IBooth camera flash not working after Mavericks v10.9.2 upgrade

I recently upgrade my laptop and I noticed that the flash in iBooth isn't working. I enabled the flash and it does flash, but the picture taken still appreas dark as if no flash was even used! Any idea how I can fix this?

I could not find any app called "iBooth."  If your problem is limited only to this one app, contact its developer or see its Support or FAQ info for help.  Perhaps all you need to do is add more light to the room or sit closer to your display when you make a picture?

Similar Messages

  • PhotoBooth flash not working after Mavericks update

    Hey,
    I have a mid-2010 13'' MBP and everything was fine up until last week when I updated to Mavericks from Lion. I try to take pictures on Photobooth (flash enabled), the screen flashes but the photo still comes out very dark and nothing happens, no matter if I'm in a dark room or not.
    I've reinstalled the OS, restarted, changed permissions and all that but nothing works.
    And this isn't the only application I've been having problems with - Dashboard sometimes doesn't open after sleep or it freezes a lot. I also think the computer is generally much slower. Really regretting this update.

    The same happened to me, I don't know what is going on but my photo booth worked good until I updated to mavericks, pictures now are very dark with or without flash.

  • Camera Flash not working after IOS7 Install

    Hello. I installed iOS7 on my iPhone 4 last night. I had a Flashlight App on the phone prior to the upgrade, which now has a built in Flashlight utility. The probelm is, I cannot get the flashlight to turn on at all now. Not through either app and not even with the camera. I tried deleting the Flashlight App then restarting the phone, no change. Has anyone else ran ito this problem yet? Are there any suggestions for a fix? I already made a Genius Bar appointment for Sunday, just in case I cannot get this fixed.
    Thanks

    I have a resolution update for this: Delete any third party flashlight apps on your phone. Perform a backup on your phone. Restore the phone to factory settings then restore the phone from your backup. After doing that, the flashlight utility on the menu and the photo flash on my phone started working again.
    I was pretty sure this was a software issue but I took the phone into an Apple store over the weekend. They did the factory reset at the store then checked the phone for hardware issues, none were found. They ordered a replacment phone for me which I will call to cancel today. When I got home and restored the phone from my backup, I discovered the LED was working again.
    Hope this helps.

  • HT6150 Wifi not working after Maverick 10.9.2 upgrade

    Hi does anyone have any issue with Wifi after upgrading to OS Maverick 10.9.2? I upgraded and my wifi just stopped working. How do we fix this?

    Troubleshooting Wi-Fi issues in OS X
    Wireless Connection Problems - Fix
    Wireless Connection Problems - Fix (2)
    Wireless Connection Problems - Fix (3)
    Wireless Connection Problems - Fix (4)
    Wireless Diagnostics - About

  • My printers are not working after mavericks install. What can I do to fix - PLEASE HELP! It is my lifeline - we are a print shop!

    My printers are not working after mavericks install.
    The printer just PAUSE and can't be resumed.
    What can I do to fix - PLEASE HELP!
    It is my lifeline - we are a print shop!

    Go to the printer manufacture website and download the drivers for your printer model for OS X v10.9 Mavericks.
    Then open System Preferences > Printers & Scanners > Print
    Select your printer on the left then click -  (minus)
    Then click + (plus) to add the printer.

  • Iphone 4 camera flash not working.

    Iphone 4 camera flash not working when taking pictures but works with the flashlight app. I have ios 7. Tried factory reset. My wife has the same problem with her iphone 4 since the first month she has had it. Any suggestions?

    and what have you done to try and fix the situation?  Have you taken the steps recommended in the User Guide?

  • My built in camera is not working after upgrading to a new Skype version

    my built in camera is not working after upgrading to a new Skype version

    See this thread:
    https://discussions.apple.com/thread/5306216?tstart=0
    FIX: 
    1. You need Time Machine
    2. Go to folder /Library/CoreMediaIO/Plug-Ins/DAL/
    3. Copy AppleCamera.plugin to good place (usb memory stick is the best place).
    4. Go to Time machine in date that skype work fine.
    5. Change AppleCamera.plugin with file from Time Machine
    6. Restart system, Now skype need to work with camera.
    If that doesnt pass,
    Suggest looking here, much success has been found:
    http://community.skype.com/t5/Mac/OS-X-10-8-5-broke-Video-on-MacBook-Air/td-p/18 91729/page/4

  • Why is Time machine backup not working after Mavericks upgrade?

    Why is Time machine backup not working after Mavericks upgrade?

    I had the same problem due to the Fire Wire port.  Apple tested it told me it is OK!, I tried a new cable, and have tested both ports on my back up device.  I find it strange that as soon as I installed Mavericks.  The drive does work using USB.  It could be a coincidence, I don't absolutely know at this point, my back up drive ports could stop working, but I doubt it!

  • My camera does not work after I restored the system, how can I use it again?

    My camera does not work after I restored the system, how can I use it again?
    Thank you for your help!

    Did try to restore "as new device" without using the backup after that?
    Did you try to reset the phone by holding the sleep and home button until the Apple logo coes back again?

  • Re: Safari 7.0 zoom not working after Mavericks upgrade.

    Re: Safari 7.0 zoom not working after Mavericks upgrade.

    Hey there sarunelis,
    It sounds like after updating to 10.9 the zoom function is not functioning at all. It sounds like you may need to check for 3rd party plugins. This article will help you check for that.
    Safari: Unsupported third-party add-ons may cause Safari to unexpectedly quit or have performance issues
    http://support.apple.com/kb/ts3230
    Thank you for using Apple Support Communities.
    Regards,
    Sterling

  • Camera is not working after Lumia Cyan update WP8....

    Hellooo Sir, I am Kailash Kumar from India (Uttar Pradesh). I have Nokia Lumia 620, I got this from my friend May 2014 and he bought it from Saudi Arbia and now it is out of warrently..
    when I got this its front camera was not working But rear(back) works fine with flash, But after some days I Updated it to win8.1 with Preview of Devloper, and after updating my Camera has Stoped working when I click the Camera Button, within a second it comes to Home Screen..... So I Downgrade to Win8.0 OS via Nokia Software Updater and My Camera Start Working again....
    Someone Suggest me to wait for official realese of Lumia Cyan with W8.1 OS and I waited for it and In August last My phone shows that a Update is Available and Now Update it again Officialy to Win8.1 with Cyan Update via Wifi, and the Same problem Again Happening My Camera Stopped working again after click the Camera Button, within a second it comes to Home Screen, I tried everything, Soft reset, Hard Reset, Uninstalling Nokia Camera App & Installing Again, Reset Camera Button.... But the problem remain Same, Stil Camera is not working.........
    I go for the nearest Customer Care Service, they told me I Updated it via Wifi and they will update it with PC Charges Rupee 450/- But I didn't give my phone to Care.... After a Day I updated it Via PC from NSU 4.2.1 (I think Customer Care will do the Same) But the Problem Remaining Same Camera Stil is not working......
    PLEASE HELP ME SOMEONE WITH THIS PROBLEM.. HERE ARE SOME MORE INFO OF MY LUMIA 620:-
    1- FIRST IT IS OUT OF COUNTRY (SAUDI ARBIA) AND OUT OF WARRENTY...
    2- OS VERSION: - 8.10.12393.890
         FIRMWARE REVISION NO. : 3058.50000.1425.0002
         HARDWARE REVISION NO. : 5.0.2.0
         RADIO SOFTWARE VERSION : 2.0.242037.8
         CHIP SOC VERSION : 82207
    I WILL HIGHLY THANKFULL TO YOU.
    Moderator's note: The attachments were removed as it contain the phone's IMEI. For security purposes, avoid posting any of your presonal information on public forums like this.

    try hard reset and see if it works and let me know if it does. take phone off. press (green call) key, (*) key, (3) key and power button then wait for phone to come on then let go of keys.

  • Photo Booth flash not working in Maverick or Yosemite

    I have noticed that the photo booth flash in Maverick on my Macbook Pro and in Yosemite on my iMac is not working Screen flash is enabled on both.
    So this is happening on two different computers. Does anyone know how to fix this? All my photos are so dark on both of my computers using Maverick and Macbook Pro.
    It works fine on system 10.6.8 though.
    Has anyone else had this problem too?
    Martha

    In case anyone is interested in your screen flash not working in the Yosemite or Maverick photo booth application, I finally called Apple today and he kept insisting it was working on his - I asked him to take a pic with the screen flash enabled and then disable it and he said it came out the same. And rationalized that it was because he was in a well lit room. I kept telling him in my old photo booth from system 10.6.8 that my face was lit up and my husband had reflections from his glasses so we went from him wanting me to reinstall my software (I refused since both computers were having the same problem - one using Yosemite and the other using Maverick)  to him finally going into HIS partitioned disk that has system 10.6.8 on it to discover that the flash there reflected off HIS glasses too. Bottom line is he admitted there has to be some flaw that prevented the photo booth flash from working for Maverick and Yosemite. Whew, finally validation!
    Martha

  • Camera App not working after update to iOS 7.1.1 on iPhone4

    Hi Guys,
    I have recently downloaded iOS7.1.1 ipsw from the apple website for the correct version of my iphone4 [GSM] and updated my phone.
    The camera app is now not responsing at all and i dont even see a picture in the camera app. I tried the update again and found that the problem is still evident.
    Please let me know if we share the same problem and also any solution if you come across.
    Regards,
    Sheikh M

    Updating to iOS 7.1.2 doesnt solving problem at all, even my front camera also begin not working after I did that. Everything's OK when I using rear cam, but just freeze and blurred on screen while switched to the front cam. And have to resetting to go back to rear cam. My iPhone4's camera itself, rear and front, are in good performance before. And I've tried anything such as reset, hard reset, restoring, setting up as new device, etc, without any result since then. If some people say it was about hardware issued, I thing so weird because too many same hardware problems coincident happened at the same moment. So I just only hope the Apple will listening and solving all problems wisely. Thanks b4.

  • Ipad camera app not working after update 7.1.1 and using skype on video call

    Hello,
    i updated my mini ipad to ios 7.1.1
    then i used skype for video call...
    It worked fine for a few minutes then the front camera stopped working
    Stopping skype and starting the camera app, i saw that the front camera was no more working...black screen
    instead rear camera was working...
    Then i tried to reset the device (pressing sleep and home button) and uninstalled skype
    Now front camera works more or less, but the camera app seems always almost freezed, i cant change easily the options,
    i cant record a video, only camera for snapshots is working...
    any suggestion?
    is it possible to uninstall the camera app and try to reinstall it?
    Thanks!

    Updating to iOS 7.1.2 doesnt solving problem at all, even my front camera also begin not working after I did that. Everything's OK when I using rear cam, but just freeze and blurred on screen while switched to the front cam. And have to resetting to go back to rear cam. My iPhone4's camera itself, rear and front, are in good performance before. And I've tried anything such as reset, hard reset, restoring, setting up as new device, etc, without any result since then. If some people say it was about hardware issued, I thing so weird because too many same hardware problems coincident happened at the same moment. So I just only hope the Apple will listening and solving all problems wisely. Thanks b4.

  • My front camera will not work after I downloaded the IOS 7.0.4 .. Why is that ?

    My front camera will not work on my iPod 5 after I downloaded the IOS 7.0.4! Why is that ??

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                                
    iOS: How to back up                                                                                     
    - Restore to factory settings/new iOS device.             
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                                      

Maybe you are looking for