ICal a doesn't load events on my iPad

I've noticed that often, not always, when I click iCal on my iPad and the current month pops up, it shows a blank calendar. If I select the month prior, it pulls up that calendar with events on it and then, if I re-select the current month, the calendar now pops up with all of my events in view. This seems like a bug to me. Is anyone else noticing this and is there a work around?
Thanks!!

Mark,
I too have noticed those symptoms, but have not found a work-around.

Similar Messages

ICal Search doesn't find events in the "distant" future !!!

I posted this in LEOPARD and at the end, no resolution and "Fred II" recommended I post this is this Snow Leopard discussion - he sent me this link -- appreciate any comments!
Here's a bit of a disturbing one: I use iCal (Leopard, so iCal 3.0.8 1287) to keep track of many things- not just a meeting next week or a TO DO - but also for long-term planning. I wanted to enter a reminder for about December 2016 concerning social security - but first wanted to check if I hadn't already done this. I typed social in the iCal search box and everything through 2009 came up.
But, I said, that's a bit strange since I was almost sure I'd put something into iCal already.
OK so then I went to the date 28 August 2017 (shift-cmd-T) and once there, I did the same search - and voila - my event about "social security" from 17 Nov 2016 showed-up in the serach results section!!! (I later tried going to March 2016 and it worked as well - so seems it has to be within a few months / year from the date-- ?!?)
Went back to another date closer to today (28 March 2010) - it did not show up.
For other searches, some events for April 2010 have showed-up; but nothing 3 years in the future.
For some repeating items I get results showing 2008 - 2011, but never further than that if I start the search on today's date. (I get all events from past dates all the time).
Another "workaround" is that if I type the word social into Spotlight, it finds the 17 Nov 2016 event.
Is this a "bug" that iCal cannot find distant future events? Any comments or other people's experience really appreciated. It's not good, this - (like doing a search on an Excel Spreadsheet and only getting recently dated information or something like that. Not good).
Appreciate any feedback here.
Best regards,
Steve Schulte
Sunday 4 April 2010

"Ditto" Stephen's post. I've experienced the exact same anomaly with respect to iCal searches for distant future events.
Sincerely,
Jim Cole,
Jacksonville FL

ICal.app doesn't grab events/invitations from Mail.app

Morning.
My colleagues are using MS Outlook and send me invitations. I receive their emails with ICS attachments. In iCal.app I've activated »Preferences > Advanced > Automatically request invitations from Mail.app«. (I use a German GUI, therefore I do not exactly the terminology on an English GUI.)
But iCal.app does not grab and display such invitations.
What's wrong? What can I do to solve this serious problem?
TIA and kind regards, Friedrich

In fact the feed is at http://bongqiuqiu.blogspot.com/feeds/posts/default
The oldest post in the feed is November 10, and Mail is showing back as far as that - a total of 25 posts.
There may be older posts on the website, but many blog creation services limit the number of entries shown in the feed, moving older ones to an archive page and out of the page once that limit is reached. I don't know about Blogger, but I would assume that this is the case with this feed. You can expect the November 10 entry to disappear once a new one is added.

When I subscribe to a calendar it doesn't show events in my ical even though it is refreshed

When I subscribe to a calendar it doesn't show events in my ical even though it is refreshed & is linked to iCloud - any ideas please?

Is the calendar checked in the list of calendars in the popup menu in the upper left corner?

ICal Search doesn't find my events in the distant future !!!

Here's a bit of a disturbing one: I use iCal (Leopard, so iCal 3.0.8 1287) to keep track of many things- not just a meeting next week or a TO DO - but also for long-term planning. I wanted to enter a reminder for about December 2016 concerning social security - but first wanted to check if I hadn't already done this. I typed social in the iCal search box and everything through 2009 came up.
But, I said, that's a bit strange since I was almost sure I'd put something into iCal already.
OK so then I went to the date 28 August 2017 (shift-cmd-T) and once there, I did the same search - and voila - my event about "social security" from 17 Nov 2016 showed-up in the serach results section!!! (I later tried going to March 2016 and it worked as well - so seems it has to be within a few months / year from the date-- ?!?)
Went back to another date closer to today (19 May 2010) - it did not show up.
For other searches, some events for April 2010 have showed-up; but nothing 3 years in the future.
For some repeating items I get results showing 2008 - 2011, but never further than that if I start the search on today's date. (I get all events from past dates all the time).
Another "workaround" is that if I type the word social into Spotlight, it finds the 17 Nov 2016 event.
Is this a "bug" that iCal cannot find distant future events? Any comments or other people's experience really appreciated. It's not good, this - (like doing a search on an Excel Spreadsheet and only getting recently dated information or something like that. Not good).
Appreciate any feedback here.
Best regards,
Steve Schulte

Try a new post in the iCal forum. They have more experience with things like this.
DALE

ICal does not run one event that has a Applescript attached to it. 24u?

I have a number of reoccurring events in iCal that run a Applescript. Tow of them refuses to run. I have tried it as a Applescript and saved it as a run only and neither works (the script run fine if I test them by hand).
so I thought I have a look in the log and found this 24u information.
can anybody help out here? I am not sure why it appears, if it is good or bad, how to fix it and if it is at all realted to my problem. Other scripts seem to run well, it is this one and an other one that do not get activated by iCall.
They run on a MM running 10.6.8, iCall 4.0.4 (1395.7)
Thanks.
Log today:
19/09/2011 07:00:00          iCal Helper[211]          Error loading /Library/ScriptingAdditions/24U Appearance OSAX.osax/Contents/MacOS/24U Appearance OSAX: dlopen(/Library/ScriptingAdditions/24U Appearance OSAX.osax/Contents/MacOS/24U Appearance OSAX, 262): no suitable image found. Did find:
          /Library/ScriptingAdditions/24U Appearance OSAX.osax/Contents/MacOS/24U Appearance OSAX: mach-o, but wrong architecture
19/09/2011 07:00:00          [0x0-0x12012].com.apple.iCal.helper[211]          iCal Helper: OpenScripting.framework - scripting addition "/Library/ScriptingAdditions/24U Appearance OSAX.osax" declares no loadable handlers.
19/09/2011 07:45:01          iCal Helper[317]          Error loading /Library/ScriptingAdditions/24U Appearance OSAX.osax/Contents/MacOS/24U Appearance OSAX: dlopen(/Library/ScriptingAdditions/24U Appearance OSAX.osax/Contents/MacOS/24U Appearance OSAX, 262): no suitable image found. Did find:
          /Library/ScriptingAdditions/24U Appearance OSAX.osax/Contents/MacOS/24U Appearance OSAX: mach-o, but wrong architecture
19/09/2011 07:45:01          [0x0-0x28028].com.apple.iCal.helper[317]          iCal Helper: OpenScripting.framework - scripting addition "/Library/ScriptingAdditions/24U Appearance OSAX.osax" declares no loadable handlers.
19/09/2011 14:30:02          iCal Helper[1019]          Error loading /Library/ScriptingAdditions/24U Appearance OSAX.osax/Contents/MacOS/24U Appearance OSAX: dlopen(/Library/ScriptingAdditions/24U Appearance OSAX.osax/Contents/MacOS/24U Appearance OSAX, 262): no suitable image found. Did find:
          /Library/ScriptingAdditions/24U Appearance OSAX.osax/Contents/MacOS/24U Appearance OSAX: mach-o, but wrong architecture
19/09/2011 14:30:02          [0x0-0x73073].com.apple.iCal.helper[1019]          iCal Helper: OpenScripting.framework - scripting addition "/Library/ScriptingAdditions/24U Appearance OSAX.osax" declares no loadable handlers.

Hi,
It looks like the version of 24U's Appearance OSAX you have installed does not run on Lion.
I would contact the developer to see if they have a version that does yet. See http://www.24usoftware.com/AppearanceOSAX
Alternatively you could look to see if the Applescript really needs to use it.
Best wishes
John M
Edit: If you are running Snow Leopard, I think you may need to make the application "iCal Helper" (which you'll find in iCal's application package) run as 32 bit. I'd also suggest you check this with 24U.

Ical can´t save the event "event name" to the exchange server

I have been trying to set up iCal to work with exchange in several Macs runnig Snow Leopard but there seems to be some time zone issue.
When I try to save a new event, I get a error: iCal can't save the event "event name" to the exchange server. The account "account name" currently can't be modified, to discard... If I change the city in time zone preferences to anything outside Mexico (for example Dallas Tx.) then everything works perfect, the problem is all of my users are in Mexico City aund using CST instead may cause other problems.
I have tried with time zone support enabled and also disabled.
Something very odd is that existing events can be modified or deleted, even with the city set to Mexico in time zone preferences.
¿Any suggestions?

UPDATE 2: Found aother post that explains that this problem was fixed by enabling time zone support in iCal and then changing the city to the correct one by clicking in the upper right corner of iCal´s window where the time zone is displayed. https://discussions.apple.com/message/10108361#10108361
Well, I followed instructions mentioned above. By clicking on the upper right corner, a new window opens showing current iCal time zone settings (Not the same as Mac OS), in this window, time zone seems right (CDT), but as closest city, "UTC-UTC" is selected, so I change this to México and click OK, but the problem continues. If I go back to this iCal´s time zone window, "UTC-UTC" is still selected! and no mater how many times i change it back, after clicking OK, "UTC-UTC" comes back!.
Something else I just found out is that if the city is changed to anything outside Mexico within the same time zone in system preferences, as I mentioned before I can save events, but now in the upper right corner of iCal, I have two different CDT´s, one named "CDT Central Time" (the one that works) and other named "CDT Central Standard Time" (the one that doesn't).
My guess is that because daylight saving start and finish dates in Mexico are different from USA's, Apple created a different time zone with Mexico's rules (CDT CentralStandard Time) but something is wrong with it.

ICal has dropped a monthly event for the previous four months....... why did it disappear? and where is it? It was the same event but a different day each month.

iCal has dropped a monthly event for the previous four months....... why did it disappear? and where is it? It was the same event but a different day each month.

I installed this same digitizer in my T|X some weeks ago. Some discussion of my experience may be found in this Usenet posting and subsequent thread.
The stock digitizer in my T|X had always had some significant alignment issues (for which PowerDigi was able to compensate very nicely) and sensitivity which was uneven, but which usually required a heavier touch than I liked.
Eventually, it began to develop a “dead spot” near the upper left. My T|X was under warranty, so I probably ought to have sent it in to Palm to be repaired, but I wasn't willing to be without it for the required amount of time, and I've heard enough reports of other T|X owners getting unsatisfactory results this way. I'd heard enough good reports about the PDAPARTS.COm digitizer, that I decided that the only acceptable way to repair my T|X would be to install one of those.
After however many weeks it has been, I am still very pleased with the results. It continues to work flawlessly; it is much more sensitive, so it doesn't require nearly so heavy a touch, and I very much like the hard feel that it has, compared to the spongier feel of the stock digitizer.
My wife's T|X still has its stock digitizer, and it has so far not shown any of the same problems that mine did, or for which the T|X has become notorious, but the feel is noticeably inferior. She's content with it the way it is, but I think that if I were to ever buy another T|X for myself, I wouldn't wait for the stock digitizer to fail. The PDAPARTS.COM digitizer is simply superior in every imaginable way; and, in my opinion, a T|X with the PDAPARTS.COM digitizer installed is sufficiently superior to one with the stock digitizer (even if it isn't defective) to be very much worth the expense and trouble of installing it.
Post relates to: Palm TX

ICal subscription never shows new events

Hello,
Whenever I create a new event in iCal it doesn't appear in the iCals on machines that are only subscribing, rather than syncing. For example, my wife's subscription to my calendars never updates.
All the iCals that are syncing rather than subscribing (ie my MacBook, my iPhone and my me.com) show the new events.
Does anyone know why the subscription doesn't work or refresh in iCal? I've tried manually refreshing, but it's still not working.
Thanks.

Isn't it frustrating? I have the exact same problem. We (my wife and I) resort to deleting the subscriptions and starting all over again. Then it works for a while until we start having conflicting events that my wife can't see on my published agenda or vice versa.
Very frustrating and I have not found any solution.

Bug? My events on the iPad iCal app aren't shown in the year view if they are more than two years in the future.

My events on the iPad iCal app aren't shown in the year view if they are more than two years in the future even though I can see them on the month, week and day view. Any suggestions on how to fix it? I've tried it all. I called the apple support and they checked on their iPads. They all did the same and they couldn't help me. They suggested trying this way. I'd like to be able to plan a few years ahead and the year view would make thing so easy!
Is this a bug?

Go to the Home screen and double click the Home button. That will reveal the row of recently used apps at the bottom of the screen. Tap and hold on the app in question until it wiggles and displays a minus sign. Tap the minus sign to actually quit the app. Then tap anywhere on the screen above that bottom row to return the screen to normal. Then restart the app and see if it works normally.
Then reboot your iPad. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider until the Apple logo appears. Let go of the buttons and let the iPad restart. See if that fixes your problem.

Hello, My iCal don't synchronize older events than two or three month ago. How can I do to synchronize all my schedule? In iTunes it's all right in Calendars. I don't put a cross in "synchronize event older than ....... days". Thanks for answer.

Hello, My iCal don't synchronize older events than two or three month ago. How can I do to synchronize all my schedule? In iTunes it's all right in Calendars. I don't put a cross in "synchronize event older than ....... days". Thanks for answer.

Just saw your post. Better late than never. You may want to
consider GameBrix.com, where you can create Flash based, casual
games using your web browser. No downloads are required. You can
create a game from scratch using a library of images, sounds and
game mechanics. You can also upload your own. The online script
editor will allow you to view and edit the ActionScripts associated
with each game mechanic. In short, a great way to ramp up on game
design and build your own game without investing a lot of $
upfront.
BTW I am associated with GameBrix so any feedback is
appreciated.

New Icloud Terms and Conditions window pops up every time I try to check my email, or when I open setting. My email doesn't load because of this, so I haven't been able to check my email for months.

'New Icloud Terms and Conditions' window pops up every time I try to check my email, or when I open setting. My email doesn't load because of this, so I haven't been able to check my email for months. When I click, 'view terms' it takes me to my Icloud section in settings, but the terms don't pop up. I plugged it into my iTunes to see if it would pop up, but that didn't work either. My phone is updated, and I'm pretty sure I already accepted the new terms and conditions on the last update a few months back.

Hi munaxnight,
If you are having issues with your iPhone continuing to ask you to accept terms and conditions, you may want to try some things to troubleshoot.
First, quit all running applications and test again -
Force an app to close in iOS
Next, I would try restarting and if needed resetting the iPhone -
Restart or reset your iPhone, iPad, or iPod touch
If the issue is still present, you may want to restore the iPhone as a new device -
How to erase your iOS device and then set it up as a new device or restore it from backups
Thanks for using Apple Support Communities.
Best,
Brett L

How to Get property values from Shared Object in client's load event - Very urgent

I am using shared object to share data between two users. First user connect to shared object and set some value in shared object. Please consider that second user has not connected with the shared object yet.
Now when second user connects to the server and try to get that property set by first user, he could get shared object but could not get properties of Shared object set by first user. I observed few times that Second user can get these properties within "Sync" event between two users. But I would like to get these values for Second user in any stage (i.e. in load event etc.). Whenever Second user tries to get the property of Shared object, the object will reset the actual property value and then return reset value.
Anyone faced such issue while using shared object between two users. If so, I would appreciate if you could let me know your suggestions for following questions:
1) Is there any way to get all the properties of shared object before sync event called, as I want to get it immediately when second user connect to the application and perform next task based on the values stored in shared object.
2) Is it possible for second user to check whether any property has been set by first user? So that second user can use the property instead of reset it.
Any kind of help would be greatly appreciated.
Thank You.

I am using shared object to share data between two users. First user connect to shared object and set some value in shared object. Please consider that second user has not connected with the shared object yet.
Now when second user connects to the server and try to get that property set by first user, he could get shared object but could not get properties of Shared object set by first user. I observed few times that Second user can get these properties within "Sync" event between two users. But I would like to get these values for Second user in any stage (i.e. in load event etc.). Whenever Second user tries to get the property of Shared object, the object will reset the actual property value and then return reset value.
Anyone faced such issue while using shared object between two users. If so, I would appreciate if you could let me know your suggestions for following questions:
1) Is there any way to get all the properties of shared object before sync event called, as I want to get it immediately when second user connect to the application and perform next task based on the values stored in shared object.
2) Is it possible for second user to check whether any property has been set by first user? So that second user can use the property instead of reset it.
Any kind of help would be greatly appreciated.
Thank You.

I have downloaded my music off of my phone to my iTunes account on my computer, but when i download music on my laptop it doesn't load to my phone? How do i do it?

I have downloaded my music off of my phone to my iTunes account on my computer, but when i download music on my laptop it doesn't load to my phone? How do i do it?

Have you selected the music to sync?

When i connect to a wifi netwrok it connects just fine ..but the login page doesn't load and then i get the error cannot connect to login page because to many redirects occured

when i connect to wifi network the login page doesn't load and an error msg pops up sayin login page can't open because too many redirects occured and i get the same exact error msg with safari over wifi and with any application connecting to a wifi ( windows live messenger, skype, yahoo....)
can anyone help me plz??
thanks

I got the same error the other day. I'm not 100% sure what it is but I turned WiFi off, then back on again, and reconnected without the error.

ICal a doesn't load events on my iPad

Similar Messages

Maybe you are looking for