IC WebClient 5.0 Configuration Guide....

Hi,
Could someone please mail me the configuration guide for for IC WebClient (CRM Version 5.0) to my mail id [email protected]?
Thanks in advance...
Regards,
Phani.

Hello Shivraj,
As you said and as it's stated in several SAP Guides: 'Configuration guides are only available in SAP Solution Manager'
But I can't find the config guides in our Solution Manager system...Does our Solution Manager people need to do something in Solution Manager so that I can find the config guides in our Solution Manager?
If anyone has the answer please get back... so that I can put an end to my configuration guide hunt And does someone have a configuration guide for CRM 5.0? If so I would really appreciate if someone could mail it to me at [email protected]
Kind regards
Saima
Message was edited by: Saima Shah

Similar Messages

CIC Configuration Guide

Does anyone know if there is a configuration guide for the Interaction Center? I have the cookbook but that is basically for the BSP development of the WebClient. I'm looking for the configuration steps for setting up the Interaction Center.
Message was edited by:
T C Seguin

Go to this website:
http://help.sap.com/bp_crmv340/CRM_DE/
Click on "Technical Information".
Click on "C78: CRM Interaction Center (WebClient)".
Click on "Configuration Guide"

Process flow of letter of credit and configuration guide

Hi friends,
I want to know accounting entries at every stage in letter of credit for purchase transaction, so also requesting for configuration guide. Points will be assigned
my email id is [email protected]
Thanks
Edited by: keetu on Apr 22, 2008 8:35 AM

Hi,
Check these links.
http://forums.sdn.sap.com/thread.jspa?messageID=3537642#3537642
http://forums.sdn.sap.com/thread.jspa?messageID=5337739#5337739
Regards
Ayyallas

What is BDI or BDS spelled out? Jabber for Mac 9.2(1) Installation and Configuration Guide

I’m spending the day catching up on Jabber/IM&P release notes across the server/clients.
So I’m used to EDI and UDS, but we have a new acronym in the Jabber for Mac 9.2(1) Installation and Configuration Guide called BDI and BDS. However they don’t define what BDI stands for other than BDI is LDAP for non-windows
Clients and suggests it should be used for Jabber for Mac.
What is BDI or BDS spelled out? Something directory integration, but what is the B ?
Then to add to the mix they reference BDS which sounds like the old UDS (is UDS changing to BDS?)
How can Jabber get any more confusing…
I also noted in the Jabber Video for iPad 9.3.4 release notes that Apple is removing the Always Connect option in the near future. Manually launching Cisco AnyConnect Secure Mobility Client before making a call. This is going to upset some customers who like how Lync uses https and just works from anywhere with enhanced directory integration…

Basic Directory Integration. It's not new, we had it in the Windows clients as far back as CUPC. The distinction got introduced when EDI was introduced, relying on Windows ADSI APIs instead of the client making a native LDAP bind.
To my knowledge BDI/BDS are the same thing; I'm guessing S is 'service'. UDS remains unchanged.
I also noted in the Jabber Video for iPad 9.3.4 release notes that Apple is removing the Always Connect option in the near future.
Well, they lost a patent infringement lawsuit and chose to change the functionality instead of pay the troll. That's not Jabber's fault. Collaboration Edge will be the way to avoid this in the near future.
Please remember to rate helpful responses and identify helpful or correct answers.

In Solution Manager, where can I find the SRM 7.0 Configuration Guide?

Please give me directions on how to download the SRM 7.0 configuration guide within Solution Manager, these documents are not available on the service marketplace. We have sol manager 4 I believe, it's not sol manger 7.0.
Also, if you could send me the guide at matt.joseph at thq.com that would save me from losing more time trying to figure out Solution Manger
Thanks for your help.
Matt

Matt,
1. Log on to your SAP Solution Manager system.
2. To be able to access configuration documentation, create a project as follows:
1. Create your project with transaction SOLAR_PROJECT_ADMIN for project administration.
2. Connect your SAP system to SAP Solution Manager with transaction SMSY for the SAP Solution Manager system landscape.
3. Create a project structure and add the required scenarios for your SAP system to your project structure with the Business Blueprint transaction SOLAR01,
4. Add your SAP system configuration structures to your project structure with the configuration transaction SOLAR02.
3. Go to the project structure folder <project name> using transaction SOLAR02.
4. Access configuration documentation for SAP NetWeaver usage types at Configuration StructureSAP NetWeaver 7.0.
5. Access configuration documentation for all areas of SAP SRM at Configuration StructureSAP SRM <release>.
Nesimi

IPC in CRM 5.0 - Configuration guide

hello,
i'm looking for a configuration guide for IPC
under CRM 5 standalone (no R3 backend ).
thnx ..

Hallo Blackman,
Did you try working with the ´best practices'. currently we are using the BP for the CRM 5.0 implementation. This should be sufficient I suppose.
http://help.sap.com/bp_crmv150/CRM_DE/index.htm
Read the BP and it should be sufficient.
Regards,
Premchand.Kamarapu

Student self services - configuration guide or cook book

Dear All,
We have recently upgraded to EHP4 and enabled student self services.
But when I changed my program of study no workflow is triggered in the backend.
Do I need to do any configuration for this ?
Is there any configuration guide or cook book available for student self services.
Thanks in Advance,
Best Regards,
Aleem Mohiuddin.

Hi Aleem,
You can find cookbooks for configuring SLcM on the following page: Student Lifecycle Management [original link is broken]
For the 'Change of Program' functionality you need to configure the following workflow to your customer need: COP_APPROVAL (WS template: 29800011 via trx PFWS).
Please also make sure you have applied note 1321998.
Best regards,
Rob

Configuration Guide for Transaction Banking Process Chain - 0TB_DM_INIT_P01

Hi All,
Just wondering whether there is any Configuration Guide available for various Transaction Banking Process Chains, like, [0TB_DM_INIT_P01|http://help.sap.com/saphelp_nw70/helpdata/en/7e/0d6a99cbdf4873998b533e088b6a1b/frameset.htm], etc.
These process chains in Activity Status Coversion (i.e. Dormancy management) are quite complex and I have been able to activate the chains - but while running some of the processes are giving errors...
So, was wondering whether any Building Block Configuration Guide like CRM Analytics (or, others) available or not?
If not, should I just open an OSS ticket to get official guide from SAP?
Thanks for help.
~SSH.

Hi All,
Just wondering whether there is any Configuration Guide available for various Transaction Banking Process Chains, like, [0TB_DM_INIT_P01|http://help.sap.com/saphelp_nw70/helpdata/en/7e/0d6a99cbdf4873998b533e088b6a1b/frameset.htm], etc.
These process chains in Activity Status Coversion (i.e. Dormancy management) are quite complex and I have been able to activate the chains - but while running some of the processes are giving errors...
So, was wondering whether any Building Block Configuration Guide like CRM Analytics (or, others) available or not?
If not, should I just open an OSS ticket to get official guide from SAP?
Thanks for help.
~SSH.

SEEBURGER EDI &AS/2 adapter installation and configuration guides

hi ,
can any one provide me SEEBURGER EDI &AS/2 adapter installation and configuration guides or links please?
thank you,
babu

Hi,
You can get the original manuals from Seeburger if you are installing the Seeburger on server.
Please see the below links
/people/bla.suranyi/blog/2006/06/08/sap-xi-supports-edifact
/people/william.li/blog/2006/03/17/how-to-get-started-using-conversion-agent-from-itemfield
/people/paul.medaille/blog/2005/11/17/more-on-the-sap-conversion-agent-by-itemfield
http://www.stylusstudio.com/edi/XML_to_X12.html
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b0b355ae-0501-0010-3b83-8f2bb566fa47
Details on XI EDI adapter from seeburger
Check this for Conversions-
/people/bla.suranyi/blog/2006/06/08/sap-xi-supports-edifact
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
SAP Adapters
EDI with XI
http://www.seeburger.com
http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/SEEBURGER_SAP_Adapter_engl.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.sap.com/france/company/events/2006/02-01-Automotive-Seeburger.pdf
http://h41123.www4.hp.com/presentations/ISUG/XISeeBurger.ppt
http://www.sap.com/asia/company/events/nwtechdays/presentation/australia-slides/Pre-Built_Integration.pdf
http://www.seeburger.com
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.sap.com/france/company/events/2006/02-01-Automotive-Seeburger.pdf
http://h41123.www4.hp.com/presentations/ISUG/XISeeBurger.ppt
http://www.sap.com/asia/company/events/nwtechdays/presentation/australia-slides/Pre-Built_Integration.pdf
Regards
Chilla

Need configure guide for job progress monitor in JSM

Hello Guys,
I have received an requirement to setup job progress monitoring in JSM(job schedule monitor).i have done my search in Google for configuration guide, but i could not find it.
My Requirement:- i need to monitor the jobs progress(running on manage system) which consists on nearly 10 setps.End user need to monitoring the job progress using PI diagram.
Guys if any one of you have done this setup please help me with configuration setps.
Please provide your inputs on this.
Regards,
Pavan

Hi Pavan,
That should have been my place from where I would have start
I hope Jansi, Prakhar or Karthik can redirect you on this.
Meanwhile, If I get any thing, I will share it.
Regards

Loyalty Management Best Practise Configuration Guide

Dear all,
we set up Loyalty Management in our Demo-System (CRM 7.0 Level5) as it is described in the SAP CRM Marketing book.
Unfortunately we still have problems with:
- sales order integration
- execution of membership activities
Does anybody has a Best Pracise Configuration Guide for Loyalty Management, I can use as an additional guide beneath the SAP Marketing book to solve these issues and to check all system settings and the customizing?

Language                                                  German
English (Master)
Compare versions               SSCR         Download
In case, the page does not refresh automatically within 10 seconds
after finishing with correction activity,
please use the REFRESH button!
Refresh
Content:                                   Summary                  |                   Header Data                  |                   Validity                  |                   Attachments
I know this is a late post but will help other users who search.
Note - 1331970.
Symptom
Loyalty functionality in sales order
Solution
Please read the documentation below Setup for Integration of Sales Order with Loyalty for CRM 7.0 You can use this note to integrate the loyalty application with sales order to allow customers to earn reward points on purchase of products, redeem points and buy point products. To enable the above-mentioned functionality, the following set up has to be carried out in the system: -> Product master data You have to add SetType REWARD_PRO_LOY (created for product type Material) to the product category. You may create a new product category for loyalty products. You can add the settype to a product category using the following steps: 1. Use transaction COMM_HIERARCHY
2. Search for the category to be used for loyalty products
3. In the SetTypes tab under Category Data, add REWARD_PRO_LOY as the settype After the settype is added to the loyalty product category, it will appear as point information assignment block in the product overview page. Here, you can maintain point information for Accrual, Redemption and Buy Points scenarios. You have to select the Scenario, Point Type (Points, Miles etc) and enter the associated number of points. The following three activities are supported: -> Accrual
In this scenario, a customer buys standard products and earns reward points for his purchase. The actual points to be accrued will be maintained at product master data level. You have to select EARN as the loyalty scenario. Example: We have a product, Laptop T 61, which has 1000 reward points associated with it, at the product master level. If a customer buys this product a member activity will be created and 1000 points will be credited to his account. Note: You can maintain points for a product with a particular loyalty scenario in the point information assignment block of product overview page. -> Redemption
In this scenario, a customer redeems his points to buy products. In CRM 7.0, redemption products have 100% discount and can be bought only by points. The point value of such products will be maintained at product master data level in point information assignment block. You have to select REDEEM as the loyalty scenario. Example: We have a keyboard HT-1010, which has a price of 5000 points (and 100% discount). If a customer buys this product, a member activity will be created and 5000 points will be deducted from the customer's account. -> Buy Points
This functionality enables a customer to purchase points. The point value of such products will be maintained at product master data level under the point Information assignment block. You have to select BUYPOINTS as the loyalty scenario. Note:
Point information is maintained for 1 base unit of product .If the quantity and unit of measure are changed, the points will be calculated accordingly.
-> Customizing in SPRO You have maintained the following customizing settings in SPRO:
-> In the customizing activity Define Point Types for Sales-Order Integration, you maintain point types. For more information, see SAP Customizing Implementation guide   Customer Relationship Management Marketing Loyalty Management - Design Channel Integration Define Point Types for Sales-Order Integration Point Information in product master can be maintained only for these point types.
-> In the customizing activity Define Categories and Types for Sales Order Integration, you maintain member activity category, activity type, sales order status for which activity will be created and the processing delay ( Process On Hold) for a particular loyalty scenario. For more information, see SAP Customizing Implementation guide Customer Relationship Management Marketing Loyalty Management - Execution Member Activities Define Categories and Types for Sales Order Integration
-> In the customizing activity Define Transaction Types, you maintain the transaction types for accrual, redemption and buy points. For more information, see SAP Customizing Implementation guide Customer Relationship Management Transactions Basic Settings Define Transaction Types Note:
Reference transaction types LTAA, LTAR and LTAB are delivered for CRM IC and UIU. For web channel, transaction types ISLA, ISLR and ISLB are delivered. You can create new transaction types on project basis but transaction classification should be maintained as A, R and B for accrual, redemption and buy points transactions respectively. For redemption transaction LTAR, the item category is LTAR where the pricing process is maintained as 100% discount. Therefore, the net value will always be 0 for redemption items and only points will be charged. You have to maintain the condition 0R10 in pricing procedure. The pricing procedure 0CRM01 contains the details of condition 0R10. If you do not maintain 100% discount, then additional currency price will be displayed. For example, $200 + 100 MILES. Billing and delivery related customizing has to be done on a project basis. ----------------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------- Setup for Integration of Sales Order with Loyalty in EhPx for CRM 7.0 You can use this note to integrate the loyalty application with sales order to allow customers to earn reward points on purchase of products, redeem points and buy point products. To enable the above-mentioned functionality, the following set up has to be carried out in the system: -> Product master data You have to add SetType REWARD_PRO_LOY (created for product type Material) to the product category. You may create a new product category for loyalty products. You can add the SetType to a product category using the following steps: 1. Use transaction COMM_HIERARCHY
2. Search for the category to be used for loyalty products
3. In the SetTypes tab under Category Data, add REWARD_PRO_LOY as the SetType After the SetType is added to the loyalty product category, it will appear as point information assignment block in the product overview page. Here, you can maintain point information for Accrual, Redemption and Buy Points scenarios. You have to select the Scenario, Point Type (Points, Miles etc) and enter the associated number of points. The following three activities are supported: -> Accrual
In this scenario, a customer buys standard products and earns reward points for his purchase. The actual points to be accrued will be maintained at product master data level. You have to select EARN as the loyalty scenario. Example: We have a product, Laptop T 61, which has 1000 reward points associated with it, at the product master level. If a customer buys this product a member activity will be created and 1000 points will be credited to his account. Note: You can maintain points for a product with a particular loyalty scenario in the point information assignment block of product overview page. This is an optional activity. In many cases, the points accrued will not be maintained in the product master data but will be determined based on reward rules. In such cases, you do not have to maintain the SetType. -> Buy Points
This functionality enables a customer to purchase points. The point value of such products will be maintained at product master data level under the point Information assignment block. You have to select BUYPOINTS as the loyalty scenario. This activity is mandatory for Buy Points scenario. -> Redemption
In this scenario, a customer redeems his points to buy products. In CRM 7.0, redemption products have 100% discount and can be bought only by points. The point value of such products will be maintained at product master data level in point information assignment block. You have to select REDEEM as the loyalty scenario. Example: We have a keyboard HT-1010, which has a price of 5000 points (and 100% discount). If a customer buys this product, a member activity will be created and 5000 points will be deducted from the customer's account. Note:
Point information is maintained for 1 base unit of product .If the quantity and unit of measure are changed, the points will be calculated accordingly. Redemption functionality in Ehp1 for CRM 7.0 In case of redemption, you have three payment options to choose from. You choose the payment option in the customizing activity Define Mixed Payment for Sales Order Integration. For more information, see SAP Customizing Implementation guide   Customer Relationship Management Marketing   Loyalty Management Channel Integration Define Mixed Payment for Sales Order Integration a) Fixed redemption value from Product Master
The point information will be picked from the SetType as explained above and 100% discount will be given at item category level. Attached is the screenshot of the same. Using Pricing Process, you can select whether normal pricing is executed or 100% discount is given. In addition to the above-mentioned setting, a 100% discount condition should be included in the pricing procedure. For this purpose, you can use the standard condition 0R10 in the pricing procedure. b) Mixed redemption using Conditions and IPC With Ehp1 for CRM 7.0, mixed payment functionality is available. This enables a consumer to pay with points and money in a single sales transaction. You can maintain point prices as conditions in product master data under the Prices assignment block. The condition type
0LM1 with condition tables SAP002, 003 and 004 are used to maintain these point conditions as seen in the screenshot below. Select the option '0LM1_LM_SAP002' from the dropdown. Select 0LM1_LM_SAP002 from the dropdown. In the above screenshot, Price in Points = 100% point price , Max Price in Points = maximum points a consumer can spend, Min Price in Points = minimum points a consumer should spend for this product. Note:
In the above scenario, entries in Point Information assignment block will not be considered for redemption but the information will be picked from the conditions. A new usage LM is developed for points as conditions. You can use the customizing activity Condition Technique: Basics to develop condition tables, access sequences, condition types and point procedures.
For more information, see SAP Customizing Implementation guide   Customer Relationship Management Master Data Conditions and Condition Technique Condition Technique: Basics You can create condition objects with application CRM and usage LM. The point procedure 0LM001 is delivered and can be used in a sales transaction using the below the customizing Determine Point Procedures. Point information will be fetched by executing this procedure. For more information, see SAP Customizing Implementation guide   Customer Relationship Management Marketing Loyalty Management Channel Integration Determine Point Procedures You can assign this point procedure to a particular sales org, distribution channel, division, customer pricing procedure and document pricing procedure the same way it is done with pricing procedure. If you decide to use only points in a sales transaction (consumer has to pay 100% point price always), a standard pricing procedure with 100% discount would suffice. If you want to allow mixed pricing, for example, a consumer can pay anything between 1000 to 2000 points and rest in currency, then condition type 2902 (point based discount) should be included in the pricing procedure and 100% discount should not be chosen at item category level as explained above. The conversion rate between points and currency can be maintained in CRM UI in the following manner:
1. Go to Loyalty Management
2. Select Prices
3. Choose 2900 as the Price Maintenance Group
Attached is the screenshot of the same. Here 1 USD is maintained as 1 point. Product specific conversion rates are also allowed. Condition type 2901 is the reference condition type for 2902 and 2903 (used in flexible order and is described later in the section flexible order). Scales can be maintained for the conversion rates. For example, for the first 1000 Points it is 0.5 USD per point. From 1000 to 2000 points, it is 0.75 USD per point and from 2000 points onwards, it is 1 USD per 1 Point Example of Sales order Here, a product TV-1000 is maintained with Point price as 1000 Miles and Min Point price as 500 miles and Max point as 1000 Miles. A consumer purchases this product using a redemption transaction and spends 500 points. With a conversion rate of 1 USD equal 1 point, the net value becomes 500 USD + 500 Miles. If consumer spends 1000 Miles, the net value will be 0 USD + 1000 miles. Similarly, various combinations of maximum price and minimum price can be maintained in Product master and accordingly consumer can use his points to redeem products. c) Mixed payment using Flexible order If you do not wish to maintain point prices for individual products due to high volume of products, specifically in retail, then they you select this option where during the checkout, consumer will be given the option to use his points. Discount will be given based on the points spent at an item level. In this case, the only thing you have to maintain is a fixed conversion rate (condition type 2901). The transaction type will be the same as accrual. For example, a consumer purchases a product HT-1000 on which he can earn 1000 special points. During checkout, he will be asked to use his points. Use Point Payment will be enabled, and he can enter points he wants to redeem. If he decides to use 500 points, then a discount will be given to him based on the points spent. Here, with a conversion rate of 1 USD equal to 1 point, 500 USD discount will be given and accrual information will be lost. Hence, the points spent will be equal to 500. Discount Based on Member Basic and Lifetime Tiers In accrual transactions, discounts can be given to members who have reached a particular tier (Basic and Lifetime tiers). This can be maintained as a condition using the following steps:
1. In CRM UI, go to Loyalty Management
2. Select Prices
3. Choose 29MD as the Price Maintenance Group
Here, we can maintain the percentage discount on a product for a particular basic and lifetime tier. The condition type 29MD should be included in the pricing procedure of sales transaction to provide discounts. In sales order processing, you can check the discount under the assignment block Price Totals on the overview page. In this case, a 2% discount is given based on the above condition as shown in the third row) Generation of Billing Documents Once a sales order is created and saved, you can generate a billing document as a follow up activity. For loyalty sales transactions, the following three new fields are added to the billing document.
-> Points
-> Point type
-> Points spent In Accrual and Buy Points scenarios, Points = Points accrued; Point type = Miles, points etc; Points spent = 0 In redemption scenarios, Points = Total point price; Point type = Miles, Points etc; Points spent = points spent by the consumer To generate billing document from a sales order, you have to select a relevant billing option for the item category. In this case, we have selected Transaction-Related Billing According to Order Quantity. The billing will happen via CRM Billing.
Note: Only CRM Billing is currently supported
As billing will happen only if the order is replicated successfully to ERP (where shipping, delivery and logistics will be done), you have to ensure that all the master data, for example, products, BP (sold to party), conditions, etc are present in ERP along with the transaction type and item category (for example, LTAA and LTAN). Once replication is complete, we can create a billing document from the sales order overview page. Select Create Follow-up and choose Billing. -> Customizing in SPRO You have maintained the following customizing settings in SPRO:
-> In the customizing activity Define Point Types for Sales-Order Integration, you maintain point types. For more information, see SAP Customizing Implementation guide   Customer Relationship Management Marketing   Loyalty Management Channel Integration   Define Point Types for Sales-Order Integration Point Information in product master can be maintained only for these point types.
-> In the customizing activity Define Categories and Types for Sales Order Integration, you maintain member activity category, activity type, sales order status for which activity will be created and the processing delay (Process On Hold) for a particular loyalty scenario. For more information, see SAP Customizing Implementation guide Customer Relationship Management Marketing Loyalty Management Member Activities Define Categories and Types for Sales Order Integration
-> In the customizing activity Define Transaction Types, you maintain the transaction types for accrual, redemption and buy points. For more information, see SAP Customizing Implementation guide Customer Relationship Management Transactions Basic Settings Define Transaction Types
Note:
Reference transaction types LTAA, LTAR and LTAB are delivered for CRM IC and UIU. For web channel, transaction types ISLA, ISLR and ISLB are delivered. You can create new transaction types on project basis but transaction classification should be maintained as A, R and B for accrual, redemption and buy points transactions respectively. For redemption transaction LTAR, the item category is LTAR where the pricing process is maintained as 100% discount. Therefore, the net value will always be 0 for redemption items and only points will be charged. You have to maintain the condition 0R10 in pricing procedure. The pricing procedure 0CRM01 contains the details of condition 0R10. If you do not maintain 100% discount, then additional currency price will be displayed. For example, $200 + 100 MILES. Billing and delivery related customizing has to be done on a project basis. -> In the customizing activity Assign Product Hierarchy for Sales Order Integration, you register the product hierarchy if it is not the same as sales operation hierarchy. For more information, see SAP Customizing Implementation guide Customer Relationship Management Marketing Loyalty Management Channel Integration Assign Product Hierarchy for Sales Order Integration This customizing will help you create reward rules based on product categories and process them during creation of member activity using sales order. -> In the customizing activity Determine Pricing Procedure, you maintain 29CRLM as the pricing procedure for loyalty transactions. For more information, see SAP Customizing Implementation guide Customer Relationship Management Marketing Business Functions Pricing Pricing in the Business Transaction Determine Pricing Procedure For more information please refer to the attachment and IMG Documentation.

Self service procurement: Configuration guide. Release 500

Hello,
can somebody please mail me the "Self service procurement: Configuration guide. Release 500" to [email protected]
Can somebody tell me how to get it out of the solution manager?
Thankx a lot in advance
regards
stefan

Hi Dinesh
Could you please send me the Self service procurement - configuration guide. We also plan to explode this option, but do not know where to start.
Please send me the doc to [email protected]
Thanks in advance
Raj

PI(XI 7.0) configuration guides

Hi,
Does anybody have Post installation configuration guide for PI 7.0 ?
Our basis team has installed PI 7.0.But I couldn't see any Configurations completed like Integration Engine Configuration,RFC Connections(LCRSAPRFC,SAPSLDAPI.......)
and many other steps we use to do for XI 3.0.
Do we need to do all configration steps we use to do for XI 3.0 or is it different in PI 7.0.
any help appericiated.
Thanks,
Rekha.

Hi,
>>>>Do we need to do all configration steps we use to do for XI 3.0 or is it different in PI 7.
all user names are different (instead of XIDIRuser you have PI.... ) so the config is not the same
check this link:
http://help.sap.com/saphelp_nw2004s/helpdata/en/14/39084136b5f423e10000000a155106/frameset.htm
Regards,
michal

Configuration guide on Solution Manager Service Desk Scenario

Hi all,
I have just setup a Solution Manager 3.2 system and have followed the configuration guide, SP9.pdf which directs me to use SPRO to configure it. However, after going thru the SPRO, it doesn't gives me specific steps to setup the Service Desk scenarios. I could not find any specifc steps on creating a service Desk, business partners or configuration on the satelite system. Please kindly provide me with the relevant guide. Thanks in advance.

Hi Guan,
I don't know if my message is being sent too late for you, but only now I read your question..
You have to go through Customer Relationship Management configuration in order to customize Service Desk and Change Request Management the way you need. Before, I believe you must have in your hands the specification of your Organizational Structure, who will be each business partner in your organization, with the correct responsibilities, then you draw the workflow you want to implement, which is the complete landscape, have your RFC connection to SAP working in order to send support messages to them (this should be ok if you already have SolMan working, it needs the RFC connection in order to update the services..). Once you define your processes, based on the ITIL, then you can start configuring your Service Desk. Inside the IMG of the SolMan->Service Desk you have the CRM steps you need (if you have SP09 or up), and the documentation inside the IMG are really useful. If you are not used to CRM, I suggest you take a look at the CRM Documentation, because most of the things are better explained there. Actions, Conditions for Actions, Business partners, Installed Base with default business partners, Solution Database..
You may be a little bit confused reading the lots of docs that SAP delivers about SolMan Service Desk regarding using SLF1 or SLFN transaction Type. SLF1 was the old one, used by SolMan 3.1, and it has some differences from SLFN. In fact, SLF1 is more complex. It has items, SLFN does not. It uses a Service Confirmation, SLFN does not.. and so on..
If you need more information, please let me know. I have been working with Service Desk and Change Request Management for one year, in Scandinavia, maybe we can exchange tips.
Best regards,
Raquel Cunha
São Paulo, Brazil

Need Post installation configuration guide for PI 7.0

Hi,
Does anybody have Post installation configuration guide for PI 7.0 ?
Our basis team has installed PI 7.0.
Now we need to do the post installation.
Do we need to do all configuration steps we use to do for XI 3.0 or is it different in PI 7.0.
Your help appreciated.
Thanks,
Vinod

HI,
See the below links
Post Installation steps for activating Adobe Document Services in SAP XI NW 2004S
-/people/sravya.talanki2/blog/2006/11/15/post-installation-steps-for-activating-adobe-document-services-in-sap-xi-nw-2004s
Link for posnt installation guide
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/95d7d490-0301-0010-ce93-c58f9a3cde0b
https://websmp101.sap-ag.de/~sapidb/011000358700009389172004E.PDF
Regards
Chilla

IC WebClient 5.0 Configuration Guide....

Similar Messages

Maybe you are looking for