IBot - Sending Email

Hi All,
I have an issue with the iBot email scheduling. I have the list of recepients in one report (only one column in this report which has email ids) used conditional request to schedule a report with pdf attachment (Report2). In the recepients tab i have selected the email id column and ME checkbox. Once scheduled the iBot, i am getting the email with attachment. But the specified list of recepients are not getting emails.
Also i have tried with the specific user (selected from List of Receipients option), still the persons could not get any emails. Please provide a solution for this issue.

The ibot will give an authentication error if you try and run it as a user who can not be authenticated. I've used SA System subject area and scripted users into the repos using nqudmlexec to generate 300 ibot users which represented people who had not logged in to OBIEE before, this worked quite well.

Similar Messages

BI Ibots sender email address

hi,
does anyone know how to set up BI to send out different ibots with different sender email address? currently it is global. From the EM Core application --> Deployment --> Mail then on the top you set the 'mail address of the sender'. That turns out to be the global sender email address for all the ibots. however, i have a requirement where i need to send ibot reports to show the sender as a different address for different ibots along with the recipient.
Thanks in advance for any inputs.
Shamol

Thanks SriniVEERAVALLI,
I tried to create a profile in the WLS and granted admin right; after that i tried to run an ibot 'Run as' that profile, however, after trying that it still shows up with the global sender email address as a sender.
Did you mean something different?
Thanks again,

Sending email Agent/iBot OBIEE 11 G

Hello,
I've a problem. I create an Agent, configure in Analytics and in em, but the agent didn't send the email. The error is:
AgentID: /shared/POC/Agente
[nQSError: 75005] Failed to send AUTH command. 5.7.8 Error: authentication failed: UGFzc3dvcmQ6 AgentID: /shared/POC/Agente
...Trying SMTP Delivery loop again... Sleeping for 6 seconds. AgentID: /shared/POC/Agente
[nQSError: 75005] Failed to send AUTH command. 5.7.8 Error: authentication failed: UGFzc3dvcmQ6 AgentID: /shared/POC/Agente
...Trying SMTP Delivery loop again... Sleeping for 8 seconds. AgentID: /shared/POC/Agente
[nQSError: 75005] Failed to send AUTH command. 5.7.8 Error: authentication failed: UGFzc3dvcmQ6 AgentID: /shared/POC/Agente
...Trying SMTP Delivery loop again... Sleeping for 8 seconds. AgentID: /shared/POC/Agente
[nQSError: 75005] Failed to send AUTH command. 5.7.8 Error: authentication failed: UGFzc3dvcmQ6 AgentID: /shared/POC/Agente
Exceeded number of SMTP delivery retries.
Can anyone give a hand in this?
Ty
Edited by: lucas rehem on 13/10/2010 10:44

The answer is simple. I just didn't pay attetion ... The problem is the Authentication. I had configured all correctly but, my email server just was wrong. I just enter in http:/yourip:7001/em , enter in core application, implementation and email, and correct my configuration. After this I restarted the BI Service and the Agent/iBot send with sucess the email and the Graph.

IBots sending duplicate emails

Has anyone had an issue in which an iBot sends the recepient duplicate emails?

Hi,
Even I saw the same issue.When the report is send as attachment as PDF then I get same mail twice but if the report is send in the attachment as HTML then the mail is sent only once.
Thanks,
Amrit

BI EE Delivery iBot "Send content as HTML"

When I try to send ibot by email with “Send content as HTML” – ibot is delivered but with tail like that:
/* Common elements across answers-like products (IOW, outside of dashboards) */
/* Answers and Main Bar */
.AnswersBarOuterTable
          background-color: #9ABFDC;
          border-bottom: solid 1px #6B98BF;
          padding: 4px 2px 2px 2px;
end so on...
Is it possible get ride of that tail?

by other words:
when I send in HTML format
BI is attaching file common.css
wich is not recognized by Lotus Notes
and it show contain of common.css file in plain text.
when I edit file common.css
*(delete all lines) it show:*
/* This file is intentionally empty. Styles can be defined in a customized */
/* version of this file placed in the SiebelAnalyticsData/Web/Res folder; */
/* and can then be referenced from the "Custom CSS Style Options" area */
/* within some Siebel Answers Formatting Dialogs. These styles will only */
/* affect HTML content. */
/* HTML Elements */
and so on...
is it possible to send HTML without any.css file?
Edited by: user6877826 on Nov 2, 2009 11:37 AM

Cannot send email from yahoo account on iPhone 5

I just got an iPhone5 and I couldn't set up my Yahoo email as "yahoo"--it would not allow me to complete the process despot multiple attempts. I had to set it up as an "other" account. I can receive and read emails on my phone, but when I reply those messages will not send. They go to the outbox and an error message pops up that says" the email account has been rejected by the server" Does anyone have advice on either issue: setting up yahoo properly and/or sending email from phone?

outgoing mail server
SMTP - Yahoo! SMTP Server
primary server
Yahoo! SMTP server - ON
server port 465
That's what I have for my yahoo account.

Cannot send email from non .mac server

I am only able to send/reply emails using my .mac address. My 2 other server addresses keep giving me the following message.
"Cannot send mail. One of the recipient addresses was invalid".
How can I fix this?

You should be able to send email from Safari, however I do wonder why you wish to do this and whether there is something inherently wrong with using your mail app and your iCloud address.

Cannot send email from MobileMe account

Apple recently pushed out an update to the MobileMe calendar. Since upgrading my account, I am unable to send emails from Firefox4 (current version) in Windows. The page sits indefinitely at a loading screen. Apple Support won't help because it isn't an issue with Safari. Anyone else have this issue?

When using the MobileMe account preset to create the account, the SMTP server is created with 587 as the SMTP server port, which can't be changed when using the MM account preset to create the account.

Cannot send email from Verizon to a specific domain using the web UI

I'm trying to send an email to a specific address on a domain I own from a Verizon account using the web UI. Whenever I click send, a popup appears saying "Your e-mail contains the following invalid e-mail addresses:" followed by the email address. I can send email to this address from a GMail account as well as my work email.
In Chrome, I can see that a "code":1002 error is being produced.
Does anyone know why this would happen? Does Verizon check destination domains for reputation? Is there any way to debug this further?

rhodeislandred wrote:
I'm trying to send an email to a specific address on a domain I own from a Verizon account using the web UI. Whenever I click send, a popup appears saying "Your e-mail contains the following invalid e-mail addresses:" followed by the email address. I can send email to this address from a GMail account as well as my work email.
In Chrome, I can see that a "code":1002 error is being produced.
Does anyone know why this would happen? Does Verizon check destination domains for reputation? Is there any way to debug this further?
What is the domain that is giving you the error?

Cannot send email from Powershell on Mailbox Role

Hi,
I am trying to send an email from Powershell on Mailbox role of Exchange server. I have installed Symantec Mail Security on Mailbox Role.
When I try to send email using Powershell, I got the following error.
PS C:\a> Send-MailMessage -to [email protected] -Subject "Alert Closed.. Service is restarted on Computer" -from
[email protected] -Body "The service was found stopped on Computer it was started automatically and it is now running normally." -bodyasHTML -priority High -SmtpServer smtp.domain.com
Send-MailMessage : Service not available, closing transmission channel. The server response was: 4.3.2 Service not active
At line:1 char:1
+ Send-MailMessage -to [email protected] -Subject "Alert Closed.. Service is ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidOperation: (System.Net.Mail.SmtpClient:SmtpClient) [Send-MailMessage], SmtpException
+ FullyQualifiedErrorId : SmtpException,Microsoft.PowerShell.Commands.SendMailMessage
This command is working fine on every server except exchange server (CAS, Mailbox). Firewall is off on the servers.
Any help will be highly appreciated.
Regards,
Anees

Hi,
Please check the similar thread .
http://social.technet.microsoft.com/Forums/exchange/en-US/ef699832-8da9-4709-9a50-c6223b13bd95/sendmailmessage-returns-the-server-response-was-432-service-not-available?forum=exchangesvrsecuremessaginglegacy
smtp server (smtp.domain.com) is rejecting the connection from the
Mailbox role of Exchange server.
So please allow the mailbox server ip address on the smtp server's (i.e. smtp.domain.com)
receive connector to get it done
Regards
S.Nithyanandham
Thanks S.Nithyanandham

Cannot send email from an iPhone to a Outlook group.

Hi,
My question is simple and I'd like an exactly same answer : Can iPhone users send emails from their iPhone's to one or more groups created in Outlook?
This is my situation: our organization is using iPhone to provide email, calendar, contact, task etc. to some of their employees. We are using Airwatch MDM Agent on user's iPhone because we have an Airwatch server in place. I have an user and she has an iPhone 5 and she has created some groups in Outlook but these groups are not reflected in her Contacts in the iPhone. I have update her phone with the latest update, although I was almost sure that this was not the issue, then I've found some interesting posts on internet saying that this was a known problem for the users with the previous iOS but I thought this might has been corrected with the iOS, apparently not.
Also I've tried ''the trick'' that is posted on several forums with the iCloud but neither so it's working. I am looking for a straight answer, if this works or not on iPhone's?
Thanks,
Sebastian.

There indeed ARE apps in the app store that will do what you want. Just search and find the one that best fits your needs.

Cannot send email from the Mail App?

I've had an izymail subscription for 1 year and just renewed it last week. I could never send an email from my Mail App without a window popping up stating "izymail cannot connect to the server" and the sending bar (along the bottom of the screen) just freezes and will not send.
I've a Hotmail account linked up to izymail. Anyone know how to fix this problem?

I fixed my problem - I deleted my email account on my iPhone, then tried to setup a new account. I had a few problems setting it up. It wouldn't recognize the incoming or outgoing servers and I lost my email altogether for a few hours. Then I changed every setting possible and finally figured out that I had 2-3 "Other SMTP Servers" as well as my "Primary Server". Once I deleted the Other SMTP Servers, my email worked and i'm able to send emails now!
I also think changing the "Server Port" number helped solve my problem also, and making sure "Use SSL" was turned off.

Cannot send email from sbcglobal account

Does anyone from Apple take what's discussed here back to a department that is useful in getting bugs fixed? I hope so. I am making this post although I know that NONE of you have an answer to my question that is satisfactory. I will come back to this thread as often as possible in hopes that the next update my finally fix my issue. For the love of all things, I just want to send email via IMAP like this article says I should:
http://docs.info.apple.com/article.html?artnum=306074
To be clear for you all, I've set up my sbcglobal account as detailed above...ie, using yahoo. This worked great for me until I applied the 1.0.1 update. Since then, I cannot send an email to save my life. Though receiving has worked just great.
I am well aware that I can set up my sbcglobal account using pop3/smtp. This is an annoying work around to me, not a solution. If I set it up using pop3, I loose all kinds of ability I had with IMAP. This is a documented feature that is supposed to work on the iPhone, and it doesn't. I see no reason I should have to go back to an older technology/protocol.
I've submitted multiple comments on the iphone about this. I just pray that someone at Apple fixes this soon. I'm so frustrated, and of course way past my point of returning the dang phone.

Here's the response I received from Yahoo following the link you posted. As usual, nothing that moves the problem closer to a solution. First, there is an attempt at deflecting the problem by pointing out all the other great services Yahoo offers. Note the operative word "some". That's the whole reason I am writing the note. I already know that "some" of the services are working. I'm wondering about the one that doesn't so this doesn't help. Next comes pass the buck. Go talk to Apple about it. No comment on that one, it speaks for itself. And finally, if none of that works please give me more information. I'll call that reflection. So now its back to me. I think I'll take the ball and go home. For what its worth the response is below:
I understand that you are having issues with the Yahoo! Mobile service.
I understand that your sbcglobal.net accounts are not working with the
IMAP push email option on your mobile device.
Allow us to inform you that you are able to access some of Yahoo!s most
popular services on this device - Yahoo! Mail, Yahoo! Address Book,
Yahoo! Weather, Yahoo! Finance and Yahoo! oneSearch. If you are looking
for assistance regarding your Yahoo! customizations featured in the
Apple iPhone widgets, please contact Apple Care at:
- URL: www.apple.com/support/iphone or
- Phone: 1-800-MY-IPHONE or
- go to www.apple.com/iphone for more information.
However, if you are still encountering an issue with our service. In
order for us to better understand this issue we will need some
additional information:
- The text of any error messages received
- Exact steps taken that lead up to this event
If you can describe it in more detail or other pertinent information,
we'll be happy to help in whatever way we can.
Thank you again for contacting Yahoo! Mobile Tech Support.
Regards,
Timothy
Yahoo! Mobile Tech Team

Cannot send email from iPhone5--calendar syncing issues also

I have an iPhone 5 and am not currently using iCloud. I have 3 email accounts.
The first is a yahoo email account--and it both receives & sends emails just fine.
I use Outlook for the other two email accounts (one is an IMAP and the other is a POP). Both receive email, but I cannot send out emails from my iPhone. When I try to send an email from either account, I get this message:
"A copy has been placed in your Outbox. The sender address "[address I used]" was rejected by the server.
Also, I don't know if it is related, but my iPhone calendar isn't syncing with Outlook. I add an appointment on my iPhone or in Outlook, and it won't appear in the other location (Outlook/iPhone).
Thanks for your help.

Check your settings, maybe the mail index is at fault.
Setup Wizard and troubleshooting tips:
http://www.apple.com/support/mail
Also has a link to Mail community section.

Cannot send email from scanned pages

I am having trouble with the updated HP remote app on Ipad, since the update I can scan the pages in, but then cannot send them via email. This is qute important because i work remotley from the office and rely on getting my design drawings in on a nightly basis
please help

cannot send email from scanned pages

IBot - Sending Email

Similar Messages

Maybe you are looking for