ICal cannot save new entries in Leopard!! When showing Birthdays Calendar

It happens after upgrading to Mac OS X Leopard. I'll tried the same iCal and Address Book with a Mac OS X Tiger 10.4 and it works fine!
The problem:
- Occurred after upgrading to Leopard
- When turning on the "Show Birthdays Calendar" (in Preferences...)
- Changes in iCal, e.g. new entries, amending existing entries, deleting entries, etc., will NOT be saved!
- It works again if the "Show Birthday Calendar" is unchecked
- It also work with a "small" address book but not a BIG one -- My original one has over 2,500 contacts. If I replace it with a small one, these's no problem encountered.
Appreciate help!

Could it be that the setting Sync Services in Entourage doing the erasing entries?
I am having fits trying to stabilize calendars and sync. Entourage to iCal to .mac to Nokia E61i is an awful chore, often long hours not successful too.

Similar Messages

  • IPhon 4: After recently updating to version 7.1.2, all my past calendar entries disappeared and I cannot add new entries.

    After recently updating to 7.1.2, all of my past calendar entries for 22014 disappeared and I cannot add new entries??

    What account were you using to sync your Calendar?  Make sure that account is added to the device, and make sure that Calendars is turned on for that account. 
    Then, go to Settings > Mail, Contacts, Calendars, and make sure that under the Calendar section that 'Sync' is set to 'All Events'.
    Then go to the Calendar app, go to Calendars, and make sure that you have that account enabled.
    Then, close out all the running apps on your device, and restart it.
    Open up your Calendar app.  Are your entries back?

  • I lost a .docx word file , then i found it as a .asd file in the office recovery folder , but i cannot save it as a docx, when i save as a docx file or any other format i cannot find it in the destination folder and

    i lost a .docx word file , then i found it as a .asd file in the office recovery folder , but i cannot save it as a docx, when i save as a docx file or any other format i cannot find it in the destination folder

    No, I already tried looking at that. The file that recovered was not in the trash, it appeared in my documents folder. I opened it up and inside was an iText Express document with coding. Then inside of there, was and then and this "SoftwareMap" document contained a bunch of coding and symbols and words.

  • Cannot see "New Entries" in transaction BD54

    Hi all,
    I am working on an IDOC to File scenario.I am doing the ALE settings. However when i try to create a Logical system  using transaction BD54; it says " Display View 'logical Systems':Overview"
    also i cannot see button for New Entries.
    kindly suggest solution.
    Neha

    This may be problem with your roles and profiles given to your user.
    You have only display authorization for this system, Contact to your basis team to give you the authorization for development / customization also.
    Regards,
    Sandeep Kaushik

  • Cannot Save New Document to SP2010 from Excel 2007

    I have two users who cannot save a new file from Excel 2007 to Sharepoint 2010 using the network share path. They receive the following error:
    You cannot save the file you selected. The folder you selected is not an actual file system location. 
    However, other users can save this way with not trouble at all. 
    When they have the Excel file open, they go to Save As... and the window opens. Then they type in the path to the Sharepoint library where they want to save the file: \\intranet\DavWWWRoot\site\library\
    At this point, they should be able to click the Save button and the window will refresh to the Sharepoint library. They would then be able to enter the name of the file and click the Save button again. However, when they click the Save button the first time
    to refresh the window, nothing updates and the path they just typed goes away.
    My first thought was an issue with permissions, but I've checked and double checked that they are in the correct group.
    Then I decided to go even more basic and have them use Windows Explorer to browse to the location. They were able to.
    I then had them right click within Windows Explorer, select New, and click Text Document. Not only were they able to create the new text file, but I confirmed it updated
    the Sharepoint library successfully. So, that obviously rules out any issues with permissions.
    Out of sheer frustration, I even tried mapping a network drive to the Sharepoint library and having them save to the mapped drive location, which of course yielded the exact same error.
    I have also double checked that the Webclient service is running on the machines. 
    One more piece to note is that these two users are still running XP. They'll be upgraded to Win7 later this year, but this needs to work before then.
    Any help or suggestions would be greatly appreciated.

    Hi,
    Did the issue only occur in Excel? What about the other Office suits?
    Please copy the site URL to the File name Text Box in the Save as window. Like:
    http://intranet\site\library
    Regards,
    George Zhao
    TechNet Community Support

  • Cannot save new outlook contacts or access Global Address List

    I have outlook 2007 connected via VPN to exchange server.  I can
    1) Send and receive emails
    2) Edit contacts that have already been created some time ago
    3) Copy and paste existing contacts
    However, when I try and save a new contact it says the Microsoft exchange server is not available. I am connected because I am showing as connected and contacts created via the outlook web app appear almost immediately in my Outlook.  However,
    I cannot save any edits to these but can copy and paste as a whole record.
    Also, I cannot access the Global Address Book at all.
    Does anyone know what the problem could be?
    Thanks
    Zeze

    Hi Zeze,
    Please check whether the issue happens in Outlook Online mode. If it doesn’t happen in Online mode, please create a new Outlook profile to have a try:
    https://support.microsoft.com/kb/829918/en-us
    Regards,
    Winnie Liang
    TechNet Community Support

  • My bookmarks are disappearing/reappearing randomly and I cannot save new ones

    Since this morning 8/17 I have had an odd problem with my bookmarks. Initially both my Blogs and News and Views sub-folders came up empty while nothing else was affected and the bookmarks in them were not to be found elsewhere. Later, after a reboot, I was able to get back some but by no means all of the ones in those folders. I also cannot save any new bookmarks (which would have solved the problem since I can look up the websites I'm currently missing). Also the history/show all button brings up the bookmark menu but it is not saving anything as 'show all today' comes up empty.
    The only thing I can think of was that last night, while trying to solve an unrelated problem, I went to tools>options>privacy and cleared my history from there. Unfortunately, I was not having this problem right after that although I rebooted my computer afterwards.
    I just updated firefox a few minutes ago so it isn't an upgrade issue, I think.
    What the heck is going on?

    It sounds like the file that stores bookmarks and History may be damaged. See [http://kb.mozillazine.org/Locked_or_damaged_places.sqlite Locked or damaged places.sqlite - MozillaZine Knowledge Base]

  • Bookmarks box will not show up and I cannot save new bookmarks.

    I cannot save any new bookmarks and the bookmarks box to enter in information about the website you want to save will not pop up. I already did the trouble shooting for extensions and themes with no results. What should I do?

    Have a look at this rather long article [[Lost bookmarks]]
    The article covers most reasons why bookmarks may be problematic. I would also recommend you make a manual backup of any bookmarks you currently have to guard against further loss and any accidental overwriting. See [[Backing up and restoring bookmarks#w_manual-backup| manual backups ]]

  • Cannot save new names/info into Contacts

    When I save new people and their respective contact info to iPhone Contacts, they do not appear the next time I look at Contacts. However, when I dial manually, I see the person's name next listed at the top of the phone (i.e. the info that I had tried to save appears). Not fixed after restoring.

    Edit: I solved the problem. Had to ssh and delete the address book files

  • Lost bookmarks, force quit and re-boot with no change. still cannot save new bookmarks. is there a solution?

    help

    Hello Badgeptfc
    I would try first to reset all settings by going to Settings > General > Reset > Reset All Settings. You will not lose any data by doing this and test it out. If you still cannot save a bookmark, then you will need to restore your iPad and not restore from back up. The instructions for restoring are outlined in the article below.
    iTunes: Restoring iOS software
    http://support.apple.com/kb/ht1414
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • Spotlight menu hidden behind menu bar in Leopard when "Show Desktop" Expose

    The Spotlight menu is partially hidden behind the menu bar in Leopard when using "Show Desktop" (part of Expose). I tried using "Show Desktop" with keyboard shortcut keys and screen corners, and this behavior still exists. I tried toggling Spaces on and off, and the behavior still exists.
    This has been an issue since day one of using Leopard, and on every bootup. It's absolutely reproducible, and this is a bug, unless someone can prove me wrong? (Hopefully, I'm wrong.)

    Fixed in 10.5.2.

  • After my upgrade to iOS6, my iPhone4 lost all entries in the Reading List and Bookmarks.  I cannot add new entries.  Any thoughts on how to fix this?

    I'm not 100% positive that this is related to the iOS6 upgrade, but the timing is certainly suspicios.  Previously, I had 7 entries in Safari's readling list and many entries in the Bookmarks.  Now, I have nothing except the large pair of sunglasses and help text that tells me how to add a link to the reading list.
    When I am looking at a webpage and click on the Forward button, I'm giving all sorts of choices now in full color...  facebook... Message... Twitter... Mail... Add to homescreen.  The following buttons are all grey: Print, Copy, Bookmark, and Add to Reading List.
    I'm guessing that the icon color is a red herring.  Print and Copy, despite being grey, appear to work fine.  Bookmark and Add to Reading List have problems. 
    Adding to the Reading List makes the forwarding screen go away, as though the link was added.  When I click on the Bookmark icon and look at my reading list, it remains empty, displaying the large sunglasses and help text, as though the list has never had an entry added to it.
    Adding a Bookmark prompts me to enter the name and location.  Interestingly, the list of locations is empty.  I have a single folder with no name and a check mark next to it.  I cannot do anything else (make a new folder, for example).  Once added, when I click on the Bookmark icon to look at my bookmarks, that list remains empty of individual bookmarks.  All I have are: Reading List (still empty), History (full of expected entries), Bing (which takesme to some Bing thing).
    Any help in restoring my bookmarks and Reading List entries would be appreciated.  Thanks!

    Thanks. That solved it. I had my doubts since I wasn't concerned about my lost bookmarks. I was concerned about the broken functionality. In any event, restoring from a backup solved both the functionality and the lost bookmarks. I appreciate the response!

  • WRT54GC Cannot save new port forwarding configs

    I have a WRT54GC, and I use port forwarding, and have several ranges configured already.  But now I find that I cannot add or change any of the existing configurations.  Whenever I modify anything, and click Save Settings, the browser window just hangs there forever.  Reloading, or opening a new browser window shows that no changes were saved.  If I open the forwarding page and click Save Settings without changing anything, then it works OK.  But that, of course, is useless.
    BT

    Hi… I hope you are not making any changes on a wireless PC. Delete an entire row from that page and try saving that. See what happens. I could not guess why are you doing so much of port forwarding? You can trigger the port whenever you access any service from outside. Forwarding is to be used only for hosting a service (such as FTP server) or for specific devices (such as Xbox or VoIP devices). If you are not able to save the settings when you delete the row in that screen, just go ahead and reset the router for 1 min by pressing the reset button and reconfigure it.

  • ICal - Cannot add new events

    Having an issue where iCal is not allowing us to add new events. It will allow you to add events on the iPhone, and when you sync, it adds those events, but it will not allow events to be added from the iCal application on the Mac itself. The user is using Mobile Me, which I am not familiar with. Could there be a setting that disallows new events to be added in iCal on the Mac, and only accepts events from the iPhone?
    Thanks!
    R~

    I am STILL having this problem and I tried your test admin approach, but it still hasn't fixed MY account. I can log in on my husband's account, or a test admin user account, and I can add events to iCal. When I switch back to my own account (the main account on the computer that is used all the time) -- no go - it still won't let me add events.
    Anyone have a guess as to why the problem would be affecting one account only, but not the others?

  • DataSocket Server Manager cannot save new setting.

    I have run DataSocket Server Manager and tried changing the settting (Creators) to allow everyhost to write and create new items.Then saved my new setting. I have restarted DataSocket Server. When I run DataSocket Server Manager again, it open a default setting not the one I saved.

    I am not able to reproduce this issue with the version of DataSocket that I have on my machine. What version of the DataSocket Server Manager are you running? You can see the version if you click on About DataSocket Server Manager from the Help menu. Also, DataSocket Server Manager saves its settings in the cwdssini.dss file in the DataSocket installation folder. The problem you're describing could happen if this file is read-only, so check attributes of this file.
    - Elton

Maybe you are looking for

  • How do I combine two dated (same date) sub folders to one?

    I have two "2011-05-21" sub-folders, one is properly under the folder "2011" while the other is under "2014".   They have different images in them so I would like to move the images in the 2014 folder to the 2011 folder.  Thanks.

  • Preflight method to identify fonts which will fail tagging/extraction

    Hello, I've run accross several PDFs that contain problematic fonts -- examples are: 1.  Adding tagging to the document adds strange characters around the fonts (i.e. "@" or "É") 2.  Copying and pasting the text to word creates strange boxes, questio

  • [Microsoft][ODBC SQL Server Driver][SQL Server]Could not find stored procedure 'dbo.sp_SPNAMEHERE'.

    OK, something seemed to have changed with my system because this error is NEW. It might be related to my system upgrade from Vista to Win7, but just guessing here. I run a database on a corporate MS Sql Server (2005) and an ASP application that conne

  • Important in PT

    hi i am doing my OCP, i finished three papers, now i waiting to write the PT. Could any one tell me what are the important topics in PT. And how i anazlye my statspack report. bcoz i take my statspack report, but i dont know how to anazlye that. what

  • Loss of Illustration (.ai) quality when printing to PDF

    Hello - (This was cross-posted two days ago in the Acrobat forum) We're running into some unpredictable problems when converting a structured (non-XML) FrameMaker file to PDF. Our images are created in Illustrator (CC), and inserted into FrameMaker (