IBot failure: status keeps status "Running"

Dear all,
We installed OBI EE and would like to trigger an iBot. The creation of the iBot is succesful, but in the Job Manager the status of the instances keeps pending on status "Running" and no e-mail is send out. The database tabels also contain the correct jobs and instances.
I allready did an upgrade to version 10.1.3.3 because Oracle told me this was a common issue in my previous version. Still no results for now.
Did anyone faced this issue in the past and do have some usefull tips. I would appreciate it very much.
Best regards,

Welcome to the forum.
When one gets the "Media not present," or similar error messages, it is usually a problem with the blank media, or the multi-drive/burner's inability to sense the media. "SenseCode" errors can indicate the same thing.
Now, my first question, when I see such, would be, "what brand of blank media am I using?" Blank media is not all created equal. I recommend Verbatim, Taiyo-Yuden or Falcon Pro, and recommend AGAINST Memorex, recent TDK, recent Ritek, and all "store brands." Also, though not as important, as it once was, some multi-drives/burners are somewhat sensitive to the type, -R, or +R, however, all newer multi-drives should have no issues - those are more often seen with set-top DVD players. Also, make sure that your blank media is really BLANK. All too often, users have grabbed a disc, that they thought was blank, only to see that it has actually used. Also see this ARTICLE.
If that does not fix things, I would go to Control Panel>System>Hardware>Device Manager>CD/DVD drives (on a PC) and check that there are no error/warning messages next to my multi-drive/burner and that Windows is properly seeing that multi-drive/burner.
If that all checks out, then I go to the multi-drive's mfgr's. Web site and check for firmware updates for my model of multi-drive. If there is a newer firmware, I read the installation instructions, and actually print those out for reference. IMPORTANT: installation instructions are critical to follow EXACTLY, and can change with each firmware update, so read, print out, and follow exactly. Once done, test with high-quality BLANK media.
Good luck, and hope one of those helps,
Hunt

Similar Messages

What is means "Transport Type" "Number of Failures" "Last Failure Time" "Last Success Time" "Last Failure Status"

when i running repladmin /showrepl    it show status
Showrepl_COLUMNS
Destination DC Site
Destination DC
Naming Context         is
means ?
Source DC Site
Source DC
Transport Type         is
means ?
Number of Failures     is
means ?
Last Failure Time
Last Success Time
Last Failure Status    is
means ?
Please explain to me . Thnak you

Naming Context: NamingContext refers to the directory partitions that Active Directory comprises. Naming contexts include the three Read/Write naming contexts — domain, schema, and configuration — and the optional Read-only naming contexts
that are present on domain controllers that are global catalog servers. A naming context can also be an application directory partition. A naming context is specified as a distinguished name, which indicates its hierarchical relationship to the forest root
domain (for example, DC=MyDomain,DC=Microsoft,DC=Com).
Source: http://technet.microsoft.com/en-us/library/cc757782(v=ws.10).aspx
Transport Type: See Transport Type section in this Microsoft article: http://technet.microsoft.com/en-us/library/cc755994(v=ws.10).aspx
As for the Number of Failures and the Last Failure Status
they are used to identify how many failures occurred since the last successful replication and the the status of the replication (If
Last Failure Status is equal to 0 then the replication is done successfully). Details here: http://support.microsoft.com/kb/2498185/en-us
This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.
Get Active Directory User Last Logon
Create an Active Directory test domain similar to the production one
Management of test accounts in an Active Directory production domain - Part I
Management of test accounts in an Active Directory production domain - Part II
Management of test accounts in an Active Directory production domain - Part III
Reset Active Directory user password

What happens to my points when elite status runs out?

if i choose the bank option, and my elite status runs out.. do you guys just auto send a cirtificate? or let me keep the bank option?

Hello aaronsta1,
Welcome to the Best Buy forum, and thank you for posting!
If you were to not requalify for Elite status before the end of the 2014 calendar year, then your status would be downgraded to core in February 2015. Any points in your account at that time would be converted into certificates down to the $5 level with any remaining points to be forfeited. For example, if you had 300 points in your account, then a $5 certificate (250 points = $5) would be issued and 50 points would be forfeited.
How to Keep Your Account Active
I hope you have a great rest of your day, and let me know if you have any other questions.
Derek|Social Media Specialist | Best Buy® Corporate
Private Message

Messages in inbound queue in status-RUNNING and it is too slow

Hi Experts,
We have a issue there are tons of messages in inbound queue in status-RUNNING and it is too slow!, hence there are more messages getting in the queue every minute.
This is Production enviorment.
We have priority queues
QIN is waiting status.
De-register will not work due to loss of messages fear
Please advice
thanks and regards,
krushi

Hi,
If the queues are hanging due to peak load at sometimes
you can schedule following reports to restart them automatically
(dont have to lock and unlock manually)
RSQIWKEX - Inbound Queues
RSQOWKEX- Outbound Queues
Also you can save the first entry of the queue if its causing problems to process later- smq3
thanks
francis

HELP: Oracle VM Manager 3.1.1 VM Server Status Running (Error)

Hi All,
I have updated the latest patch of VM Manager 3.1.1. In my server pool, I have 3 VM servers.
All VM Server shows Status Running (Error). I don't care about the small red x icons displayed on the VM Manager but it stops all my operations:
1. Not able to Edit the virtual machine from one server.
OVMAPI_9013E Cannot perform operation on Virtual Machine: racnode1, no server available.
Wed Nov 07 14:29:32 PST 2012
2. Not able to Remove a VM Server from the Server pool
com.oracle.ovm.mgr.api.exception.RuleException: OVMRU_004004E: - Cannot delete server: vmsvr2.X.com, while it is in a server pool
Wed Nov 07 14:31:21 PST 2012
at com.oracle.odof.core.BasicWork.invokeMethod(BasicWork.java:151)
at com.oracle.odof.command.InvokeMethodCommand.process(InvokeMethodCommand.java:100)
at com.oracle.odof.core.BasicWork.processCommand(BasicWork.java:81)
at com.oracle.odof.core.TransactionManager.processCommand(TransactionManager.java:773)
at com.oracle.odof.core.WorkflowManager.processCommand(WorkflowManager.java:401)
at com.oracle.odof.core.WorkflowManager.processWork(WorkflowManager.java:459)
at com.oracle.odof.io.AbstractClient.run(AbstractClient.java:42)
at java.lang.Thread.run(Thread.java:662)
Caused by: com.oracle.ovm.mgr.api.exception.RuleException: OVMRU_004004E: - Cannot delete server: vmsvr2.X.com, while it is in a server pool
Wed Nov 07 14:31:21 PST 2012
at com.oracle.ovm.mgr.rules.modules.api.physical.ServerRules.onPersistableCleanPre(ServerRules.java:249)
at com.oracle.ovm.mgr.api.job.JobEngine.invokeMethod(JobEngine.java:662)
at com.oracle.ovm.mgr.api.job.JobEngine.invokeMethod(JobEngine.java:631)
at com.oracle.ovm.mgr.rules.RulesEngine.runRules(RulesEngine.java:190)
at com.oracle.ovm.mgr.rules.RulesEngine.preProcess(RulesEngine.java:142)
at com.oracle.ovm.mgr.model.ModelEngine.preValidate(ModelEngine.java:547)
at com.oracle.ovm.mgr.model.ModelEngine.access$200(ModelEngine.java:65)
at com.oracle.ovm.mgr.model.ModelEngine$3.notify(ModelEngine.java:352)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:325)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:289)
at com.oracle.odof.core.storage.Transaction.invokeMethod(Transaction.java:826)
at com.oracle.odof.core.Exchange.invokeMethod(Exchange.java:245)
at com.oracle.odof.core.Exchange.invokeMethod(Exchange.java:219)
at com.oracle.ovm.mgr.api.job.JobEngine.invokeMethod(JobEngine.java:744)
at com.oracle.ovm.mgr.api.manager.ModelManagerDbImpl.deleteObject(ModelManagerDbImpl.java:868)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:329)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:289)
at com.oracle.odof.core.storage.Transaction.invokeMethod(Transaction.java:826)
at com.oracle.odof.core.Exchange.invokeMethod(Exchange.java:245)
at com.oracle.ovm.mgr.api.manager.ModelManagerProxy.deleteObject(Unknown Source)
at com.oracle.ovm.mgr.api.manager.OvmManagerImpl.deleteObjectInternal(OvmManagerImpl.java:386)
at com.oracle.ovm.mgr.api.manager.OvmManagerImpl.deleteObject(OvmManagerImpl.java:409)
at com.oracle.ovm.mgr.api.manager.OvmManagerImpl.deleteObject(OvmManagerImpl.java:391)
at com.oracle.ovm.mgr.api.system.FoundryDbImpl.deleteServer(FoundryDbImpl.java:1007)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:329)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:289)
at com.oracle.odof.core.BasicWork.invokeMethod(BasicWork.java:136)
... 7 more
I can't help to complain. The VM Manager just have been so buggy. Can't anyone help!
Edited by: 969880 on Nov 7, 2012 2:33 PM
Edited by: 969880 on Nov 7, 2012 2:34 PM

I used to see this message in my Oracle VM.
Your all questions are the same root cause is cause from your VM Servers are not available. If you want edit or remove virtual machine is need your VM Servers are available. If you want to remove Server Pool is need all VM Server are removed from it first and also cannot deleted VM Servers too.
What you have to do first is make all VM Servers up and available.
Option1. You can try to restart VM Serer agent (ovs-agent) and Oracle VM Manager service (ovmm) and try to log out and log in.
Option2. Restore Oracle VM from backup with option --UUID of previous VM Manager.
Thanks and regards,
Vandy

Service 'MSExchangeADTopology' failed to reach status 'Running' while installing Hub transport role of exchnage server 2010 sp1 on Window Server 2008 r2

Hi
Getting this error while installing hub transport role of exchange server 2010 sp1 on window server 2008 R2.
Hub Transport Role
Failed
Error:
The following error was generated when "$error.Clear();
          if ($exsSid -eq $null -or $exsSid -eq "")
          $exsSid = get-ExchangeServerGroupSID -DomainController $RoleDomainController
          start-setupservice -ServiceName MSExchangeADTopology -ServiceParameters $exsSid,$RoleDomainController
        " was run: "Service 'MSExchangeADTopology' failed to reach status 'Running' on this server.".
Service 'MSExchangeADTopology' failed to reach status 'Running' on this server.
Click here for help...
http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.1.218.11&e=ms.exch.err.Ex88D115&l=0&cl=cp
Elapsed Time: 00:25:35
Sandeep Gupta

Hi,
It might be a permission issue.
1 :
Add Manage auditing and security log Properties
Administative Tools > Local Security Policy > Local Policies > User Rights
Assignment > Manage auditing and security
Add
Exchance Servers.
2. Check Exchange Trusted Subsystem
1)Open Active Directory Users and Computers
2)Under domain name (For example contoso.com),navigate to the Builtin Container,on
the right hand side select the Administrator group,goto the properties
3)Click members tab and add Exchange Trusted Subsystem
4)Click ok twice
5)Reboot the Exchange server
6)Rerun the Exchange setup
Best Regards!

Inbound queue with tons of messages in status- RUNNING

Hi Experts,
We have a issue there are tons of messages in inbound queue in status-RUNNING and it is too slow!, hence there are more messages getting in the queue every minute.
This is Production enviorment.
We have priority queues
QIN is waiting status.
De-register will not work due to loss of messages fear
Please advice

Hi Priya,
The Q status is Executing forever, then there could be a dead lock inside IE, in processing the message and the system went into infinite loop. There is no otherway other than stopping(Lock immediately) the Q, and then unlocking it.
Also try deleting the redundant Enqueue process on Abap stack (rz10), and defining two enqueue processes enserver.exe on java stack one for ASCS, and one for SCS. You can find more information in installation guide for your XI type.
regards
Aashish Sinha
PS : reward points if helpful

SMQ2 - Status: RUNNING forever?

Team,
We are presently processing a lot of messages all asyn.
In SMQ2, we can see all (XBTI) inbound queue messages and (XBTO) outbound queues messages.
At some point we get CCMS errors on queues saying that the queue are blocked with the status RUNNING. According to the documentation, a RUNNING status mean that The first LUW of this queue is currently being processed. but the queue can stay with this status for ever .. unless we save the LUW (to SMQ3), and/or - unregistrer/registrer queue - then the queue unblock it self and at the end of the run, we restore the LUW back and it pass
Is there anyone who can explain the behavior ?
Something we get the status READY, again according to the documentation, this status (is temporary) mean that there is a lock happening behind the scene. We can unlock the queue and again, the queue get process.
What is the difference between un registering /registering queues and unlock/locking them ?
Thank a bunch in advance

Hi,
I had faced this problem badly and researched what all I could.
The Q status is Executing for ever, then there could be a dead lock inside IE, in processing the message and the system went into infinite loop. There is no otherway other than stopping(Lock immediately) the Q, and then unlocking it.
If any Q is under sysfail condition, there must be something wrong with the message and please check ST22 for any short dumps to analysis.
When you just delete a single LUW, you need not have to register the Q. But when you delete a Q itself, it is required to re-registered in SMQR. Unless, those Qs will not be created at run time by the system.
Be carreful that, you should not delete the Q unless u do not want the other waiting messages in side the Q should not be processed.
VJ

Waiting for the service MSExchangeMailboxAssistants to reach status Running

I have to say that the installation of Exchange Server 2013 SP1 has been an emotional experience so far. I have encountered and fixed approximately 20 errors so far and can still not complete the installation. Errors have ranged from adding a registry
key for "Pickup" to toggling IPv6 settings etc. The errors haven't been too bad up to now as they're clearly stated in both the setup log and event viewer. A quick Google search usually gives a few solutions to try and eventually fix
the problem.
My recent error has been difficult to find a solution to as the setup log simply says it cannot start the "MSExchangeMailboxAssistants" service. I have tried to start the service manually but the event log doesn't show any messages relating
to the stopping of the service.
Error:
Service 'MSExchangeMailboxAssistants' failed to reach status 'Running' on this server.
Platform:
Windows Server 2012 R2
Exchange Server 2013 SP1
Things I've tried:
Starting all Exchange services. All are working fine.
Started MSExchangeMailboxAssistants. Stopped immediately without an errors in event log.
Started MSExchangeMailboxAssistants.exe from command prompt. Wouldn't start as it's a service.
Used cmdlet to increase logging level to "high" and "expert" for all 'MSExchangeMailboxAssistants' services. Started service again and nothing logged.
Installed Operations Manager. Nothing logged.
Manually removed Exchange from server several times and reinstalled. Cleaned out AD, registry, files, IIS etc. No change, same error.
Try installing with and without Malware Protection.
Checked IPv6 is enabled on all NICs.
Checked registry settings for quotes around file name. It does contain the quotes so nothing to fix.
Checked Exchange 2013 SP1 is compatible with Windows Server 2012 R2. The original version wasn't but SP1 is.
I'm all out of ideas now and no error message in the logs to google.
Any help would be appreciated.

Thank you for your reply Exchange Shelly, I really appreciate your help.
Unfortunately, "MSExchangeTransport" failing to start was one of the many issues that I encountered during the installation of Exchange 2013 SP1 on Windows 2012 R2. I had already visited the website mentioned above (which was very helpful) and
the registry key is already in place.
I did double check the registry after reading your reply just in case and can confirm it's definitely there.
If I could get an error message when the MSExchangeMailboxAssistants service fails to start, I would have a fighting chance. I've tried increasing the logging level using the cmdlet and the registry but still not seeing anything in the Event Log.

Job Schedular status running after killing process flow from OWF monitor

Hi,
PROBLEM SCENARIO:
Scheuled job called 'TEST' kicks off process flow called 'Child_load' under 'Parent_load_all' and gets stuck. I go into OWF (ORACLE WORK FLOW MONIOTOR) and kill both the process flows and then complete the Process flow run manually from OWB. Now, next day the scheduled job 'TEST' should execute 'Parent load all', but it doesn't do that instead it shows 'TEST' in 'Running' STATUS from yesterday when I see it in toad under Sched.Jobs. I have to drop the scheduled job and redeploy it from OWB in order for it to work.
Any idea why its doing that?
Thanks in advance.

hello
the status of the scheduled job should be 'running'
here is what i received from oracle support on that matter:
A scheduled job is always in BUSY status, till the moment it is stopped in the Control Center Manager.
If you open the Control Center Manager, goto the Location and expand the plus "+" in front of Scheduled Jobs. There should be your job DLOAD_JOB.
On the right bottom appears the dialog Control Center Jobs. And there is a tab "Scheduled". Click on that tab and you should see a green arrow in front of the job DLOAD_JOB. This means the job is running. (In fact it is not running but waiting to be executed again according scheduled time)
To stop the job to run according schedule, you can right-click on the job and choose "Stop". The green arrow will disappear and the status in the Repository Browser will be "Completed"
To start the job again, you can right-click on the job and choose "Start". The green arrow will appear again and the status in the Repository Browser will be "Busy"
so according to this the scheduler job should be in status running;
why it does not trigger your processes however is another thing;
rgds

Getting agent status running and ready..

Hi
All,
I have OMS 10.2.0.2 on win 2003 and agent 10.1.0.4 on AIX 5.2
Getting status running and ready when I do
emctl status agent..
$ emctl status agent
Oracle Enterprise Manager 10g Database Control Release 10.2.0.2.0
Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
Agent Version : 10.1.0.4.1
OMS Version : Unknown
Protocol Version : 10.1.0.2.0
Agent Home : /u07/app/oracle/product/10.2.0/moe.wsi.com_OWSIDEV
Agent binaries : /u07/app/oracle/product/10.2.0
Agent Process ID : 405756
Parent Process ID : 356580
Agent URL : http://moe.wsi.com:3938/emd/main
Started at : 2007-10-15 13:55:19
Started by user : oracle
Last Reload : 2007-10-15 13:55:19
Last successful upload : (none)
Last attempted upload : (none)
Total Megabytes of XML files uploaded so far : 0.00
Number of XML files pending upload : 4318
Size of XML files pending upload(MB) : 40.87
Available disk space on upload filesystem : 35.98%
Agent is Running and Ready
But it doesn't show me anything in upload and OMS version..
Here is emagent.trc file ouput
2007-10-16 08:11:37 Thread-1869 ERROR pingManager: nmepm_pingReposURL: Cannot connect to https://wsi8328-1.com:1159/em/upload: re
tStatus=-32
2007-10-16 08:11:37 Thread-1869 ERROR http: snmehl_connect: Failed to get address for wsi8328-1.com: Authoritive Answer Host not
found (error = 1)
and target.xml looks fine it contains all entry for databases.
I don't know why it's not making communication with OMS.
any help will be appreciated.
Regards,
Vishal

What happens, when you issue 'emctl upload' explicitly?
You defined a secure connection (because of HTTPS in the URL) to the OMS host,did you secure the agent? (emctl secure agent). There's another posting about upload problems:
Problem with agent10g upload
Werner

10 Grid Control oem - job hung status running

I installed 10g oem recently.
Created an host job using the same target as oem is installed (simple os command echo test) and the job initiated and is hung in status running with no update.
Any logs I can check to see why it not running?

sometime a job may be show running in GC, there is an example in following thread , have a look this might help you
Re: Can't delete/stop problem execution??

On linux i cannot open firefox 33 due to exiting with failure status due to previous errors, file exists.

I am a newbie to computers and tried to update my firefox & downloaded it off of mozilla and tried to follow the commands as it was suggested for linux (ubuntu 10.04) to install it. Now when i click on the firefox 33 icon it shows that on command line ouput, tar: file exists, tar: exiting with failure status due to previous errors shows up. What do I need to do to update my current firefox? Please HELP!

Hi jadej740,
There are better forums for this knowledge, as Mozilla does not compile linux packages per build. [http://askubuntu.com/ Ask Ubuntu.com]
They may be able to give you a better answer. [[Install Firefox on Linux]]

Help me! OSX Daemon Check - com.adobe.ARM.SMJobBlessHelper -- 91 consecutive failures, Status: STOPPED

OSX Daemon Check - com.adobe.ARM.SMJobBlessHelper -- 91 consecutive failures, Status: STOPPED
What does this error mean and how can I solve them?

com.adobe.ARM* is a Adobe Updater of Acrobat Reader.
Following site could help your problem.
http://lifecs.likai.org/2011/02/real-way-to-disable-adobe-updater-from.html

Build status: Run Application Only

Hello Everyone,
I have just made a massive boo boo. I have just put and application of mine in Build status: Run Application Only. But i need to edit the application but i dont know how to put the application back into Run and Build Application :( :(
please can some one help me please
Thanks in advance,
-N.S.N.O.

Panic over :)
I found on the internet that i could change them back by following this:
Home>Administration>Manage Services>Manage Application Build Status
-N.S.N.O.

IBot failure: status keeps status "Running"

Similar Messages

Maybe you are looking for