Ical bug on ipad application exits if I select 1 year ahead
Anyone else get this.
If I open the calender app on ipad 3 and select Mar 2013 the application just exits. - May be a bug with the same month one year ahead (Works ok if I select a different month) or just doesnt like Mar 2013
Not a bug in the app per se. Works fine for me.
You might consider doing a reset before any additional troubleshooting. Hold the ON and HOME buttons simultaneously until the iPad shuts down. Ignore the off slider if it appears. Takes about 10 - 15 seconds, and will restart on its own.
Similar Messages
-
Get Rid of 'Would You Like to make iCal Your default calendar application'
Since installing the Plaxo 'helper' / Pref Pane - I now get the following message every time I launch iCal (and Address Book) ...
'Would you like to make iCal your default calendar application?'
Even when selecting 'Make Default' it still asks the next time. Is there a setting in com.apple.ical.plist (or similar) that controls this that I can look at, or is there a terminal command to try setting this another way?
I'm bothered a) why I get this at all - suspect Plaxo b) why I can't just set this the once. Any help gratefully received.
If it is Plaxo monitoring and then setting/changing a flag on the fly it's soon going to be heading for the trash....OK, here I am answering my own question... It turns out there's another Discussion which has the following solution:
I had the same message pop-up. I quite iCal and then went to ~/Library/Preferences and trashed the apple.ical preference [plist]. After that, I re-launched iCal and checked the box in the message box and it took that time.
I tried this... we'll see if it works for me. -
After downloading iTunes 11, my calendar on my iMac (OS X 10.6.8) does not sync with iCal on my iPad 2. Why is this?
Ok, here's what seems to have worked....but will need to monitor to see if this stays "stable".
1) As suggested by King_Penguin in another Discussion thread [apple support > iPad > Using iPad > Discussions] (https://discussions.apple.com/message/15911962#15911962), I turned off iPhoto startup on the iPhone. Then ejected iPhone from USB.
2) Reconnected iPhone via USB. iTunes did not start up. Started up iTunes manually. Went to Summary page for iPhone, unchecked the "open iTunes" option, selected APPLY button. Let iTunes run its application process.
3) Then checked the "open iTunes" option. Selected APPLY button. Got a dialog box asking if I wanted "iTunes Helper" to be installed; selected YES. Let iTunes run its application process. Ejected iPhone. Closed out iTunes. Reconnected iPhone via USB. AND iTunes STARTED UP AUTOMATICALLY (yay!). Let iTunes do some backup and sync'ing. Ejected iPhone. Closed out iTunes.
4) Connected iPad via USB (on computer). AND iTunes STARTED UP AUTOMATICALLY (yay!).
I don't know for sure that the iPhoto "automatic launch" was causing the interference, but it seems like the "uncheck/check" the "open iTunes" option seemed to re-set the problem that I encountered. I don't want to say for sure that this issue is fixed, but it appears to be under control for the moment.
Thanks to everyone for your thoughts and assistance. Maybe this info will help someone else out now that it's in the forums/discussions. -
How can I view to-do-list from my Mobileme ical in my Ipad?
I can not view in the ical in my iPad the to-do-list from my Mobileme ical.
Where is the to-do-list in the iCal in the iPad?
ThanksHi,
I don't believe you can get your iCal todos on the Calendar application on the iPad. This question is more relevant in the iPad forum. I suggest you also post it there.
Best wishes
John M -
How to see the To do List on the iCal in the iPad
Hi! Does anyone know how to see the To do List on the iCal in the iPad?
I've bought some applications from Itunes (Bento, Iwork..) and none of them allow me to see my calendar and the To do list on the same screen
Thanks!!I assume iPad is in the same boat as the iPhone, which has been discussed here:
http://discussions.apple.com/thread.jspa?threadID=1936638
In short, you can't. -
Hi all
I've got a error msg when try to generate a report using Cisco history report tool:
Error | An Exceptional Error occurred. Application exiting. Check the log file for error 5022
It only happens when choose report template: ICD_Contact_Service_Queue_Activity_by_CSQ_en_us.
User tried samething on other PC, it working fine.
only on user' own PC and only choose this report, error appears.
user runing windows 7 and do not have crystal report installed
tried reinstalled the software, doesn't work.
also tried this: (https://cisco-support.hosted.jivesoftware.com/thread/2041254) - doesn't work
then tried https://supportforums.cisco.com/docs/DOC-6209 - doesn't work
attached the log file.
thanks.wenqianyu wrote:From the log file:Looks like you get a Login Window.Error message showed up after username/password be enteredThere is an error in the log: Error happened in comparing UCCX version and HRC versionYou may need to do a clean uninstall, download the Historical report from the server, and install it again on the PC.Does this only happen to one PC or to every PC with this application?Wenqian
I have completely uninstalled the HRC, and download from server install again -- still doesn't work with exactly same error.
this matter only happens on this PC, when user try same thing on other PC, it works.
so i think it not relate to server or account. -
I want to cut and paste iCal entries on iPad. Have seen a number of questions raised but no definitive answer - is it possible or not?
(I use Bento but that doesn't sync with ICal now so can use that solution)
Hope to hear helpful news soon....
CNo, the camera connection kit only supports the copying of photos and videos to the Photos app, it doesn't support copying content off the iPad. For your second camera instead of the SD reader part of the kit, does the iPad to camera cable not work with it for direct transfer to the iPad ?
For Lightroom and Nikon software again no - you can only install apps that are available in the iTunes app store on your computer and the App Store app on the iPad, 'normal' PC and Mac (OS X) software are not compatible with the iPad (iOS). There are some apps that perform fairly basic editing functions that are available in the store, but nothing as sophisticated as, for example, Lightroom. -
Can you set the type of alert in iCal on the iPad?
I have an iPad (1st generation) with the latest iOS5. I love the new iOS and especially the way that iCloud makes things more seamless between my devices. I do have an issue with iCal, however. When I set an event in iCal in OSX, I can set the alert to be a message, message with sound, email, etc. By default, if I set an event in iCal on my iPad the alert is a message. I can find no way to change this. If there is a way, please tell me.
Because of this, I never use iCal on iPad to set alerts because I like to use message with sound. This greatly reduces the functionality of iCal on iPad because, for me, it can only be used as a calendar event viewer. Any help would be appreciated. Note: I have contacted apple feedback about this issue.
In a related, but less important issue, I find that the settings for the timing of the alert are very limited in iCal on iPad. On iCal in OSX one can set the alert time for either the time of the event, or pretty much any amount of time prior to the event. On the iPad, iCal will only let you set it to the day of the event, 1 or 2 days before, or 1 week before the event. A limitation, but not crippling. However, if anyone knows how to set the timing of the event on iPad's iCal with more specificity I would really like to know.
Thanks!Under Settings, Sounds, you can set an alert sound for calendar events.
For timed events, you can set the alert for a range of times from 5 minutes before upwards (e.g.15 mins, 30 mins, 1 hour). For all-day events, the range is as you described.
You can set the alert for each event as you create it (or edit it later)
You can set default alerts for all-day event,s timed events, and birthdays (i.e. different defaults for each type) in Settings, Mail, Contacts and Calendar, default Alerts.
Does that help? -
I primarily use week view on iCal, but sometimes i switch to month view for a larger perspective. Often, i use month view to check for any leftover events from the previous month in case i forgot to delete one or two.
I just found a bug concerning this. If i click on "month" today, it'll take me to the month view for june 2011, and from there i can navigate forwards or backwards. However, may 2011 seems to have a bug. If i click on < from june, it does nothing; if i click again, it takes me to april 2011. Similarly, if i click on > from april it does nothing and if i click again it takes me to june.
It doesn't end there. The june/may thing happens only when the selected day (the one shaded light grey on the month and week views and bright blue on the little month tab on the left) is after 04 june. If a day from the first week of june (i have my weeks start on sunday) is selected, the < button does take me to may, but several events which i deleted a long time ago are showing up.
Now, i have an event set for today (04 june). Since the first four days of june are in the same week as the last three of may, the month view for may shows these four days, as any normal calendar app would.
If i use the month tab to the left to navigate, i can access may 2011 by selecting any day on that month. However, iCal's behaviour depends on which day was selected previously. If the previous day was in april 2011 or earlier, iCal will show the month of may completely empty, which is great because i have no leftover appointments from may; however, the box for 04 june is also empty, which it shouldn't be. If the previous day was in june 2011, it'll show may with a repeating event on every sunday except the first, which is completely absurd, since i have deleted this event (and why isn't it showing on the first sunday in may?); the box for 04 june, however, will correctly show the event i have set for this day. If the previous day was in july 2011 or later, it'll show may with the repeating event on all sundays (including the first one) and it won't show anything on the box for 04 june.
Obviously, there is a bug with may 2011.
In case it helps, i do have a repeating event set to all sundays until the end of existence, but i have deleted all the entries from may and previously, since they have obviously already happened. Also, i had many other repeating events set to happen on different weekdays; these are to repeat themselves weekly until about halfway through june, and they started on april or may (can't remember right now). Like the sunday one, i have deleted all the entries from may because they have already taken place. Strangely (and thankfully), none of these appear when i visit may from june or later, as does the sunday event.
Any help would be greatly appreciated. Or am i forever stuck with week view, which has so far proven to be bug-free?
(I did a search on Google and another on the Apple forums for this issue but could find nothing, so i decided to ask the question myself. I apologise if somebody has already asked this question and i just couldn't find it.)Greetings,
I have a vague recollection of someone else with this issue but haven't experienced it myself nor encountered it recently.
Troubleshooting:
1.) First make an iCal backup: http://support.apple.com/kb/HT2966.
2.) Remove the following to the trash and restart your computer:
Home > Library > Caches > com.apple.ical and / or "ical"
Home > Library > Calendars > Calendar Cache, Cache, Cache 1, 2, 3, etc. (Do not remove Sync Cache or Theme Cache)
Home > Library > Preferences > com.apple.ical (There may be more than one of these. Remove them all.)
__NOTE: Removing these files will remove any shared (CalDAV) calendars you may have access to. You will have to re-add those calendars to iCal > Preferences > Accounts.
Once the computer is back up and running open iCal and test.
Hope that helps! -
Can I create a new calendar in ICal on my iPad?
Can I create a new calendar in ICal on my IPad?
Tap and hold a file. When it starts to shake, drag it on top of another file. This will create your folder. By the way, you can't create any nested folders (folders inside of folders).
-
Subscribing in iCal on my iPad to someone else's Google calendar.
How do I subscribe to someone's Google calendar in iCal for my iPad?
Photos can be transferred to an iPad via the iTunes sync process from a single computer only. When transferring photos from another computer via the iTunes sync process, all photos transferred from a different computer will be erased from the iPad first.
There is a free iDisk app available for the iPad via the iTunes store. If you transfer the photos to your iDisk, you can access the photos from your iDisk with the iDisk app, but you can't sync photos with your iDisk.
There is also a free MobileMe Gallery app via the iTunes store you can use to view photos in your MobileMe Galleries. -
How to show ipad application in itunes, but will only be assessable to owners, not the general public by using lock code/password protected on iTunes
So if I understand you properly, I need to create EOs for all my list of values (which are based on views of Oracle apps tables) and base my VO on those EOs. And then I setup associations between these EOs and the Item EO. Then I include the these EOs in my Items VO and add the description attributes to my list of attributes. I had done this for the list of users, but for the views of Oracle I had just created read only VO. Sounds like that won't work if I want to display the description. I know what to do - I guess I was hoping there was a way to use the read only VO.
Thanks
Karen -
How do I set an event to repeat every 4 weeks on iCal on my ipad 2?
How do I schedule an event to repeat every 4 weeks in iCal on my iPad 2?
Wow, I'm so used to setting up most repeated events on my mac in BusyCal that I didn't realize how limiting iPad/iCal was. I'll be curious to see if anyone has a trick to accomplish this. Thanks for posting this "issue".
-
Error while uploading images to SAP Mobile Documents from iPad application using ObjectiveCMIS.
Hi,
I am getting the error while uploading images to SAP Mobile Documents from custom iOS(iPad )application using ObjectiveCMIS library.
My Custom method is as follows:
- (void)createSalesOrderRouteMapImageInFolder:(NSString*)salesOrderRouteMapFolderId routeMapImageTitle:(NSString *)imageTitle routeMapContent:(NSData *)imageData
NSInputStream *inputStream = [NSInputStream inputStreamWithData:imageData];
NSMutableDictionary *properties = [NSMutableDictionary dictionary];
[properties setObject:[NSString stringByAppendingFileExtension:imageTitle] forKey:@"cmis:name"];
[properties setObject:@"cmis:document" forKey:@"cmis:objectTypeId"];
[self.session createDocumentFromInputStream:inputStream
mimeType:@"image/png"
properties:properties
inFolder:salesOrderRouteMapFolderId
bytesExpected:[imageData length]
completionBlock:^(NSString *objectId, NSError *error) {
NSLog(@"Object id is %@",objectId);
if(error == nil) {
[inputStream close];
NSLog(@"Uploading Sales order route map successfully.");
[[NSNotificationCenter defaultCenter] postNotificationName:SaveOrderSuccessNotification object:nil];
} else {
[inputStream close];
NSLog(@"Uploading sales order route map failed.");
[[NSNotificationCenter defaultCenter] postNotificationName:SaveOrderFailedNotification object:error];
} progressBlock:^(unsigned long long bytesUploaded, unsigned long long bytesTotal) {
NSLog(@"uploading... (%llu/%llu)", bytesUploaded, bytesTotal);
OBjectiveCMIS Method in which i am getting error during upload:
- (void)sendAtomEntryXmlToLink:(NSString *)link
httpRequestMethod:(CMISHttpRequestMethod)httpRequestMethod
properties:(CMISProperties *)properties
contentInputStream:(NSInputStream *)contentInputStream
contentMimeType:(NSString *)contentMimeType
bytesExpected:(unsigned long long)bytesExpected
cmisRequest:(CMISRequest*)request
completionBlock:(void (^)(CMISObjectData *objectData, NSError *error))completionBlock
progressBlock:(void (^)(unsigned long long bytesUploaded, unsigned long long bytesTotal))progressBlock
// Validate param
if (link == nil) {
CMISLogError(@"Must provide link to send atom entry");
if (completionBlock) {
completionBlock(nil, [CMISErrors createCMISErrorWithCode:kCMISErrorCodeInvalidArgument detailedDescription:nil]);
return;
// generate start and end XML
CMISAtomEntryWriter *writer = [[CMISAtomEntryWriter alloc] init];
writer.cmisProperties = properties;
writer.mimeType = contentMimeType;
NSString *xmlStart = [writer xmlStartElement];
NSString *xmlContentStart = [writer xmlContentStartElement];
NSString *start = [NSString stringWithFormat:@"%@%@", xmlStart, xmlContentStart];
NSData *startData = [NSMutableData dataWithData:[start dataUsingEncoding:NSUTF8StringEncoding]];
NSString *xmlContentEnd = [writer xmlContentEndElement];
NSString *xmlProperties = [writer xmlPropertiesElements];
NSString *end = [NSString stringWithFormat:@"%@%@", xmlContentEnd, xmlProperties];
NSData *endData = [end dataUsingEncoding:NSUTF8StringEncoding];
// The underlying CMISHttpUploadRequest object generates the atom entry. The base64 encoded content is generated on
// the fly to support very large files.
[self.bindingSession.networkProvider invoke:[NSURL URLWithString:link]
httpMethod:httpRequestMethod
session:self.bindingSession
inputStream:contentInputStream
headers:[NSDictionary dictionaryWithObject:kCMISMediaTypeEntry forKey:@"Content-type"]
bytesExpected:bytesExpected
cmisRequest:request
startData:startData
endData:endData
useBase64Encoding:YES
completionBlock:^(CMISHttpResponse *response, NSError *error) {
if (error) {
CMISLogError(@"HTTP error when sending atom entry: %@", error.userInfo.description);
if (completionBlock) {
completionBlock(nil, error);
} else if (response.statusCode == 200 || response.statusCode == 201 || response.statusCode == 204) {
if (completionBlock) {
NSError *parseError = nil;
CMISAtomEntryParser *atomEntryParser = [[CMISAtomEntryParser alloc] initWithData:response.data];
[atomEntryParser parseAndReturnError:&parseError];
if (parseError == nil) {
completionBlock(atomEntryParser.objectData, nil);
} else {
CMISLogError(@"Error while parsing response: %@", [parseError description]);
completionBlock(nil, [CMISErrors cmisError:parseError cmisErrorCode:kCMISErrorCodeRuntime]);
} else {
CMISLogError(@"Invalid http response status code when sending atom entry: %d", (int)response.statusCode);
CMISLogError(@"Error content: %@", [[NSString alloc] initWithData:response.data encoding:NSUTF8StringEncoding]);
if (completionBlock) {
completionBlock(nil, [CMISErrors createCMISErrorWithCode:kCMISErrorCodeRuntime
detailedDescription:[NSString stringWithFormat:@"Failed to send atom entry: http status code %li", (long)response.statusCode]]);
progressBlock:progressBlock];
Attaching the logs:
ERROR [CMISAtomPubBaseService sendAtomEntryXmlToLink:httpRequestMethod:properties:contentInputStream:contentMimeType:bytesExpected:cmisRequest:completionBlock:progressBlock:] HTTP error when sending atom entry: Error Domain=org.apache.chemistry.objectivecmis Code=260 "Runtime Error" UserInfo=0x156acfa0 {NSLocalizedDescription=Runtime Error, NSLocalizedFailureReason=ASJ.ejb.005044 (Failed in component: sap.com/com.sap.mcm.server.nw) Exception raised from invocation of public void com.sap.mcm.server.service.AbstractChangeLogService.updateChangeLog(java.lang.String,boolean) throws com.sap.mcm.server.api.exception.MCMException method on bean instance com.sap.mcm.server.nw.service.NwChangeLogService@4e7989f3 for bean sap.com/com.sap.mcm.server.nw*annotation|com.sap.mcm.server.nw.ejb.jar*annotation|NwChangeLogService in application sap.com/com.sap.mcm.server.nw.; nested exception is: javax.ejb.EJBTransactionRolledbackException: ASJ.ejb.005044 (Failed in component: sap.com/com.sap.mcm.server.nw) Exception raised from invocation of public com.sap.mcm.server.model.ChangeLog com.sap.mcm.server.dao.impl.ChangeLogDaoImpl.findByUserId(java.lang.String) method on bean instance com.sap.mcm.server.dao.impl.ChangeLogDaoImpl@2852b733 for bean sap.com/com.sap.mcm.server.nw*annotation|com.sap.mcm.server.nw.ejb.jar*annotation|ChangeLogDaoImpl in application sap.com/com.sap.mcm.server.nw.; nested exception is: javax.persistence.NonUniqueResultException: More than 1 objects of type ChangeLog found with userId=25f8928e-8ba0-4edd-b08e-43bf6fb78f1a; nested exception is: javax.ejb.EJBException: ASJ.ejb.005044 (Failed in component: sap.com/com.sap.mcm.server.nw) Exception raised from invocation of public com.sap.mcm.server.model.ChangeLog com.sap.mcm.server.dao.impl.ChangeLogDaoImpl.findByUserId(java.lang.String) method on bean instance com.sap.mcm.server.dao.impl.ChangeLogDaoImpl@2852b733 for bean sap.com/com.sap.mcm.server.nw*annotation|com.sap.mcm.server.nw.ejb.jar*annotation|ChangeLogDaoImpl in application sap.com/com.sap.mcm.server.nw.; nested exception is: javax.persistence.NonUniqueResultException: More than 1 objects of type ChangeLog found with userId=25f8928e-8ba0-4edd-b08e-43bf6fb78f1a}
2015-03-12 04:08:31.634 Saudi Ceramics[4867:351095] Uploading sales order route map failed.Hi Sukalyan,
Have you checked the below links?
These will give you step by step implementation procedure.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a099a3bd-17ef-2b10-e6ac-9c1ea42af0e9?quicklink=index&overridelayout=true
http://wiki.sdn.sap.com/wiki/display/WDJava/KmuploadusingWebdynproapplication
Regards,
Sandip -
Error during client copy in GRC 10.0 -Application exit
Hello Experts,
After installing GRC 10.0,as post installation activity ,
we are doing client copy (accordence with the sap note 1505255).
but we are getting 'Application Exit Error' when executing method FDT_BEFORE_EXPORT_C:
any help would be appreciated.
regards,
vinay singhHI
Can you attach client copy log for analysis.
Regards
Rajan Arora
Maybe you are looking for
-
Adobe Acrobat Pro XI trial install failure
I have tried several times to install the trial of Acrobat Pro XI. Each time, after the Download Assistant downloads the Installer, I run the installer, and receive two error messages. First: "The installation cannot proceed, because some of the proc
-
PC crashed. After re-install my CS3 version of Bridge and PS will not open .cr2 files whereas they did open theses files prior to crash. Lightroom still able to open same files. Please guide me to answer as am doing wedding for daughter's friend in 2
-
Hi, i have created a query by copying from other query and transported it.But i couldnt open the new query. I couldnt understand what the problem is. first query is working fine. Transportation is successful. pls, help me in this shylaja.
-
Using Crop Shapes in Artwork and Effects
I am going insane! All I want to do is take my photo and edit it so that the photo is a shape in the "crop shapes" in artwork and effects. But when I drag a shape over, the inside of the shape is black, and the photo shows around the outside. How do
-
I am trying to setup 2 1240ap in a bridge mode using external antennas. I am wonder how you line up the antennas to obtain the best signal. I know the 1300 series has software that allows you to see a signal as you line up the antennas, but I don't t