ICal advance dates and events (in 1 day) when I turn iPhone

Hi, Guys,
It's not such a huge problem, but I would like to have your help if some of you already had the same problem.
When I use iCal with my iPhone standed up it works perfeclty. But when I turn it (when I use it liyed down) to see the week calendar, the calendar of iCal avance in 1 day and all my iCal events also advance in one day.
For example, today is february 27, Monday.
With my iPhone standed up I see the right date (picture below):
But when its layed down I see that today's date is 26, Sunday (picture below):
Thanks in advance.
I know that it's not such a big problem, but I use iCal to much.
Hope you may help me.

Hello hirenlad20,
Thanks for using Apple Support Communities. 
To learn more about Touch ID, and how to troubleshoot issues with it, please follow the steps in the article below.
Using Touch ID on iPhone
Take care,
Alex H.

Similar Messages

  • ICal Issues- Dates and Events Being Changed

    I transferred to iCal when I bought a Macbook Air about 3 months ago and it has been a bit of a disaster.  It's annoying as I have iPhone/iPad and half of the point of buying the Macbook Air was compatibility between the calendars on all devices. The problem is that I alternate between using the "work" and "home" options and for some reason, if I put anything under the "work" option, it usually does one, or all of the following:
    1.) Changes event from "Work" to "Home"
    2.) In the case of multi day events (so, for example, a work trip spanning 3rd to 5th Feb), it reverts to just the first day (so the 3rd)
    3.) In the case of time specific events (so, for example, a meeting at 14:30 on 3rd Feb), it reverts to being all day and deletes the time
    Anyone got any ideas?  It's driving me absolutely insane...

    I just set an event for the 24th with a "2 minute before" alarm. I then dragged it to today 11/19 and the alarm went off 2 minutes before the new event time. I.e., the alarm time was automatically updated. Now if the alarm were set with the "on date" option, I wouldn't expect that to be updated. I'm using iCal Version 4.0.3 (1388).

  • How to Exchange Data and Events between LabVIEW Executable​s

    I am having some trouble determining how to design multiple programs that can exchange data or events between each other when compiled into separate executables. I will layout the design scenario:
    I have two VIs, one called Status and the other Graph.  The Status VI displays the serial number and status of each DUT being tested (>50 devices).  The Status VI has one timed loop along with a while loop that contains an event structure.  If the user clicks on the DUT Status Cluster the event structure needs to pass the serial number to the Graph VI.  The Graph VI when called fetches the records for the DUT based on the Serial Number and time frame.  This VI is a producer/consumer so the user can change the time frame of the records to display onto the front panel graph.
    I have a couple reasons the VIs need to be separated into independent applications. One being the underlying database fetches tends to slow the threads down between the two VIs; the other is that they may be distributed into separate systems (don't consider this in the design criteria).
    I have been researching the available methods to pass the serial number to the Graph VI.  My initial idea was to us a command line argument, but this does not allow the Status VI to pass another Serial Number to the Graph once it has started (I do not want to allow the user to execute multiple Graph applications because the database query can load down the server).
    Is there a program method that I can implement between the two VIs that will allow me to compile them as two executables, and allow the Status program the repeatedly send an updated serial number event to the Graphs program.
    I have reviewed many methods; Pipes (oglib_pipe), Action Engine, and Shared Variable.  I am not sure which method will give me the ability to use a Event driven structure to inform the Graphs program when to update the serial number.  Any suggestions and tutorials or examples would be greatly appreciated.

    I have used the Action Engine (aka: functional global) approach for many years and it works well. Something to think about is that if you make the event's datatype a variant the only code that will need to know the actual structure of the event will be the function that needs to respond to it. Hence, a single event can service multiple functions.
    Simply create a cluster containing an enum typedef that is a list of the functions that the event will service, and a variant that will be the function event data. From anywhere in the code you can fire the event (via the functional global) by selecting the function from the enum and converting function specific data to a variant. On the receiving end the event handler uses the enum to determine the function that is to get the data and sends the variant to it. The event handler doesn't know or care what the actual event data is so you could in theory add new functions without modifying the event handler.
    Mike...
    Certified Professional Instructor
    Certified LabVIEW Architect
    LabVIEW Champion
    "... after all, He's not a tame lion..."
    Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

  • Using GREP to bold Date and Event Name

    Hi
    I am stumped at how to properly apply a bold style to a combination of dates and event names using GREP. I am including three examples below. I do have Paragraph and Characters styles set up. The area I would like to effect the change is in all caps. I am trying to add a bold style only to the dates and the title of the event with out changing the rest of the information.
    I started of with this GREP Style:
    \d{1,2}\/\d{1,2}|\d\-?\s|\u
    It is bolding the dates and the name of the event. But it's not bolding the small dash between events that have a beginning and end dates or the en dash. It is randomly bolding other numbers and capital letters that it should not. Very frustrating. Each time I alter the GREP Style above, it makes it worse. This is as close as I got to the desired effect. Any ideas how to fix this?
    12/6-8 — HEALING WEEKEND AT TRUE NORTH HOLISTIC CENTER.  Friday  11am-5pm. Private Integrated Healing sessions, Friday 6:30pm-Sunday noon. “Blue Christmas” Retreat: Coping with Sadness at the Holidays; Sunday 3-7pm. Public Integrated Reiki™ clinic. Hubbardston, MA  www.truenorthholisticcenter.org. (978) 820-1139.
    12/6-12/8 — READ AND PLAY MUSIC IN A WEEKEND! World famous seminars turns beginners into musicians, revitalizes and inspires even pro musicians. 169 Mass Ave, Boston. (781) 599-1476 or http://signup.understandingofmusic.com or [email protected]
    12/7 — REIKI CERTIFICATION. Wilton, NH. Libby Barnett, MSW. 32 years experience. Reiki Energy Medicine author. Notebook, pin, certificate awarded. Credit cards accepted. CEU’s/contact hours. Call (603) 654-2787 or www.reikienergy.com. Reiki II: 12/8

    Thanks! That works. I am using a paragraph style for the body and have a bold character style for the information that needs to be bolded. I notice there are some listings that uses a colon and the bolding continued into the description where the first period appears (see samples below). I added a colon (to the shorter GREP style you suggested) in addition to the perod and excalamation point to search for.. Now the bolding stops at the colon but does not include up to the word "CARRY" (see first example). The second example, the bolding should stop after "FAIRE" but cotinues to the word Wisdom because of the period.
    I wish there was a option in the GREP drop menu to search for All Caps only and not Any Uppercase Letter. Is it a case were I need to manually edit those instances so it conforms to the norm? Or is there away to modify the GREP expression ^.+?[.!] to also include other instance like the example below?
    I alread try to add an additional rule using the Postive Look Ahead and nothing. And using the Any Uppercase Letter option, either forces the text back to the begining looking unstylized or it forces any capital letters to be bolded.
    12/8-12/13 — WESTERN REIKI MASTERS: BE ATTUNED TO CARRY Japan’s Gendai Reiki lineage: Usui Mikao-Kan’Ichi Taketomi-Kimiko Koyama-Hiroshi Doi-Audrey Pearson. Learn to teach all 4 levels of Japan’s Gendai Reiki Ho. www.yogapathways.com. (508) 740-9870 or Facebook: ‘Gendai Reiki America’
    11/23 — PSYCHIC AND HOLISTIC FAIRE at Women of Wisdom. North Easton, MA. Psychics, angel readings, mediums, crystal healings, Gaiadon Heart, chair massage, Reiki and more! Sign yourself up for a few appointments and bring your friends! www.womenofwisdominc.com (508) 230-3680.

  • How can I get missing contacts, notes, calendar dates and reminders that are just on my old iphone onto the iCloud for transfer to my new iPhone upgrade?

    Dear wise & wondeful people:
    How can I get missing contacts, notes, calendar dates and reminders that are just on my old iphone onto the iCloud for transfer to my new iPhone upgrade? Half of my contacts, notes, ect. were on my iCloud so have happily moved to my new iPhone but the rest are completely resistant. For example, on my iCloud I have 14 missing contacts starting with the letter A alone, however they are happily viewable on my old iPhone 4S and won't budge over into the iCloud.
    There are also 3 notes missing yet still acessible on my onld iPhone 4S, the list goes on.
    Your help would be most appreciated. Thank you so much.
    BCHR

    Hi BCHR,
    If you are having issues transfering your content from your old iPhone onto iCloud so it can be transfered to your new iPhone, you may find the following articles helpful:
    iOS: Transferring information from your current iPhone, iPad, or iPod touch to a new device
    http://support.apple.com/kb/HT2109
    iCloud: Troubleshooting iCloud Contacts
    http://support.apple.com/kb/TS3998
    iCloud: Troubleshooting iCloud Calendar
    http://support.apple.com/kb/TS3999
    iCloud: Notes overview
    http://support.apple.com/kb/PH12081
    Regards,
    - Brenden

  • HT201441 I have bought an used Iphone from a shop. then i put my account id in it. then it goes perfectly. After awhile i have done a reset all data and sitting then i could not get the Iphone started because it have been asked to put another email starti

    I have bought an used Iphone from a shop. then i put my account id in it. then it goes perfectly. After awhile i have done a reset all data and sitting then i could not get the Iphone started because it have been asked to put another email starting with u
    For contact [email protected]

    Sounds like the Activation Lock is still set to the previous owner. If you are unable to get that Apple ID and password that iPhone is totally useless to you.
    Take it back to the shop and demand your money back because they sold it to under false pretenses.
    Allan

  • I am no longer able to turn off cellular data usage for individual apps.  When I turn most of them off, they just automatically reset themselves to allow data usage.  Any thoughts?

    I am no longer able to turn off cellular data usage for individual apps. 
    When I turn most of them off, they just automatically reset themselves to allow data usage.
    Any thoughts?

    I am definately having the same problem and cannot believe there are no answers or even support that this problem exists.  I never have to post on forumns, I read what is usually readilly availiable for the craziest of problems. 
    Anyways, the problem is just that, I can toggle off a individual app's setting of cellular data availability, but it changes right back on rescreening.  After restarting, resetting etc, it seems that the big Apple Apps are the biggest offenders.  Music is a very important one, Podcasts can kill you very quickly, app store, Photos, Facetime, Stocks?!?!?!
    When one searches for solutions I have to see hundreds of links to "How great is ios7, you can turn off cellular data for individual apps FOR DUMMIES!".  I am a dedicated apple fool since the Apple IIe (long time), but when they run afowl it is usually really bad.  Why offer an on/off switch if the setting is always on?
    I am writing just to add support to the existence of this problem, not so much for people to offer ideas of solutions as I now believe it is in the coding.
    Thank you

  • HT1766 I disabled and blocked my phone when it was stolen, i have retrieved the phone and restored service. Now when i turned it on it says iphone disabled connect to itunes.. I have and no change, what do i do?

    I disabled and blocked my phone when it was stolen, i have retrieved the phone and restored service. Now when i turned it on it says iphone disabled connect to itunes.. I have and no change, what do i do?

    You need to restore the phone in itunes in order to use it again, You will have to put the phone into recovery mode and restore to factory settings   http://support.apple.com/kb/ht1808

  • Hello!   I am the bigest fan of APPLE!!! And i want to know when you lansate iPhone 6! My parents promised  me to buy One for me at my birthday!! Hello from romanian,Radu!    APPLE is the BEST!!!!!

    Hello!
    I am the bigest fan of APPLE!!! And i want to know when you lansate iPhone 6! My parents promised
    me to buy One for me at my birthday!! Hello from romanian,Radu!
      APPLE is the BEST!!!!!

    Sorry, no one here will have any knowledge of future iPhones.

  • I have downloaded pages 5 and installed and have been using it. when i turned my computer on today and tried to open a document, it was not there! How do i find pages 5?

    i have downloaded pages 5 and installed and have been using it. when i turned my computer on today and tried to open a document, it was not there! How do i find pages 5?

    Are you sure you are in the same User account as you installed Pages 5?
    Peter

  • How do I stop apps and docs from opening automatically when I turn on my laptop?

    How do I stop apps and docs from opening automatically when I turn on my laptop?

    system preferences>users and groups>select user>check boxes of apps you do not want to auto open.

  • Hello, I have a problem when I connect to the computer ipad 2 in itunes and click on the "Programs", itunes crashes and writes simply an error. when connecting the iphone does not. everywhere is version 7.0. Itunes is also the latest version. thank you

    Hello, I have a problem when I connect to the computer ipad 2 in itunes and click on the "Programs", itunes crashes and writes simply an error. when connecting the iphone does not. everywhere is version 7.0. Itunes is also the latest version. thank you

    There are multiple reasons that lead to issue. You should read the troubleshooting guide to get the right solution to solve the issue: iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support

  • I am looking for a timer that shows elapsed time since a particular date and time.  Showing days, hours, minutes etc.

    I would like to download an application for my desktop and maybe even my iphone that will tell me how many days, hours, minutes, etc have elapsed since a particular date.
    For example, my brother just had a baby and I want to put that date and time into the app and then determine how long it has been since that date and time.
    Hopefully this makes sense, because I have not been able to locate anything.
    Thanks in advance,

    This is fantastic.  Thank you.
    Is there any way to have something like this displayed on my desktop showing the time as it ticks away?

  • Calculating the next meeting date and the number of days until that

    Hi all,
    I created a meeting log page and I made a query that returns the most recent meeting date:
    to_char("MFR_MEETING_LOG_MAIN"."ML_MEETING_DATE",'MM/DD/YYYY')
    What I want to do is to calculate the next meeting date which is 6 month after the most recent meeting and the number of days until the next meeting.
    How do I do that? THank you very much for the help in advance!

    Basic SQL:
    Datetime/Interval Arithmetic.
    ADD_MONTHS function.
    If you're new to Oracle and SQL it may be advisable at this point to complete the Database 2 Day Developer's Guide.

  • I like to start my morning by looking at my email first thing in the morning  it helps my brain get jumpstarted and gives me a jump on the events of the day.I keep my iPhone encased in an Otter Box. Will this help protect it from steam when I take shower?

    I like to start my morning by reading my emails that came in during the night. This jumpstarts my brain and gives me an edge on the events of the day. Since my wife is still asleep when I get up I do this in the bathroom while I'm getting ready. I keep my iPhone 4 encased in an Otter Box case. Will this protect the phone from steam damage or should I thow it in a drawer while I take a short shower?

    TMI dude.
    You should be asking this to Otterbox but I'm guessing it depends on the specific Otterbox case... check the case specs at Otterbox.
    IMO, I would just leave it outside the bathroom... I'm sure your email can wait a few extra minutes.

Maybe you are looking for

  • Photos in a lesser quality after publishing

    I have a small logo in my site, and it lookes good in iweb, but its a little bit blurry in safari or firefox after publishing. Is there no way to control the jpg compression in iweb? or is the problem somthing else? I can not find anything about this

  • How to change title of a field in SAP Query

    Dear All, I have created a financial query. I want to change the field title which is displayed in the layout. Pls guide what is the process to change the title of a field appearing in the report. Regards Kundan Edited by: Kundan Pariyar on Jan 23, 2

  • Need help on setting up router

    Hi, I have a WRT54G wireless G router. I have a problem connecting to the internet through the router. If I connect an internet cable directly from my modem to my laptop, the internet works fine. If I connect the modem to the router and the router to

  • Pointer turned into a link hand, and I cannot click anything

    I cannot seem to find the keyboard hotkey that will allow my cursor to become an arrow again. My dog stepped on my computer and it's permanently a hand pointer (link pointer). No idea how to fix it without a reboot - but I don't want to do that yet.

  • Logic doesn't work

    recently moved my main hard drive to a new identical computer because of logic board failure and logic pro doesn't work? Anyone have this problem?