Ical alert to  run script disappears from the event

A few seconds after I set an  alert for an event  to run a script, the Run Script designation disappears and defaults to  alert Message. I cannot make the Run Script designation stick. So, when the alert triggers, no script is run. 

Hi kimal,
Are you syncing the calendars? Run Script alarms only work on local calendars, those under "On My Mac" in iCal.
Best wishes
John M

Similar Messages

  • Running iTunes 11.0.3 64bit Windows 7. The "join Tracks" line has disappeared from the box that opens when you click "options" after inserting a CD. Only 2 lines show up: "Get track names" and "Submit CD Track names". Where did "Join Tracks" go?

    Running iTunes 11.0.3 64bit Windows 7. The "join Tracks" line has disappeared from the box that opens when you click "options" after inserting a CD. Only 2 lines show up: "Get track names" and "Submit CD Track names". Where did "Join Tracks" go?

    i have the same problem no radio stations at all bit shabby hate technolgy now adays

  • My TPM has disappeared from the UEFI (Vaio SVD1321APXB running Windows 10).

    My TPM has disappeared from the UEFI (Vaio SVD1321APXB running Windows 10). It was working fine with bitlocker then I decided to do a reset so that I could use it for passport. First, I temporarily stopped bitlocker, then proceeded to reset the TPM wit TPM.msc. The procedure worked, but the TPM is now no longer accessible. If I go to the UEFI, it does not appear.I had the same issiue when I was running Windows 8.1, and running Vaio Care fixed the problem. Now, Vaio Care crashes on Windows 10. Would anyone have an idea on how I could reinstate the TPM? I am happy to do a fresh install on the machine if need be, but would need some pointer whether this is going to fix the problem.Thanks much!Pierre

     
    Hi PierreN,
    Thank you for visiting Sony Community! 
    I tried to search for a resolution on you issue but I just got an article on how to enable enable the Trusted Platform Module (TPM). Since TPM is not accessible anymore, what we suggest is to format the unit back to its original factory settings. 
    For further assistance regarding your concern, please contact the Sony offices/Sony representative offices nearest to your place of residence in Asia Pacific region http://www.sony-asia.com/countryselector.html?hpid=countryselector:AsiaPacific. Due to proximity, they are in a better position to respond to your questions or concerns.
    Regards,
    Vincent 
    If my post answers your question, please mark it as "Accept as Solution"
     

  • TS2198 ical (the calendar program) that came with this apple mac pc suddenly stopped working, then disappeared from the computer, from the desktop where I have been using it for the past two years, without trouble, then from the list of applications. . .

    ical (the calendar program) that came with this apple mac pc suddenly stopped working. When I pulled the icon from the desktop, it then disappeared from the computer.I have been using it from the desktop for the past two years, without trouble. It has uninstalled itself, without my intervention and has eradicated all traces of it, including all my entries from the computer memory. There is no program in the applications list. Can you say why this may have happened please?

    I opened one of the .calendar folders. There was a folder named Events which had either one or some files ending .ics. I opened several of these, which put up a dialogue window showing some parameters with data strings attached as follows :-
    BEGIN:VCALENDAR
    VERSION:2.0
    PRODID:-//Apple Inc.//iCal 4.0.4//EN
    CALSCALE:GREGORIAN
    BEGIN:VEVENT
    CREATED:20110824T070048Z
    UID:6AAAB8A2-64C7-4E88-8E5E-46A4D1036544
    DTEND;TZID=Europe/London:20110824T104500
    TRANSP:OPAQUE
    SUMMARY:Try to avoid general urticaria triggers such as stress\, alcohol
    \, aspirin\, hot baths\, rapid temperature changes\, tight clothing and
    junk or processed foods containing sulphur dioxide\, sodium benzoate\, s
    alicylate and tartrazine.\n\nAvoid tomatoes\, strawberries\, strong chee
    se\, dark fish and fermented foods.
    DTSTART;TZID=Europe/London:20110824T094500
    DTSTAMP:20110824T070102Z
    X-APPLE-EWS-BUSYSTATUS:BUSY
    SEQUENCE:2
    END:VEVENT
    END:VCALENDAR

  • How to keep clients from disappearing from the SCCM console

    I am running SCCM2012R2 in an environment with about 60 desktops as well as 8 laptops that are only occasionally connected to our internal network.
    I've noticed that some computers such as the laptops that are seldom on the network and desktops that have been sitting ready in a cabinet for several months have disappeared from the Devices list.
    I assume this is part of aging old clients out but I would like those clients to remain, possibly forever and then I can manually remove as needed.
    I assume the settings I need to change are in Monitoring->Client Status which are all set to the defaults.  Or do I just need to turn off something in Site Maintenance? Or both?
    Thanks

    Client Status Settings has a maximum of 30 days.
    You can max it out, but additionally, you also need to configure the Site Maintenance Tasks (there are
    a few - e.g. Delete Aged Discovery Data). Just check their purpose on technet.
    http://technet.microsoft.com/en-ca/library/e555d7e3-3681-440a-82d0-319d2b4bdd08#BKMK_PlanMaintenanceTasks
    *en-ca

  • Behaviors disappeared from the Inspector

    Motion 4 on a MacBookPro 2.66. Working a little more than an hour on titles. Set up four different Groups, each with 4 to 5 TEXT boxes each. Went back through to Animate the text, got the first box selected, go to the Library in the Inspector and I have (0) Behaviors. 5 mins earlier I had 230. Some folders show up partially filled, some are fine, some are as empty as Behaviors. Under the Behaviors Icon above the Canvas I have all the Behaviors but being kind of new to Motion I would like to see an example in the Inspector- beside they're supposed to be in the Inspector.
    Saved, Quit. Ran DIsk Utility and Repaired a page full of stuff, all in the Systems Library- Motion was the only thing I ran this morning, reopened Motion and the Behaviors where back in the Inspector.
    Didn't loose anything but it's still a little concerning.
    Had Motion running by it self because I can't seem to get the hang of swapping clips or Sequences back and forth between FCP successfully- not what this post is about, I'll get that figured out but am I doing something wrong to loose the Behaviors?
    I had 2 Backgrounds with Blurs on, not on top of each other, and the rest was just Text. One Text box had one word that was Live Fonts but the rest was just text I intend to Animate with Behaviors.
    Is this just the way it is with laptops?
    Got 500 Gigs in the MacBook, all of Motion is in it. I keep the Transferred or Captured source material for FCP on external disks but since I'm really learning Motion it's nice to have it all with me.
    Anybody have any ideas why folders would disappear from the Inspector?

    Anybody have any ideas why folders would disappear from the Inspector? < </div>
    None.
    Good news: it's not typical.
    Save early, save often.
    bogiesan

  • Can we run script logic at the time of preparing reports.

    Helo Everybody!
    I am new to SAP BPC.
    Can we run script logic at the time of preparing reports.
    Thanks & Regards,
    Satish.

    If you mean, "Can we run script logic at the time of preparing reports" is equivalent to entering data into the report and sending it to the database, then yes, you may run logic as Marcel indicates.  Defualt logic is ALWAYS run for ANY and EVERY set of data that is sent via an input template from the field.  You may also run logic when posting a jOURNAL entry as well.  But be careful....if default logic attempts to perform to MANY or COMPLEX calculations, the time it takes to complete the process may not be in expectations with the users plans.  There is a fine design balance required when planning to run logic at the time of input, as opposed to running in a package or at specific times during the day.
    Hope this helps.

  • Adobe Paper extension for PS CC has worked for many months.  Today it disappeared from the Extension menu.  I reinstalled and received a "successful reinstall" message but the extension does not appear any more.

    Why has the Adobe Paper extension for PS CC disappeared from the Extension menu?

    And, of course, as soon as it isn't 3am, I realise that it is because I haven't run the programs in the background. Oh dear...

  • Does anybody know if the ipad air 1 is using yosemite or something different? I don't know what type of safari i should install because it disappeared from the ipad. Thanks!

    Does anybody know if the ipad air 1 is using yosemite or something different? I don't know what type of safari i should install because it disappeared from the ipad. Thanks!

    YYosemite is a Mac OS and it doesn't run on an iPad. You cannot delete or install Safari on the iPad. It is on your device somewhere.
    Swipe from screen to screen to look for it.
    Check Settings>General>Restrictions and make sure that you didn't disable it.
    You can also reset the home screen layout and the icon will reappear - but the home screen will return to the way that it looked when you first activated your iPad. Settings>General>Reset>Reset Home Screen Layout.

  • Premier 8 has disappeared from the bundle!

    Hello I have always had Premier as part of my Elements package but for some reason after being installed (and used!) for the last 4 years it has disappeared!  I tried downloading Elements again yet Premier is still not installed.  All I have are remnants of files and a lot of videos I am now unable to play.

    Bumblebear
    What computer operating system was your Premiere Elements 8.0/8.0.1 running on?
    And what do you mean by "bundle" in the "Premier 8 has disappeared from the bundle!"
    If you do not see Premiere Elements 8 in the list of applications installed on your computer, then
    a. Do a run through of ccleaner on your computer
    https://www.piriform.com/ccleaner
    (regular cleaner and registry cleaner components)
    b. Reinstall Premiere Elements 8 (do you have any installation disc or are you working from installation files from an online download from Adobe). Do you have a purchased serial number for the product? Can you find your product and its serial number at Adobe?
    c. If this is an Adobe online purchase, have you gone to My Adobe and your account there to see what is happening?
    If so, have you contacted Adobe about this matter? And, if so, what was the outcome of that contact?
    You wrote
    All I have are remnants of files and a lot of videos I am now unable to play.
    I do not understand what that has to do with Premiere Elements (any version). Videos can be played on computer players. Are you using "videos" to mean project files (project.prel) from Premiere Elements 8.0/8.0.1? Please explain.
    Did you computer undergo any catastrophic events that coincided with the disappearance of Premiere Elements 8.0/8.0.1?
    More later.
    ATR

  • Running @Script.sql from inside C#

    I'm trying to include a script file as part of a deployment. I'm able to connect to my Oracle XE database in code and run stored procedures as well as text commands. My deployment will copy a script file into an install directory for later use. When the user activates history recording, I want to run this script file.
    I can run the script manually...@"C:\Program Files\History Setup\TestScript.sql"...without issue. Works just fine.
    Currently I recieve an invalid sql command error. At the moment I'm trying:
    Command.Connection = myconnection;
    Command.CommandText = @"@""C:\Program Files\History Setup\TestScript.sql""";
    Command.CommandType = CommandType.Text;
    try
    Connection.Open();
    Command.ExecuteNonQuerry;
    catch (Exception ex)
    error handling
    If anyone has advice for running script files from inside C#, it would be appreciated.

    The other Dennis is correct. You must cleanup the text.
    This should give you a start. I have had good results using the forward slash as a delimiter.
    r,
    dennis
    byte[] ba = GetFileContent("SomeFileName");
    string All_My_Statements = Encoding.UTF8.GetString(ba);
    ExecutScript(NetConnectionString, All_My_Statements);
            public void ExecuteScript(string _connectstring, string _final_statements)
                   string[] cmd_seq = _final_statements.Split(new char[] { '/' }, StringSplitOptions.RemoveEmptyEntries);
                for (int i = 0; i < cmd_seq.Length; i++)
                    string act_cmd = cmd_seq;
    string tmp = actcmd.Replace("\r\n", "");
    act_cmd = _tmp;
    if (act_cmd.Length > 2)
    try
    int r = ExecuteTextNonQuery(_connectstring, act_cmd);
    if (r == 1) // success
    LogThis("\tSuccess:" + act_cmd);
    else
    LogThis("\tExecuted:" + act_cmd);
    catch (OracleException) { LogThis("\tException:" + act_cmd); }
    catch (System.Exception) { LogThis("\tException:" + act_cmd); }
    public static byte[] GetFileContent(string f)
    byte[] ba = null;
    try
    System.IO.FileStream fs = new FileStream(f, FileMode.Open);
    System.IO.BinaryReader br = new BinaryReader(fs);
    ba = br.ReadBytes((int)fs.Length);
    br.Close();
    fs.Close();
    catch (System.Exception) { };
    return ba;
    public static int ExecuteTextNonQuery(string connectionString, string exec)
    int rtn_int = -1;
    using (OracleConnection oraconn = new OracleConnection(connectionString))
    string execcmd = exec;
    try
    _oraconn.Open();
    using (OracleCommand cmd = new OracleCommand(_execcmd, _oraconn))
    cmd.CommandType = CommandType.Text;
    rtn_int = cmd.ExecuteNonQuery();
    catch (OracleException _oraEx)
    throw (_oraEx); // Actually rethrow
    catch (System.Exception _sysEx)
    throw (_sysEx); // Actually rethrow
    finally
    if (_oraconn.State == ConnectionState.Broken || _oraconn.State == ConnectionState.Open)
    _oraconn.Close();
    } //using _conn
    return rtn_int;

  • RIB 13.2.x - Subscribers disappeared from the rib-rms-gui

    I am running into an issue with 2 environments so far, we installed RMS 13.2 with RIB 13.2 and when we first deployed the RIB we could see all the subscribers and publishers in the RIB_GUI screens.
    After a while and maybe after applying patches, not exactly sure when this start happening, the subscribers disappeared from the RIB-GUI but if you look at the log files the subscribers are still running, just not visible in the GUI tool.
    Any suggestions on how to get them back in the GUI?
    Thanks
    J

    Well, I can explain this if someone changed one of the main XML RIB files that define the list of relevant adapters.

  • Downloads just disappear from the specified location such as "Desktop" or "My Documents".They are untraceable afterwards.Why does this happen?And because of this I have uninstalled Firefox and now use Chrome.

    I have been using Firefox for almost a year now,and had upgraded to Version 7 recently.
    My problem started with the downloads.
    1) When a download is to be commenced,a box appears with two options,namely "SAVE" and "CANCEL".
    Even when I click on "SAVE",the the box shows it as 'cancelled'.When I right click on the box,another dialogue box appears with a number of choices ,the top one reads 'RETRY'.
    When I click this option the download starts and it is shown in the chosen location until 99% is completed,bu the moment the download is complete,the item i.e. the downloaded item just disappears from the chosen location and is not traceable thereafter.This has happened to me repeatedly over the past week or so and I am so disgusted that I have been compelled to uninstall Firefox,and have started using Chrome.
    Please help,as I would like to get back to using Firefox again but without the above problems.

    Understood.  However, the point that I'm trying to make is that it's not the WiFi access point's security that's in question, it's having your phone's WiFi in an always-on mode that's in question.  It's simple: if your phone's WiFi is on, then it is both discoverable and hackable... even when it's not connected to a WiFi network or access point.  Here's an article about a drone in London that was created to hack smartphone WiFi signals (and hackers have been doing what this drone does for years):
    http://money.cnn.com/2014/03/20/technology/security/drone-phone/
    The point is that it's not  secure to have your phone's WiFi in an always-on mode.  It would be better for privacy and security if Apple made WiFi location aware so that it is only enabled when you are at a trusted location (e.g. your home or office).  Or, at least give us the option of location aware WiFi so that each user can determine the best mode for their phone:
    (1) Always-On (current default - not secure and many privacy issues).
    (2) Trusted mode (only on at trusted locations).
    (3) Off.

  • HT3228 Why is it that when I delete an email message from an account on my iPhone it instantly disappears from the same email account on my wife's iPhone?

    Why is it that when I delete an email message from an account on my iPhone it instantly disappears from the same email account on my wife's iPhone? We both have iOS7 and have imap email accounts.

    not all mail providers sync the send mail part of the mail box
    you can try to contact yahoo if this is the case with them

  • When I click on the - fire fox disappears from the task bar; it is still open but gone from the task bar, if I click on any icon it opens a new Firefox window, I end up with several windows open but none on the task bar.

    Question
    When I click on the - to minimize fire fox, it does not close the window but the firefox icon disappears from the task bar; it is still open but gone from the task bar, if I click on any other icon it opens a new Firefox window, I end up with several windows open but none on the task bar.

    Boot the computer in Windows Safe Mode with network support (press F8 on the boot screen) as a test to see if that helps.
    Do a malware check with some malware scanning programs on the Windows computer.<br>
    Please scan with all programs because each program detects different malware.<br>
    All these programs have free versions.
    Make sure that you update each program to get the latest version of their databases before doing a scan.
    *Malwarebytes' Anti-Malware:<br>http://www.malwarebytes.org/mbam.php
    *AdwCleaner:<br>http://www.bleepingcomputer.com/download/adwcleaner/<br>http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
    *SuperAntispyware:<br>http://www.superantispyware.com/
    *Microsoft Safety Scanner:<br>http://www.microsoft.com/security/scanner/en-us/default.aspx
    *Windows Defender: Home Page:<br>http://www.microsoft.com/windows/products/winfamily/defender/default.mspx
    *Spybot Search & Destroy:<br>http://www.safer-networking.org/en/index.html
    *Kasperky Free Security Scan:<br>http://www.kaspersky.com/security-scan
    You can also do a check for a rootkit infection with TDSSKiller.
    *Anti-rootkit utility TDSSKiller:<br>http://support.kaspersky.com/5350?el=88446
    See also:
    *"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

Maybe you are looking for