ICal Alarm Message Is Almost Off The Screen.
After a couple of years of having a weekly reminder message, I have recently started getting them 90% off the screen.
Although I drag them to the middle before closing them, the next one always appears 90% offscreen.
I did update to Tiger but I am sure I received "normal" ones at first.
Any ideas?
Ian.
You aren't the only one - see this (very long) thread:
http://discussions.apple.com/thread.jspa?threadID=671199&tstart=0
Powerbook G4 1.5 GHz Mac OS X (10.4.8) 1.5 GB Ram
Similar Messages
-
The min, max & exit buttons on upper right can barely be seen. They're almost off the screen
''Duplicate post, continue here - [/questions/779259]''
I was reading an e-mail & zoomed in to enlarge print. Now the top header line is too high & almost off the screen in both Firefox & Thunderbird. Zooming out didn't help. Thanks for any help.I would like to I also tried in the following order:
• running in Firefox safe mode
• deleting Firefox and re-installing it
• removed all video playing programs except MS media Player
Had no effect on either problem -
My ipad is giving me the message "this ipad hasn't been backed up in 32 weeks..." but I cannot get the message to clear off the screen. When I plug the ipad into my computer to back it up the message still will not clear off the screen and I cannot acess anything on the ipad. I cannot even power it off.
Welcome to the Apple Community.
You might try a forced shutdown to begin with, hold down the top and home buttons together until the device shuts down, then restart it. -
The top of my screen is normal: the tool bar starts "File, Edit...
The body of the screen while running Firefox-and during typing of this message- is full of lite. The actual data: starting from the top of this page- "Firefox Help... Ask a new..." etc. starts 5 1/4 inches from the left of the page.
It's as if Firefox were presenting a wider page with the presentation moved to the right. This pushes the last, normal, 5" of the presentation off the screen.
The rite end of the bar which starts out: http://www.mozilla.com/en-US/firefox/fx/
is off the page, so the facilities at the rite end are lost.
Any presentation, including Amazon.com and Youtube.com are similarly pushed off the rite side of the screen by 5".
I have no access to the rite-most 5" of any internet presentation.
The sliders that move the presentation up and down and left/ rite are off the screen.
I have shrunk the display down so small, i can barely see the numbers: Control panel\ display \ settings \ 1920 by 1200. This gives the ILLUSION of centering the presentation, but still no sliders. At this setting, i can see the full width of Amazon. Youtube appears centered, with 4 1/4" on both left and rite, but no edge sliders.
I dropped the 'setting' to 1440 x 900.
Lost about 3" off the rite side of Amazon; barely on the rite edge of Youtube.
None of my local programming has a problem: Excel, pictures, videos, Word, even Internet Explorer goes full page and centered.
I un-installed Firefox and downloaded it fresh. It did NOT ask me to reboot my puter, so i didn't .
I can supply pictures (screen shots) of the phenomenon on request.- Open Firefox -> got to Help Menu -> select "Restart with Add-ons Disabled"
Firefox will close then it will open up with just basic Firefox. You can enable the Add-ons later. Check if its working. -
MacBook Pro Display (window) shifts off the screen when I move my mouse
With a slight move with my magic mouse, my entire open window will shift completely off the screen with only a part of the window still visible. I have to click on the exposed edge of the window for it to shift back into place. It's only the window of the program that I have open that moves. The dock and the desktop image stays in place. I'm using an HP external monitor now but it was doing this before I hooked up the monitor. I've tried maximizing and minimizing my window but that does not seem to have an effect. Could it be the magic mouse? Thanks in advance for any help.
Wow. The power of Google is truly amazing. Just a little while ago, my husband was going nuts with our computer. I googled the words 'when I move my mouse to the left, the screen moves to the right'. And, Eureka! What do you think was the first thing that popped up on Google?
Well, the answer to my question, of course!:P Which led me right to here. It may not have been me that asked the question, but this did answer MY question!
Apparently this applies to Leopard too. Thanks alot!
Message was edited by: Linda Schodowsky -
I have just installed the latest software iOS 8.1.2 on my iPhone 4 s now i keep getting this message come up on the screen connect ti iTunes to use push notifications
Hello RogerfromCoulsdon,
In order to resolve this issue where you get the popup message to connect to iTunes to use push notifications, please reset your network settings.
Reset iPhone settings. Go to Settings > General > Reset, then choose an option:
Reset Network Settings: When you reset network settings, previously used networks and VPN settings that weren’t installed by a configuration profile are removed. (To remove VPN settings installed by a configuration profile, go to Settings > General > Profile, select the profile, then tap Remove. This also removes other settings or accounts provided by the profile.) Wi-Fi is turned off and then back on, disconnecting you from any network you’re on. The Wi-Fi and “Ask to Join Networks” settings remain turned on.
Reset iPhone settings - iPhone
Thanks for using the Apple Support Communities!
Cheers,
Alex H. -
iPhone 6. While talking on the phone, email interferes w/audio for other party. Email message pops-up on the screen and the other party cannot hear me until I click "close" & remove the message. Ideas??
Alex, thanks for the reply but it did not answer my question. I only want to turn off notifications & interruptions while I am on the phone. For this desired result, the only way the Do Not Disturb feature would help is if I manually turned it on before each phone conversation. Since my phone rings at random times, this is not possible. Basically, I just want to "opt out" of call-waiting. When I had a landline I never had call waiting. I don't want to be interrupted. But beyond that, even if I am being interrupted why are these notifications preventing the other party from hearing my voice?
-
Duplicate discussion - please see:
LG Optimus Zone. is there anyway to take the carama button off the screen and use one of the physical buttons on the pho…
Message was edited by: Admin ModeratorHello jr1984
Awesome question. Unfortunately there isn't a way to reassign the buttons. There may be a 3rd party application for the camera that would have a different option.
JoeL_VZW
Follow us on Twitter @VZWSupport -
I have a new iphone and went into Itunes and it said my new iphone needed a software update. I let it do this and now the apps that I put on won't work and when pressed just flash on then off the screen. I paid £20 for one of them so any help would be appreciated.
Memory Map: http://www.memory-map.co.uk/iphone/
0870: http://www.simonmaddox.com/
Viber: http://support.viber.com/home
VoucherCloud: http://questions.vouchercloud.com/ -
Had an app (Ultimate History Quiz) that I played frequently. It came up on the screen in the smaller iPhone version. Then I downloaded iOS 7.0.2, and now the app is so big that the printing goes off the screen, making it impossible to play. I checked the app sore to buy another one, and it is no longer available on there. WHAT CAN I DO TO RESTORE THE GAME TO ITS ORIGINAL SIZE???????
Wait for apple to tweak things....or talk to the app developer. they haven't updated since the update and unless APple happens to fix whatever the issue is, then the burden is on history to make their app work with the iOS
-
[FIXED BUT NOT SOLVED] NVIDIA - Desktop shifted left off the screen...
Hello Community!
For a pretty long time right now, I am trying to fix the video setup of my HTPC but without success. Because I'am run out of ideas, I really need Your help.
PROBLEM:
The desktop is shifted left off the screen, round about 100 Pixel.
It started some time in the past, while upgrading a one year old Ubuntu installation (NVDIA drivers). Because I couldn't fix it and also wanted to replace Ubuntu with ArchLinux, I performed a clean ArchLinux installation.
First I used the nouveau drivers ending up with the same problem. I read an configured using xrandr and cvt, but with no success.
So I restored the system to a snapshot taken before X11 and nouveau drivers installations, thank's BTRFS, and installed the proprietary NVIDIA drivers ending up with the same problems. Again I tried all the tips and tricks found in the documentations and forums, used nvidia-xconfig, hand crafted the xorg.conf all with no success.
HARDWARE
The system is a MSI Media Live (http://www.msi.com/product/desktop/Media-Live.html)
. Support AMDR Athlon 64 X2, Athlon 64 and Sempron in the Socket AM2 package
. North Bridge: nVidia® C51PVG Chipset
. South Bridge: nVidia® MCP51 Chipset
. Graphics is Integrated NVIDIA GPU GeForce 6150 LE
. VGA, SCART and HDMI - Connectors
The display Problem is on VGA and HDMI now, where in the past the VGA was perfect. Therefor I connected and used the VGA port only, in all tests.
INSTALLATION HISTORY
2012-12-30 + Installation according ArchLinux install guide
2012-12-31 + pacman -S openssh
systemctl start sshd
2012-12-31 + pacman -S btrfs-progs
2012-12-31 pacman -S sudo
2012-12-31 + sudo pacman -S bash-completion
2013-01-03 + pacman -S rsync wget gptfdisk
2013-01-10 + pacman -Suy nvidia-304xx
2013-01-10 + pacman -Syu nvidia-304xx-utils
2013-01-10 + pacman -S xorg-server xorg-xinit xorg-server-utils
2013-01-10 + pacman -S mesa
2013-01-10 + pacman -S xorg-twm xorg-xclock xterm
2013-01-10 + pacman -S ttf-dejavu
2013-01-10 + pacman -Suy lxdm
2013-01-10 + systemctl enable lxdm.service
2013-01-10 + pacman -S xorg-xdpyinfo
2013-01-10 + pacman -S pkgtools
2013-01-10 + pacman -S pkgfile
2013-01-10 + pacman -S bc
As You can see, I installed only a minimal X11 environment for test. The lxdm display manger shows up but with very small font and shifted to the left. Only if I force a resolution of 1024x768 the image is centered on screen/tv but still the very small font. Obviously not a solution for a HTPC.
Here are the xorg.conf and the Xorg.0.log of my last test configuration.
xorg.xonf
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 304.64 (buildmeister@swio-display-x86-rhel47-12) Tue Oct 30 12:04:46 PDT 2012
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 100 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection
In the Section "ServerLayout" I modified the line
Screen 0 "Screen0" 100 0
by adding the 100 0 at the end.
Xorg.0.log
[ 12.997]
X.Org X Server 1.13.1
Release Date: 2012-12-13
[ 12.997] X Protocol Version 11, Revision 0
[ 12.997] Build Operating System: Linux 3.7.0-1-ARCH x86_64
[ 12.997] Current Operating System: Linux media-pc 3.6.11-1-ARCH #1 SMP PREEMPT Tue Dec 18 08:57:15 CET 2012 x86_64
[ 12.997] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=0f1f870d-ccaa-4bc2-b149-1792f0c69fce
[ 12.997] Build Date: 16 December 2012 04:45:14PM
[ 12.997]
[ 12.997] Current version of pixman: 0.28.2
[ 12.997] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 12.997] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 12.998] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Jan 18 13:18:12 2013
[ 13.065] (==) Using config file: "/etc/X11/xorg.conf"
[ 13.065] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 13.066] (==) ServerLayout "Layout0"
[ 13.066] (**) |-->Screen "Screen0" (0)
[ 13.066] (**) | |-->Monitor "Monitor0"
[ 13.066] (**) | |-->Device "Device0"
[ 13.066] (**) |-->Input Device "Keyboard0"
[ 13.066] (**) |-->Input Device "Mouse0"
[ 13.066] (==) Automatically adding devices
[ 13.066] (==) Automatically enabling devices
[ 13.066] (==) Automatically adding GPU devices
[ 13.213] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 13.213] Entry deleted from font path.
[ 13.213] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 13.213] Entry deleted from font path.
[ 13.222] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 13.222] Entry deleted from font path.
[ 13.222] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 13.222] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 13.223] Entry deleted from font path.
[ 13.223] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 13.223] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/
[ 13.223] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 13.223] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 13.223] (WW) Disabling Keyboard0
[ 13.223] (WW) Disabling Mouse0
[ 13.223] (II) Loader magic: 0x7fcc40
[ 13.223] (II) Module ABI versions:
[ 13.223] X.Org ANSI C Emulation: 0.4
[ 13.223] X.Org Video Driver: 13.1
[ 13.223] X.Org XInput driver : 18.0
[ 13.223] X.Org Server Extension : 7.0
[ 13.226] (--) PCI:*(0:0:5:0) 10de:0241:1462:3290 rev 162, Mem @ 0xfd000000/16777216, 0xd0000000/268435456, 0xfc000000/16777216, BIOS @ 0x????????/131072
[ 13.226] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 13.226] Initializing built-in extension Generic Event Extension
[ 13.226] Initializing built-in extension SHAPE
[ 13.226] Initializing built-in extension MIT-SHM
[ 13.226] Initializing built-in extension XInputExtension
[ 13.227] Initializing built-in extension XTEST
[ 13.227] Initializing built-in extension BIG-REQUESTS
[ 13.227] Initializing built-in extension SYNC
[ 13.227] Initializing built-in extension XKEYBOARD
[ 13.227] Initializing built-in extension XC-MISC
[ 13.227] Initializing built-in extension SECURITY
[ 13.227] Initializing built-in extension XINERAMA
[ 13.227] Initializing built-in extension XFIXES
[ 13.227] Initializing built-in extension RENDER
[ 13.227] Initializing built-in extension RANDR
[ 13.227] Initializing built-in extension COMPOSITE
[ 13.227] Initializing built-in extension DAMAGE
[ 13.227] Initializing built-in extension MIT-SCREEN-SAVER
[ 13.227] Initializing built-in extension DOUBLE-BUFFER
[ 13.227] Initializing built-in extension RECORD
[ 13.227] Initializing built-in extension DPMS
[ 13.227] Initializing built-in extension X-Resource
[ 13.227] Initializing built-in extension XVideo
[ 13.227] Initializing built-in extension XVideo-MotionCompensation
[ 13.227] Initializing built-in extension XFree86-VidModeExtension
[ 13.227] Initializing built-in extension XFree86-DGA
[ 13.227] Initializing built-in extension XFree86-DRI
[ 13.227] Initializing built-in extension DRI2
[ 13.227] (II) LoadModule: "glx"
[ 13.414] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 15.559] (II) Module glx: vendor="NVIDIA Corporation"
[ 15.559] compiled for 4.0.2, module version = 1.0.0
[ 15.559] Module class: X.Org Server Extension
[ 15.559] (II) NVIDIA GLX Module 304.64 Tue Oct 30 11:18:32 PDT 2012
[ 15.560] Loading extension GLX
[ 15.560] (II) LoadModule: "nvidia"
[ 15.560] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 15.868] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 15.868] compiled for 4.0.2, module version = 1.0.0
[ 15.868] Module class: X.Org Video Driver
[ 15.868] (II) NVIDIA dlloader X Driver 304.64 Tue Oct 30 10:59:51 PDT 2012
[ 15.868] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 15.868] (++) using VT number 7
[ 15.875] (II) Loading sub module "fb"
[ 15.875] (II) LoadModule: "fb"
[ 15.984] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 16.008] (II) Module fb: vendor="X.Org Foundation"
[ 16.008] compiled for 1.13.1, module version = 1.0.0
[ 16.008] ABI class: X.Org ANSI C Emulation, version 0.4
[ 16.008] (II) Loading sub module "wfb"
[ 16.008] (II) LoadModule: "wfb"
[ 16.008] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 16.025] (II) Module wfb: vendor="X.Org Foundation"
[ 16.025] compiled for 1.13.1, module version = 1.0.0
[ 16.025] ABI class: X.Org ANSI C Emulation, version 0.4
[ 16.025] (II) Loading sub module "ramdac"
[ 16.025] (II) LoadModule: "ramdac"
[ 16.025] (II) Module "ramdac" already built-in
[ 16.025] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 16.025] (==) NVIDIA(0): RGB weight 888
[ 16.025] (==) NVIDIA(0): Default visual is TrueColor
[ 16.025] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 16.026] (**) NVIDIA(0): Enabling 2D acceleration
[ 19.582] (II) NVIDIA(GPU-0): Display (Acer AT3220 (CRT-0)) does not support NVIDIA 3D
[ 19.582] (II) NVIDIA(GPU-0): Vision stereo.
[ 19.584] (II) NVIDIA(0): NVIDIA GPU GeForce 6150 LE (C51) at PCI:0:5:0 (GPU-0)
[ 19.584] (--) NVIDIA(0): Memory: 262144 kBytes
[ 19.584] (--) NVIDIA(0): VideoBIOS: 05.51.28.56.19
[ 19.584] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 19.584] (--) NVIDIA(0): Valid display device(s) on GeForce 6150 LE at PCI:0:5:0
[ 19.584] (--) NVIDIA(0): Acer AT3220 (CRT-0) (connected)
[ 19.584] (--) NVIDIA(0): TV-0
[ 19.584] (--) NVIDIA(0): DFP-0
[ 19.584] (--) NVIDIA(0): Acer AT3220 (CRT-0): 350.0 MHz maximum pixel clock
[ 19.585] (--) NVIDIA(0): TV-0: 400.0 MHz maximum pixel clock
[ 19.585] (--) NVIDIA(0): TV encoder: (null)
[ 19.585] (--) NVIDIA(0): DFP-0: 310.0 MHz maximum pixel clock
[ 19.585] (--) NVIDIA(0): DFP-0: Internal Single Link TMDS
[ 19.585] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 19.585] (**) NVIDIA(0): device Acer AT3220 (CRT-0) (Using EDID frequencies has
[ 19.585] (**) NVIDIA(0): been enabled on all display devices.)
[ 19.585] (==) NVIDIA(0):
[ 19.585] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 19.585] (==) NVIDIA(0): will be used as the requested mode.
[ 19.585] (==) NVIDIA(0):
[ 19.585] (II) NVIDIA(0): Validated MetaModes:
[ 19.585] (II) NVIDIA(0): "CRT-0:nvidia-auto-select"
[ 19.585] (II) NVIDIA(0): Virtual screen size determined to be 1360 x 768
[ 19.587] (WW) NVIDIA(0): Unable to support custom viewPortOut 1360 x 765 +0 +1
[ 19.588] (WW) NVIDIA(0): Unable to support custom viewPortOut 1360 x 765 +0 +1
[ 19.589] (--) NVIDIA(0): DPI set to (49, 48); computed from "UseEdidDpi" X config
[ 19.589] (--) NVIDIA(0): option
[ 19.589] (--) Depth 24 pixmap format is 32 bpp
[ 19.599] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 19.599] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 19.599] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 19.599] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 19.599] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 19.599] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 19.599] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 19.599] (II) NVIDIA(0): Config Options in the README.
[ 19.599] (II) NVIDIA(0): Setting mode "CRT-0:nvidia-auto-select"
[ 19.754] Loading extension NV-GLX
[ 19.797] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 19.797] (==) NVIDIA(0): Backing store disabled
[ 19.797] (==) NVIDIA(0): Silken mouse enabled
[ 19.798] (**) NVIDIA(0): DPMS enabled
[ 19.798] Loading extension NV-CONTROL
[ 19.799] Loading extension XINERAMA
[ 19.799] (II) Loading sub module "dri2"
[ 19.799] (II) LoadModule: "dri2"
[ 19.799] (II) Module "dri2" already built-in
[ 19.799] (II) NVIDIA(0): [DRI2] Setup complete
[ 19.799] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 19.799] (--) RandR disabled
[ 19.817] (II) Initializing extension GLX
[ 20.522] (II) config/udev: Adding input device Power Button (/dev/input/event3)
only removed the input detection stuff
Question
How can I shift the display to the right?
Many thanks for any hints.
rale
Last edited by rale (2013-01-19 11:46:14)Mr.Elendig wrote:Switch to dvi/hdmi if you can. Else you have to play with screen calibration etc.
Thank You Mr.Elendig!
The simplest answer often is best. After I connected a TFT display, instead of my TV, I was able to calibrate the screen output and got the desktop shifted. Knowing that, I tried the settings of my TV again. There is a hard to find option for calibration wich is set to automatic but doesn't do it. Trying to turn it of did the trick. Even the option stays on automatic and even the display format is fixed to 4:3 instead of 16:9, finaly the TV adjusted the display correctly.
None the less, the problem not to be able to shift the desktop using the screen paramters in xorg.conf remains.
Thanks
rale -
How do I recover a window that has gone off the screen ?
The upper and right hand sides of my "Adobe Elements Organizer" application window have gone permanently off my Imac screen and try as I might, I can't drag or minimize this window to centre it on my desktop as a much smaller size and thereby recover control of it. The missing window top contains some commands I can't access and so does the missing right hand side of the application window. Have tried junking app prefs, turning off Spaces, starting and restarting the computer. Problem does not occur in other accounts using the same app - so something is screwed up with this app's window size defaults or settings or prefs in my user account only.
anyone have any suggestions?
Deleting all the "com.adobe.elements organizer.plist" files does NOT cure my problem. I suspect it has something to do with Mavericks' poorly tested 'multiple displays' feature -- that likely has some bugs in it. This app window seems to think it's on a much bigger monitor than my 21.5" Imac.' short of removing and reinstalling the app itself or getting a windows machine, I can think of nothing else to do.Not sure I follow what you mean: When I open Mission Control, the entire troubled application window is then (hurrah !!!) visible on the Mission Control "Overview" screen - but when I c\olick in that app and I am returned to the normal operating screen, it's all cut off again. It will not let me click and hold and then drag on its lower black border; I can only resize it in the direction that pushes it further off the screen.
This app's main window remains stubbornly frozen in position - up at, and extending right off of, the top right of my screen and it does not respond to normal dragging - normal attempts to pull it down and see the lower right corner so I can resize the window by dragging its corner inward diagonally.
Can you describe what you want me to try in different words. By invoking I assume you mean opening mission control. That I am doing and that's the only way I can see the whole window looming quite normal. But it won;t render for me that normal way on a normal operating screen. -
I will click on the browser to bring it up. Yet, whenever I do. It will seam to be appearing but also slide off the screen to make it un-visable. Firefox appears to work just fine except for I can't actually get on. I uninstalled the program and then re-installed it. But the issue persists.
This issue can be caused by the Babylon Toolbar 1.1.8 extension
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes -
Hi i am have had a lot of trouble emptying my trash. when i go to put something in there it asks from my password and the item goes off the screen, but this does not clear any space on the hard drive.
1. Triple-click the line below to select it:
~/.Trash
2. Right-click or control-click the highlighted line and select
Services ▹ Show Info
from the contextual menu. An Info dialog should open.
3. The dialog should show "You can read and write" in the Sharing & Permissions section. If that's not what it shows, click the padlock icon in the lower right corner of the window and enter your password when prompted. Use the plus- and minus-sign buttons to give yourself Read & Write access and "everyone" No Access. Delete any other entries in the access list.
4. In the General section, uncheck the box marked Locked if it's checked.
5. From the action menu (gear icon) at the bottom of the dialog, select Apply to enclosed items and confirm.
6. Close the Info window and test. -
Long paragraphs in incoming emails display as a single line, with the end of the paragraph running off the screen. I want to make it wrap automatically to fit the screen.
For the browser window, just drag it to the top left of the screen (click and hold on the top bar with the traffic lights to drag), then in the bottom right of the window you'll see a rectangle with diagonal hatching. Click and hold on that and drag the window to the size you want.
Clicking on the green dot at top left will expand the window to fit the screen, clicking it again will shrink it back to where it was (this doesn't work in Finder windows quite the same).
The menu bar size is set in the bowels of the OS, though there may be third-party applications which can alter it.
As it's size is relative to the screen resolution, you could try reducing the resolution in System Preferences > Displays to see if that would suit you better.
Maybe you are looking for
-
How long does it take and how should I learn...
Hi. First of all, sorry if this is in the wrong forum. I am new to web-design (as in brand-new xD) and wish to learn Dreamweaver. With Dreamweaver being such a big application, with so many different tools etc I decided it would be best if I learned
-
My Lumia 720 theme is not working after Amber upda...
Hi, Today I updated my Lumia 720 with amber update . I got all the new feature like Glance , color profile etc. but now theme color are is not working. On change of theme color, tiles color is not changing. Tiles are always in black color. I am also
-
Where can I get an update for creative suite 5.5?
Where can I get an update for Creative suite 5.5?
-
hai i am adding new infoobject to ods and cube,that have data already.how can i do.i want to delete the data both in ods and cube.if so how to delete the data in ods.
-
Jerky scrolling in web browsers
Mostly I'm using firefox/chrome for web browsing on a non-retina 2012 MBP. Since upgrading to mavericks, the scrolling has become extremely jerky, it looks like there's a tiny pause every time a picture moves from the offscreen buffer to the screen.