IC Agent Role Log - off
Hi Experts,
Does Bussiness Role IC Agent will not have log - off option( If their how to log off?) .
Can you please brief me on this.
regards,
Sarangamath
Hello
In CRM6.0 logoff button was not provided in IC agent role as was not necessary. All the unsaved data was saved at the end and when the browser was closed the session is deleted, so explicitly there was no need of logoff button.
Logoff was triggered when the browser is closed. Therefore a logoff button was not required.
In a CRM7.0 context, since all logic of the business roles have been modified, the logoff button was implemented.
Hope it helps
Joaquin
Similar Messages
-
Firefox 3.6.6 will not allow Windows 7 to log off or shut down
I have a HP DV6 laptop (32 bit) with Windows 7. Firefox 3.6.6. seems to work well but the computer became slow and unresponsive and it will not log off, shut down or restart unless in safe mode. I uninstalled FF 3.6.6. and Adobe Flash 10 and now it works fine. On my Compaq Desktop (64 bit) with Windows 7, FF 3.6.6. and Adobe Flash work just fine.
== This happened ==
Every time Firefox opened
== I upgraded to FF 3.6.6 and Adobe Flash 10 ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; GTB6.5; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; OfficeLiveConnector.1.5; OfficeLivePatch.1.3; .NET4.0C)I had same problem where Firefox 3.6.8 would not start or open. Spent many hours trying different things to fix it. Uninstall of previous version and reinstall did not make any difference. Finally, after uninstalling Firefox, I searched for Firefox folders and files on my computer, deleted and removed all Firefox folders and files - deleted anything and everything related to Firefox so that it will be as if I was going to download Firefox for the first time ever. Then, using another browser, I downloaded Firefox 3.6.8 and installed it. It could be that some Add-Ons or something else from the older version of Firefox or profile was interfering with the new one. It was easier to delete remove everything and install all over again clean than to figure out which part was causing the problem.
Keep in mind, when you delete all Firefox folders and files from your computer, you are deleting all your bookmarks and all your Add-ons. If you want to keep those bookmarks, you might want to save the URLs someplace safe to bookmark them again before deleting them. You need to re-install the Add-ons also. Upon installation, it asks if you want to import bookmarks and settings from another browser or settings you might have. I imported them from my other browser. Now, Firefox works. I also installed up-to-date Add-ons.
I hope this helps. Always keep more than one browser functioning on your computer, just in case one fails. -
How to add a Button on SUS top-right corner ( Near Log off button)
Hi Experts,
It's a bit urgent for me. Please give your valuable suggestions to achieve below scenario.
My requirement is :-
adding a button on top-right corner(near log-off button) of SUS screen.
when that button is clicked, a pop-up should appear, which shows a list of supplier IDs.
SUS user selects a supplier ID from this list.
Subsequently, PO, Invoices and other documents should be filtered out based on supplier ID selected.
Request you to help me how to achieve it technically. Thanks a lot.
Regards,
RatneshHi,
is that button really necessary or is it enough to achieve the functionality you are describing?
If the latter, this is standard SUS.
When you give that user the SUS admin purchaser role that user gets a 'find supplier' link in the menu at the left hand side.
In here you can search for the correct supplier (or just press search without parameters and you get a list. When you click on one of the results the user will act as if it is an employee of that supplier. Including only displaying documents of that supplier.
Regards,
Robin -
Placing clients in untrusted after log off of AS SSO
I have a L3 OOB NAC deployment with AD SSO. Users are mapped to different roles depending on OU membership and then to different VLANs. What happens is that if a user with a certain role logs on to a client and is palced in his VLAN, say VLAN10, and then logs off the PC, the PC stays in VLAN10.
Another user from a different role now comes along and logs onto that same PC stays in that same VLAN, but really needs to move to another VLAN because he/she has a different role.
If the system is rebooted then everything works fine as the SNMP linkdown trap is sent to the NAM.
How can I cause the clients using AD SSO change the role of the port to unauthenticated when they log off the system? I know that this can work with in-band but i don't know if it can be done with OOB.Sachin,
OOB Logoff feature is coming in 4.8, due out in late summer. Currently what you're looking to do can't be done.
HTH,
Faisal -
All agents were logged of automatically from agent dekstop
Hello,
We had an issue last week where all agents where logged of automatically. By the way we have UCCE version 8, CTIOS agent desktop 8, Call manager 8, and 7961 Cisco phones. Agents were able to log back in and everything seems to be working fine. We are running duplex mode in call center. on the CTIOS server it show in call manger the agent destkop unregister, however the call manager and switch logs doesnt show unregister. It is really weird and on the switch there isnt any errors that indicate that packets were loss, does any UCCE expert out there know what could of been the root cause. The error on the CTIOS server says cucm faulire for all those phones but phones werent unregistered.
Any Suggestion please help.
Thanks,All agents logged off, not just half? Typically when you run in duplex, half of those CTI OS Agent Desktops should connect to your secondary CTIOS server (50% chance at login). Are the effected agents all in the same location? To me this points to perhaps being a network issue if everyone was effected.
Can you run a report on the Logout codes for the effected agents? What logout codes were recorded for this event?
-Jameson -
Specify log off page for each system in WebUI
I am trying to define log off URL for the CRM WebUI. I have been able to define the URL on the technical profile. The problem for me is that the url points to a system specific page. In other words, when I define in the development system that I want to go to the logon page when I log off I use the URL of that points there. When this customizing later is transported to the quality system and later to the production system, the log off URL still points to the log on page of the development system.
Is there any way to specify that this url points to the log on page of the system that were logged off?Hi Erik,
this is not possible in the SAP standard AFAIK.
The URL in the customizing of the technical role profile is read using the method CL_CRM_UI_TP_SRV->GET_URL_PART( ). In order to implement your requirement you could, e.g. implement a custom table containing the client, system name and URL. Additionally, you could then enhance CL_CRM_UI_TP_SRV->GET_URL_PART( ) using an implicit enhancement spot to read this custom table an return the entry for the system ID if present and the default customizing otherwise.
Best,
Christian -
Hello All,
I am trying to execute a query in BEX. It does execute but after 10-15 minutes, I get automatically logged off.
The SAP GUI 710 and patch level is 16. What might be the problem?
And what role does the .dll file play in these query executions?
Kindly help.
Regards,
NIKEKABHi NIKEKAB & PRASHANTHK
Sorry to jump into your conversation, but i was wondering is this really a missing .dll issue?? or there is problem with query itself.
NIKEKAB are you able to run any other query or you can't run any query at all??
if you can run other query, then go to RSRT and then try to run this query with execute & debug with option "do not supress messages" there you can what exactly the problem is.
there could be possibility that if any the query changed, or some of the query elements not available then BEx will disconnect. but as u said it runs for 10-15 min then i doubt this could be the reason.
another possibility is there could be some objects which you dont have authorizations to use, but even in this case it wont run for 10-15min, you can see this in RSRT as well.
If you can give us more info that will be helpful to figure out what exactly the reason is.
Best Regards
Robyn. -
Hello All Oracle Experts,
I have a query regarding set role command.
I was sybase user and migrated to Oracle. Now oracle user.
I have two queries.
1. In sybase, By default, all the roles granted to a user are disabled. You need to enable it if you want to use. But in Oracle, it looks like by default, all the roles granted to a user are enabled. that means, when you login using that user, all the roles granted to it are enabled.
Can we change this behaviour ? I mean by default disabled all the roles
2. It looks like there is no way i can disable only one role in a particular session.. For example, i logged in with user User1. it has roles Role1 and Role2 (which are enabled). Now i want to disable only Role1 for that session and not Role2.
In sybase, i can do that by using Set role Role1 OFF.
Is there any equalent in oracle?
Please help me out in finding the answers. Please do let me know whether my observation regarding oracle or correct or not. You can even direct me to any documentation to know the answers.
I searched in this forum to see if there is any exisitng post. But unfortunately, looks like nobody got the problem which i was facing.
Thank you very much in advance for your time,
Venkatesh.what if there are 10 roles(R1,R2...R10) and u don't
know all of them. Have you really gone through the link which I had posted..
Here you go …
http://download-uk.oracle.com/docs/cd/B10501_01/server.920/a96521/privs.htm
Read it again..
Here you will find a view which gives info about - what are the roles are granted to you and which of them are default.
Select * from ….<read the doc and find the view and place it here t> ;
All you want is you have enabled role R3 in that
session and you want to disable it.
I read the posted links . But i didn't find the answer for whether we can disable one role >or not?I was wrong, that I thought you had read / understood what can be done with SET ROLE
Again in nut shell
Activating & Decactivating Roles
Activating A Role --->SET ROLE <role_name>;
Activating A Password Protected Role ---> SET ROLE <role_name> IDENTIFIED BY <role_password>;
Activating All Roles --->SET ROLE all;
Activating All Roles Except One --->SET ROLE all EXCEPT <role_name>;
Deactivating A Role --->Can not be done on an individual basis -
firefox regularly disables right click, bookmarking, etc and then I cannot even close it so I have to log off and log back on or restart my computer to fix it, then it happens again, ALWAYS happens, ALWAYS.
I just reset....
<pre><nowiki>Name Firefox
Version 29.0.1
Update History
User Agent Mozilla/5.0 (Windows NT 6.1; WOW64; rv:29.0) Gecko/20100101 Firefox/29.0
Profile Folder
Enabled Plugins about:plugins
Build Configuration about:buildconfig
Memory Use about:memory
Crash Reports for the Last 3 Days
Report ID Submitted
All Crash Reports (including 2 pending crashes in the given time range)
Extensions
Name Version Enabled ID
McAfee SiteAdvisor 3.6.6 false {4ED1F68A-5463-4931-9384-8FFF5ED91D92}
Important Modified Preferences
Name Value browser.cache.disk.capacity 358400
browser.cache.disk.smart_size_cached_value 358400
browser.cache.disk.smart_size.first_run false
browser.cache.disk.smart_size.use_old_max false
browser.places.smartBookmarksVersion 6
browser.sessionstore.upgradeBackup.latestBuildID 20140506152807
browser.startup.homepage_override.buildID 20140506152807
browser.startup.homepage_override.mstone 29.0.1
dom.mozApps.used true
extensions.lastAppVersion 29.0.1
gfx.direct3d.last_used_feature_level_idx 0
network.cookie.prefsMigrated true
places.history.expiration.transient_current_max_pages 104858
plugin.disable_full_page_plugin_for_types application/pdf
plugin.importedState true
privacy.sanitize.migrateFx3Prefs true
Graphics
Adapter Description Intel(R) HD Graphics Family
Adapter Description (GPU #2) NVIDIA GeForce GT 540M
Adapter Drivers igdumd64 igd10umd64 igd10umd64 igdumdx32 igd10umd32 igd10umd32
Adapter Drivers (GPU #2) nvd3dumx,nvwgf2umx,nvwgf2umx nvd3dum,nvwgf2um,nvwgf2um
Adapter RAM Unknown
Adapter RAM (GPU #2) 2048
Device ID 0x0116
Device ID (GPU #2) 0x0df4
Direct2D Enabled true
DirectWrite Enabled true (6.2.9200.16571)
Driver Date 11-28-2010
Driver Date (GPU #2) 11-3-2011
Driver Version 8.15.10.2253
Driver Version (GPU #2) 8.17.12.8577
GPU #2 Active false
GPU Accelerated Windows 1/1 Direct3D 10
Vendor ID 0x8086
Vendor ID (GPU #2) 0x10de
WebGL Renderer Google Inc. -- ANGLE (Intel(R) HD Graphics Family Direct3D9Ex vs_3_0 ps_3_0)
windowLayerManagerRemote false
AzureCanvasBackend direct2d
AzureContentBackend direct2d
AzureFallbackCanvasBackend cairo
AzureSkiaAccelerated 0
JavaScript
Incremental GC true
Accessibility
Activated false
Prevent Accessibility 0
Library Versions
Expected minimum version Version in use
NSPR 4.10.3 4.10.3
NSS 3.16 Basic ECC 3.16 Basic ECC
NSSSMIME 3.16 Basic ECC 3.16 Basic ECC
NSSSSL 3.16 Basic ECC 3.16 Basic ECC
NSSUTIL 3.16 3.16</nowiki></pre> -
SAP Web Gui does not completely log off.
Hi Experts,
I am having trouble with our web gui, I can log in without a problem and when i try to log out there is message shows that i am logged off but when i refresh the page it automatically logs in. It would only go back to the log on page if i exit the whole browser window. i am using mozilla for my web gui. any help on this matter would be much appreciated.Hi
Which version of Web browser ?
and also refer the SAP Notes
1777513 - WebGUI logoff does not work
1903478 - Session remains open after the logoff
BR
SS -
Log off problem in integrated ITS
Hi,
our cancel button for ending the application with an external ITS works fine and the exitURL which is deposit in the service file will be shown.
But with an integrated ITS it doesn't work. I know that this exitURL doesn't work in an integrated ITS.
So I left a redirect URL in the SICF > ErrorPages > Log Off Page > Redirected URL
but nothing happens after clicking the cancel button. The browser works and works but the old screen is still seen. What's wrong? Why the page will not be redirected to given Url?
Can anybody help me?
This works:
wgateURL(~command="logoff", ~exitURL="http://www.sap.com")
but we need a standard exit like described above and I think the way above should be right.
Thanks, SusanneThis was discussed recently.
check out this thread
Close the IE page on click of a button in the transaction
Regards
Raja -
Log off pop when navigating from SAP CRM Web IC to Utilities transactions
Hi Experts,
I have created about 100 transaction launchers for ISU transactions, which are linked to the navigation bar in the Web IC. If I Click on this link which should open an ISU trnsaction, it doesnt open the ISU transaction. Rather it gives me a pop up as LOG OFF. The problem is most of the transactions are opening up this way, but there are only a few that doesnt open up and gives a log off error.
The client mapping of CRM system and Utility system has been done.Hi Friends,
I have configured a transaction launcher for ISU transaction code EL27 and EL29,
I am facing the simular issue, when try to access these transaction from ICWC i face the same problem. Logged off successfully screen appears.
Please let me know if you resolved this error.
Thank you. -
How to log off from SNC portal
This is a very basic question. I did not find any button or menu option to log off. Sometimes I get the message that the transaction is still running in another session, and I find it very difficult to log off. I normally close the browser and then log off from the SCM system. But if I am not logged onto SAP and I open the portal directly, How do I log off?
Your help is appreciated.
Thanks
SoumenHi Soumen,
There is no logoff button in SNC Web portal.
You can close the SNC web protal to logoff.
About your issue when you logoff it will locks your query as it is not logoff straight a way solution is create another query so that you can use another query or go to transaction SM04 and logoff your user-
Regards,
Nikhil -
How to log off a single AD user from a list of servers
I have a user account I need to logoff from all servers in a list. For example domain\user2 needs to be logged off all servers in a list. Here is what I have so far:
foreach ($_ in get-content C:/servers.txt)
{(gwmi win32_operatingsystem -ComputerName$_).Win32Shutdown(4)}
The problem is all this does is log off the first user in the session list when you are looking at task manager. How could
I log off just a specific user?This thread on stackoverflow may be useful to you if the user is connected to an RD session on your servers: Powershell Log Off Remote Session
As a starting point:
$server = 'MyServer'
$username = "domain\usertologoff"
$session = ((quser /server:$server | ? { $_ -match $username }) -split ' +')[2]
logoff $session /server:$server
(the script listed logs the current user off, I changed it to all you to enter the username)
Jason Warren
@jaspnwarren
jasonwarren.ca
habaneroconsulting.com/Insights -
i just downloaded firefox and it wont let me log off my twitter. i did the 'automatically download bookmarks from chrome' option but i deleted them afterwards. tumblr and twitter were the only sites that already had me signed in when i visited them but tumblr let me sign out. everytime i try to log out of twitter it takes me to the usual screen they show when you log out (a promotion for the twitter app for mobile phones) but the little button at the top that tells you to sign in isnt there, instead it has the button for you to write a new tweet and it keeps my twitters background. since i just downloaded it i dont have any extensions or add ons and my cache is empty so i honestly dont know what to do. i tried troubleshooting but it didnt work and im not really good with coding, like once you tell me what to do i can do it, but i cant do it on my own, so i dont know if the file was like corrupted when i downloaded it or something...
Click the Orange Firefox button in the upper left hand corner, then hover over the arrow to the right of "History". Go to "Clear Recent History", and clear the following:
Time Range: Everything
Under Details check the following:
Cache
Cookies
Active Logins
Offline Website Data
Uncheck everything else. Click "Clear Now", then restart Firefox.
Maybe you are looking for
-
Java.lang.NullPointerException: When Get the PDF File Name
Hi, i try to follow the blog on <b>Handling FileUpload and FileDownload in NetWeaver Developer Studio(NWDS) 2004S</b> on /people/rekha.malavathu2/blog/2006/12/12/handling-fileupload-and-filedownload-in-netweaver-developer-studionwds-2004s as i create
-
Help me!
-
I am trying to use a product called Hitch, which allows you to transfer music between iPods. When I try to use my iPod 30gb with video, the product doesn't work (though it worked fine with an iPod mini and a nano). Anyway, the technical support peopl
-
What does "Offline (filter unavailable)" mean in the "fx" tab?
I opened a project that had been dormant for a few weeks. Uneter the "fx" adjustment tab, the usual "Motion" and "Opacity" are listed as applied effects. A third one is "Offline (filter unavailable)". I do nor recall what additional effect I appli
-
[BPM Governance] Asset management by OER
Hi Experts, IHAC that asked for a BPM asset management model. Once identified the BPM assets, they should be governed. Firstly, I need an approach more functional (without mention of technology/products). So, Does anybody know where I could find some