IBooks screen dim only works on 3/4 of screen

I Just upgraded to ipad os 813 and now in iBooks whe reading a book, if I want to set brightness to its lowest setting it applies this to only 3/4 of the screen. See attached screen shot. I would appreciate any help on how to fix or if this is a big with the new iOS?

It hasent been updated to support iphone 5 screen size yet, it will come in time.

Similar Messages

My macbook wont start the screen turn blue and stay like that for hrs. It only work when i use safe mode, i try to use disk utilities to fix it but the disk utilities keep saying error and a bunch of other stuff. I dont the cds the comp came with, help.

my macbook wont start the screen turn blue and stay like that for hrs. It only work when i use safe mode, i try to use disk utilities to fix it but the disk utilities keep saying error and a bunch of other stuff. I dont the cds the comp came with, help. i've tried the command s command p command v but nothing i've tried to the safe mode then a quick restart but nothing
disk utility give me this:
Process:         Disk Utility [371]
Path:            /Applications/Utilities/Disk Utility.app/Contents/MacOS/Disk Utility
Identifier:      com.apple.DiskUtility
Version:         11.5.2 (298.4)
Build Info:      DiskUtility-2980400~60
Code Type:       X86-64 (Native)
Parent Process: launchd [86]
Date/Time:       2013-11-05 03:29:41.247 -0500
OS Version:      Mac OS X 10.6.8 (10K549)
Report Version: 6
Interval Since Last Report:          9522 sec
Crashes Since Last Report:           29
Per-App Interval Since Last Report: 981 sec
Per-App Crashes Since Last Report:   25
Anonymous UUID:                      F6B8E263-76C8-4C7D-AA58-48134BF4BA78
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000000020
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Thread 0 Crashed: Dispatch queue: com.apple.main-thread
0   libobjc.A.dylib                         0x0000000100c62fbc _read_images + 312
1   libobjc.A.dylib                         0x0000000100c79721 map_images_nolock + 1266
2   libobjc.A.dylib                         0x0000000100c62761 map_images + 115
3   dyld                                    0x00007fff5fc039c5 dyld::notifyBatchPartial(dyld_image_states, bool, char const* (*)(dyld_image_states, unsigned int, dyld_image_info const*)) + 853
4   dyld                                    0x00007fff5fc0c849 ImageLoader::link(ImageLoader::LinkContext const&, bool, bool, ImageLoader::RPathChain const&) + 201
5   dyld                                    0x00007fff5fc04d54 dyld::link(ImageLoader*, bool, ImageLoader::RPathChain const&) + 118
6   dyld                                    0x00007fff5fc08f7c dlopen + 490
7   libSystem.B.dylib                       0x0000000100a14e40 dlopen + 61
8   com.apple.CoreFoundation                0x0000000100d78ef7 _CFBundleDlfcnLoadBundle + 231
9   com.apple.CoreFoundation                0x0000000100d77e97 _CFBundleLoadExecutableAndReturnError + 1191
10 com.apple.Foundation                    0x0000000101008355 _NSBundleLoadCode + 638
11 com.apple.Foundation                    0x0000000101007c78 -[NSBundle loadAndReturnError:] + 742
12 com.apple.Foundation                    0x000000010101960c -[NSBundle principalClass] + 38
13 com.apple.framework.DUSupport           0x0000000100082080 -[DUModuleManager(_private) findDUModules:] + 405
14 com.apple.framework.DUSupport           0x0000000100081ed9 -[DUModuleManager orderedModuleListOfModules] + 40
15 com.apple.DiskUtility                   0x0000000100006082 0x100000000 + 24706
16 com.apple.DiskUtility                   0x0000000100005f59 0x100000000 + 24409
17 com.apple.AppKit                        0x0000000101444625 -[NSWindowController _windowDidLoad] + 538
18 com.apple.AppKit                        0x00000001013e1f77 -[NSWindowController window] + 112
19 com.apple.AppKit                        0x00000001015f61d9 -[NSWindowController showWindow:] + 47
20 com.apple.AppKit                        0x00000001015c7c5c -[NSDocument showWindows] + 98
21 com.apple.AppKit                        0x00000001015c64bb -[NSDocumentController openUntitledDocumentAndDisplay:error:] + 340
22 com.apple.AppKit                        0x00000001014f7b44 -[NSDocumentController(NSInternal) _openUntitled] + 111
23 com.apple.AppKit                        0x00000001014f79ab -[NSApplication _doOpenUntitled] + 257
24 com.apple.AppKit                        0x00000001014f733b -[NSApplication(NSAppleEventHandling) _handleAEOpen:] + 185
25 com.apple.AppKit                        0x00000001014f6fd9 -[NSApplication(NSAppleEventHandling) _handleCoreEvent:withReplyEvent:] + 77
26 com.apple.Foundation                    0x0000000100ffd0d6 -[NSAppleEventManager dispatchRawAppleEvent:withRawReply:handlerRefCon:] + 360
27 com.apple.Foundation                    0x0000000100ffcf06 _NSAppleEventManagerGenericHandler + 114
28 com.apple.AE                            0x0000000104d7332b aeDispatchAppleEvent(AEDesc const*, AEDesc*, unsigned int, unsigned char*) + 162
29 com.apple.AE                            0x0000000104d73224 dispatchEventAndSendReply(AEDesc const*, AEDesc*) + 32
30 com.apple.AE                            0x0000000104d7312b aeProcessAppleEvent + 210
31 com.apple.HIToolbox                     0x00000001028a0619 AEProcessAppleEvent + 48
32 com.apple.AppKit                        0x00000001013fc095 _DPSNextEvent + 1191
33 com.apple.AppKit                        0x00000001013fb801 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 155
34 com.apple.AppKit                        0x00000001013c168f -[NSApplication run] + 395
35 com.apple.AppKit                        0x00000001013ba3b0 NSApplicationMain + 364
36 com.apple.DiskUtility                   0x0000000100002009 0x100000000 + 8201
37 com.apple.DiskUtility                   0x0000000100001db8 0x100000000 + 7608
Thread 1: Dispatch queue: com.apple.libdispatch-manager
0   libSystem.B.dylib                       0x0000000100a27c0a kevent + 10
1   libSystem.B.dylib                       0x0000000100a29add _dispatch_mgr_invoke + 154
2   libSystem.B.dylib                       0x0000000100a297b4 _dispatch_queue_invoke + 185
3   libSystem.B.dylib                       0x0000000100a292de _dispatch_worker_thread2 + 252
4   libSystem.B.dylib                       0x0000000100a28c08 _pthread_wqthread + 353
5   libSystem.B.dylib                       0x0000000100a28aa5 start_wqthread + 13
AND MORE TOO MUCH TO COPY N PASTE HELP PLEASE!!!!!

Reset the PRAM
Reinstall the operating system from the dvd (you will not loose your data)

My ipod nano 4th generation only works when it is plugged into the computer; otherwise, the screen turns black and it is completely unresponsive to any efforts such as pushing buttons, reseting, etc. What should I do?

My ipod nano 4th generation only works when it is plugged into the computer; otherwise, the screen turns black and it is completely unresponsive to any efforts such as pushing buttons, reseting, etc. What should I do?

Sounds like the battery is shot and in need of a replacement. You can have Apple replace the battery for a flat fee or you can send it into a third party repair center for a bit less.
Not much else you can do for troubleshooting this one.
B-rock

I have set hyperlinks within my ibook author document, they work perfectly until i export and view on the ipad, when only one or none work, (hyperlinks to website not working at all) what am i doing wrong?

I have set hyperlinks within my ibook author document, they work perfectly until i export and view on the ipad, when only one or none work, (hyperlinks to website not working at all) what am i doing wrong?

An external hyperlink should handoff to Safari and leave iBooks.
If that's not happening, perhaps there is something misconfigured on your iPad? Have you manually confirmed those links work in Safari on your iPad?

Torch 9800 touch screen only works when slid open.

Hello everyone, this is my 1st post but I've been lurking the forum for some time. I'm running a Torch 9800 on AT&T right now on v6.0.0.600
This is what's happened with my phone: as the subject notes, my touch screen only seems to work when I slide open the phone.
What I've tried so far that doesn't work: rolling back software, rolling the software forward again, hard resets, soft resets, adjusting intervals for the touch screen.
The weird part is that I saw an older thread that had the exact opposite problem(touch screen only worked when the phone was slid closed). I have a level/ruler app for my phone and it's showing that the phone knows when it's tilted/angle/orientation. I've also closed the phone, opened it slightly (about the width of my thumb) and it stays horizontally oriented + I'm able to use the touch keyboard that way.
Anybody have a suggestion as to what I can try next to fix this? I haven't gone so far as to just go and get a 9810 yet, but i'm considering it.

Thanks for the post.
Has it in anyway fallen or pressed hard at any point? It could be the belt, which would just need you to go with it to a certified repair center and get it secured.
Twitter: @IAmBenGiey | Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.
Try my apps:
The Ultimate Currency Converter and T2G - BloGFeed

Blackberry Curve 8530 track pad only works on the main screen

I have a blackberry curve 8530 and the track pad will only work on the main screen. I have removed the battery and let it sit for 2 minutes before re-installing it again, the track pad started working but only for about 30 seconds and it back to the same thing.
Any suggestion?
Thanks You

Suggest that you get your handset serviced by an expert this will solve your problem..

Why does the local dimming system work differently in different picture modes on the w950b?

Basically I was wondering why the local dimming is much more effective in the cinema mode than in other picture modes like game mode. For example, using the Disney World of Wonder advanced brightness test pattern, the blacks were very nice and dark with full clarity and detail of the test stars with local dimming turned on while in the game mode, all the local dimming seemed to do was get rid of some clouding but left the blacks looking greyish and hazy which obscured the clarity of the test stars. This is my first Sony tv and I really like the general picture quality but I've had tvs from other brands with local dimming that worked the same in all picture modes but the sony is the only tv where there is such a radical difference in how the local dimming is implemented in different picture modes and I was wondering why that is the case.

On the Home screen, double-tap with three fingers to exit zoom.
Then go to Settings > General > Accessibility and make sure Zoom is turned Off.
http://support.apple.com/kb/ts3129

7th gen Nano only works when plugged in, turns off when unplugged... battery is fully charged.

7th gen Nano only works when plugged into computer, as soon as I unplug it shuts off (it was ejected from iTunes). Battery is fully charged. Have already done a restore in iTunes and checked for updated software.

Hello there, DizDude.
The following Knowledge Base article offers up some good recommendations for troubleshooting battery issues with the 7th generation iPod Nano:
iPod nano (7th generation): Hardware troubleshooting
http://support.apple.com/kb/TS4433
Particularly this section:
Battery life appears short
Learn how to conserve battery life.
Ensure that the latest software is installed on the iPod.
When charging, use the cable that came with iPod nano (7th generation) and leave the device connected until it is fully charged.
Note: If you are charging using your computer, don't connect iPod nano (7th generation) to your keyboard. Also, the computer must be turned on and not in sleep or standby mode. If iPod nano (7th generation) is connected to a computer that's not turned on or is in sleep or standby mode, the iPod nano (7th generation) battery may drain.
When you are done using the iPod nano, verify that:
The Radio application is off (tap the button)
Music is paused (tap the button in the iPod application or disconnect the earphones)
There is no active Pedometer session (tap the Stop button in the Fitness application)
Dimming the screen is another way to extend battery life on iPod nano. Go to Settings > General > Brightness and restore the brightness to the default, or drag the slider to the left to lower the default screen brightness.
Playing tracks with EQ requires your iPod processor to consume more energy than playing tracks without EQ, because the EQ information is not encoded in the song. To prolong battery life, turn EQ off if you don't use it. Go to Settings > Music > EQ and select Off from the list. Note, however, that if you've added EQ to tracks in iTunes, you'll need to set EQ to Flat to have the effect of Off, because iPod keeps your iTunes settings intact.
Try restoring iPod nano (7th generation) by connecting it to iTunes and clicking Restore.
Test the battery life.
Issue not resolved
If the issue is still not resolved, please read this information on servicing your iPod.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Iphone 4: Home Button Not Working. The home button only works when it is connected to iTunes, once i disconnet it does not work, i have tried a restore to factory settings but it still is not working. Any suggestions?

iphone 4: Home Button Not Working. The home button only works when it is connected to iTunes, once i disconnet it does not work, i have tried a restore to factory settings but it still is not working. Any suggestions?

Apple, as I said, does not repair your iPhone. All hardware service issues are handled by replacing the unit. So they can't handle the home-button issue without also addressing the issue of the cracked screen, for which they'll almost certainly charge you. But you can make an appointment at an Apple Store or call Apple tech support and plead your case.
Regards.

With my i phone 4 , the Push notifications doesn't work for apps like (fb viber , whatsapp etc ) it only works for the official apps like message even when im using the phone, has this probleme with the iOs 6.0.1 and also with the iOs 6.1

With my i phone 4 , the Push notifications doesn't work for apps like (fb viber , whatsapp etc ) it only works for the official apps like message even when im using the phone, has this probleme with the iOs 6.0.1 and also with the iOs 6.1

This isn't an issue. Notice the screen prior to the one that shows usage has an iCloud section and a Manage Storage button. For this button to activate ios needs to download a few kb from icloud. Switching back to this screen forces ios to download those few kb.

View only works in one direction,will not change when I turn the phone

view only works in one direction,will not change when I turn the phone

Is the rotate lock on?
http://appletoolbox.com/2013/03/iphone-ipad-or-ipod-screen-will-not-rotate-fix/

I have a ipod mini from 2005, it will only work on my charger. I did get a new ipod 4touch, how do i get the music to the new one if i don't know the password of the mini. My ex-husband set it up for me, i not aboout to call and ask for the password.

I have a ipod mini from 2005, it will only work on my charger. I did get a new i pod touch 4, how do i get the music from the old mini to the new touch. I have never put any music on it myself, my ex-husband did it all and has the password. I never new it. I'm sure not about to call him and I don't think he'd give it to me anyway. Please help!!!

I don't think the password will matter, because you can't use anything on the iPod or in iTunes to transfer song files from iPod to computer (except for songs purchased from the iTunes Store). However, there are third-party methods and utilities that can transfer from iPod to computer. If you do a Google search on something like "ipod transfer," you should get some links.
The simple software "lock" used on iPods should not prevent you from off-loading the song files. Once the song files are on your computer, you can add them to your iTunes library. Then, you can do a Restore on the iPod to give it a fresh start and sync it (and the iPod touch) as desired.
NOTE: For songs purchased by you from the iTunes Store, you can also re-download them to your computer at no cost, from the iTunes Store Purchased screen. The link to Purchased is on the iTunes Store Home screen, under QUICK LINKS.

Boot Camp won't make a Windows XP driver disc, OS X disc only works with Win7

First time Mac user. Just got a new Macbook Pro.
I have successfully installed Windows XP on the Mac using Boot Camp. But I need the driver disc. The right mouse button doesn't even work and Windows is impossible to navigate without that. The disc eject button does not work, one has to eject a disc using laborious menus. Very frustrating.
When I run Boot Camp it only has the option to make a Windows 7 driver disc. I don't see any way to make a driver disc for Windows XP.
Everywhere I have searched on the Net the information says to put the OS X Leopard disc in the drive when WinXP is running and it will automatically install drivers. When I try that a window comes up saying it only works with Windows 7.
This web site shows screen shots of a Beta version of Boot Camp that makes Windows XP drivers discs.
http://www.askdavetaylor.com/how_do_i_install_windows_xp_on_my_mac_using_boot_ca mp_1.html
How can I make a Windows XP driver disc?
I really hope Apple didn't discontinue/eliminate the option to make a Windows XP driver disc altogether, forcing everyone to use Windows 7 only...
Is there a way to install an older version of Boot Camp over the latest version I'm running? Where would I find it?
Macbook Pro
OS X 10.6.7
Boot Camp 3.0.4
Thank you for your time in helping me on this.

The retail OS X 10.6.3 DVDs unlike your OEM DVD does have a complete set of drivers for $29 w/o having to deal with questionable bitorrent.
Microsoft EOL'd XP and Vista SP1.
Your Mac has Intel Thunderbolt and you don't see Apple doing backward compatibility. You can't run 10.5 on new Mac. So yes it comes with those limitations, but XP is also 20x more vulnerable, IE9 is more secure and XP has not kept up with the latest hardware, besides which I don't see a place or need for a 32-bit OS, any platform today.

After latest FP update, why does my website only work in Firefox.

I spent ages the other night trying to fix my website, as it suddenly stopped working in IE9. Tried all sorts of FP installs with no avail. Eventually went back to IE8, think 9 was the problem, and still my site won't work. Out of 4 browsers, IE8 (or 9), Opera, Safari and FF, only FF displays my site. If I understand correctly, FF doesn't use the same plugin as the rest. My question is, why does it only work in one browser, and not the others.
If I use my HTC Desire, the site works fine too.
Just to be clear though, this isn't just on one PC, it is on three. I have one running Win7 64-Bit, one running XP Pro, and one running Vista Business. None of them will display the site with IE8. Oh, and my WIn7 machine dual boots with XP Home, and that doesn't work either.
Even my Vista Business machine, which actually hosts the site, won't display it properly.
The site was created using SWF files built in Flash CS3, if that's relevant. One AS2 file, and 2 AS3 files on a page (usually)
You can check the site here www[DOT]digital[DASH]essence[DOT]co[DOT]uk
Sorry for the unfriendly address, I don't trust forums and website addresses.

It's the forums that make the image tiny, if you do a right-click > copy shortcut, you can then paste it into a new tab, which will let you see the full size image. It's a 3360x1050 image, maybe a bit big for the forums.
Basically though, the left image is IE, and that shows an error box. The centre image is Opera, and that shows an empty screen. The right image is FF, and that is how it should look.
If it's a machine specific error, then I can't work out why it is on several machines in my house... very odd.

User should only work on created Form

Hi all!
Here is my problem.
A user is working in B1. For example:With a double_klick on a Textfield and a user created Form will be shown.
No the User should only work with this Form until its closed! There should be no possibility to open an other form or so.
Like if you get a MessageBox, there is no other "normal" way to work on until you close this Messagebox.
May it is possible to let the Form act like such a Messagebox.
Thanks for replies..
Matthias

The Sample you speak of show the hack/workaround (Not true modal functionality).
From the sample:
    Private Sub SBO_Application_ItemEvent(ByVal FormUID As String, ByRef pVal As SAPbouiCOM.ItemEvent, ByRef BubbleEvent As Boolean) Handles SBO_Application.ItemEvent
        ' Don't let the user to move to other forms
        Dim EventEnum As SAPbouiCOM.BoEventTypes
        EventEnum = pVal.EventType
        If bModal And FormUID <> "Modal" Then
            oForm.Select() ' Select the modal form
            BubbleEvent = False
        End If
        ' If the modal from is closed...
        If FormUID = "Modal" And (EventEnum = SAPbouiCOM.BoEventTypes.et_FORM_CLOSE) And bModal Then
            bModal = False
        End If
    End Sub
In the sample the bModal bool set to true when opening the form block all events by selecting the modal form on each event and setting bubbleevent to false.. the EventEnum = SAPbouiCOM.BoEventTypes.et_FORM_CLOSE set the bModal to false so events can continue
Biggest problem with this is if you use a eventfilter (which you should do)... here you need to remove the event filter along with setting the BModal (not in the sample), and reapply it after form close.
<i>Kind Regards
Rasmus Wulff Jensen | http://www.b1up.net</i>

IBooks screen dim only works on 3/4 of screen

Similar Messages

Maybe you are looking for