IBooks with the same tittle and cover, are possible?
Hello.
I have a free account and I'm planning to upload a free iBook, a short version of my future iBook.
Later, I'll have a paid account and I will want to sell the iBook full version, with the same tittle and cover.
Is it possible?
Thankyou very much.
They are two different accounts - so yes whatever is in your free book - can be delivered to the paid book account.
Obvioulsy if you do that, you may wish to remove teh free book from the iBooks store.
Do this by openeing iTunesConnect > Manage your Books, select the book you want to remove and using Pricing and Territories... removes the book from all 51 stores.
You can never actually delete the book, what you do is "hide" it from the store and it becomes unavavailable online.
Similar Messages
-
Who can shed some light on my ongoing connection problem.
After upgrading my iPad Air with IOS 7.06, I could no longer connect to the internet.
I have 2 MacBooks Air, 1 ipad mini and one iPhone 4S running on the same network, and they are all connected to the net and function well.
So I cleaned up the ipad completely, installed the latest firmware and reinstalled my apps : no connection.
I tried all things of resets and forgets. No result.
I have been fondling with my Airport Extreme 5 , but that did not help much.
This morning I went to a neighbor , hooked my ipad air on his network, typed the password and the thing all worked fine.
I have tried to connect the ipad air as an ethernet client, but that did not work. „Not enough power“ was the statement
Ideas anyone ?Yes I tried this manyfold. But did not work. Reading on, I took Tesserac's advice. Shut down router and computer.
Start router after 15 minutes and wait another 10 minutes before starting the computer.
Et voila.... everything is back in working order,
Regards form Curacao, Dutch Caribean.
Pete van Linden -
a project on iMovie 09 that Freezes(only the project) the viwer window blocked in gray ... .. After editing that took me a year I'm stuck .
All my finished projects that are in the Library infected with the same symptoms and it happens only after I went into the problematic project.
I tried to open a new project and everything works
...I also tried throwing Recent Files, in the past It solved the problem ,not this time ...
the problem is that this project will take me a long, long time to rebuild
imovie 09
Model Name: iMac
Model Identifier: iMac10,1
Processor Name: Intel Core 2 Duo
Processor Speed: 3.06 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 3 MB
Memory: 4 GB
Bus Speed: 1.07 GHzThis recently happened to me. I am a novice, but it seemed like that project got corrupted some how.
I deleted it.
Went to time machine and picked it up again when I knew it was working ok.
I lost a few hours of work, but not the entire project.
Once I had the project back from time machine, it worked fine (but like I said, I lost a little bit of work). -
LR is putting different descriptions of the same lens, used with the same camera, in the metadata of photos taken on the same occasion.
For example:
The following two images were taken with the same camera and lens.
They were imported at the same time into LR by copying.
The only difference in treatment is that the first was an untouched out-of camera jpeg, the second had been flipped using Preview on the Mac.
The one that was flipped has a full description of the lens, the one that was untouched has an abbreviated description.
When you show the file in the Finder and read the metadata using Preview, the correct full lens description appears.
Why is LR displaying the metadata differently for these two files?Can you zip up a few of your GoPro images, upload them to dropbox.com and post a share link, here, so others can experiment with them, or do you mean this issue is global to all camera models?
-
SharePoint 365 Deploy App -- "another App with the same version and product ID."
Hi all
When I want to deploy App I got this message:
2>Active Deployment Configuration: Deploy App for SharePoint
2> Skipping deployment step because a pre-deployment command is not specified.
2> Skipping the uninstall step because the app for SharePoint is not installed on the server.
2> Install app for SharePoint:
2> Uploading the app for SharePoint...
2>Error occurred in deployment step 'Install app for SharePoint': The provided App differs from another App with the same version and product ID.
If the App exist why it doesn't uninstall it. And also its not possible to Retract:
Skipping the uninstall step because the app for SharePoint is not installed on the server.
I solved my problem by changing ProductID manually but I don't want to make the server with dirty small apps.
Any idea?
ThanksHi,
Check the Site URL in project properties to which the app is installed.
You have to choose the right path first where the app is installed and then Build>Retract.
Then change the path to new one and try build. It looks like you are trying to retract from wrong Site URL.
Thanks
Jashandeep K -
Query parameters with the same name and different values
According to HTTP, multiple query or post parameters with the
same name and different values are permitted. They are transfered
over the wire in the following format -
name1=val1&name1=val2&name1=val3
The problem is that I can't see anyway of assigning multiple
parameters with the same name and different values to the request
object of mx.rpc.http.HTTPService. I have tried using the
flash.utils.Dictionary object as it does strict key comparison but
that doesn't work too. I have tried setting an array of values to a
property of the request object but that sends the request to the
server in the following format -
name1=val1,val2,val3
The java servlet engines throw exceptions when they see this.
Any help would be greatly appreciated.If you're not on 8.1.4 move there. 8.1.3 had limitations in the wsrp
release.
wrote:
I have an html select box that contains several values, and multiple
selection is enabled. When my code runs as a remote portlet, the
following is showing up in the soap monitor when I select multiple
values and submit the form:
<urn:interactionParams>
<urn:portletStateChange>cloneBeforeWrite</urn:portletStateChange>
<urn:interactionState>_action=addEmployeesToGroup</urn:interactionState>
<urn:formParameters
name="P62005wlw-select_key:{actionForm.selectedEmployees}OldValue">
<urn:value>true</urn:value>
</urn:formParameters>
<urn:formParameters
name="P62005wlw-select_key:{actionForm.selectedEmployees}">
<urn:value>beatest1</urn:value>
</urn:formParameters>
In this case, I selected beatest1 and beatest2, but only beatest1 comes
through to the remote portlet. Is this a known bug, and, if so, is
there a patch or workaround available?
Thanks in advance,
Andy -
i changed my sim on my iPhone n reconfigured iMessage, it configured with my number but when i sign in with my apple id it says username/password is wrong while in all other things like FaceTime, App Store it worked with the same id and password..
can anyone help me to solve this issuei just opened my ipad, started my apple account/I.D. and realized I put the wrong e mail. I was having trouble correcting my I.D on the Ipad so I went to my laptop and make the proper changes/slash e mail address I wanted for my apple ID. I got back to my ipad and try to download an app I can't because I have to sign in my apple account and I can't because it still has the irrelivant I.D/email address..
So, i did what you said.. went to setting>app store> tapped on my e mail.. it asked me to sign in (with my invalid emails address showing). I signed in with the password I had created. It said "incorrect".. I went to reset password. I reset password, tried to sign in and it says again "unvalid password".. this is getting irritating. I have been asking and no one knows what to do. -
Hi all, i can't sync over wifi between my iPhone 4 and Windows 7 64 bit, wifi sync works with the same phone and my Windows 8 machine so the problem seems confined to Windows 7. I've tried solutions from other threads -
Making sure everything is allowed through firewall
Rebooting phone/laptop/router
Disabling ipv6
Disabling all networks except the one curently on
Re-installing iTunes
Restoring iPhone
No luck with any of those unfortunately so i just thought i'd see if anyone else is still without wifi sync after trying those as well and if you ever found a fix, thanks.I just wanted to leave a note that it's working now. I'm not sure if it was the latest iTunes update that got it working or that i decided to start a new library instead of using the one i had backed up on Windows 8 (it didn't occur to me to check using the old library when i re-installed iTunes). But if anyone is having this problem, it might be worth trying again with a new installation of iTunes to see if the latest update works for you, and if not, try using a fresh library instead of a backup (by fresh library i mean discard your old library completely and start a new library, not just restore as new iPhone, a whole new library).
-
How to display data with the same text and key in the drop down list?
Hi All,
Would like so to seek for you advice on the above mention topic. How to display the data with the same text and key using function module 'VRM_SET_VALUES'. From my testing by writing a program, this function module will only show the text and key if both have different data. Please find the coding as below. Is the normal behaviour of this function module? How to overcome this problem? Thanks in advance.
REPORT ZTESTING.
TYPE-POOLS: VRM.
DATA: NAME TYPE VRM_ID,
LIST TYPE VRM_VALUES,
VALUE LIKE LINE OF LIST,
c(20) type c.
* c = 'select any'.
data:begin of itab occurs 0,
kunnr like kna1-kunnr,
name1 like kna1-name1,
end of itab.
data:begin of jtab occurs 0,
kunnr like kna1-kunnr,
land1 like kna1-land1,
end of jtab.
PARAMETERS: p_list(20) AS LISTBOX VISIBLE LENGTH 20
default 'SELECT'.
AT SELECTION-SCREEN OUTPUT.
NAME = 'p_list'.
VALUE-KEY = 'Name'. "---> Data for key is the same with text
VALUE-TEXT = 'Name'. "--> Data for text is the same with key
APPEND VALUE TO LIST.
VALUE-KEY = '2'.
VALUE-TEXT = 'Country'.
APPEND VALUE TO LIST.
CALL FUNCTION 'VRM_SET_VALUES' EXPORTING ID = NAME VALUES = LIST.
start-of-selection.
select kunnr name1 up to 20 rows from kna1 into table itab.
select kunnr land1 up to 20 rows from kna1 into table jtab.
case p_list.
when '1'.
loop at itab.
write:/ itab-kunnr,itab-name1.
endloop.
when '2'.
loop at jtab.
write:/ jtab-kunnr,jtab-land1.
endloop.
endcase.
<Added code tags>
Moderator Message: Please use the "code" tags to format your code snippet.
Edited by: Suhas Saha on Nov 17, 2011 11:19 AMshawnTan wrote:
Hi All,
>
> Would like so to seek for you advice on the above mention topic. How to display the data with the same text and key using function module 'VRM_SET_VALUES'. From my testing by writing a program, this function module will only show the text and key if both have different data. Please find the coding as below. Is the normal behaviour of this function module? How to overcome this problem? Thanks in advance.
>
>
REPORT ZTESTING.
>
> TYPE-POOLS: VRM.
>
> DATA: NAME TYPE VRM_ID,
> LIST TYPE VRM_VALUES,
> VALUE LIKE LINE OF LIST,
> c(20) type c.
>
> * c = 'select any'.
>
> data:begin of itab occurs 0,
> kunnr like kna1-kunnr,
> name1 like kna1-name1,
> end of itab.
>
> data:begin of jtab occurs 0,
> kunnr like kna1-kunnr,
> land1 like kna1-land1,
> end of jtab.
>
> PARAMETERS: p_list(20) AS LISTBOX VISIBLE LENGTH 20
> default 'SELECT'.
>
> AT SELECTION-SCREEN OUTPUT.
>
> NAME = 'p_list'.
>
> VALUE-KEY = 'Name'. "---> Data for key is the same with text
> VALUE-TEXT = 'Name'. "--> Data for text is the same with key
> APPEND VALUE TO LIST.
>
> VALUE-KEY = '2'.
> VALUE-TEXT = 'Country'.
> APPEND VALUE TO LIST.
>
> CALL FUNCTION 'VRM_SET_VALUES' EXPORTING ID = NAME VALUES = LIST.
>
> start-of-selection.
> select kunnr name1 up to 20 rows from kna1 into table itab.
> select kunnr land1 up to 20 rows from kna1 into table jtab.
>
> case p_list.
> when '1'.
> loop at itab.
> write:/ itab-kunnr,itab-name1.
> endloop.
>
> when '2'.
> loop at jtab.
> write:/ jtab-kunnr,jtab-land1.
> endloop.
> endcase.
>
> <Added code tags>
>
> Moderator Message: Please use the "code" tags to format your code snippet.
>
> Edited by: Suhas Saha on Nov 17, 2011 11:19 AM
This surely seems to be a bug to me(if not by design), did you check for any SAP notes? Perhaps a front end trace can help(Note 407743) !
-Rajesh. -
I had my Imac27' for about 1 year (I bought it january 2011) , and it worked fine. But two days ago a problem started. The screen is turning black suddently, and it stay like that until I reboot it. It's not cool. The first time it happen it was hafter a very long days of video editing, I tought it was to hot. But now I just started up the Imac and 10 minutes later it happen. And now I transfer my desktop on my second screen, because the one of my Imac is constantly shutting of. What is this? Can I do something about that?
I´ve came across with the same problem and when I look out for solutions I found out that basically I had Three options
1.- Dim the brightness to the first 2 dots (that is the limit for me, anything above that shuts down again my screen)
2.- Replace an expensive part of the screen (about $900)
3.- Try with an external monitor to see if the problem was the screen or something else
What I did was to plug my flat screen to my mac with a Mini Display Port to VGA Adapter
http://store.apple.com/us/product/MB572Z/B/mini-displayport-to-vga-adapter?fnode =51
And… Problem Solved! now Im going to buy a Monitor that gonna cost me less than half of the replacement parts, my main monitor will keep siting down if i dim it above the 2 dots but at least I will have the other to work properly
So that´s that, I hope someone finds this helpful
P.S. Sorry if my english it´s not that good -
Is it possible to search for multiple folders with the same name and...
Is it possible to search for multiple folders with the same name and then select them all and change the permissions on just those folders .i.e. Search for the budget folders in all client folders and lock them down to just the project managers. Without having to go to each folder and apply the permissions.
user11919409 wrote:
Is it possible to create a Clone database with the same name of source db using RMAN ...
yes
>
DB version is 11.2.0.2
Is it possible to clone a 11.2.0.2 database to 11.2.0.3 home location directly on a new server . If it starts in a upgrade mode , it is ok ....yes
Handle: user11919409
Status Level: Newbie (10)
Registered: Dec 7, 2009
Total Posts: 102
Total Questions: 28 (22 unresolved)
why do you waste time here when you rarely get any answers to your questions? -
I am facing this problem while start debugging the Provider-Hosted app through VS2013. I want to deploy the app with same version. So please let me know any solution
to remove the app instance from office365 online, so that I can deploy the same app with same version on the specified "Developer Site".
Note: If I change the version in AppManifesst.xml file then this problem/error gets resolved. But I want to deploy with the same version as
per my business requirement.
The actual error renders while I click to "Start" button of the Visual Studio 2013 to deploy the provider-hosted app, for the sake
to deploying it on say "ABC" site collection (i.e. developer site). I work on office365 online. Therefore, request you to please provide the solution for SharePoint online office 365. The occurrences is:
"Error occurred in deployment step 'Install app for SharePoint': The provided App differs from another App with the
same version and product ID."
Please assist me anyone. It will be so kind of you.....
Naveen Kumar
Steria India Ltd.Did you updated the AppManifest.xml file
and change the version.
If this helped you resolve your issue, please mark it Answered -
How can I join 2 separate account one for my IPhone and one to my IPad to one account with the same ID and Password?
You cannot combine two different Apple ID's into one ID.
-
after I reinstall Itunes, the message read "the file iTunes Library.it cannot be read because it was created by a newer version of itunes, i have tried with iTunes version 11.1, 10.1 and 9.1 still come up with the same message and will not open iTunes
Try the following user tip:
Empty/corrupt iTunes library after upgrade/crash -
How do you create aligned interactive text boxs in a PDF with the same width and height?
how do you create aligned interactive text boxs in a PDF with the same width and height?
Without free hand creating the sizing?Assuming by "interactive text boxes" you mean form fields; in Acrobat, make a form field, then copy it and paste. (GIve the pasted copy a different name so they don't genetate the same field feedback.) Now you have two fields of the exact same size. Shift-click or marquee-drag to select both, then right-click and choose a command from the Align, Distribute or Center menu.
Maybe you are looking for
-
How to get the path when i select a directory or a file in a JTree
How to get the path when i select a directory or a file in a JTree
-
Java.sql.SQLException: Internal Error with oracle.sql.ARRAY getArray()
hi, I am having having problems with the getArray() of oracle.sql.ARRAY. Here are the details: Oracle Database - 9.2.0.6. The JDBC driver used -10.2.0.1 jar.(the latest available). I am calling a stored procedure from java, that has out param as a co
-
We use 99% black ink, new computer HP8610. Message low on yellow ink, I take time away from work to drive to another city to get the ink $28.99. Get back to the office insert the High Yield Cartridge, and now it says I need Blue ink. What the f___,
-
DataServices Global Address Cleansing code 3010 issue
Hello, During the address cleansing we're getting "3010 . Locality, region, and postcode are valid. Unable to match primary name to directory." I don't understand what this means since the address is valid. Appreciate your insight Cheers Tansu
-
i have a mac and am thinking about upgrading from snowlepard to lion , is it a good idea and hard to adapt to