ICal birthday calendar from Tiger missing after upgrade

Hi,
I recently upgraded from Tiger to 10.6.7 Leopard.  I noticed that iCal did not import my Birthday's calendar that I had manually created in Tiger.  None of my birthdays show up except for one when I select "show birthday calendar" in iCal preferences.  I have done the following:
Removed from Leopard and replaced with my Tiger data the following:
com.apple.iCal.AlarmScheduler.plist
com.apple.iCal.helper.plist
com.apple.iCal.plist
I have also removed the iCal folder in the Application Support folder in my Library.  After I did this I reopened iCal.
That didn't work so I tried removing the Calendars folder from my Library and reopened iCal to no avail.
I also rebooted into Tiger on my external to verify that the missing "birthday' calendar is still there, and it is.
I tried backing it up when I was in Tiger, than rebooting in Leopard and tried importing the backup to no avail also.
Any other suggestions?
Edit:  The calendar that I had created "Birthdays" does show up under "On my Mac", but the actual birthdays are nowhere to be found.

The birthdays for the iCal birthday calendar are taken from your address book
You will need to have one contact page and one birthday in your address book for each person.
Otherwise enter the names onto the correct dates in iCal and set them to repeat each year which is what I have done. I run couples and families in my address book.. Most of the Grandkids don't have their own pages

Similar Messages

  • Mini calendar in mail missing after Lion installation

    mini calendar in mail missing after Lion installation

    >After installing Lion (intel I-Mac 2g ram). My Microsoft Office 2004 no longer runs.
    Upgrade to a Universal compatible version of Office or equivalent.  http://www.neooffice.org/ is the least expensive alternative, though importing Entourage into iCal, Mac OS X Mail, and Addressbook works best if the data was exported from Entourage while still in Snow Leopard.
    >Also, when I select "printer friendly" pages in Safari or Firefox, I get a "missing plugin" message.
    When you upgraded, did you make sure that Safari was installed in the Applications folder?  If not, you may have to redownload Safari from http://www.apple.com/safari/ as it happens to be the same version.  Firefox double check is already Lion compatible.  For more on upgrading to Lion, see my FAQ*:
    http://www.macmaps.com/upgradefaq.html#LION

  • IMovie can't see my photos from iPhoto anymore after upgrade.

    Can anyone help with allowing iMovie to see my photos I have imported previously from iphoto?
    After upgrading to the new iMovie i have alot of photos in the project saying 'Missing file, try importing original source media.
    They were once all there in a finished project but now are gone.
    Any help is appreciated
    Thanks

    After I import my photos from my phone to iphoto, i always move my pictures to a folder i made in my documents
    You realise that this is just wasting space, right?

  • Top menu bar is missing after upgrading to yosemite

    Top menu bar is missing after upgrading to yosemite

    The Library file  has been hidden for some time now. So not surprised you are confused upgrading from Snow leopard.
    The easiest way to view this folder is to use the Go menu and press the alt key. This exposes the folder in the list.
    Hope this helps.
    PJRS

  • How do I remove MobileMe from iPhone Mailboxes after upgrading to iCloud.

    How do I remove MobileMe from iPhone Mailboxes after upgrading to iCloud. I now have both a MobileMe and iCloud mailbox in Mail in iOS5, but in Mail,Contacts, Calendars there is no MobileMe account to delete!

    check this https://discussions.apple.com/message/16371039#16371039

  • I'm unable to write/burn a CD-R (Verbatim) from a playlist after upgrading to iTunes 12.0.1.26. I get error 4000. I can however write/burn a CD from Windows Explorer and CDBurnerXP v4.5.4.5143 – which implies the device is working OK

    I’m unable to write/burn a CD-R (Verbatim) from a playlist after upgrading to iTunes 12.0.1.26. I get error 4000. I can however write/burn a CD from Windows Explorer and CDBurnerXP v4.5.4.5143 – which implies the device is working OK – and only fails when I write from iTunes.  The drivers are up to date
    Microsoft Windows 7 x64 Business Edition Service Pack 1 (Build 7601)
    Dell Inc. Latitude E6420
    iTunes 12.0.1.26
    QuickTime 7.7.6
    FairPlay 2.7.39
    Apple Application Support 3.1
    iPod Updater Library 12.0
    CD Driver 2.2.3.0
    CD Driver DLL 2.1.3.1
    Apple Mobile Device 8.0.5.6
    Apple Mobile Device Driver 1.65.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 3.06.0.2770
    Gracenote MusicID 3.06.0.2770
    Gracenote Submit 3.06.0.2770
    Gracenote DSP 3.06.0.2770
    iTunes Serial Number 756D13C00C3583C8
    Current user is not an administrator.
    The current local date and time is 2015-01-13 14:47:35.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is supported.
    Core Media is supported.
    Video Display Information
    Intel Corporation, Intel(R) HD Graphics Family
    **** External Plug-ins Information ****
    No external plug-ins installed.
    iPodService 12.0.1.26 (x64) is currently running.
    iTunesHelper 12.0.1.26 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    **** CD/DVD Drive Tests ****
    LowerFilters: SbCeCd (3.2.6.3),
    UpperFilters: GEARAspiWDM (2.2.3.0),
    F: HL-DT-ST DVD+-RW GU40N, Rev A103
    Drive is empty.
    The last failed audio CD burn had error code 4000(0x00000fa0). It happened on drive F: HL-DT-ST DVD+-RW GU40N on CDR media at speed 24X.
    F: HL-DT-ST DVD+-RW GU40N, Rev A103
    Audio CD in drive.
    Failed Reading table of contents, error 4000.
    Check the website of your computer or drive manufacturer to verify that you have the latest firmware for your CD / DVD drive.
    Audio CD reading failed. Error Code:   87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87.
    iTunes cannot play or import music from a CD in this drive. The drive may need a firmware update. Check with the manufacturer.
    Get drive speed failed. Error Code: 4000.
    The last failed audio CD burn had error code 4000(0x00000fa0). It happened on drive F: HL-DT-ST DVD+-RW GU40N on CDR media at speed 24X.

    Hi iTunes-1,
    Welcome to the Support Communities!  The error message you posted indicates a possible firmware update is needed for iTunes for Windows to work with your CD drive.  
    iTunes for Windows: Updating the firmware on your CD or DVD drive - Apple Support
    http://support.apple.com/en-us/HT201852
    Having outdated firmware can cause issues using CDs and DVDs with iTunes for Windows. Firmware is a type of software stored in a chip in hardware that can sometimes be updated.Identifying drives and firmware versions
    To run CD Diagnostics, follow the steps in this document.
    After following the steps to run CD Diagnostics linked above, look at section three to find out more about your optical drive(s).
    Here is an example of what section three might look like:
    In this example there are two drives. Drive E is a Samsung DVD-ROM drive with a model designation of SD-616 that has firmware version F000. Drive F is an NEC drive with a model designation of NR-7900A that has firmware version 1.08.Updating the firmware
    If the optical drive you are using came with your computer, check with the support site for your computer for a firmware update. Typically you will need to go to the support website for the computer maker and click on a "downloads" or "updates" link, and then enter your computer model designation and operating system version to see what updates are available. Then look through the available updates for a firmware update for your optical drive. Download the updater and run it. If you need assistance applying the update, contact the maker of your computer.
    If the optical drive you are using came as a separate part (was not included with a computer), check the support site for the drive maker for a firmware update. Sometimes the manufacturer is not clear in the CD Diagnostics results. In that case, you may just have to search the Internet for the drive model designation. You can usually find out who made the drive by looking through the results of such a search. Once you have identified who made your drive, go to the support website for that company. Look for a "downloads" or "updates" link, and then enter your optical drive model designation. Download the updater and run it. If you need assistance applying the update, contact the maker of the optical drive.Verifying that the firmware was updated
    Run CD Diagnostics again.
    Examine the CD Diagnostics results. The firmware version for the drive should be the new version.
    Information about products not manufactured by Apple, or independent websites not controlled or tested by Apple, is provided without recommendation or endorsement. Apple assumes no responsibility with regard to the selection, performance, or use of third-party websites or products. Apple makes no representations regarding third-party website accuracy or reliability. Risks are inherent in the use of the Internet. Contact the vendor for additional information.
    Last Modified: Nov 8, 2014
    Also, you mentioned that you have been successful burning a CD with the Windows OS.  Make sure that you have closed all software programs that can access the CD burner so that there isn't a conflict for the drive.   Sometimes chaning the burn speed from "maximum" to 8x can also help in this situation.
    I hope this information helps ...
    - Judy

  • TS3161 iWeb 'disappeared' from my iMac after upgrading to OS X10.8 - any ideas? tkx

    iWeb 'disappeared' from my iMac after upgrading to OS X10.8 - any ideas? tkx

    Did you do an erase and install of Mt Lion? In any case you'll have to reinstall iWeb from its original source.  Did iWeb come with your computer?  If so you should have a couple of disks that came with your Mac and one of them will have the Bundled Software Install package on it.  Like one of these:
    Be sure to update iWeb to the latest and last version, 3.0.4, from Apple Downloads web page.
    OT

  • BB App World Icon Missing After Upgrading to OS 4.0.0.65

    Hi,
    i'm using blackberry bold 9780.
    after upgrading to OS 4.0.0.65 my BB app world was missing. i have tried to reboot and re-install the app world but it doesn't work...
    appreciate that someone can resolve this..
    Solved!
    Go to Solution.

    Hi liedia
    Welcome to BlackBerry Support Forums
    Try this Knowledge Base :
    KB29422  BlackBerry App World icon is missing after upgrading to BlackBerry App World 4.0.0.63 to 4.0.0.65
    In addition who is your Carrier ? please edit your profile and remove your mobile number .
    Click " Like " if you want to Thank someone.
    If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

  • Lost you tube from home screen after upgrading to os6?

    I've lost you tube from home screen after upgrading iPad software. Is this normal?

    Sorry, no YouTube in IOS 6.
    You can use the iPhone version of YouTube or Jasmine
    http://itunes.apple.com/sg/app/youtube/id544007664?mt=8
    https://itunes.apple.com/sg/app/jasmine-youtube-client/id554937050?mt=8

  • I lost my stored contact from my iphone after upgrading ios 6

    i lost my stored contact from my iphone after upgrading ios 6

    I've had the same issue. I forgot how i resolved it but i think it has something to do with iCloud and sync in your contacts.

  • HT2513 Had to import Birthdays from yahoo calendar. Is there any way to move them to the iCal Birthdays calendar without manually inputing them each into Address Book?

    I used to use Yahoo Calendar to manage my birthdays and notifications of them. Yahoo screwed with something, so now I no longer get birthday notification texts to my cell. Now, I've imported my Yahoo Calendar dates in to iCal. iCal has a Birthdays "subscription" calendar which only shows birthdays entered into the Address Book. I do not have any birthdays entered into Address Book. Is there any way to select birthday entries from my other calendars and move them to the birthdays tab, or must I manually enter over 200 birthdays into Address Book?
    While I'm here, is there any way to highlight specific calendar entries and move them to a "new calendar"?
    THanks in advance for any and all help.
    -BKTru

    looks like this is not yet an option via yahoo/sbc

  • Birthday calendar from ical to icloud

    how do i get my birthday calendar on ical to appear on icloud??

    If you mean Google calendar, watch this video: http://www.youtube.com/watch?feature=player_embedded&v=gvFiKn_guEw.

  • Mini Bridge Missing from InDesign CS6 after Upgrade to InDesign Version 8.1

    I discussed this same problem https://forums.adobe.com/message/5833991 after upgrading to the prior version 8.0.2 of InDesign.
    After upgrading to InDesign Version 8.1, Mini Bridge no longer works.  Mini Bridge does not show under the Window menu and shift-clicking the Bridge icon opens the full Bridge, not Mini Bridge.
    With the prior version 8.0.2 problem, I was able to recover Mini Bridge by doing a re-install of InDesign under Window's Safe Mode.  Microsoft has somehow changed Safe Mode and I can no longer do the reinstall using Safe Mode.  I have tried several different ways of reinstalling version 8.1, but none of them correct this problem.  Still no Mini Bridge.
    Mini Bridge does work in Photoshop CS6 with no problem.
    I have read through all of the messages that seem to relate to this problem in this forum, but none of the suggested solutions work for me.
    Can anyone provide me with an answer?  If not, how do I get help from Adobe?  I am willing to pay for support, if necessary.

    RESOLVED - I can't believe it, but I have actually figured this out.
    Getting frustrated with going in circles, I decided to dig into security options.  First off, I opened Windows' Properties for the start-up icon for InDesign.  Right off, I noticed under the Compatibility tab that InDesign was set to run in Compatibility Mode for Windows XP (Service Pack 3).  This did not seem right, so I turned off the option to run in Compatibility Mode and re-started up InDesign.  Low and behold, the option Window | Mini Bridge was now displayed!  And it worked!
    Sorry to have bothered you gentlemen with this problem.  I really appreciate your assistance!
    Mark.

  • Exchange Calendar availability not working after upgrading to Mountain Lion

    After upgrading to Mountain Lion cannot longer see calendar availability on my Exchange account, before upgrading it worked ok - anyone has the same problem?

    Had the same problem on 2 Macs (iMac and MBP) after downloading ML last night, could not access my Exchange calendar via iCal. Deleted the accounts from iCal, then reloaded them, now all seems to work

  • Access Sequence JEXC missing after upgrade to EHP7

    Dear Experts,
    we are facing an error while saving excise invoice through transaction J1IIN in development system after upgrade to EHP 7, Access sequence JEXC missing  ( ) Message no. VE306, could you please suggest to find out solution.
    Regards,
    Amit Anasane

    Dear All,
    Thanks for helping with your valuable suggestions, finally i got solution of it,
    The root cause of this problem was the change in the table T682I by theEHP7 upgrade.The fields KOTABNR has been changed from NUMC(3) to CHAR(3).With NUMC type the wrong statement works anyway.With CHAR type it retrieves no records. thus creating this error message, so it was a pure ABAP programming error. i am closing this discussion once again thanks to all.
    Regards,
    Amit Anasane

Maybe you are looking for

  • Personal Apple ID on my work iPad - how to keep things private when others use it.

    I have a company iPad, we do not have corporate accounts, so I use my Apple ID to log in, make purchases, etc. I also have several apps that, by nature, are both personal and business (LinkedIn, etc). However, sometimes other employees need to use th

  • K8N Neo DVD drive issues

    I am having problems getting my liteon 811s dvd drive to work on my MSI K8N neo. Im pretty sure the problem is the motherboard. I did have the drive working for a while but one day it stopped working. It will show a cd and you can get into the folder

  • J2ee server not running

    Hi all, I am using EP6 here. My J2ee server is not running. Dispatcher and SDM for that instance are running but not the J2ee server. I m getting below pasted error in std_server0 file com.sap.security.core.persistence [SAPEngine_System_Thread[impl:5

  • Parallel Port Programming

    After series of trials and searching the forum i was able to get the commapi and install it. i want to design a simple program that can control circuits (i.e to on leds) . the problem is how to write a 1 or 0 bit to a particular pin. i saw different

  • Aperture cannot import iPhone 3G screen captures

    I have no problem importing regular pictures from the iPhone camera roll into Aperture. All software is the latest version. However I cannot import screen captures from the iPhone. In Aperture's import window, there is a dotted line in a square shape