IBooks notes

Hello!
iBooks is the best reading application available. But there's serious issue, when I read and see a link [1] to notes (that usually are placed in the end of the book) and press it I see the list of the notes. It is fine, but how to get back??? I know some ebooks has recursive links back to the text, or I can bookmark current page (tho it's weird).
Anyway I think all that is not way out. In my opinion the best way would be adding Pop-ups when you press [link] u can read the explanation right there. There's no any programming problems or limitations with implementing it.
What do you think? How do you cope with this issue for now?

The iBooks forum is here:
http://discussions.apple.com/forum.jspa?forumID=1372

Similar Messages

  • IBook Not Detecting Internal Hard Drive

    So, this morning my computer started acting slowly, and apps started freezing. I restarted, and to my horror found that it wouldn't boot. It starts, and the screen is gray, but then nothing happens. I have discovered that the problem must be the iBook not detecting the hard drive. I booted into a linux live CD, and found that it could access the HD. Then when I turned my comp off, and went into select boot drive mode by holding option on startup, I found that no hard drives were listed to boot from. I have also tried connecting to my computer via firewire from another computer, and that couldn't detect it either. What is the problem here? I am becoming very nervous all my work is on there. Thanks for the help.

    Try booting from the Apple Restore disk and run the Apple Hardware Test that is on that disk. I fear that it may confirm a failure of your hard drive, but you never know until you try.

  • Ibooks not searching the store!

    Ibooks not searching the store. I deleted ibooks from my phone and cloud and reinstalled still will not search the store, I did a reboot on my phone several times and the computer!!! Ibooks working fine in all areas except store??? Please help! Ty

    I am looking for the same answer

  • Does iphoto's ibook not ship internationally? I am currently in Hong Kong and have just put a book together that I would like to buy.

    Does iphoto's ibook not ship internationally? I am currently in Hong Kong and have just put a book together that I would like to buy. ibook not letting me put in international address and shipping info seems to suggest US only. I find this hard to believe. The Apple Store in Hong Kong is the size of Manhattan. Well almost!

    Don't forget (from  Payment & Pricing - Apple Store (HongKong)):
    Credit cards accepted
    Apple is unable to accept credit, debit, or check associated with a billing address outside of Hong Kong.
    Not only do you need to select the Hong Kong Print Store but use a credit card with a Hong Kong billing address.
    Happy Holidays

  • IBooks not syncing between iOS7 and Maverick

    iBooks not syncing between iOS7 and Maverick
    Just updated my MBP to Mavericks and only a few items have synced from my phone to the mac in iBooks.  The phone was also updated to iOS7.0.3 (the latest) today too before the Mavericks update.
    Does anyone else have this problem?  Is this a bug which will hopefully be fixed shortly? Or is there something I can do to resolve this?
    I have a number of .pdf´s in iBooks (.pdf books) on the phone and would obviously want everything on the phone accessible on the computer, as is the idea.
    Many thanks for your help/advice.
    Susan :S

    This has been my headache since day one and a complete swing and a miss by Apple.  I haven't been able to get ANYTHING I have not explicitely purchased from iTunes to sync in iBooks across device.
    For example:  If I load an ePub or PDF into iTunes and "manually" add to a device, this works just fine.
    However, if I open a PDF file on my iPhone into iBooks, it doesn't show up in any of my other devices, including the new iBooks on my iMac with Maverick.  it doesn't matter which device it's added, nothing syncs if it's not purchased from iTunes.
    Please, someone make me a liar and tell me I've completely missed something.
    Apple:  Why or why can't I add PDF files to iBooks on my iMac and have them automagically show up in the collection I created on all my devices?  Because I didn't purchase them from you, you say?  Stupid, stupid, stupid.
    Then don't let me add it in the first place and stop advertising "my content anywhere on any device" because this has been broken from day one.

  • My ibook author is not showing preview and when i click preview it is saying ibook not installed even though i have latest ibook installed on my ipad mini and i am on ios 8

    my ibook author is not showing preview and when i click preview it is saying ibook not installed even though i have latest ibook installed on my ipad mini and i am on ios 8 can any one please suggest something

    What happens when you click the "Download" button for Mountain Lion? Do you get any response (error messages, etc.) from the Mac App Store?
    Clinton

  • HT5557 can I listen to an ibook, not children's, while driving?

    can I listen to an ibook, not children's, while driving?

    pnush wrote:
    1. Listen to classical music from iTunes on my computer while working in my home office; and
    2. Allow my kids to listen to holiday music from iTunes on my computer via AppleTV in the family room.
    yes that is not a problem.

  • Ibook not downloading

    Ibook not downloading to my iPad from iTunes U

    How about this... I'm having the same issue w/ my iPad. Bought 3 books tonight, only 1 downloaded. Other 2 show up on my bookshelf but have no progress in their status bar. When I click on purchases and try to download them it takes me back to my bookshelf and then gives me "you have already purchased these, go to purchases to download." It's this never-ending cycle!
    On my MacBook (running everything current), it shows that I've bought these books, but when I try to download them there I get "Cannot check for downloads. iTunes temporarily unavailable." I've re-booted everything (MacBook, iPad, modem, router), even re-installed iTunes.
    Then I tried my iPhone, was able to download other 2 books and then synced it to my MacBook, and then synced that to my iPad. Books showed up normal (was able to open them) once and then reverted back to the "will not open, blank status bar" like before.
    Have rebooted iPad lots, even did your steps 1, 2 & 3.
    Lol, help!

  • Wireless iBook not connecting to Airport Express

    As in previous discussions i've seen, all of a sudden my iBook which i have used for quite some time now without any major problems will not find my airport express wirelessly, i am using a router and the same connection for my desktop (hardwired) and the desktop works 100%, i've even replaced the cable from the router to my Airport Express and when I take the very same cable that goes from the router to the AE but plug it straight into my iBook it works 100%, but when plugged into the "AE" the iBook is not finding it, or actually it does come up in the list of available wireless ports (I live in new York city so there's a bunch on there at any given time) but it does find mine automatically as it used to, but when I try to connect to it when i find it in the list, it says "There was an error joning the AirPort network"... if i hit 'try again' several times it it will evntually (somrtimes after 3 tries othertimes after 30 tries)... but even after it says in the menue bar that I am connected with 100% strength, nither iTunes Air tunes finds the AE connection nor Safari (which says "You are not connected to the internet.")
    At the browsers suggestion i then go to the network diagnostics and run through the prompts, until it gets to the 'Select AirPort network" window and nothing shows up.
    Then i tried the AirPort Admin utility and it does not find my base station either.
    My connection to the internet is 100% without the AE, so obviously something is wrong with my iBook airport card or the AE itself.
    Yesterday I uplaoded the newest software 6.2 then reset the AE and actually it worked 2 sessions, then I got back on later in the evening and was having all the same problems...
    so I read on these discussions that going back to 6.1.1 was what was helping others, well so far it has made no difference here.
    that said the signal that it did find after trying again and again and that does show up in the pulldown signal menue drops off eventually... and all this while still not being able to connect to the internet or airtunes wirelessly. and again all the while my connection on my desktop (hardwired through the same router) works 100% (I have verizon DSL and it's pretty great.
    THE AIRPORT EXPRESS GREEN LIGHT IS ON as well.
    I have not done a 'hard 5 second re-set" of the AE becuae i thought it might be difficult to imput all the settings all over again, since i did not set it up myself originally... is this my only choice? can some one give me any other ideas? thank you.

    Glen,
    I feel your pain buddy - same issue here. I have a PG G4 running AE as well. I have internet through Comcast which is coming from the wall, into the modem, and then to the AE. I have faced similar problems as you at least twice in the past three days. Tonight I went to check my e-mail after reading for a couple hours and my drop-down showed a check next to my network, the AE status light was green, and it looked fine. However, when I went to check e-mail I was not connected and same thing with internet. I finally launched Airport Admin Utility and my base station did not show up in the source list - hmmmm?
    I am a little concerned about this myself because it is frustration. If you push the reset button on your base station while it's still plugged into power and hold it down for five seconds it will go through a "hard" reset (keep in mind this is not the same as a "factory default" reset). Have you done this before? It takes about 45 seconds. When done and the status light is back to green, you can join the Apple network _______ (some strange numbers) from your airport drop down and then launch Apt. Admin Utility. When you double click on your base station from the admin utility it will come up with a list of profiles. It will allow you to select your previous saved profile from a list. Click on your previous profile, click OK, and the AE will reset with your previous settings. This has gotten mine back up and running, but it's a littl disconcerting that it's happened so much
    Any other thoughts out there? Anyone else having these problems and have suggestions for troubleshooting?
    -JB

  • Printer Sharing with eMac, iMac, and iBook not working

    Hello, everyone. I hope you guys can help me out with this:
    I have an Epson Stylus CX4600 hooked up to my eMac via USB. My eMac prints fine with it. The eMac is getting its internet via an Ethernet wire going downstairs into my Linksys Router, which sends my Shaw internet to my iBook, my iMac, and my eMac.
    I want to allow the iMac and iBook to access the printer over the network directly, so I can just print from those computers and have it come out the eMac printer.
    I've looked at many articles on this. So far I've installed the drivers on all computers, plus they can all network to each other over File Sharing, so they are connected.
    But I haven't been able to print yet. The most I've been able to do is get the files I try to print from the iBook and iMac to show up on the eMac, in its printer queue. Only it didn't show up for a LONG time. And when it did, the jobs automatically stopped and everytime I clicked start, it would automatically switch back to stopped again. The files would not print.
    At this point, I want to get the iBook connected to it first. If I can do that, I'll try the iMac. But the iBook is first priority. I've tried making it connect to the Printer using IPP (IP Printing), and the result was... what I explained in the above paragraph. I also tried just ordinary Printer Sharing, but it said something close to this:
    "Unable to locate eMac.local, Unknown host."
    That hardly makes sense, because at that time I also tried getting the iBook connected to the eMac over File Sharing which worked. For some reason, the "eMac.local" and "iMac.local" files don't show up in my Network thing when I connect to them, or even when they're not connected. HOWEVER, I think they did at one point. I could swear I saw "eMac.local" and "iMac.local" in the Servers folder in the Network section of the iBook at one point. But it's no longer there.
    Please help. I've described my problem as well as possible. What a long post. If there's any way to make my eMac, iMac, and iBook be able to print through my Epson Stylus CX4600 at any time directly, then I'll do it.
    Help!

    Yes. I did say that my eMac, iMac, and iBook are all
    connected to the internet and networked to each other
    over the Linksys router. I believe the router is
    still on factory settings because we never really
    "set" or programmed anything with it.
    Mac OS 9.2.2 on the iMac, Mac OS X 10.4.8 on the
    other two. IP addresses?
    192.168.1.100 is what I would use to connect to the
    eMac from the other computers.
    This is the eMac's IP, correct? Did you type it into Network, or was it assigned by the router's DHCP?
    192.168.1.101 is what I would use to connect to the
    iBook from the other computers.
    This is the iBook's IP, right? Again, fixed or DHCP?
    192.168.1.102 is what I would use to connect to the
    iMac from the other computers.
    Same for this IP.
    The iBook, as I've said, is wired. No wireless
    connections to speak of.
    Okay. Now, if the router is handing out IP addresses via DHCP, what range was it configured for? My Linksys, for example, is configured to hand out IPs in the range 192.168.0.10 to 192.168.0.254. It has the IP 192.168.0.1, so the IPs 192.168.0.2 through 192.168.0.9 are available for me to hand out as fixed IPs. If I was to hand out 192.168.0.100 as a fixed IP, the router's DHCP server would have a potential problem, as it might hand out that address too, and only one device can have a particular IP address on a particular network. If your router is handing out 192.168.1.100, .101, and .102 via DHCP, you could and probably do have a conflict if you've got those addresses set up as fixed IPs. In particular, if you have anything else on the network, including Bonjour-enabled devices such as printers, you're likely to have a conflict.
    Best way to resolve a conflict, if any:
    1 set all the Macs to either DHCP, or if fixed IPs are required, to a fixed IP outside the range of the DHCP range on the router. (Or you could just turn off DHCP on the router.)
    2 check the router to be sure that DHCP is set the way you want it, and the DHCP pool is what you think it is.
    3 shut down the Macs.
    4 turn off the router, wait 30 seconds, turn it back on.
    5 turn the Macs back on, one at a time.
    On my Linksys, the way to set the DHCP pool is simple:
    1 log into the router. (My router IP: 192.168.0.1. Yours would be 192.168.1.1.) Hit the 'Setup' tab. Verify the gateway IP. (Should be the router's IP. If it's not, something very strange is happening.) Verify the start of the DHCP pool. Verify that DHCP is on (or off, as you want). Verify the end of the DHCP pool. (My start is 192.168.0.10, and there are 245 IPs in the pool, so the end is 192.168.0.254. If I changed the number of IPs to 200, the end of the pool would be 192.168.0.209, and I'd be able to set the IPs 192.168.0.200 to 254 as fixed IPs if I wanted.) If your router allows for IPs to be reserved, you can set up reserved IPs for one or more of your Macs. (A reserved IP is an IP the router holds for a specific device. The network card in each computer has a specific MAC address; if that address is registered with the router, then every time that computer is turned on and connected it will get the IP that was reserved for it... so long as that IP is in the DHCP range and DHCP is turned on. Think of it as a fixed IP without your having to actually fix the IP.)

  • Shuffle shows in explorer, works on iBook, not in iTunes on XP

    My wife has a shuffle, my iPod photo works/updates etc. on the PC, the shuffle shows up fine in Explorer and I can browse it. I also plugged it into my iBook, shows up fine there too and says it's linked to the other computer and shows it as formatted FAT32, I even updated it via the mac iPod updater, but my music library is on the PC.
    I've updated the software, rebooted, reset the shuffle, etc. but the PC iPod updater and iTunes will not recognize it. I don't think the shuffle is defective, I think the software to recognize shuffles has bugs.
    Can anyone help? Why won't it just let you pick the drive letter, why must it autodetect?

    more weirdness, works in my other PC, this one has a ton of USB devices and drive letters taken up, I stopped every exe and service but the critical ones, and it still doesn't work in this one with all the songs.
    winamp can send songs to it, I guess I'll just use that.

  • English dictionaries in iBooks not available in russian interface

    Hello!
    I am using russian language interface on my iphone 4 and I often read books in english via iBooks, so I need to define words from time to time. Before updating to iOS 7 I haven't experienced any problems with that, but after update iBooks says it has no dictionaries. I know about the manage button and that I can download dictionaries I need (American english new oxford for example) - I did all that, but after closing app it resets those settings and when I open it again it says no dictionaries. I also tried:
    -Updating to iOS 7.1
    -Resetting phone settings
    -Reinstalling iBooks
    -Switching to english interface - which actually helped, but I want it to be working in russian interface too.
    Is there anything left to try? Or I need to contact apple? How do I do that?
    Thanks!
    Dimitri.

    dimasya wrote:
    I'm almost sure that keyboard is not provided in iBooks, so not quite sure what you mean. In general of course I have english keyboard on.
    I meant your last-used keyboard, which I thought might be Russian.  The dictionary should be available in all Apple apps.  Do you have the same problem in Notes?

  • Old Composite Video cable (Tangerine iBook) not compatible with Video iPod

    I discovered a little surprise.
    Despite being exactly identical on both ends of the cable, an old Apple Composite Video cable, originally purchased for a Tangerine iBook, is not compatible with Video iPod.
    Anybody confirms such situation, or is it just my Video iPod with a faulty video output?
    Ciao
    30G Video iPod Fifth Generation   Mac OS X (10.3.9)  

    Gerardo
    The cable may look the same but it's wired differently. Please see this for more info :
    http://www.tuaw.com/2005/11/01/how-to-convert-an-ibook-av-cable-to-an-ipod-av-ca ble/
    regards
    Brian

  • IBook not connecting to the Internet

    I have a weird problem with my iBook G4. I cannot get access to the Internet at all. I connect using a TimeCapsule. In total I do have 3 Macs, 2 of them connect just fine just my old iBook gives me headaches. It doesn't acquire a correct IP address either. The IP address it gets is something like 169.254.184.21 where as the other Macs get 10.0.1.198. I do connect over Wifi. The Wifi symbol in the menu bar gets all bars on the iBook and the TimeCapsule does show 4 connected clients ( I do guess my iPhone is one of them).LAN doesn't solve the problem. Exact same situation. The Mac says it has a self assigned IP address. It looks like it doesn't get the IP address from the TimeCapsule. The iBook runs 10.5.5. I do use DHCP.
    The TimeCapsule does connect to a Cable Modem (not directly - I do use LAN over Powerlane to get from downstairs to upstairs where my TimeCapsule is sitting) I have this setup now for about a year and it used to work fine. Its only lately that my iBook doesn't connect to the internet. I don't know what changed. It used to connect just fine. I had it on the road and used it with other WiFi clients some time ago, not sure if that introduced the problem.
    I did restart both the TimeCapsule and the Cable Modem and I already reset the PMU on the iBook.
    So - two Macbook Pros and one iPhone connect just fine to the Internet using this TimeCapsule. It does show 4 connected clients and I do get all the bars in the menu bar on the iBook.
    Please help. I have no idea what to do or where to look for the problem. I hope someone does have an idea.
    Thanks a lot for your support
    Kind regards
    Andreas
    Message was edited by: CmdrLaForge

    The IP address starting with 169 indicates that the iBook was not able to communicate properly with the DHCP server on the Time Capsule.
    Did you by any chance enable MAC address filtering on the Time Capsule? If so, disable it.

  • IBook not connecting to Airport

    Hi I have an iBook 13' I am very happy with it, but I have always been afflicted by a problem, every time my iBook goes to sleep, it loses the ability to connect to my Airport.
    When i wake or start it, it show a list of wifi connections, all my neighbours, but not mine, at that point I have to manually connect it.
    Any ideas on why?
    Thanx

    in system preferences > network > airport > network name
    move the name of your network to the top of the list,
    might help?

  • IBook not connecting to AirPort Express, other computers work

    I have not been able to connect our iBook to Airport Express, however our two other computers are able to access the network. I can connect to the network however I am not able to surf the web on the iBook. Oddly, if we take the iBook elsewhere - like a coffee shop - it can connect.
    I did a hard re-set of the Airport (paperclip while plugging in). The iBook can see the base station within the Airport setup utility but is unable to connect. Our other computers can still access the new Apple jf83j39 network.
    Suggestions?

    Welcome to the discussions forums blajer.
    Well, that is really weird.
    Try creating a new location:
    Choose Apple menu > System Preferences, and click Network.
    Choose Edit Locations from the Location pop-up menu, and then click Add .
    For each network connection setting, enter the same settings that your other computers are using. For example, click TCP/IP > configure IPv4 "using DHCP" etc. DNS > Make sure the DNS Server(s) fields are empty or are in greyed-out type. Try turning OFF IPv4.
    Click Apply and wait a moment. Does anything change? What does your IPv4 address show now?

Maybe you are looking for

  • Mail and address book data file location

    Does anyone know where mail and address book saves its data? My old mac died but I was able to remove the hard drive and mount it in a external firewire case. The drive mounts and appears in good shape. I tried using the migration utility to transfer

  • OA Framework,how to make field Read-Only which is used inside Switch case

    Hi all, Using Personalization in OA Framework, when I am trying to make field read only, which is inside Swich statement ,then that field get automatically hidden.but my purpose is to make that field read-only not hide. My field name is Proposed Annu

  • Unrecoverable timeout!

    Hi, We are on SP10 and our scenario send HTTP request to marketplace. When i send a test message to marketplace from RWB there is a timeout and the response message in sxmb_moni is : "HTTP server code 403 reason java.io.InterruptedIOException: Unreco

  • Is it possible to extend my desktop to another screen wirelessly?

    Hi Guys, Is it possible to extend my desktop from my macbook pro to a second display unit in my room which will be wall mounted? Obviously this is possible with a cable, but I wonder if it can be done wirelessly and with what kit. TIA. Ravi

  • Very confused about puting vids on my ipod

    alright could a PC user please tell me from start to finish how to put a music video on my ipod...i've tried videora and it didn't work for me unless you gotta change around settings and stuff, i didn't do any of that or just tell me a different prog