IC 10g on Linux character problems

I have an Instant Client 10g (10.1.0.3) installed on a Linux machine from which I connect to a 9i server, not maintained by me. The problem is, that selecting string data returns the national characters like Å¡Å¾Ä transalted into szc. The database is configured correctly in relevance to language and codepage and works fine if the client is installed on Windows. Also another thing that doesen't work on the Linux implementation is setting NLS_DATE_FORMAT for a session it completely ignores the parameter even if it's set like an environment variable. I use PHP4 to connect to the database using instant client.

Yes, I can not set the database default, but it's already set correctly, I tried setting it manually through a environment variable, but it had no effect.

Similar Messages

RAC 10g on Linux VMs problems with smp

I'm following Vincent Chan's article "Install Oracle RAC 10g on Oracle Enterprise Linux Using VMware Server" in order to get up to speed on Oracle RAC on Linux. I've had good success so far but it appears that when the kernel was created it was created as smp even though I only had processor count set to 1. I went on to choose the oracleasm-2.6.9-42.0.0.1EL driver for UP kernel not realizing I had an smp kernel. Now that I'm trying to create ASM disks I get the following message:
Writing Oracle ASM library driver configuration: [ OK ]
Loading module "oracleasm": Unable to load module "oracleasm"
[FAILED]
I'm assuming this problem is due to the wrong asm driver being installed.
So my question is, since I truly have a single processor virtual machine, should I try to rebuild the kernel as UP? Or should I try to re-install the smp version of oracleasm and keep the kernal as smp with 1 processor?
Additional info:
# rpm -qa | grep asm
ibmasm-3.0-7
oracleasm-support-2.0.3-2
oracleasmlib-2.0.2-1
oracleasm-2.6.9-42.0.0.0.1.EL-2.0.3-2
# uname -r
2.6.9-42.0.0.0.1.ELsmp

Hi Frits,
I had the same problem but could not find the right rpm.
Can you give the URL?
My problem:
[root@rac2 ~]# /etc/init.d/oracleasm configure
Configuring the Oracle ASM library driver.
This will configure the on-boot properties of the Oracle ASM library
driver. The following questions will determine whether the driver is
loaded on boot and what permissions it will have. The current values
will be shown in brackets ('[]'). Hitting <ENTER> without typing an
answer will keep that current value. Ctrl-C will abort.
Default user to own the driver interface []: oracle
Default group to own the driver interface []: dba
Start Oracle ASM library driver on boot (y/n) [n]: y
Fix permissions of Oracle ASM disks on boot (y/n) [y]: y
Writing Oracle ASM library driver configuration: [ OK ]
Loading module "oracleasm": Unable to load module "oracleasm"
[FAILED]
[root@rac2 cmshare]# uname -r
2.6.9-42.0.0.0.1.ELsmp
[root@rac2 cmshare]# rpm -qa | grep oracleasm
oracleasmlib-2.0.2-1
oracleasm-support-2.0.3-2
oracleasm-2.6.9-42.0.0.0.1.EL-2.0.3-2
Regards,
Chungmen

Problem to install oracle 10g on linux

Hi,
I want to install Oracle 10g on Linux
(I have Linux X76CLLCFAUU 2.6.18-194.17.1.el5 #1 SMP Mon Sep 20 07:12:06 EDT 2010 x86_64 x86_64 x86_64 GNU/Linux)
, when i run ./runInstaller, i have the following error , do you known what is the problem :
DÃ©marrage d'Oracle Universal Installer...
VÃ©rification des exigences du programme d'installation...
VÃ©rification de la version du systÃ¨me d'exploitation : il doit s'agir deredhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Echec <<<<
Fermeture d'Oracle Universal Installer ; le journal de cette session figure Ã l'emplacement /tmp/OraInstall2010-11-17_05-03-15PM/installActions2010-11-17_05-03-15PM.log

Hello,
VÃ©rification de la version du systÃ¨me d'exploitation : il doit s'agir deredhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Echec <<<<So, when the Installer checked the OS Release, it didn't find the correct one.
The message said that you should have one of this OS:
Redhat-3, SuSE-9, Redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2As previously posted, you should check from the Installation Guide that you have the right OS requirements before running the Installer.
Hope this help.
Best regards,
Jean-Valentin

Loading data by sql loader in oracle 10g on linux

I am trying to load data in Oracle 10g on linux by using sql loader, but getting error
Problem in log showing that field length of SURNAME field is more than table field size.
Following is the error in log file of sql loader
Record 21: Rejected - Error on table TABLE1, column
SURNAME.
ORA-12899: value too large for column SURNAME (actual: 65, maximum: 64)
and it is evident from following controlfile that i am using trim to discard any space then why it is giving an error.
LOAD DATA
TRUNCATE
INTO TABLE TABLE1
FIELDS TERMINATED BY ',' OPTIONALLY ENCLOSED BY '"'
ID INTEGER EXTERNAL,
OPTION1 CHAR,
REF1 CHAR,
OTHER_REF CHAR,
TITLE "TRIM(:TITLE)",
FORENAME "TRIM(:FORENAME)",
SURNAME "TRIM(:SURNAME)",
JOINT_TITLE "TRIM(:JOINT_TITLE)",
JOINT_FORENAME "TRIM(:JOINT_FORENAME)",
JOINT_SURNAME "TRIM(:JOINT_SURNAME)",
I checked the bad file and count number of characters, they are 64 characters.
When i am inserting individual record from bad file by sql loader, it is loading

Probably your database character set is multi-byte. That is %UTF8 or AL16UTF16%
Post your NLS Database Parameters value
select * from nls_database_parameters;
In General varchar2(65) by default means 65 BYTES unless
you have changed your Defalut NLS_LENGTH_SEMANTICS parameter from BYTE to CHAR.
With best regards
Shan

Oui-10207error while installing oracle 10g on linux in vmware

Hi,
I have installed vmware on windows 7(64 bit) on which i have installed Oracle Enterprise linux 5. I have set all the variables correctly. but when i try to install oracle 10g on linux, i get the error
OUI-10207:there is not enough disk space in the OUI swap area /tmp/OraInstall2011-10-17_03-44-48PM.Please make atleast 529KB of space avaivale and retry.
but i have around 95bg of space. My partitions are as follows
Device Boot Start End Blocks Id System
/dev/sda1 * 1 12551 100815876 83 linux
/dev/sda2 12552 13041 3935925 82 Linux swap/solaris
/dev/sda3 13042 13054 104422+ 83 linux
Please help me in solving the problem.
Thanks
Viraj

What is your swap size? try to increase size
execute below command on terminal, paste result here.
#swapon -s
#free
Tips : how to increase swap space
http://hackertrip.wordpress.com/2011/09/11/increase-swap-space/

Installation of Developer Suite 10g in Linux

Hi,
I've done the configuration of Developer Suite 10g on Windows OS. But i want to know how can i configure the Developer Suite 10g in Linux platform.
Any link for this would help me a lot.
I have done some configuration, but i'm facing some problems with it. Like i've compiled the form in windows version, but when i try to compile the form in
linux, i'm facing the problems. In the form there are some libraries attached to it. When compiled in Windows, it got compiled successfully, but when i compile it
in Linux, it is unable to find the procedures and function in the libraries. To come out of this situation, i've placed all the libraries and the forms in a single folder. still
the problem exists. It is giving an error saying that the Invalid identifier, whereever i've mentioned the procedures/functions of libraries. Even in windows, i've all
the forms and libraries in the same folder.
Regards,
Alok Dubey

First of all which Linux....????I am successful in installing it. It is Redhat Linux 5.0 Enterprise edition. But i'm facing the problem in configuring it.
I checked out from Oracle web site, this linux version supports the Developer Suite 10g. If u can send me any document
or any link which u felt that it is very useful, then Please let me know.
Have you checked if it is registered with DevSuite10g...???How to check this ..
"I have done some configuration.."
Which....????
I've set the forms path so that i can run the forms using the url in the browser. But i feel that my configuration is incomplete. As i've mentioned already that when my form is
compiled in the windows, it is getting compiled. But when i compile in linux, it is showing the error like Invalid Identifier. Here the Identifier name it is dispalying is the name of function(Which
is in the attached library).
Regards,
Alok Dubey
Edited by: user583531 on Oct 23, 2008 4:06 PM

Imp dmp file in oracle 10g on linux

i have oracle 10g on linux now i want to imp the dmp file to db.
i put the file in /mnt/erp/file.dmp folder.
i log in as oracle user and ....
and start the imp the file as
imp user/password file=/mnt/erp/file.dmp
but it giver error faile to open the file for read.....
what is the problem.....
is there any privillage issue???????????
helped with full syntax...and steps...

i copy the dmp file in /mnt/erp folder as root user.
i am going to imp it as oracle user.
sir i don't know about dmp group.
i past the error i got..
[oracle@lnxdb erp]$ imp
Import: Release 10.2.0.1.0 - Production on Wed Oct 10 08:09:37 2012
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Username: FS_10oct2012
Password:
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 -
Production
With the Partitioning, OLAP and Data Mining options
Import file: expdat.dmp > FR_10_10_2012.dmp
IMP-00002: failed to open FR_10_10_2012.dmp for read

Trying to use 10G for linux

Two Problems
1. I downloaded 10 for linux,
used gunzip
Now I am at ship.db.cpio
I ran cpio -idmv ship.db.cpio
The command never stoped, what did I do wrong ???
Next problem
The 10G for linux state:
I need to change on my linux computer,
sysctl.conf, pam.d/login, limits.conf, profile
There all read only files,
What do I need to do ????
I am using Red hat linux EP. rev 3 newest one.

1. Use cpio -idmv <ship.db.cpio
sysctl.conf, pam.d/login, limits.conf, profileThese are system files : you have to login as root to modify them, or su - root if you are already connected as another user.

Fonts issue on 10g Reports (Linux)

A while back I posted some questions about installing fonts on Linux RHEL 5.
Currently, I'm in process of upgrading Client/Server Forms/Reports from 6i on a Windows platforms to 10g forms/reports on a Linux RHEL5 platform. No database is installed on the server since we are using the TNSNames in the Network Admin to connect to the database.
I have been able to convert all forms and all reports to 10g. I had an issue with the Arial, Arial Narrow, and Courier New fonts not displaying in output when I generated a PDF file via the screen using the WEB.SHOW_DOCUMENT command. The fonts were translating. I was able to use Metalink Note 261879.1 and run the scripts to generate the AFM files and copy the TTF fonts to the appropriate directories. When I run the reports in 10g on Linux, those 3 fonts display just fine.
However, I have 3 other fonts (Monotype Sorts, Arial Unicode MS, and one of Barcode fonts) that I need to get working. I've worked with Oracle Support and I'll be honest, the steps they are telling me either aren't very clear or just flat out aren't right.
I've tried on Windows to use the ttf2pt1 program to generate the AFM files and copied those up to guicommon/tk/admin/AFM directory. I've copied the TTF file up to the associated directory. I've modified the uifont.ali directory to include the font, to no success.
Has anyone tried to move a Windows font up to Linux (Unix) and got it to work successfully? If so, could you provide me some steps? I've really been trying to get this to work and would do anything at this point to get it to work. I've got about 5 reports that use these 3 fonts and if I get them working, I'm done.
Please provide good detail, if possible. Oracle Support has just confused me more by providing notes to read and little tidbits here and there but haven't given me something that works in a straightforward manner.
Chris

My uifont.ali:
# Corrected uifont.ali - Matt Jernigan, Brown University, 31 MAR 2010
# Corrected [ Global ] aliasing standard Windows fonts.
# Corrected [ PDF:Subset ] Arial Unicode MS and less standard fonts.
# Note: These corrections do not necessarily match Oracle docs.
# 05 APR 2010 - Decided to subset Arial, Arial Narrow, Courier New,
# and Times New Roman in addition to Arial Unicode MS due to lack of
# support of UTF-8 in Oracle's PDF engine at this time. A charset
# conversion feature for specific fonts would be nice but nothing was
# found that was working such as arial.....=helvetica.....WE8ISO8859P1
# $Header: uifont.ali@@/main/22 \
# Checked in on Tue Jan 8 15:32:42 PST 2002 by idc \
# Copyright (c) 1999, 2004, Oracle. All rights reserved.
# $
# $Revision: tk2/admin/uifont.ali#0 $
# Copyright (c) 1994, 2004, Oracle. All rights reserved.
# All Rights Reserved.
# DESCRIPTION:
# Each line is of the form:
#     <Face>.<Size>.<Style>.<Weight>.<Width>.<CharSet> = \
#                      <Face>.<Size>.<Style>.<Weight>.<Width>.<CharSet>
# The <Face> must be the name (string/identifier) of a font face. The
# <Style>, <Weight>, <Width>, and <CharSet> may either be a numeric
# value or a predefined identifier/string. For example, both US7ASCII
# and 1 are valid <CharSet> values, and refer to the same character set.
# The <Size> dimension must be an explicit size, in points.
# The following is a list of recognized names and their numeric
# equivalents:
#     Styles                Numeric value
#       Plain                      0
#       Italic                     1
#       Oblique                    2
#       Underline                  4
#       Outline                    8
#       Shadow                    16
#       Inverted                  32
#       Overstrike                64
#       Blink                    128
#     Weights               Numeric value
#       Ultralight                 1
#       Extralight                 2
#       Light                      3
#       Demilight                  4
#       Medium                     5
#       Demibold                   6
#       Bold                       7
#       Extrabold                  8
#       Ultrabold                  9
#     Widths                Numeric value
#       Ultradense                 1
#       Extradense                 2
#       Dense                      3
#       Semidense                  4
#       Normal                     5
#       Semiexpand                 6
#       Expand                     7
#       Extraexpand                8
#       Ultraexpand                9
# Styles may be combined; you can use plus ("+") to delimit parts of a
# style. For example,
#        Arial..Italic+Overstrike = Helvetica.12.Italic.Bold
# are equivalent, and either one will map any Arial that has both Italic
# and Overstrike styles to a 12-point, bold, italic Helvetica font.
# All strings are case-insensitive in mapping. Font faces are likely to
# be case-sensitive on lookup, depending on the platform and surface, so
# care should be taken with names used on the right-hand side; but they
# will be mapped case-insensitively.
# See your platform documentation for a list of all supported character
# sets, and available fonts.
# BUGS:
#    o Should accept a RHS ratio (e.g., "Helv = Arial.2/3").
#===============================================================
[ Global ] # Put mappings for all surfaces here.
# Mapping from MS Windows
#MJJ# - Unix apparently lowercases what it reads from the Report
# and this case must be corrected.
# Arial = Helvetica will not work. Likely due to Oracle not supporting
# Regular as a weight such as Arial...Regular = Helvetica...Medium
#arial               = Arial
#"arial narrow"      = "Arial Narrow"
#"courier new"       = "Courier New"
#"times new roman"   = "Times New Roman"
"ms sans serif"         = "MS Sans Serif"
"microsoft sans serif" = "Microsoft Sans Serif"
# Note: I'm not providing AFM files for the Sans Serifs. I'll let
# the engine do with them as it sees fit. Best to avoid use of them.
# Arial Narrow is not really standard enough to be included here
# so limit use to clients that are known to have it installed.
# Consider moving Arial Narrow TTF's to the server and subsetting it.
#MJJ# - Alternative mappings to the above. The PDF engine appears to
# take liberty with mapping Courier New to Courier and Times New Roman
# to Times and, if wanted, these mappings appeared to correct this
# behavior. Note: not thoroughly tested. Changing the AFM files
# from CourierNewPS to CourierNew and such may produce more compatible
# results on Mac (just a guess) -- though leaving at Courier would be
# most compatible.
#arial..Italic.Bold..                = "Arial-BoldItalicMT"..Italic.Bold..
#arial...Bold..                      = "Arial-BoldMT"...Bold..
#arial..Italic...                    = "Arial-ItalicMT"..Italic...
#arial                               = "ArialMT"
#"courier new"..Italic.Bold..        = "CourierNewPS-BoldItalicMT"..Italic.Bold..
#"courier new"...Bold..              = "CourierNewPS-BoldMT"...Bold..
#"courier new"..Italic...            = "CourierNewPS-ItalicMT"..Italic...
#"courier new"                       = "CourierNewPSMT"
#"times new roman"..Italic.Bold..    = "TimesNewRomanPS-BoldItalicMT"..Italic.Bold..
#"times new roman"...Bold..          = "TimesNewRomanPS-BoldMT"...Bold..
#"times new roman"..Italic...        = "TimesNewRomanPS-ItalicMT"..Italic...
#"times new roman"                   = "TimesNewRomanPSMT"
# Mapping from Macintosh
#"New Century Schlbk" = "new century schoolbook"
#"New York"        = times
#geneva            = helvetica
#===============================================================
[ Printer ] # Put mappings for all printers here.
#===============================================================
[ Printer:PostScript1 ] # Put mappings for PostScript level 1 printers here.
# Sample Kanji font mappings
...UltraLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...UltraLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
...ExtraLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...ExtraLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
...Light..JEUC      = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...Light..SJIS      = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
...DemiLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...DemiLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
.....JEUC           = "GothicBBB-Medium-83pv-RKSJ-H"...Medium..JEUC
.....SJIS           = "GothicBBB-Medium-83pv-RKSJ-H"...Medium..SJIS
# Mapping from MS Windows
Roman             = palatino
Script            = "itc zapf chancery"
FixedSys          = courier
System            = helvetica
# Mapping from Macintosh
"Avant Garde"     = "itc avant garde gothic"
# Mapping from Motif display
fixed             = courier
clean             = times
lucidatypewriter = courier
lucidabright      = times
#===============================================================
[ Printer:PostScript2 ] # Put mappings for PostScript level 2 printers here.
# Sample Kanji font mappings
...UltraLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...UltraLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
...ExtraLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...ExtraLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
...Light..JEUC      = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...Light..SJIS      = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
...DemiLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...DemiLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
.....JEUC           = "GothicBBB-Medium-83pv-RKSJ-H"...Medium..JEUC
.....SJIS           = "GothicBBB-Medium-83pv-RKSJ-H"...Medium..SJIS
# Mapping from MS Windows
Roman             = palatino
Script            = "itc zapf chancery"
FixedSys          = courier
System            = helvetica
# Mapping from Macintosh
"Avant Garde"     = "itc avant garde gothic"
# Mapping from Motif display
fixed             = courier
clean             = times
lucidatypewriter = courier
lucidabright      = times
#===============================================================
[ Printer:PCL5 ] # Put mappings for PCL 5 printers here.
helvetica         = univers
times             = "cg times"
clean             = "antique olv"
fixed             = courier
lucida            = univers
lucidabright      = "cg times"
lucidatypewriter = courier
"new century schoolbook" = univers
terminal          = "line printer"
#===============================================================
[ Display ] # Put mappings for all display surfaces here.
#===============================================================
[ Display:Motif ] # Put mappings for Motif displays here
# Fix for bug no 778937 DO NOT MOVE!
Roman.....sjis    = lucida.....jeuc
Script.....sjis   = lucidabright.....jeuc
FixedSys.....sjis = fixed.....jeuc
System.....sjis   = lucida.....jeuc
.....sjis         = .....jeuc
# Mapping from MS Windows
Roman             = lucida
Script            = lucidabright
FixedSys          = fixed
System            = lucida
# Mapping from Macintosh
"Avant Garde"     = helvetica
"Bookman"         = times
#===============================================================
[ Display:CM ]     # Put mappings for all CM displays here.
# These are DEC-specific, and may need localization
*..Blink          = Blinking
*..Inverted+Underline.Bold = ReverseBoldUnderline
*..Inverted+Underline.     = UnderlineReverse
*..Underline.Bold = UnderlineBold
*..Inverted.Bold = ReverseBold
*...Bold          = Bold
*..Underline      = Underline
*..Inverted       = Reverse
*                 = Plain                # The font of last resort
#===============================================================
# Oracle Report PDF sections
# Three new sections have been added:
# [ PDF ]         - Used for font aliasing and Multibyte language support
# [ PDF:Embed ]   - Used for Type 1 font embedding
# [ PDF:Subset ] - Used for True Type Font subsetting
# NOTES ON PRECEDENCE OF PDF SECTIONS:
# If you have entries for a same font in many PDF sections, then Font
# Aliasing entry will take precedence over Font Subsetting entry. Entries
# in Font Subsetting will take precedence over the entries in Font Embedding
# section.
# Generic entries for a font must follow more specific entries for the same
# font. For instance, if you want to subset helvetica Plain, helvetica Bold,
# helvetica Italic and helvetica Bold-Italic fonts, your entries must be:
# [ PDF:Subset ]
# helvetica..Italic.Bold.. = "Arialbi.ttf"
# helvetica...Bold..       = "Arialb.ttf"
# helvetica..Italic...     = "Ariali.ttf"
# helvetica.....           = "Arial.ttf"
# If helvetica..... entry appears in the top of the list, all the styles of
# helvetica font in the layout will be subset as helvetica Plain font.
[ PDF ]
# This example shows how to rename helvetica font to Courier font
# helvetica = Courier
# You can Alias specific styles of font as below
# helvetica.12..Bold.. = Courier.14....
# "Lucida Bright".12..Bold = "New Century Schoolbook"
# Support for Far Eastern Languages:
# PDF section can be additionally used to enable Multibyte language support
# built into Reports. To use this feature with Adobe (r) Acrobat (c), you
# need to install the Asian font pack available online at the Adobe web site.
# .....SJIS = "HeiseiKakuGo-W5-Acro"
# A Japanese report run with Shift-JIS character set is replaced to
# HeiseiKakuGo-W5-Acro CID font.
[ PDF:Embed ]
# This example shows how to embed Type 1 helvetica font into the PDF file:
# helvetica = "helvetica.afm helvetica.pfa"
# You need to specify the .afm file before the .pfa file.
# The font files must exist in one of the folders specified in REPORTS_PATH.
[ PDF:Subset ]
# This example shows how to subset Arial True Type font into the PDF file:
# helvetica = "Arial.ttf"
# The True Type font files must exist in any one of the folders specified in
# REPORTS_PATH.
# Subsetting TrueType Collection fonts:
# Typically, a TTC font contains several fonts in one file. For example,
# the TTC file, msgothic.ttc consists of three fonts in the order -
# MS Gothic, MS PGothic and MS UI Gothic. To subset MS PGothic, the
# entry in the PDF:Subset section of uifont.ali would be:
# "MS PGothic" = "msgothic.ttc,1"
#MJJ# - Removed old subset mappings.
"arial unicode ms".....             = "ARIALUNI.TTF"
arial..Italic.Bold..                = "arialbi.ttf"
arial...Bold..                      = "arialbd.ttf"
arial..Italic...                    = "ariali.ttf"
arial                               = "arial.ttf"
"arial narrow"..Italic.Bold..       = "arialnbi.ttf"
"arial narrow"...Bold..             = "arialnb.ttf"
"arial narrow"..Italic...           = "arialni.ttf"
"arial narrow"                      = "arialn.ttf"
"courier new"..Italic.Bold..        = "courbi.ttf"
"courier new"...Bold..              = "courbd.ttf"
"courier new"..Italic...            = "couri.ttf"
"courier new"                       = "cour.ttf"
"times new roman"..Italic.Bold..    = "timesbi.ttf"
"times new roman"...Bold..          = "timesbd.ttf"
"times new roman"..Italic...        = "timesi.ttf"
"times new roman"                   = "times.ttf"
tahoma...Bold..                     = "tahomabd.ttf"
tahoma.....                         = "tahoma.ttf"
# Tahoma is a narrower adaption of Verdana more appropriate for print.
# Tahoma also has more charsets such as Arabic, Hebrew and Thai.
# No italics. Verdana and Tahoma were designed for screen anyhow.
#MJJ# Miscellaneous Notes:
# oracle::devlpar4:/u01/app/oracle/Forms1/fonts
# ARIALUNI.TTF arialbd.ttf   courbd.ttf    tahomabd.ttf verdana.ttf
# arial.ttf     cour.ttf      tahoma.ttf    times.ttf
# PFA's might be found here: /usr/lib/X11/fonts/type1
My screenprinter.ppd:
*% Corrected screenprinter.ppd - Matt Jernigan, Brown U, 31 MAR 2010
*% Reverted baseline from hp4mp6_1.ppd back to datap462.ppd (Oracle's
*% default). Added Arial, Arial Narrow, Arial Unicode MS, Courier New,
*% Tahoma, and Times New Roman.
*% 05 APR 2010 - ArialUnicodeMS wants to be before the other Arials
*% for some unknown reason, else it is not found for subsetting.
*PPD-Adobe: "4.0"
*% Adobe Systems PostScript(R) Printer Description File
*% Copyright 1987-1992 Adobe Systems Incorporated.
*% All Rights Reserved.
*% Permission is granted for redistribution of this file as
*% long as this copyright notice is intact and the contents
*% of the file is not altered in any way from its original form.
*% End of Copyright statement
*FormatVersion: "4.0"
*FileVersion: "3.1"
*PCFileName: "DATAP462.PPD"
*LanguageVersion: English
*Product: "(Dataproducts LZR 2665)"
*PSVersion: "(46.2) 1"
*ModelName: "Dataproducts LZR-2665"
*NickName: "Dataproducts LZR-2665 v46.2"
*% ==== Options and Constraints =====
*OpenGroup: InstallableOptions/Options Installed
*OpenUI *Option1/Optional Lower Tray: Boolean
*DefaultOption1: False
*Option1 True/Installed: ""
*Option1 False/Not Installed: ""
*CloseUI: *Option1
*CloseGroup: InstallableOptions
*UIConstraints: *Option1 False *InputSlot Lower
*% General Information and Defaults ===============
*ColorDevice: False
*DefaultColorSpace: Gray
*FreeVM: "178744"
*LanguageLevel: "1"
*VariablePaperSize: False
*FileSystem: False
*Throughput: "26"
*Password: "0"
*ExitServer: "
count 0 eq { % is the password on the stack?
    true
    dup    % potential password
    statusdict /checkpassword get exec not
} ifelse
{ % if no password or not valid
    (WARNING : Cannot perform the exitserver command.) =
    (Password supplied is not valid.) =
    (Please contact the author of this software.) = flush
    quit
} if
serverdict /exitserver get exec
*End
*Reset: "
count 0 eq { % is the password on the stack?
    true
    dup    % potential password
    statusdict /checkpassword get exec not
} ifelse
{ % if no password or not valid
    (WARNING : Cannot reset printer.) =
    (Password supplied is not valid.) =
    (Please contact the author of this software.) = flush
    quit
} if
serverdict /exitserver get exec
systemdict /quit get exec
(WARNING : Printer Reset Failed.) = flush
*End
*DefaultResolution: 300dpi
*?Resolution: "
save
initgraphics
0 0 moveto currentpoint matrix defaultmatrix transform
0 72 lineto currentpoint matrix defaultmatrix transform
3 -1 roll sub dup mul
3 1 roll exch sub dup mul
add sqrt round cvi
(          ) cvs print (dpi) = flush
restore
*End
*% Halftone Information ===============
*ScreenFreq: "50.0"
*ScreenAngle: "54.0"
*DefaultScreenProc: Dot
*ScreenProc Dot: " {dup mul exch dup mul add sqrt 1 exch sub } "
*ScreenProc Line: "{ pop }"
*ScreenProc Ellipse: "
{ dup 5 mul 8 div mul exch dup mul exch add sqrt 1 exch sub }"
*End
*DefaultTransfer: Null
*Transfer Null: "{ }"
*Transfer Null.Inverse: "{ 1 exch sub }"
*% Paper Handling ===================
*% Use these entries to set paper size most of the time, unless there is
*% specific reason to use PageRegion.
*OpenUI *PageSize: PickOne
*OrderDependency: 30 AnySetup *PageSize
*DefaultPageSize: Letter
*PageSize Letter: "statusdict /lettertray get exec letterR"
*PageSize Letter.Transverse: "statusdict /lettertray get exec letter"
*PageSize Legal: "statusdict /legaltray get exec"
*PageSize Ledger: "statusdict /ledgertray get exec"
*PageSize Statement: "statusdict /statementtray get exec"
*PageSize Tabloid: "statusdict /11x17tray get exec"
*PageSize A3: "statusdict /a3tray get exec"
*PageSize A4: "statusdict /a4tray get exec a4R"
*PageSize A4.Transverse: "statusdict /a4tray get exec a4"
*PageSize A5: "statusdict /a5tray get exec"
*PageSize B4: "statusdict /b4tray get exec"
*PageSize B5: "statusdict /b5tray get exec b5R"
*PageSize B5.Transverse: "statusdict /b5tray get exec b5"
*CloseUI: *PageSize
*% These entries will set up the frame buffer. Usually used with manual feed.
*OpenUI *PageRegion: PickOne
*OrderDependency: 40 AnySetup *PageRegion
*DefaultPageRegion: Letter
*PageRegion Letter: "letterR"
*PageRegion Letter.Transverse: "letter"
*PageRegion Legal: "legal"
*PageRegion Ledger: "ledger"
*PageRegion Tabloid: "11x17"
*PageRegion A3: "a3"
*PageRegion A4: "a4R"
*PageRegion A4.Transverse: "a4"
*PageRegion A5: "a5"
*PageRegion B4: "b4"
*PageRegion B5: "b5R"
*PageRegion B5.Transverse: "b5"
*PageRegion Statement: "statement"
*CloseUI: *PageRegion
*% The following entries provide information about specific paper keywords.
*DefaultImageableArea: Letter
*ImageableArea Letter: "20 16 591 775 "
*ImageableArea Letter.Transverse: "18 19 593 773 "
*ImageableArea Legal: "18 19 593 990 "
*ImageableArea Ledger: "18 16 1205 775 "
*ImageableArea Tabloid: "16 19 775 1206 "
*ImageableArea A3: "18 21 823 1170 "
*ImageableArea A4: "18 18 576 823 "
*ImageableArea A4.Transverse: "18 19 577 823 "
*ImageableArea A5: "18 19 401 577 "
*ImageableArea B4: "19 15 709 1017 "
*ImageableArea B5: "20 19 495 709 "
*ImageableArea B5.Transverse: "20 19 495 709 "
*ImageableArea Statement: "22 19 374 594 "
*?ImageableArea: "
save
/cvp {(                ) cvs print ( ) print } bind def
/upperright {10000 mul floor 10000 div} bind def
/lowerleft {10000 mul ceiling 10000 div} bind def
newpath clippath pathbbox
4 -2 roll exch 2 {lowerleft cvp} repeat
exch 2 {upperright cvp} repeat flush
restore
*End
*% These provide the physical dimensions of the paper (by keyword)
*DefaultPaperDimension: Letter
*PaperDimension Letter: "612 792"
*PaperDimension Letter.Transverse: "612 792"
*PaperDimension Legal: "612 1008"
*PaperDimension Ledger: "1224 792"
*PaperDimension Tabloid: "792 1224"
*PaperDimension A3: "842 1191"
*PaperDimension A4: "595 842"
*PaperDimension A4.Transverse: "595 842"
*PaperDimension A5: "420 595"
*PaperDimension B4: "729 1032"
*PaperDimension B5: "516 729"
*PaperDimension B5.Transverse: "516 729"
*PaperDimension Statement: "396 612"
*RequiresPageRegion All: True
*OpenUI *InputSlot: PickOne
*OrderDependency: 20 AnySetup *InputSlot
*DefaultInputSlot: Upper
*InputSlot Upper: "0 statusdict /setpapertray get exec"
*InputSlot Lower: "1 statusdict /setpapertray get exec"
*?InputSlot: "
save
[ (Upper) (Lower) ] statusdict /papertray get exec
(get exec) stopped ( pop pop (Unknown)} if = flush
restore
*End
*CloseUI: *InputSlot
*OpenUI *ManualFeed: Boolean
*OrderDependency: 20 AnySetup *ManualFeed
*DefaultManualFeed: False
*ManualFeed True: "statusdict /manualfeed true put"
*ManualFeed False: "statusdict /manualfeed false put"
*?ManualFeed: "
save
statusdict /manualfeed get {(True)}{(False)}ifelse = flush
restore
*End
*CloseUI: *ManualFeed
*DefaultOutputOrder: Reverse
*% Font Information =====================
*%DefaultFont: Error
*DefaultFont: Courier
*Font ArialUnicodeMS: Special "(Version 1.01)" Special ROM
*Font ArialMT: Special "(Version 3.06)" Special ROM
*Font Arial-BoldMT: Special "(Version 3.06)" Special ROM
*Font Arial-BoldItalicMT: Special "(Version 3.06)" Special ROM
*Font Arial-ItalicMT: Special "(Version 3.06)" Special ROM
*Font ArialNarrow: Special "(Version 2.40)" Special ROM
*Font ArialNarrow-Bold: Special "(Version 2.40)" Special ROM
*Font ArialNarrow-BoldItalic: Special "(Version 2.40)" Special ROM
*Font ArialNarrow-Italic: Special "(Version 2.40)" Special ROM
*Font CourierNewPSMT: Special "(Version 2.90)" Special ROM
*Font CourierNewPS-BoldMT: Special "(Version 2.90)" Special ROM
*Font CourierNewPS-BoldItalicMT: Special "(Version 2.90)" Special ROM
*Font CourierNewPS-ItalicMT: Special "(Version 2.90)" Special ROM
*Font TimesNewRomanPSMT: Special "(Version 3.06)" Special ROM
*Font TimesNewRomanPS-BoldMT: Special "(Version 3.06)" Special ROM
*Font TimesNewRomanPS-BoldItalicMT: Special "(Version 3.06)" Special ROM
*Font TimesNewRomanPS-ItalicMT: Special "(Version 3.06)" Special ROM
*Font Tahoma: Special "(Version 3.15)" Special ROM
*Font Tahoma-Bold: Special "(Version 3.15)" Special ROM
*Font Courier: Standard "(001.004)" Standard ROM
*Font Courier-Bold: Standard "(001.001)" Standard ROM
*Font Courier-BoldOblique: Standard "(001.001)" Standard ROM
*Font Courier-Oblique: Standard "(001.001)" Standard ROM
*Font Helvetica: Standard "(001.001)" Standard ROM
*Font Helvetica-Bold: Standard "(001.001)" Standard ROM
*Font Helvetica-BoldOblique: Standard "(001.001)" Standard ROM
*Font Helvetica-Oblique: Standard "(001.001)" Standard ROM
*Font Symbol: Special "(001.001)" Special ROM
*Font Times-Bold: Standard "(001.001)" Standard ROM
*Font Times-BoldItalic: Standard "(001.001)" Standard ROM
*Font Times-Italic: Standard "(001.001)" Standard ROM
*Font Times-Roman: Standard "(001.001)" Standard ROM
*?FontQuery: "
save
/str 100 string dup 0 (fonts/) putinterval def
   count 1 gt
     exch dup str 6 94 getinterval cvs
     (/) print print (:) print
     FontDirectory exch known
     {(Yes)}{(No)} ifelse =
   {exit} ifelse
}bind loop
(*) = flush
restore
*End
*?FontList: "
FontDirectory { pop == } bind forall flush
(*) = flush
*End
*% Printer Messages (verbatim from printer):
*Message: "%%[ exitserver: permanent state may be changed ]%%"
*Message: "%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%"
*Message: "\FontName\ not found, using Courier"
*% Status (format: %%[ status: <one of these> ]%% )
*Status: "idle"
*Status: "busy"
*Status: "waiting"
*Status: "printing"
*Status: "warming up"
*Status: "PrinterError: BD check"
*Status: "PrinterError: Paper jam"
*Status: "PrinterError: Replace toner bag"
*Status: "PrinterError: Warming up"
*Status: "PrinterError: Timing error"
*Status: "PrinterError: Fuser check"
*Status: "PrinterError: Cover opened"
*Status: "PrinterError: Toner empty"
*Status: "PrinterError: Empty & reset output bin(s)"
*Status: "PrinterError: Sorter or jogger error"
*Status: "PrinterError: Scanner check"
*% Input Sources (format: %%[ status: <stat>; source: <one of these> ]%% )
*Source: "serial9"
*Source: "serial25"
*Source: "AppleTalk"
*Source: "Centronics"
*% Printer Error (format: %%[ PrinterError: <one of these> ]%%)
*PrinterError: "BD check"
*PrinterError: "Paper jam"
*PrinterError: "Replace toner bag"
*PrinterError: "Warming up"
*PrinterError: "Timing error"
*PrinterError: "Fuser check"
*PrinterError: "Cover opened"
*PrinterError: "Toner empty"
*PrinterError: "Empty & reset output bin(s)"
*PrinterError: "Sorter or jogger error"
*PrinterError: "Scanner check"
*%DeviceAdjustMatrix: "[1 0 0 1 0 0]"
*% Color Separation Information =====================
*DefaultColorSep: ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi
*InkName: ProcessBlack/Process Black
*InkName: CustomColor/Custom Color
*InkName: ProcessCyan/Process Cyan
*InkName: ProcessMagenta/Process Magenta
*InkName: ProcessYellow/Process Yellow
*% For 60 lpi / 300 dpi =====================================================
*ColorSepScreenAngle ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi: "45"
*ColorSepScreenAngle CustomColor.60lpi.300dpi/60 lpi / 300 dpi: "45"
*ColorSepScreenAngle ProcessCyan.60lpi.300dpi/60 lpi / 300 dpi: "15"
*ColorSepScreenAngle ProcessMagenta.60lpi.300dpi/60 lpi / 300 dpi: "75"
*ColorSepScreenAngle ProcessYellow.60lpi.300dpi/60 lpi / 300 dpi: "0"
*ColorSepScreenFreq ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi: "60"
*ColorSepScreenFreq CustomColor.60lpi.300dpi/60 lpi / 300 dpi: "60"
*ColorSepScreenFreq ProcessCyan.60lpi.300dpi/60 lpi / 300 dpi: "60"
*ColorSepScreenFreq ProcessMagenta.60lpi.300dpi/60 lpi / 300 dpi: "60"
*ColorSepScreenFreq ProcessYellow.60lpi.300dpi/60 lpi / 300 dpi: "60"
*% For 53 lpi / 300 dpi =====================================================
*ColorSepScreenAngle ProcessBlack.53lpi.300dpi/53 lpi / 300 dpi: "45.0"
*ColorSepScreenAngle CustomColor.53lpi.300dpi/53 lpi / 300 dpi: "45.0"
*ColorSepScreenAngle ProcessCyan.53lpi.300dpi/53 lpi / 300 dpi: "71.5651"
*ColorSepScreenAngle ProcessMagenta.53lpi.300dpi/53 lpi / 300 dpi: "18.4349"
*ColorSepScreenAngle ProcessYellow.53lpi.300dpi/53 lpi / 300 dpi: "0.0"
*ColorSepScreenFreq ProcessBlack.53lpi.300dpi/53 lpi / 300 dpi: "53.033"
*ColorSepScreenFreq CustomColor.53lpi.300dpi/53 lpi / 300 dpi: "53.033"
*ColorSepScreenFreq ProcessCyan.53lpi.300dpi/53 lpi / 300 dpi: "47.4342"
*ColorSepScreenFreq ProcessMagenta.53lpi.300dpi/53 lpi / 300 dpi: "47.4342"
*ColorSepScreenFreq ProcessYellow.53lpi.300dpi/53 lpi / 300 dpi: "50.0"
*% For "Dataproducts LZR 2665" version 46.2
*% Produced by "GETapd.ps" version 2.0 edit 47
*% Converted to meet 4.0 specification
*% Last Edit Date: Sep 15 1992
*% The byte count of this file should be exactly 011228 or 011572
*% depending on the filesystem it resides in.
*% end of PPD file for Dataproducts LZR 2665

The NLS_LANG environment variable for Form Builder 10g on Linux

Hi,
I have installed Oracle Developer Suite 10g on Linux Enterprise AS4 successfully,and set environment variable NLS_LANG="SIMPLIFIED CHINESE_CHINA.ZHS16GBK",LANG="zh_CN.UTF-8".When i executed the following: /home/oracle/Orant/bin/frmbld
I got the error as:
X Error of failed request:BadFont(invalid Fond parameter)
Major opcode of failed request:56(X_ChangeGC)
Resource id in failed request:Ox2c000af
Serial number of failed request:3376
Current serial number in output stream 3517
FRM-18122: ’Form Builder Debugger.
If i delete the NLS_LANG environment variable,the Form Builder can be running,but i can't keyboard input[b] chinese characters in the PL/SQL Editor.
I don't know how to solve the problem,anybody can help me?

Hello Howard,
Check out the following link here you can find your desired NLS parameters.
http://www.oracle.com/technology/tech/globalization/htdocs/nls_lang%20faq.htm
And about the NLS_LANG for developer why you want to create for developer. Its is already there in REGISTRY. Just seaching in developer registry you can find there.
how do I set more than 1 at a time.
You can set only one NLS_LANG parameter at a time.
-Ammad
Edited by: Ammad Ahmed on Apr 15, 2010 8:52 PM

OCS 10g on Linux: Forbidden page displayed

OCS 10g on Linux: Forbidden page displayed
I have recently downloaded OCS 10g and installed on RHEL 4 i386
server with 4GB RAM and 40+9+9 GB Hard disk. The installation was
smooth though very time consuming, took almost 7 hours.
After installation when I access http://servername:7778, I get the
welcome page. When I click on any link I get the following error:
Forbidden
You don't have permission to
access /pls/orasso/orasso.wwsso_app_admin.ls_login on this server.
Oracle-Application-Server-10g/10.1.2.0.2 Oracle-HTTP-Server Server at
ocsserver Port 7778
I tried checking for errors in the log file and I found the following
entry in the apache log folder:
[Fri Sep 30 16:56:59 2005] [warn] [client 127.0.0.1] [ecid:
1128079619:127.0.0.1:8670:0:138,0] MOD_OC4J_0184: Failed to find an
oc4j process for destination: home
[Fri Sep 30 16:56:59 2005] [error] [client 127.0.0.1] [ecid:
1128079619:127.0.0.1:8670:0:138,0] MOD_OC4J_0145: There is no oc4j
process (for destination: home) available to service request.
[Fri Sep 30 16:56:59 2005] [error] [client 127.0.0.1] [ecid:
1128079619:127.0.0.1:8670:0:138,0] MOD_OC4J_0119: Failed to get an
oc4j process for destination: home
[Fri Sep 30 16:56:59 2005] [error] [client 127.0.0.1] [ecid:
1128079619:127.0.0.1:8670:0:138,0] MOD_OC4J_0013: Failed to call
destination: home's service() to service the request.
[Fri Sep 30 16:59:13 2005] [error] [client 127.0.0.1] [ecid:
94296745340,1] client denied by server configuration:
proxy:http://ocsserver.mshome.net:7777/pls/orasso/orasso.wwsso_app_admin.ls_login
Any ideas as to how to resolve the forbidden error.
Vipul Garg

Hello Richard,
Thank you for the reply. I have not replaced the text in error report. The hostname is ocsserver. I am not purposely using the fully qualified hostname as I tried installing with hostname as ocsserver.matpl (matpl is the domain name set on my local Windows NT server), I was unable to access the RTC url from a local network PC running Windows 2000/XP. To check the capability of RTC I have to run the RTC url on a Windows based system. Hence I did a reinstall of the OCS 10g without a domain name in the hostname. Though in the network setting I find mshome.net as the DNS domain search path set automatically in my Linux server. I tried removing it but it automatically sets in. Is this creating problem? But after installation I restarted the server I was able to run all the opmn services of infra. Only that I was getting a forbidden page and for that I changed the password of PORTAL and ORASSO schema. One more thing I find unsual is that whenever I start the machine I find that the schema PORTAL is LOCKED(TIMED) and I have to unlock it, but it gets locked automatically once databse is restarted. Why is it happening?
I checked the entries of processes and they are 250 as per the parameter. And 35 is the value as per the count of v$session.
Please provide your valuable ideas in resolving the issue.
Regards,
Vipul

After Migrating from 10g to 11g Geeting problems with Guided navigations.

After Migrating from 10g to 11g Geeting problems with Guided navigations and section navigations not working.
And we are getting the following error <<odbc driver returned an error (SQLExecDirectW)>> where we have used navigations.
In 10G we have Guided navigation Reports to display the Reports links and intermediate reports for conditionally displaying the Dashboard section(Reports) but after migrating to 11g Guided navigation reports and conditional reports are not working..
We know that in 11g section navigation replaced with conditions and Guided navigation replaced with action link.. but
do we need to recreate those reports in actions and condition or is there any work around avoid reworking.

Hi Both,
Thanks for the reply ...
For Guided navigation we are getting like below error:
Odbc driver returned an error (SQLExecDirectW).
For Conditional dashboard section we are getting like below error:
"saw.aViewsToRefresh = [];saw.aViewsToRefresh['d:dashboard~p:1egt6il5utl0uu8n~s:3jsmgfs3c1r4tn7c~n:condition'] = true;saw.aViewsToRefresh['d:dashboard~p:1egt6il5utl0uu8n~s:nos5q43jvjmi643b~n:condition'] = true;"

How can i install oracle 10g on linux cluster

Dear all:
please advice How can i install oracle 10g on linux cluster service ..
thanks ,,

Without RAC, you can only have one instance manage the database. One instance = one set of processes communicating via IPC.
Unless you know of a way to have processes use memory-based IPC across nodes, you need to pick a node and install & run the database software on that node.

Error while installing developer 10g on linux suse 10.0

Hi All,
This error appears while installing developer 10g on linux suse 10.0
http://img179.imageshack.us/my.php?image=errorso9.png

Try locate (using find command for example) the libjvm.so file (I assume that is located somewhere under $ORACLE_HOME (probably jdk or jre directory)). If you locate the path where this library resides, try to add that path to $LD_LIBRARY_PATH enviroment variable.
Use copy&paste method (for error message) rather than link to image.
It is much quicker operation and it may help to other people because they be able to find this thread via search engine.

How to install oracle 10g on linux 9.0

am a student in nigeria and my name is tosin, studing oracle 10g on linux 9.0 with oracle partners NIIT. how do i install 9i and 10g on a linux 9.0.

Hello Tosin,
how do i install 9i and 10g on a linux 9.0. Do you mean Red Hat Linux 9 of on Linux AS? www.redhat.com
Anyways
http://www.puschitz.com/InstallingOracle9i.html
Hope this will help you
Cheers
Ravi
http://ravidba-oracle.blogspot.com/

IC 10g on Linux character problems

Similar Messages

Maybe you are looking for