IBooks v1.2 upgrade or not?

I wonder if I should upgrade to iBooks 1.2. In the user reviews I see a lot of people having trouble (missing books, all PDF's have same cover, ...) and some say not to upgrade.
Should I skip this version, or does it work OK for most people?

You are right. I have a PDF document that won't show up in iBooks, no matter what I try. The strange thing is, it showed up before. But after a few times updating this document it suddenly doesn't show anymore on the bookshelf.
This is really annoying.
Edit: when I add an extra PDF in iTunes and then sync, both files show up in iBooks. So it might as well be a problem of iTunes too.

Similar Messages

IBook G4 suddenly freezes, does not go beyond blue screen

My iBook G4, recently upgraded to 10.5.2, suddenly went into a freeze, where neither the mouse nor nothing else would move anymore. I had to shut down by pressing the power button. When starting anew, I did not get past the blue screen. Same problem when trying to start in Safe Mode. I managed to get past the blue screen twice, with long intervals in between start-ups (ie. starting from cool), but the machine immediately froze up again in the first 10 seconds. Since the machine had the same problems two years ago, I am suspecting the Logic Board (yet again), although the Board was exchanged by the Mac Service in 2006. I backed up all the data in Transfer Mode without problem, so the HD seems to be unaffected. I cannot start the iBook from the disc so cannot run TechTool or Disk Utility. Please help.

Thanks - none of these problems seem to refer to my own blue screen problem, which did not occur just after updating to 10.5 or 10.5.2 - I had the software running without problems for weeks now. So it must be something new coming up. I ran a hardware test on the machine, and no logic board or hard disk problem was found. So it seems to be something else. Without being able to start on the installation disk, I can't even do an archive and install.

The latest upgrade is not compatible. it says error run platform 17.0.1 is not compatible with min version 17.0 max version 17.0

the latest upgrade is not compatible and is not allowing me to open firefox. the error message says run error platform 17.0.1 is not compatible with min version >17.0 max version <17.0

hello paisley157, this error might be caused by security programs such as zone alarm - please temporarily disable those programs for the following procedure:
*download the full firefox setup file from getfirefox.com
*uninstall firefox on the machine (but don't chose to delete your custom files & settings in the uninstaller!)
*manually delete all remaining files in the firefox program folder, which usually resides in ''C:\Program Files (x86)\Mozilla Firefox\''
*reinstall firefox

I have an apple id but ı can not use it for sign in to itunes connect account while publishing my ibook document. Why ı can not login? What can ı do to figure out this problem?

I have an apple id but ı can not use it for sign in to itunes connect account while publishing my ibook document. Why ı can not login? What can ı do to figure out this problem?

As note already on the iBA forum [ AppleID for ibooks publishing ], you need two IDs. You can't use your developer ID.
If you already signed up for books with that ID, you need to talk to Apple to straighten things out.

I am getting the following error: Unable to authenticate the package: B_SPACE_NUTRITION.itmsp ERROR ITMS-9000: "OPS/ibooks.ncx(5): element "content" not allowed yet; missing required element "navLabel"" at Book (MZItmspBookPackage)

I am getting the following error when attempting to deliver my iBooks Author book package via iTunes Producer: "
Unable to authenticate the package: B_SPACE_NUTRITION.itmsp
ERROR ITMS-9000: "OPS/ibooks.ncx(5): element "content" not allowed yet; missing required element "navLabel"" at Book (MZItmspBookPackage)"
I understand that there's something wrong with the TOC file (.ncx), but I have tried everything and nothing seems to work. Every section of the TOC is labeled, so not sure why the navLabel issue is happenening.
Any help is GREATLY appreciated! Thank you.

Similar issues looks like. Are you using a template other than those in iBooks Author? That's what I did, and that was definitely part of the issue.
After digging through .ibooks code for hours and still not seeing the problem, I decided to reach out to one of the Apple epub conversion affiliates in iTunes Connect. They said they could repair the file without a problem, started working on it, only to come back a week later and say they couldn't work on .ibooks or .iba files yet.
So, in complete frustration, I decided to transfer my content page by page from the blank template I downloaded from a vendor online to one of the "textbook" templates in IBA. This was a long process as I had to unlock and clear out the formatting of the template. But, once that was done and content was transferred over, all was good. I submitted/delivered the same content and preview book within the new template and it went right through the first time (all metadata was exactly the same as well).
Now, the iBookstore approval waiting process begins!
Good luck!

The current iTunes 10.5 upgrade does not install on Windows 7 and indicates a faulty install package (error 2324). Advice or details on the release date for a proper fix?

The current iTunes 10.5 upgrade does not install on Windows 7 and indicates a faulty install package (error 2324). Advice or details on the release date for a proper fix? I'm not able to roll back to the prior version, so I'm stuck in limbo.

There have been a number of problems with installing the latest iTunes on Windows 7 64-bit machines during the last couple of weeks. You might want to do a search on that topic and see if anyone has a solution. There have been various versions of the problem but a lot related to errors in the download package or failure to download.

IBooks Author. I am not allowed to sign in with my Apple ID on iTunes Connect when I am trying to publish my book in iBooks Author. I do not understand why because I have fulfilled the first steps creating an account and informed my IRS tax number...

I am not allowed to sign in with my Apple ID on iTunes Connect when I am trying to publish my book in iBooks Author. I do not understand why because I have fulfilled the first steps creating an account and informed my IRS tax number...

The recommendation is always to make another ID for use with a paid books account. And while I can't swear this is at the root of your issue, you should in any case reach out to Apple for assistance on this one, I think.
Account Applications:
[email protected]
Global Phone Support
We have expanded English-language publisher phone support. To make contacting the iBookstore support even easier, new local phone numbers are now available for Australia, France, Germany, Italy, Netherlands, Spain, and the U.K. Support is available Monday to Friday, from 7 a.m. to 5 p.m. (PT).
Country
Phone Number
Australia
1300 307 504
Note that this is a low tariff number.
France
0805 540 117
Germany
0800 664 5307
Italy
800 915 902
Netherlands
0800 0201 578
Spain
900 812 687
U.K.
0800 975 0615
U.S.
+1 (877) 206-2092
Toll-free from U.S. and Canada.
Good luck

My Note 3 had 220 contacts, upgraded to note 4 and now have 72 contacts and my Verizon Cloud app shows error code 4600. How do i get my remaining contacts?

I had a Note 3 and had 220+ contacts. While I had it I performed a factory reset several times and always got all of my contacts restored. My phone was upgraded to Note 4 at my job yesterday. I completed a factory reset on My Note 3, turned it into my IT department and received my Note 4. My phone had since only has 72 contacts (it was 56 then 76 and now 72). When I run the Verizon Cloud app it will display an error code 4600. While in the Verizon Cloud app, if I open detailes about contacts it states there are only 5 contacts. i did use the Backup assistant on the Note 3 but that app is not found on the Note 4.
I went by the Verizon store yesterday, the rep stated that she needed the old phone (it was wiped),
How can I restore the remaining contacts to my Note 4 from verizon?

Thank you for reaching out to us, todfloyd. Sorry to hear about your contacts not all syncing correctly to your new Note 4. Let's see what we can do to get them all over to your new phone. Have you had a chance to view your contacts via your My Verizon page? Once you have logged in, please hover you mouse over the My Verizon Tab, and click on the View All option at the bottom of the pop up.
Once the page loads, please view the options on the right hand side. Under Additional Actions, please choose Manage my Contacts and Media.
Do all of your contacts appear there?
NicandroN_VZW
Follow us on twitter @VZWSupport

TS1702 PrintDirect Application Upgrade does not reauthenticate on iPad Air.

Hi
Can anyone assist me please.
I purchased the PrintDirect Application for both my iphone 5S and new ipad air, both are running latest IOS software. The app. is downloaded first as a free app, then with purchase of an in-app upgrade to obtain full features. On the iphone 5S all is fine, on the ipad air the upgrade is not reauthenticating. By that I mean that when the upgrade is first downloaded, all is fine. After closing the app and re-starting the upgrade is stated as installed but does not function. if i download again for free, the app works correctly......until I close it and try to start again. The only way I can get it to work is to download the update again each time I wish to use it. I have tried deleting and re-installing from scratch, turning ipad off/on, etc, but no change.
App providers have not been able to help, suggest I contact itunes, waiting on call.
has anyone else had this problem with this app or others.
thanks
Ray

See:
iOS: Troubleshooting applications purchased from the App Store
Contact the developer/go to their support site if only one app.
Restore from backup. See:
iOS: How to back up
Restore to factory settings/new iPod

Anyone know how to fix this error: RROR ITMS-9000: "OPS/ibooks.ncx(5): element "content" not allowed yet

Trying to publish an iBook and having major problems at the last step. Here is my error message:
Apple's web service operation was not successful
Unable to authenticate the package: B_SPACE_NUTRITION.itmsp
ERROR ITMS-9000: "OPS/ibooks.ncx(5): element "content" not allowed yet; missing required element "navLabel"" at Book (MZItmspBookPackage)
Any advice???

Similar issues looks like. Are you using a template other than those in iBooks Author? That's what I did, and that was definitely part of the issue.
After digging through .ibooks code for hours and still not seeing the problem, I decided to reach out to one of the Apple epub conversion affiliates in iTunes Connect. They said they could repair the file without a problem, started working on it, only to come back a week later and say they couldn't work on .ibooks or .iba files yet.
So, in complete frustration, I decided to transfer my content page by page from the blank template I downloaded from a vendor online to one of the "textbook" templates in IBA. This was a long process as I had to unlock and clear out the formatting of the template. But, once that was done and content was transferred over, all was good. I submitted/delivered the same content and preview book within the new template and it went right through the first time (all metadata was exactly the same as well).
Now, the iBookstore approval waiting process begins!
Good luck!

R12 upgrade issue:Not able to login using forms:Please help****urgent

We have recently upgraded our instance from 11.5.9 to 12.0.4 in Windows 2003 server.
We are unable to login to forms after upgrade, however we are able access self service responsibilities without any issues.
We are getting APP-FND-01496 when we access any forms responsibility. We have tried all possible metalink notes with no luck.
Any help to resolve this issue will be appreciated.

Duplicate thread ...
R12 upgrade issue:Not able to login to forms**please help
Re: R12 upgrade issue:Not able to login to forms**please help

IBooks 2.2.ipa does not replace app 1.1

In Mac 10.8.2 Applications, the download iBooks 2.2.ipa does not replace iBook Author.app v1.1. TIA

Lucky you, it did not work for many users (which as it should be) so MS produced a new version, for ML and Mavericks.
It's in the App Store, for free.
FYI, I assume that you were attempting to post a picture, no one can see it (except maybe you) because it is on your computer rather than the forum server.
file:///Users/dbrant/Desktop/About%20Apple%20Remote%20Desktop%203.7.1.webloc
Use the small camera icon in the editor toolbar to post it.
It also looks like you attempted to use Apple Remote Desktop, which does not do Windows.

Issue while Upgrading to SQL 2014 from 2012. " The specified Edition upgrade is not supported."

Hello Team
I am seeing this issue while I am trying to do an in-place upgrade from SQL Server 2012 to SQL 2014. Both being Enterprise Editions I am still seeing the below error message in the Feature Upgrade checks.
" The specified Edition upgrade is not supported"
Please let me know if anyone else has faced this issue and any workarounds? I am not doing "Edition Upgrade", just wanted to upgrade same edition of 2012 to 2014.
SQL Server details that is being upgrade:
Microsoft SQL Server 2012 (SP1) - 11.0.3368.0 (X64)
May 22 2013 17:10:44
Copyright (c) Microsoft Corporation
Enterprise Edition: Core-based Licensing (64-bit) on Windows NT 6.2 <X64> (Build 9200: )
thanks

Hi Shanky_621
Thanks for the reply. Yes I was told that it is SQL 2014 Enterprise Edition. Is there a way to verify that? Also yes I did not select the free Evaluation or Express Editions.
Just run the setup you got for SQL server 2014 and you would reach to page where it would say enterprise or standard after that cancel the setup . Actually version number can be found from Mediainfo located in same folder where setup.exe is located but edition
cannot be found by that way.
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles

I've upgraded to Yosemite. Iphoto is out of date and won't open. I'm being directed to the app store for a free upgrade but there is nothing there. being told 'upgrade is not available in the US'

I've upgraded to Yosemite. Iphoto is out of date and won't open. I'm being directed to the app store for a free upgrade but there is nothing there. being told 'upgrade is not available in the US'

iPhoto is no longer available from the Mac App Store. Update to 10.10.3 and use Photos.
(125792)

Adobe Flash Upgrade will not install after Firefox upgrade to 3.6.7

I upgraded to Firefox 3.6.7. After the upgrade I got a message that I needed to upgrade Adobe Flash due to security vulnerabilities. The Flash upgrade will not install. It simply sits and never installs no matter how long I wait.
== This happened ==
Just once or twice

Thanks for your response. I have previously reviewed this. The only potential problem it seems to resolve is having 2 versions of Shockwave installed. I only have one. The only thing I can think of to do is just uninstall the one version and see if it will trigger an installation. When I go to the Flash install site, I agree to the terms and get the next screen that says download will start. I never get a message asking if it's ok to run or anything. No matter where I look for a download for Flash I wind up at the same place with the same problem. Any suggestions would be most appreciated.
Thanks

IBooks v1.2 upgrade or not?

Similar Messages

Maybe you are looking for