all my books are there but show downloaded.
     2) Definitions not working - opens up a blank screen Well, after not working a full day it is magically back. Go figure.
     3) Upon starting iBooks I get an error box "Unable to Download Item...please try again later." But I don't know what is trying to download. I select 'retry' and nothing seems to happen.
On my iPhone5:
     1) Same as #1 above but it's a different author that appears. Maybe it's just showing the last author read on that device?
I have tried various suggestions from other posts with no effect. Why is Apple releasing an update that causes their own app to crash?!?!?

I have been having the iBooks crashing problem in iOS 8.x since I installed it on my iPad Air. I tried bunches of different things but it would only work without crashing in Airplane mode.
Today I did a complete restore via iTunes and set it up as a new iPad. I did not restore my backup to it. I simply set it to sync all my books, music, apps and photos in iTunes and when it finished syncing iBooks is no longer crashing on me.
I don’t know if this will work for everyone/anyone else. I’m also using Yosemite and iTunes 12, so that might also make a difference.

Similar Messages

IBooks crashes after ios8 upgrade

i completed the ios8 upgrade and now IBooks crashes every 5 minutes. How do I fix it or report it?

I'm having the same problem on my iPad Air. iBooks worked fine on iOS 7, but started crashing about 3-5 minutes after launching from the moment I installed iOS8. The crash seems to happens while iBooks is syncing with iCloud and putting my iPad in flight mode prevents it from happening. Disabling the syncing of bookmarks, notes and collections does not prevent the app from crashing. I've tried restoring my iPad using different backups(including one I made just before the upgrade to iOS 8), but the crashes keep happening.
As this only happens on my iPad and not on my iPhone 5, where I have automatic downloads disabled, I tried disabling automatic downloads. This seemed to prevent a crash only once, but once I tried to download a book manually, the crashes started happening again. I also noticed that any book downloaded after installing iOS 8 doesn't seem to be recognised as a purchased book. If I try to delete it, I only get the "Delete" option for books(which usually only appears for books that weren't purchased from the iBooks store), while I still get both the "Delete From All Devices" and the "Delete This Copy" options for any books downloaded from the store before installing iOS 8. On my iPhone, I still get both these options for any books downloaded after installing iOS 8.
The only thing I found is that there is a JetsamEvent log in the diagnostics & usage data screen at the exact time of each iBooks crash. Each of these listed iBooks as being the largest process.
I hope Apple provide a fix soon, it's a bit disappointing to have to read iBooks on my iPhone instead of the larger screen of my iPad.

Wifi connectivity issue after IOS8 upgrade

I am using Iphone 5s and I updated my phone to IOS 8 using a wifi, went through successfully but after the update, i am unable to connect to the same wifi i used to update my phone, i never had a problem connecting to it before, the wifi is not secured.. i am getting error " unable to connect to XYZ"..
I have reset the networks settings, went to forget network under wifi but i am not winning.. when i connect the same wifi to 4 different phones( all not iphones) it goes through.
Please help

What wireless router are you using ? What debugging steps have you tried ?

After IOS8 upgrade IPhone5s syncs with exchange but IPad2 syncs ONLY Mail and Contacts, NOT Calendar. Totally stumped. Ideas anyone?

After IOS8 upgrade IPhone5s syncs with exchange but IPad2 syncs ONLY Mail and Contacts, NOT Calendar.
Also, my other tablet - Samsung TabS - has same issue - calendar wont sync. My IPhone and my desktop (windows) synch just fine.
Google calendar syncs on all devices. Totally stumped. Ideas anyone?
THANKS

1.      Log onto Outlook Web Access
2.      Top right hand part of the screen select "Options"
3.     Select "See All Options"
4.      Select "Phone" menu
Check if you have 10 Devices registered.
If you have, you need to delete one of them to add your new Smart Phone to Exchange for synching
Check the "Last Sync Time" to indicate if this device is still active or not.

Performance Issues after an Upgrade

Hello!
We are experiencing performance issues after we upgraded to a new version of Hyperion (11.1.2.1). At this point, I am not too sure about the actual causes for this degrade in performance but I am trying to narrow down the causes and need your inputs. Please help me with your ideas.
1) What could be the causes/factors for the performance to degrade after an upgrade?
2) Does the performance of a script depend on the user credentials i.e. who is launching the script? Whether it’s the super admin of the application/application owner or an application specific admin?
3) Does the performance of the scripts depend on the place you are launching it from? For example - will the performance differ if it’s launched from MaxL Vs EAS?
Please let me know your thoughts on this.
Thanks,
- Krrish

There are a number of bugs 12600557, 12675485, 12669814, 12698488 logged in for 11.1.2.1 - If you use Internet Explorer 8 and have data forms designed to use a large number of sparse dimension members in rows or columns, you may experience performance degradation when opening the data forms.
This has been fixed in Oracle Hyperion Planning, Fusion Edition Release 11.1.2.1 Patch Set Update (PSU): 11.1.2.1.101 which is available on My Oracle Support as Patch 12666861.
HTH-
Jasmine.

Performance issues after iOS4 upgrade

hello everyone,
I had notices few issues after I upgraded my iPhone 3GS:
1- The screen is not rotating (when reading e-mails of flipping photoes).
2- The resolustion has decreased big time after the upgrade. Now the photos are shown in less resolution and they look hazy.
3- my Ipod is not working.
4- I could not restore my device via the itune.
my big question is there a real tangible benifit for this new upgrade?
I really appreciate if you can help me soon
thanks.

There are a number of bugs 12600557, 12675485, 12669814, 12698488 logged in for 11.1.2.1 - If you use Internet Explorer 8 and have data forms designed to use a large number of sparse dimension members in rows or columns, you may experience performance degradation when opening the data forms.
This has been fixed in Oracle Hyperion Planning, Fusion Edition Release 11.1.2.1 Patch Set Update (PSU): 11.1.2.1.101 which is available on My Oracle Support as Patch 12666861.
HTH-
Jasmine.

Ipad air restarts all of a sudden after ios8 upgrade

Ipad air restarts all of a sudden after ios8 upgrade. Restarted 7-8 times. What should be done?

restored the ipad from itunes, did hard rebbot. Still reboots on its own. Any suggestions.....

Slow processing after ios8 upgradation

After downloading ios8 my iphone 4s processing is affected. Is it due to operating system...?

Hi sushilgullu,
I apologize, I'm a bit unclear on the scope of the issues you are describing. If you are having slowness or lagging issues with multiple apps on your iPhone after a recent upgrade to iOS 8, you may want to first try resetting your device:
Turn your iOS device off and on (restart) and reset
If you are still having issues after a reset, you may want to make sure you have a current backup of your data in iTunes, then try restoring your iPhone to factory settings and testing it in that default condition to see if the issues persists before restoring your data. You may find the following article helpful:
Use iTunes to restore your iOS device to factory settings
Regards,
- Brenden

IPhone syncing issues after iTunes upgrade

Hi
I just upgraded to iTunes 8.1.1 for Mac. During the install I got a kernel panic and had to restart. iTunes seems to be installed fine. When I connect my iPhone I get messages like "some content will not be copied to the iPhone as this computer is not authorized" or such like. So now several apps, videos and music has been wiped from the iPhone.
I tried authorizing the computer but I just get "This computer is already authorized".
there does not seem to be any particular link between the erased content. Some was purchased on the Mac and some on the iPhone, all from the iTunes store. Before I updated iTunes everything synced fine.
I can d/l the apps again direct to the iPhone but I can't find a way to get the missing music and videos back on the iPhone. Very annoying.
Would re-installing iTunes help?
Any ideas?
Thanks
Chris

Hi Chris,
Try highlighting the one of the songs that will not sync in iTunes> cilck File> Get Info, check the account name and verifying you are authorizing the computer with correct account.
If the issue persists, try removing the SC Info folder as shown here: http://support.apple.com/kb/TS1389
If you still see the issue after removing the SC Info folder, try reinstalling iTunes as shown here: http://support.apple.com/kb/HT1224
-Jason

Issue after solman Upgrade

Dears,
We were using solman 7.0, connected to ECC 5.0 server.
We configured all activities EWA,System Monitoring and all were working fine.
Now we upgraded solman to 7.01(EHP1) and R/3 to ECC 6.04 .
1 - My first concern is after upgradation it should automatically pick details but is is still showing ECC5 in product version.
We performed Read data from remote system also but still same issue.
2 - When I go to EWA or system Monitoring I only find Prd server there while in solution's logical component all dev,qas and prd servers are available.Earlier before upgrading it was showing all systems in EWA and system Monitoring.
Please suggest.
Shivam

Hello Shivam
For point #2 please look closely at the solution containing the systsem and make sure that 1) The Dev, QAS systems are included, and are highlighted greeen ( Meaning they are status "Put in Solution"). It sounds a lot like this setting is not done, therefore the systems would not show when you would try and use that solution in functions like EWA, BPMON, etc.
It sounds very much like when you create a new soltuion with PRD, QAS, DEV systems assigned, but only the PRD system is "Put in Solution" by default, so you explicitly need to right click the system in change/edit mode, and select "Put in Solution", then save.
Now why this might be the case after the upgrade, I don't have an answer, but it is worth having a check as the symptom fits this issue. I would advise you check the solution itself and ensure the DEV and QAS systems and in status "Put in Solution".
Hope this information is helpful.
Regards,,
Paul

SAP Query selection screen issues after ECC upgrade

Hi all
We have a custom query created and assigned to a custom transaction code, which after upgrade to ECC 6.0 we find that the selection screen layout is different from what was available in 4.6C system.
All the fields required are available.
However, the sequence of the fields on the screen is different from the 4.6C after the upgrade.
Can anyone help identify the issue so that the issue can be resolved?
Thanks
Vinodh S

Hi N_niki
There is no resolution as such.
We had raised a Customer message with SAP and were informed that this was expected as the procedure to execute the reports was changed in ECC when compared to 4.6 (technical changes) and hence this issue shall remain for some queries wherein the old changes need to be brought back using an option in the SAP Query.
Please refer to SAP Note # 723577 which could provide a better explanation for the issue.
Hope this helps.
Thanks
Vinodh Sudhakaran

IP Phone 7921 / 7925 roaming issues after WLC upgrade from Version 7.2 to 7.3 and / or 7.4

Hi,
We have a customer which is using a Cisco WLC 5508 and 3502I APs. As he used the 7.2.103 release, There were no issues with VoWLAN. Now he needed new APs and ordered the 2602I. To use them he needed to upgrade the WLC to a 7.3 or later release. After the upgrade, he now encounters problems while roaming with the phones. The phones were tested with FW 1.4.1, 1.4.2 and 1.4.3.
Configuration is set according to wireless voice design guides (VoWLAN DG 4.1, 7921 Deployment Guide). A Cisco TAC is also in progress, but they seem to be uncertain whether it is a wireless or CUCM issue, but I don't see a reason why it should be the CUCM when the only thing changed is the WLC Software Version.
Is there anybody who is aware of such issues and can offer help?
Thank you in advance.
Best regards,
Patrick

Hi,
we had a TAC ticket open with this customer and after some time, the TAC gave us the advise to use this release and the problems are now solved.
So for others having the same issue: If you only need to support the 2600 APs, stay with the latest 7.2 release as there are some issues with the 7.3 and 7.4 release. If the customer requires HA, AVC or any of the new features + wireless voice, be very careful as it seems that the newer releases are having problems with that. I hope that Cisco will fix this very soon.
regards,
Patrick

Web dynpro ABAP- small issue after EHC1 upgrade

Hi All,
We have a Web dynpro ABAP report and it was working fine before the EHC1 upgrade. After the upgrade we noticed that the row count in ALV greed was disappeared.
The report used to show 25 records per page and we were able to jump to the other pages by clicking on row count that was placed right below the report. Now report shows all the records and we only have scroll down option.
Any idea where to look/ how to fix this issue?
Regards,
Mike

In addition to applying that note, you also must deactivate Lightspeed rendering. To me that's too extreme of a thing to do just to get paginators. You loose the huge rendering performance improvements and it also means you can't use any of the new UI elements from 7.01.

Performance issue after PT Upgrade.

Hakan and Team ,
We recently moved from PT 8.48 TO PT8.51.18 on CRM 8.8 Application.
After the upgrade, we tremendously saw big performance issues with PeopleSoft CRM Application. It freezes almost every day and all their work-force (call center representatives) go idle. It significantly impacts their productivity and eventually losing revenue.
can you please suggest few suggestion or DOC that will help us to improve performance on application and DB side.
Deatils :-
SQL SERVER 2005
Windows 2008 R2

Hi,
Performance is always a difficult one to tackle.
It can be at so many levels, DB, Appserver, Webserver, CPU, RAM, Infra, etc.
At OOW2012, David Kurtz gave a great highly detailed presentation on this subject: CON9210 - Performance Tuning for PeopleSoft Administrators
http://www.myexpospace.com/oracle2012/smupload/scloader.cfm?SCID=257daa92-a6e8-411a-9806-2c22e56687d3
See if you can apply some of the keypoints from his presentation.
Regards,
Hakan

Permissions issue after Mavericks upgrade

I have just updated an early 2008 IMac with OSX Mavericks.
All software running fine, but I noticed occassionally I was getting an authentication prompt on some files, didn't follow, but simply authenticated as and when I need to, I assumed it was when I moved files from my Mac Pro to my Imac.
Having run the upgrade however, I get an error message to contact the vendor (Battlefront) as my copy of Combat Mission Battle for Normandy has lost its license.
After the upgrade I had also purchased from the same vendor Combat Mission Fortress Italy. Having downloaded this and gone to run after copying to applications, this software gives me an error message saying unknown developer so I have got no where near installing a license.
Having contacted the vendor and tried to get a work around, I am now getting the message it is you Mac not our software, despite the fact that all my other software is working fine (and the fact that the Combat Mission Battle for Normandy game worked fine until the upgrade).
I do feel some sympathy for them, I do think the Mac has some sort of permission issue - I also probably compounded this by deleting a user which I did not recognise called 'wheel' which I suspect now is some form of default permisison.
Anyone got any ideas, how do I 'reset' the system - I have tried fixing the permissions through disk utility.
My vendor got me to run a sudo command through Terminal, but I got the message...
sudo: unable to stat /etc/sudoers: Permission denied
sudo: no valid sudoers sources found, quitting

Update Saturday Jan 4, 2014
Before my Mavericks upgrade on my Mac Pro, no problems ever (use my Mac 4-8 hours a day) using my Bose Companion 5 USB connected speakers. I've tried shutting the Mac down and plugging the Bose USB cable into another open USB port = no joy and other combinations. I tested the same Bose Companion 5 USB speakers on two other laptops with NO issues (ouch...they were running Windows 7) I have deleted the two .plist files, did the CMD+OPT+P+R reset, etc... = no change. Looked into Midi Audio Setup and did not see anything in there to change even though I tried a couple of things and no avail (there was no Garageband setting/entry).
I still get a solid "BEEEEEEEEP" sound every 20+ seconds, when the sounds tries to toggle, by itself, between the Bose USB Audio device and the Internal Speakers.

IBooks issues after iOS8 upgrade. ARGH!!!

Similar Messages

Maybe you are looking for