ICal & Backup 3, Regardless of recovery date - still the same files?

I don't understand what is going on - and I may seem to have found a bug that crashes Back-up 3.1
My wife deleted my personal calendar in iCal. So - I went back into Backup and recovered all the data files from the day prior. Then the day prior to that, and so on and so on, only to find out whatever data I recover and replace - is still coming up with that day's files.
I am replacing the entire data file in the iCal folder located: USERNAME>LIBRARY>ICAL. I even replaced the preferences file located in USERNAME>PREFERENCES
No matter how far back I go - same Calendars.
Even if I delete all the Calendar data, empty trash and leave the whole folder of iCal data empty and launch iCal, the data files magically reappear before my eyes [as I watch the iCal data folder]. What the heck is going on? This is wierd.
I do not use the iCal back-up mode - but use BACKUP 3.1 and have the iCal option tagged for back-up.
Thanks for any help. Leo
I wish they could design a roll-back to one, two or three days.

Under Mac OS X 10.4
and later, iCal calendars are stored here:
Macintosh HD:Users:<username>:Library:Application
Support:iCal:Sources
Hi Michael. Yes - those are the files I have been trying to recover, and those are the files I have been replacing on my Mac. I have Mac OS 10.4.8. The above you mentioned are the exact files I have been trying to recover, overwrite, etc. I am successfully overwriting files with a Backup [of Apples Backup 3.1 version] and none of the recovered info get's shown. The old folder files in the sources folder, as I watch the folder contents after i reopen iCal, stay while all the newer folder files get written back into place. The newer files don't overwrite the older ones, they just reappear.

Similar Messages

How do I add new data to the same file in a State Machine?

Hello,
I have a State Machine, with a State where 3 samples of data are collected in a For Loop. I would like to save this data in a file and keep adding new data to the same file each time I get to this state. The problem I'm running into is that each time I reach this State, my old data in the Excel file gets replaced with the new data instead of being continuously added in the same file.
Ive tried Shift Registers but I may not be using them correctly since my file keeps displaying only 3 new data points.
Any ideas will be appreciated!
Thank you, so much.
-Peter

Where should I place these shift registers? Where should I place my File I/O VIs? Is it possible to use the Write to Spreadsheet File VI in this situation?
Ive attached a very simple example of the problem. Thank you.
Attachments:
StandardStateMachine 2.vi ‏16 KB

How can I save images and text data to the same file?

I have been looking at ways to do this for a while. My main VI saves the raw data to a text file which the users then import to Excel and plot. I am trying to simplify this process and have been looking at ways to accomplish this task. I want to be able to save the raw data to a file and then save the Labview graph as well. This will eliminate the tedious task of importing the raw data into Excel and plotting it. I can save the raw data to its own file and I can use the Get Image method for the graph and save it to its own file. I am currently using the .png format. Is there a way of saving both to the same file ie, importing the image into Excel or Word etc. Before I go off doing a science project I wanted to see if anyone else had experience completing this task and had any recommendations. Thanks in advance for any help.

well ther are a couple of ways. You could use the standard report generation VI's and make a complete report with the image of the graph embedded into the report with the raw data or you could use activeX and control excel thru LV and put the raw data into excel directly and have excel graph the data without any user interaction. I have posted a slew of VI's on the excel board if you do not have the report generation toolkit. If you could tell me which way you want to go I could possibly send you an example.
For more information and some sample VI's and tool kits, you can go to the excel board
Joe.
"NOTHING IS EVER EASY"

How can i save differnts data in the same file?

Hi all,
i need some help. I'm working on a project for students an th university. We have to devellop a programm for LEDs measurement so that all the measure data must be save in de same file. We have develloped the programm, but we have a big problem to save the measure in the same File.
When we do the first measure , the file must be created and the fisrt data gonna be save in this file that is correct
When wie do the second measure, the third .... measure, the programm ask us to comfirm the file or where we want save our data
We need some help, to know how we can change or devellop this programm so that, for the first measure , the file must be created and the fisrt data gonna be save in this file, the second measure the same file must be chose and from the third and more the measure data must be automatically save in this file without the programm ask to chose or to confirme a file?
I attach a part off this programmm
Thanks
Attachments:
SR830DSP19.vi ‏212 KB

Move the "File Dialog" where you open your new file out of the while loop. Only pass the refnum inside the loop.

How do i delete completely all data that i already deleted? Because even though i deleted the files and empty the trash, my memory is still the same! please help!!

Hi all! im using the OS XV10.6 not 4 sorry. Anywayz, i tried to delete all data that i dont need to have more free space. However, after i deleted all the files that i dont need, then empty the trash cane, my free space is still the same! I did research and try the "erase for free space" But it is still the same! please help!!! Is there anyway to increase my free space?

Hello, are you using Filevault perchance?
How much free space does it report if you do a Get Info on the whole drive?
Could we be confusing Memory (RAM), with Hard Drive Free Space (Virtual Memory)?

HT1414 Does Restoring backup from iTunes overwrite newer data on the iPhone?

Does Restoring backup from iTunes overwrite newer data on the iPhone?

Yes, if that new data hasn't been backed up yet.

My time capsule is full and when I attempt to back up, I only receive a preparing back up message and the earliest and most recent back up dates remain the same. Why are the oldest backups not being deleted to make room for the newest backups?

My time capsule is full and when I attempt to back up, I only receive a preparing back up message and the earliest and most recent back up dates remain the same. Why are the oldest backups not being deleted to make room for the newest backups?

linda mariefromharper woods wrote:
My time capsule is full and when I attempt to back up, I only receive a preparing back up message and the earliest and most recent back up dates remain the same. Why are the oldest backups not being deleted to make room for the newest backups?
It may be in the process of making room. What version of OSX are you on? (That process can be excruciatingly slow on Leopard or Snow Leopard backups over a network; Lion has improved it greatly.)
A clue may be lurking in your logs. Use the widget in #A1 of Time Machine - Troubleshooting to display the backup messages from your logs. That should help you figure out what's going on. If in doubt, copy and post them here (but if the same ones repeat over and over, drop most of the duplicates).
If you can, connect via Ethernet; it will be 2-3 times faster.

HT4085 Did all these things mentioned in this article, even did a system reset including data and other settings. iOS is up to date, still the iPad 2 display is not rotating.

Did all these things mentioned in this article, even did a system reset including erase data and other settings. iOS is up to date, still the iPad 2 display is not rotating.
This happened first a couple of weeks before, then I did a reset and it worked. Then after 2-3 days it happened again, I updated the iOS and it worked after that. Next time it happened, I tried all possible methods, including switching to software - rotation lock on/off. The hardware when turns to off/on, shows the correct icon on the screen of the lock and unlocked state. But the rotation is not happening.

Just check again.
If you see a lock icon in the upper right corner of the screen - then the screen orientation is locked.
Try the side switch above the volume rocker first and see if that unlocks the screen. If that doesn't do it, double tap the home button and swipe to the right and look for the lock icon all the way to the left.
If the screen is unlocked but still will not rotate, reset the iPad.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
If the iPad screen still will not rotate - turn it over and gently tap it on the back a couple of times - but gently tap it. Make sure that the screen is protected.

I tried to restore my new ipad in my itunes but it keeping restore it to my old ipad. I did delete also all my backups in the iTunes, still the same problem is showing??? please I need a huge help to have my new iPad as I bought it???

i tried to restore my new ipad in my itunes but it keeping restore it to my old ipad. I did delete also all my backups in the iTunes, still the same problem is showing??? please I need a huge help to have my new iPad as I bought it???

pleeeeeeeeeeeeeeeeeeeeeeese I need an URGENT help,,, someone answer me back

SSRS 2008 R2 - Dynamic header data stays the same when exporting

Background:
I have a SSRS 2008 R2 report with a single Tablix.
The data is grouped by InvoiceID, with each appearing on a separate page.
I'm displaying some of the detail data in the group header row using Expressions similar to the following:
="Invoice # " & ReportItems!InvoiceID.Value"
The data referred to by my ReportItems statements are all hidden in the detail row (Advanced Mode, the Hidden Value for the Static Row Group is set to false).
Problem:
When I Preview the report in Visual Studio, everything looks as it should - the dynamic header data changes correctly with each group.
However, whenever I export the results (I've tried all the formats), the header data is the same for every group - its taking the values from the first group and using it in all the groups.
I've copied the same expressions into my Totals row, and the data is correct when exported; its only happening in my header rows.
Any help in resolving this is greatly appreciated, thank you.

Hi Alex,
According to your description, you have a header with expression contains ReportItems. Now you find it shows incorrect result when exporting to a file. Right?
In Reporting Services, it has reported some similar issue that the ReportItem returns unexpected result when exporting. In this scenario, since you just want to show the group name in each page as a header for detail rows. So you can make the
detail rows group on the Group. Then delete the Group column but still keep the group. After that add a row above detail row (Out side of group) and put in "=Fields!InvoiceID.Value". Now it will show the corresponding Group name
when you set page break between each group instance. We have tested this case in our local environment. Here are screenshots for your reference:
Reference:
SSRS
field expressions using ReportItem refrences have unexpected results when exporting
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

Hi, My mac book pro starts lag, after shut down is still the same. Every application is taking 3-6 seconds to open, if I type something in Word letter appears only after 2 - 4 seconds, Whats going on and how to fix it ?

Very slow performance
Even after shutting it down and restarting still the same.
Laggin a lot
Please help!!!

First, back up all data immediately, as your boot drive might be failing.
A possible cause of a slow user interface is a large set of image or video files on the Desktop with preview icons. If you have more than a dozen or so such files, move them to another folder.
Another possible cause is iCloud activity, especially Photo Stream synchronization. If applicable, uncheck all boxes in the iCloud preference pane and see whether there's an improvement.
Otherwise take the steps below when you notice the slowdown.
Step 1
Launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
Select the CPU tab of the Activity Monitor window.
Select All Processes from the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
Next, select the Disk Activity tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in and Writes out.)
Step 2
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Select the 50 or so most recent entries in the log. Copy them (command-C) to the Clipboard. Paste (command-V) into a reply to this message. You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

Download error. Tap to retry. Why? I have a wifi and still the same message?

Download error. Tap to retry.... Why? I have a wifi connection and still the same message, and even connected to desktop the same for ipad. Help :-)

I'm getitng the same thing. I'm beyond sick of this iPad. It's a third generation Retina Display and it turned into a pile of cat turds after iOS 7. It got so bad I restored it and used iCloud. It was still god awful. I restored it and didnt use the iCloud backup and hoped that whatever was wrong would be avoided....nope. IF I can get a download going it nearly kills my entire iPad. I will open the cover and wait over 30 seconds just for the screen to light up. I will hit the home button to close an app and wait nearly a minute in some cases for it to actually close. Then to top off all the annoyances it just fails and loops over and over.
I bought Apple products to avoid stuff like this. Very unhappy.

Still the same bugs?! (Ovi Maps, N8)

Hi!
I'm using Ovi maps lately quite a lot but I have some problems with this software, especially with the usability. When searching the net for bugfixes/help I found an older bug report on Nokia BetaLabs: http://betalabs.nokia.com/apps/ovi-maps-for-mobile-v3-06/bugreport/23781/top-10-bugs-in-ovi-maps-v-3... and my problems are still the same but Ovi Suite says that I have the latest version (v3.06, Map version 0.2.42.122 on N8-00)
My problems are:
1.) When searching for an accurate address (Street name, No., ZIP, City name) there is no hit for offline navigation, Ovi maps needs an online search. If I leave the house number out the offline navigation finds the street - Why aren't there the house numbers stored for offline navigation? There is mostly no sense in only finding a street but not the accurate address. As long as I only use the navigation inland that isn't a big problem as I have internet connection included in my phone rate - but it's a problem abroad because of high roaming rates ...
2.) So I have always internet connection on Ovi maps - problem is that sometimes when the UMTS-connection is lost (e.g.. in tunnels) there is a pop-up if I want Ovi maps to connect to the internet. If I choose "Yes" there is some seconds later a new pop-up where I need to choose the connection - That's very annoying! I can't find a setting like "always allow Ovi maps to connect to the internet". There is only a setting if I only want offline navigation (which doesn't work, see 1.).
3.) If there is more than one result I can't figure out what is the difference between the results (except the distance) because the exact address isn't scrolling and the results are only like "Country, State, ...." - I don't see the differences because there is only "...".
4.) I can't scroll through the map once the navigation has started. There is only this mode where I can scroll threw the turns/junctions. Sometimes I like to see where the navigation takes me before I start driving, that is hardly possible without a 'free-map-scroll-mode'.
One last point is the search-process: It is more comfortable to have a step-by-step search for the destination like all major satnavs have (TomTom, Garmin, ...) and bigger on-screen-keyboard because with this tiny letters it is quite impossible to add/change the address while driving.

AUTxRemoteC wrote:Now to the points from my first post:
1.) I've downloaded the maps via Ovi Suite on my mobile. Internet connection is only used for the search, but not everytime, it's only some kB but abroad some kB could be very expensive ;-)
2.) Thanks for this hint but everything was/is configured right as you said. This is more or less a general problem of my phone, maybe it has also something to do with my provider. Not only Maps asks regularly for the connection to use, other applications like the AR-Apps Wikitude and LiveView (from BetaLabs) but also some games are doing the same.
1. Maybe I misunderstand your question but I have no problem with searches right down to numbers in streets with the phone offline i.e the country, town, street, street number is found and the cursor sits over that exact address on the map. Perhaps it is a problem with your country's maps? In the countries I use the geo data is readily available right down to the individually surveyed plots of land in towns and cities (and hence to numbers in streets).
I often find it quicker to do a search for the country first if it is another country you are searching for the address in, then do the city, street number and name search.
2. I suspect that you have not barred such connections somewhere in the set up of your phone generally or else for for some app, or perhaps, as you have games, etc loaded, one or more of them insists on "phoning home" as some do and as they have opened a connection Maps asks to use it.
That with Maps 3.08 on an N8 but I do not recall any problems on earlier versions either.

HT1212 itunes error 0XE8000068 tried re install itunes still the same. laptop is brand new w windows 8

I bought a brand new laptop with windows 8 for OS. Downloaded & installed itunes but gives me error 0XE8000068 when I attached my iphone 5. windows is up to date. as well as iphone 5. Tried changing cables & restarting laptop, still the same. Uninstalled itunes & reinstalled again but nothing changed. Still the same error.
How can I fix this???

Something here might be able to help you: http://support.apple.com/kb/TS3221

Dont want to have 2 PR if the delivery date is the same in MD04

Hi Guys,
I want to avoid the splitting of a PR .
Example:
Demand of 100 on the 10/08/2011.=> Req of 100 created when MRP runs.
The next week the demand changes to 50 on the 14/08/2011 and 50 on the 10/08/2011. Because of the lead time the delivery still the same so In an ideal world we would still have one Req.
But for some reason, SAP is creating 2 different REQ for the same delivery date !
How can we avoid that?
Thanks in advance.
Julien
Edited by: julien poncheele on Aug 22, 2011 7:55 AM

Hi Zafar,
Thanks for your contribution.
My bad I have not stated clearly my probl;em.
I agree that if the Requirement date is the same ( e.g ; 1 coming from safety and one from ad hoc demand) I agree that EX will enable the creation of one single PR.
But as soon as I move the ad oc demand to the next days, MRP will generate a separate PR (with still same delivery date)
That what I am getting
Receip/Req     Avail Qty
23.08.2011     Stock -
0
23.08.2011     SafeSt     Safety Stock----
4-
24.08.2011     Promo     LSF   -
70-
08.09.2011     PurRqs     0035741920/00010     23.08.2011-30--
10
08.09.2011     PurRqs     0035741921/00010     24.08.2011-30--
70
Since PR 35741920 and 35741921 has same delivery date I want actually to have them on the same PR.
Regards
Julien
Edited by: julien poncheele on Aug 23, 2011 6:44 AM
Edited by: julien poncheele on Aug 23, 2011 7:50 AM
Edited by: julien poncheele on Aug 23, 2011 7:52 AM

ICal & Backup 3, Regardless of recovery date - still the same files?

Similar Messages

Maybe you are looking for