IBooks stays in loop

I had to restore my iPad and on downloading all of my iBooks several of them will not  re-download they just stay in the loop and I cannot delete them or download I have no idea want is wrong need help. A.S.A.P please.
God bless
Joe DeFelice

If the question is already answered then you forgot to give points!
There is general assumption that you have either
loop at itab1.   ( n records)
  loop at itab2.   ( a records, a constant)
or
loop at itab1
  loop at itab2   where  key =   (m records in itab2, where m grows if n grows)
In the first case you have no performance problem, it scales with n.
In the second case, you have a performance problem if itab2 is standard table. But you can avoid it, if you use sorted tables.
You can also avoid it for standard tables by a workaround
read binary search, loop from index, exit
For details on the workaround see
Measurements on internal tables: Reads and Loops:
/people/siegfried.boes/blog/2007/09/12/runtimes-of-reads-and-loops-on-internal-tables
For background information on nonlinearity see
/people/siegfried.boes/blog/2007/02/12/performance-problems-caused-by-nonlinear-coding
Siegfried

Similar Messages

  • IBooks stays blank - cannot add files to library

    My iBooks library is simply blank. I cannot see the files I 'added' to the library. I cannot see the files it supposibly imported from my iTunes (which now no longer has a 'Books' section.
    Even tho i can open pdf's on my iPhone 5 just fine, none of those files can be seen anywhere in iBooks on my Macbook Air (Maverick), even tho iCloud i enabled and works fine in all other apps.
    When i try to add files to my library it asks me if i want to replace the files they match that are already in it (again, these files cannot be seen), but it makes no difference whether i tell it yes-replace or no-cancel at that point: my iBooks stays blank.
    I cannot uninstall iBooks because it says it is required by OS X.
    When i open the app, view its info or try to delete it my whole laptop laggs.
    Someone please please help. I haven't been this frustrated with a computer since i was still using pc's

    This message was posted in error as an aswer to a different  question.
    Message was edited by: themachead

  • TS1702 Sometimes my purchases in iBooks stay as 'sample' or display 'paused'...wi-fi is functioning well.

    Sometimes my purchases in iBooks stay as 'sample' on the library shelf, or 'paused' although wi-fi is connected.  And the titles exist in my Purchased section of the app!  Can you suggest a way to actually open and read these stalled books?  I've tried restarting iPad2, opening the book from Store or Library  or Authdor Page.

    Additional things to try.
    Turn Off your iPad. Then turn Off the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    On your iPad go to Settings > General > Reset > Reset network settings and see if that enables you to connect.
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
     Cheers, Tom

  • Does anyone know how to add Audio to iBooks Author and Loop it continuously

    I need to Loop a 2 second piece of audio in iBooks Author.  When I Preview it on my iPad it doesn't Loop correctly.  Can anyone please help me with this strange problem.
    Thanks in advance.  David

    Hi K T,
    Still having lots issues with Looping.  Was wondering if you were able to import any short drum loop for example from Garage Band or Logic or similar into iBooks Author and select the Loop option.  Do you get a gap or buffering effect before the audio repeats?  I've tried so many different audio types now and think it must be a bug with iBooks.  The gap only occurs when opened or played in iBooks.  I just want to confirm that it's not just my system that has the problem.  I have tried it on iPad 2 and iPad with Retina, but not iPad Air.
    Any suggestions?
    Thanks David

  • Satellite L500-1XL does not boot properly - stay in loop

    The above machine was working fine until today.
    Then when I switched it on, it just sat on the Toshiba page, asking me to press F2 or F12.
    I wasn't sure what to do so I ran the (factory) recovery disk which all seemed to install ok but....
    Now when I switch it on, it shows the initial Toshiba splash screen and stays there until I manually press F12 to select to boot from the hard drive.
    From there it takes me to Windows Boot Manager and I have to select the windows 7 o/s.
    Then I get the "starting windows for the first time" screen for a minute or so until it restarts and I have to press F12 again.
    It just repeats all this over and over in loops.
    I've tried the recovery disk again but the same is happening.
    I've been in the bios and made sure the hard drive is set as the first boot device, and I've set the bios to default, but nothing seems to make any difference.
    Any help/advice greatly appreciated.

    Thanks for the suggestions.
    Instead of using the factory recovery disk, I tried a retail windows 7 disk and deleted all partitions. Windows 7 then fully installed and I no longer have the loop.
    At switch on though, I STILL have to press F12 to select the hard drive, then select Windows 7. The laptop then boots up without incident and is useable.
    I thought maybe the master boot record might be damaged on the hard drive so I've just fitted another sata drive, but still the laptop behaves the same.
    I've tried updating the bios with the latest version as well but that has made no difference.
    Why is this happening? I've since found out that I can press ENTER at the splash screen instead of F12 if this offers any clues. This takes me to Windows Boot Manager as well where Windows & is the only choice. Pressing enter again allows windows to boot normally.

  • Virtual store registration - staying in loop

    Tried to register for the virtual store on the Journ.e touch keeps taking me to download an update and reboot once this has happened and I try to enter the virtual store I go back to the registration page. This loop keeps going any ideas

    Maybe the account needs to be reset?
    If you want an account reset you should ask here in the forum for that procedure.

  • Airport in iMac versus iBook G4

    it's creazy,
    my airport internetconnection is doing great with my iBook G4
    the signal is strong (3 tot 4 bars)
    and than my iMac ... that is a disaster
    sometimess a connection is just not possible
    and when it works I'am happy to have '1' bar
    saying this, my iBook stays at less than a meter (1 m) from the iMac.
    so, it isn't the express making the mistakes, it's the hard- and software in the iMac.
    anyone interested in answering this ?
    thank you in advance
    3Peter
    iBook G4iMaceMac   Mac OS X (10.4.9)  

    eh ! I'll try to answer that
    I'am not a specialist :
    iMac 4,1
    Inter Core Duo
    2 GHz
    1 processor
    Cores : 2
    L2 : 2 MB
    Memory : 2 GB
    667 MHz
    does this help ?
    maybe also this
    airport card : Airport Extreme (0x14E4, 0x89)
    firmwareversion : Broadcom BCM43xx 1.0 (4.80.79.1)
    this iMac was bought last year in juin,
    I think it was one of the first of the new generation
    greetings
    3peter

  • Reading PDF in iBook

    If I try to read pdf in iBook - it is  opening them in preview.
    Changing the default app to read pdf to iBook gets iBook into infinite loop!
    What is the procedure to *open* pdf in iBook and not in preview?
    IBook is not opening any pdf.

    yes, it is so annoying, it crashed my ibook, it should just SIMPLY open in ibook, feel a bit disappointing.

  • Firewire problems on Ibook graphite 466

    Hi,
    my Ibook 466 has problems with firewire port.
    First, i've noticed after installing OSX 10.3 the firewire port was not working and not recognized in system info.
    I got the idea of firmware upgrade: 4.1.7
    Then it works. after a few system upgrades to 10.3.9 and to 9.2.2 for Classic, I was confident and tried to connect a firewire external drive, no way, the port was not recognized again, it sounds like dead !
    But I didn't give up, I reinstalled OSX again, nothing !
    I tried booting in open firmware and reset all, nothing !
    I zapped the PRAM, the Ibook stayed blocked, no boot, maybe don't know if he goes to OS9 or OSX ??
    I put my OSX CD, and choosed a new startup disk, so I boot on my internal OSX partition. Then miracle my firewire port was OK.
    What is this ? So, I wanted to titillate my brain, I run Classic, and then I went to check my firewire port. Result: it disappeares. So the problem is caused by Classic, why ? that's the question.
    I did this experiment twice, same result : as soon as I run Classic, I loose my firewire port !
    thanx for your help

    it's just a simple question for you, but difficult for me
    <my Ibook 466 has problems with firewire port.
    First, i've noticed after installing OSX 10.3 the firewire port was not working and not recognized in system info.
    I got the idea of firmware upgrade: 4.1.7
    Then it works. after a few system upgrades to 10.3.9 and to 9.2.2 for Classic, I was confident and tried to connect a firewire external drive, no way, the port was not recognized again, it sounds like dead !
    But I didn't give up, I reinstalled OSX again, nothing !
    I tried booting in open firmware and reset all, nothing !
    I zapped the PRAM, the Ibook stayed blocked, no boot, maybe don't know if he goes to OS9 or OSX ??
    I put my OSX CD, and choosed a new startup disk, so I boot on my internal OSX partition. Then miracle my firewire port was OK.
    What is this ? So, I wanted to titillate my brain, I run Classic, and then I went to check my firewire port. Result: it disappeares. So the problem is caused by Classic, why ? that's the question.
    I did this experiment twice, same result : as soon as I run Classic, I loose my firewire port !
    thanx for your help >

  • Stuck in Windows Startup Repair Loop - U410

    Hey guys, back with another problem. I'm this close to just giving up on this laptop.
    I had used the laptop last night like to normally do - emailed some people, checked the mail, wrote some homework up. Shut down normally when I was done. I opened it this morning only to find thecomputer going into Windows Startup Repair.
    I shrugged and said okay. the repair happened quickly and it then took me to the normal loading screen.
    At which it stayed on loop for about an hour (I was able to watch a movie in the meantime on my phone only to see that it still wasn't done). I then forced shut down through the power button. Waited roughy a minute and then started t up again. This time I picked the option of Start Windows Normally hoping to see if a shut down from there would fix the problem. Only it was stuck on the loading screen for about twenty minutes.
    Force shut down again. I went back to starting windows repair like it prompted me to do. Another hour wait at the looping startup screen.
    I wish I could post a picture of the thing for you to see.
    This is roughly my sixth or seventh time trying to start the computer.
    I've also tried that method with the NOVO button as some posts say to do, but nothing is happening.
    Should I just take the laptop into my nearest bestbuy or future shop??

    I can't seem to access safe mode at all - I did the option of pressing F8 repeatedly but it seemed to ignore it and go into the option of either starting the Repair or running windows normally. 
    Once it does the repair, it stays on this screen indefinitely. The same goes with trying to start windows normally - it stays on the Loading Windows screen. 

  • Can i have sync and async listeners for the same queue ?

    Hello,
    I am a novice in JMS. Wondering experts over here could throw in some light !
    Can I set both synchronous and asynchronous listeners for a perticular queue.
    eg: pseudo code.
    status; // default to start
    run()
    setListener(Q1); // listener sets status to stop
    while(1)
    waitForUserPrompt(value1);
    switch(value1)
    a: fun1();
    break;
    b: fun2();
    break;
    fun1()
    while(status != stop)
    stay in loop.
    fun2()
    // synchronously wait for "stop"
    receive(Q1);
    // wait and do following important code!
    }

    Hi,
    I don't know in Chrome, but in Safari (pc or mac) you can open icloud.com twice on two different tab or windows and open one with contact and the other in Mail without messing up.  What kind of mess to do you experience?
    There is no other options to do what you want to do.  You need to click on the little top cloud to switch from one to another.
    Beside, I don't understand why even 2 open tab would help more than having to switch via the cloud icon.  I may need to cut/paste some info from contact or calendar from time to time, but switch via the cloud icon is not really painfull.

  • Adobe Edge Animate CC don't start in Windows 8.1

    Adobe Edge Animate CC does not start in Windows 8.1. I click on the application and the cursor stays in loop. I have tried to uninstall to reinstall it and will not let me. If they know of any similar error and resolve it I would like to help me, thanks.

    Are you running the Spanish version of Win 8.1, Conisus?
    Have you tried resetting preferences (http://adobe.ly/Ty949V), disable any third party plug-ins and/or launch the software in a new user account with admin rights? http://helpx.adobe.com/x-productkb/global/troubleshoot-system-errors-freezes-windows.html# main_Common_solutions
    If the basic troubleshooting steps don't work, would you mind to gather a copy of the crash log, paste it into http://pastebin.com and share the url? You should be able to locate the log by launching the Event viewer and search for the application crash logs of Illustrator.exe. Thanks!

  • IPad mini Wifi 64GB Black Crashes frequently

    I have an iPad mini Wifi 64GB Black, it frequently crashes when I'm using it, this can happen at anytime, for example, when reading a book in iBooks, playing Chess, using safari etc.
    Has anyone else had this problem? If so, we're you able to resolve the issue somehow?
    Thank you in advance.
    Gunker

    The most likely reason for things to crash is lack of available memory. This is not your 64GB storage, it's the 512MB RAM that keeps things running. The easiest and quickest way to free up RAM is to terminate apps that you are not using at the moment.
    Either double click the Home button or do a 5 finger swipe up to expose the running apps. Press and hold on one of them until they start to jiggle, then tap the red minus sign to close the app.
    I tend to close anything I'm not using regularly, so usually just email, Safari and iBooks stays open.

  • Black vs. White (yes, another) Help

    Sorry to ask this again, I know it's been beat to death but i DO have a Black MacBook but I'm considering trading it in for a white and I need some advice. I know the white scratches but scratches stay white, right? So scratches on the outer case shouldn't look too bad, do they? (I wouldn't know...never owned an iBook).
    However, with the black, I'm so anal about keeping my computers looking nice, at least for the first few months to even a year. The Black MacBook shows grease and oil from my fingers on the trackpad and even on the keyboard. Am I correct in assuming the white does not have this problem?
    Also, DUST. The black one shows any little spec of dust that lands onto it and I find myself constantly blowing it away or trying to sweep it off.
    I know you can easily wipe the oily mess away with a damp cloth afterwards but that seems like a lot of upkeep. Granted, it is my own fault, but I don't like the looks of an oily keyboard and trackpad. Just looks so unattractive.
    So I'm just looking for some advice whether jumping over to the white one sounds like a good idea or if I should just stick with the black one? Also, would apple charge me a restocking fee even for this type of exchange?
    Sorry for making so long but thanks for any advice you may have - I always like to get second opinions and see how others view the situation.

    My family has own white iBooks ever since they were introduced by Apple. They all get scratched, show black looking dirt, look grubby after a short while and do show finger prints depending on light reflection etc. My wife's iBook stayed the cleanest because she wasn't a heavy user and she was only one using it.
    My wife now has the Black MacBook and she couldn't be more pleased with it - me as well. It does not show the black looking dust and crud, finger prints aren't a problem unless you have greasy finger tips which can be removed easily with a RadTech cloth, and scratches will no worse than for the White IMO and may not show up as badly on Black vs. White.
    After many years with white iBooks it's a pleasure to have the Black option.
    No matter, I believe white or black will have their negatives and much of this will depend on how the MacBook is used or abused.
    Keep the Black MacBook if I were you. However, if you continually worry about the Black issues you've described then move over to a White one and get on with your life, so to speak.
    Restocking fee will quite likely be charged after 14 days I believe.
    Good luck.

  • Error 401 message for facebook

    My daughter logged me out of my facebook app then when I tried to log back in I got this message "sorry an unexpected error occurred. Please try again later error code 401 FBAPIEErrorDomain"  It is driving me crazy -I even tried changing my password- Does anyone know what is wrong or what to do?

        Tasha36 lets make certain that you stay in loop! We'll make certain to do everything we can to get you logged back into Facebook. Fill us in on the details and we'll get right to work. What device make/model do you have? Are you able to log in through the browser?
    AshleyS_VZW
    Follow us on Twitter @VZWSupport

Maybe you are looking for