ICal changes the time when importing from SonyEricsson K750i

Hi from Stockholm,
When syncing my mobile calendar and my iCal, all the times are set two hours behind.
Ex. in the phone an event could be 16.00-17.00 and in iCal it changes to 18.00-19.00.
The clocks are set the same. Timezone is deactivated.
What to do?
Thanx. Clack-boy.
PowerMac G3, 1,25   Mac OS X (10.4.7)  

hi
i guess you are in the wrong time zone with your K750i.
try these settings:
iCal: in "system preferences": clock: set time zone to CEST (stockholm, sweden)
K750i: settings for "time and date": "time zone" set to GMT + 2.00h and setting for "daylight saving" set to "standard time". don't set it to "Daylight saving" cuz it doesn't work properly then with iCal.
if your time on the K750i is wrong now, correct it in the section "time". but don't change the "time zone" anymore.
hope you got my meaning. apologizing for my english.
now, it should work. at least, my iCal and K750i do
Regards

Similar Messages

  • Wrong capture time when importing from iPhoto to FCPX

    I am experiencing a strange problem when importing from iPhoto to FCPX. If I open the info panel in iPhoto I see the real date/time when the picture was taken, but if I import them to an event in FCPX using the PHotos Browser and I check the info it shows the time when the image was imported to IPhoto and everything gets messed up.
    I have search for somebody with same problem but I have not found anything so far.
    MY workaround is to import directy onto the timeline, but it is... well, a workaround.
    Thanks in advance

    Why is knowing that important during the edit?
    Yes, FCP only shows the date imported" date metadata.  Future updates of FCP X I assume will add more metadata support, such as Creation Date and Modification Date, since metadata is vital to FCP X and there are some metadata handling features that are on the way. 

  • CUCM 8.6.2 - IP Phone 7940/7960 don´t change the time when finish DST

    Hi Guys,
    My Customer is having the problem about DST (date summer time) specifically about IP Phone 7940 and 7960. When finish the date summer time this model don´t change the time, only after restart logical or phisical. I simulated the problem in the CUCM with the same version 8.6.2.22900-9 and the problem too occur. I did the following procedure to try solve the problem:
    1) Put the lastest version firmware about IP Phone and didn´t worked;
    2) Put the lastest version dst and didn´t worked;
    I search about any bug related and didn´t found nothing.
    Any have idea about this?
    Thanks,
    Wilson                  

    Hi Wilson,
    Try installing TZ updates with steps in the document:
    http://software.cisco.com/download/release.html?mdfid=283782839&flowid=45898&softwareid=282074298&release=8.6%282-2013d%29&relind=AVAILABLE&rellifecycle=&reltype=latest
    Please find the link for EOS and SW Maintenance for 7960
    http://www.cisco.com/en/US/prod/collateral/voicesw/ps6788/phones/ps379/end_of_life_notice_c51-574072.html
    Hope this helps!!
    Regards.
    Tirtha

  • Why does iCal change the time of my events when I import my schedule? PLEASE HELP

    When importing my schedule (from my school website, week by week), I had no problem in September.  Now, something must be screwed up in my iCal, because the same documents are importing 3-4 hours behind my current time zone (Atlantic).  Atlantic time is specified in the files, so it isn't that.  This happens in the guest user as well.
    I turned off time zone support (I feel as though this is what made it stop working, as the default was off and I turned it on around the time it stopped working).  It still doesnt work even with time zone turned off and the time on my computer is set manually (instead of automatically detecting it).  Also, I tried to find the preference file in my library>preferences, but it didn't exact... not one single com.apple.ical plist file in there!!! It seems to work fine from my iphone EXCEPT it creates 2 events for each single event (at the same time) which is rather annoying.
    Anyone know/have any ideas on how to fix this??

    Yeah that was it, I realised straight afterwards (I'm just impatient lol). Thanks anyway

  • Can I change the tablespace when importing a schema

    I need to import a schema in a different tablespace other than the original.
    When I importing the .dmp the tables are created in the tablespace where they from.
    I don't want it, I need that the tables use the new tablespace.

    Can't think of an easy way to do thie.
    You could import by table - all tables in ts1, then change the users default tablespace, to ts2 etc.
    Bit long-winded.
    You could also pre-create the tables in the schema using the indexfile option on imp(port).
    do imp...indexfile=impexp.sql
    This creates a file (impexp.sql) with the table, index and constraints creation syntax.
    You need to edit this to get the table creation sql, then change the tablespaces for each of the tables to the ones you want.
    You run this to create the empty tables, then when you import, use ignore=y.
    Bob

  • Preserving time when importing from Photoshop Elements

    I have about 15K photos that I am moving from Photoshop Elements on Windows to Aperture. In Elements all my photos are in time order sequence plus the liberal use of tags. The tags work fine but the time sequence does not. Most photos have the date for when they were taken plus additional dates for when they were edited and/or when they were copied when I upgraded Windows/Photoshop. Some photos were from APS film that Walmart copied to CDs and I manually set the date. I have checked the metadata on a random set of photos and the date used by Photoshop on Windows is correct.
    My question is "Can I get Aperture to use the same rules as Photoshop Elements so that when I view "Photos" in Aperture, they will be in the same order. I check the manual; nothing on this. iPhoto has the same problem but then it doesn't support the same level of metadata as Aperture. Specifically, I need Aperture to support "Date Time Original" field when it is available. Otherwise, I will have to stay with Photoshop Elements.
    Anyone have a solution?
    Thanks
    PS Using the change date/time facility is not a realistic option since it would take days of labour for something that is already contained in the metadata

    This is because, when you port your slideshow to Premiere Elements, it becomes video -- and video has a resolution of essentially 640x480 pixels at 72 ppi.
    If you'd like to save your slideshow at full resolution, you'll need to use one of the other export options -- and you'll need to make it playable on a computer, which has a higher resolution than your TV.

  • Why did iCal change all times when it changed to wintertime?

    When wintertime (normal time) occurred the night before sunday, my Mac and my iPhone automaticaly changed. But not just that: all time settings for meetings and appointments were set back one hour!
    What do I do?

    kell3,
    Welcome to Apple Discussions.
    One of the first things to try is "refresh" the com.apple.iCal.plist file. You will find the com.apple.iCal.plist file in your Macintosh HD/Users/yourusername/Library/Preferences Folder. Quit iCal, drag the .plist file to your Desktop, log out/in or restart and check iCal for normal behavior.
    If that is unsuccessful, try resetting iSync. To do that you need to open iSync, and choose iSync>Preferences>Reset Sync History...
    If duplicates are not resolved on your iPhone, open "Settings" on the iPhone>Mail, Contacts, Calendars, Bookmarks>Accounts>your MobileMe account and turn off Calendars, when prompted delete data, and wait two minutes, then turn Calendars back on. When asked to merge the data, make that choice, and wait patiently. You should no longer have duplicates. If you are able, I recommend using a Wi-Fi connection to make the change.
    ;~)

  • Iphone 09 crashes every time when importing from an external hard drive

    Just bought a mac mini and I wanted to import my jpgs from my windows external disk (disconnected it from the pc temporarily.) However, I do not have enough hard drive on the mini to hold all of the pictures, so I moved the iphoto library (using the instructions obtained on this forum) to a second external drive (formatted as mac.) I'm trying to have iphoto import from the windows external hard drive and place the photos into the library located on the mac external hard drive. This shouldn't be a problem.
    However, iphoto will go fine for about 1000 photos then crash. It has done this the last 9 attempts. I also noticed that the photos that have been imported fine (I stopped the import to see how the software would work -- before it crashed out on me) and iphoto displays the photo, but when I click it, iphoto says the file cannot be found.
    Wow, this program has some serious flaws. I'm giving up on it, and hoping the Picassa port will work better.

    Did you want help or just to share the experience?
    Regards
    TD

  • Changing the time when the commitment is created.

    Hi everybody!!
    Does anybody now if the action of requesting a SC can built up a commitment. If the approver reject the SC the commitment should be rejected. In the PO creation the commitment shouldn't be created.
    Is that possible? if it is, can anybody give me some idea how it could be done.
    thanks for your attention
    Best regards
    Jorge

    Hi Jorge,
    We find the same issue in here. I have checked this forum, and get notes 900825 in which it is mentioned that the solution is possible using Badi only (not changing SAP standard). But unfortunately it is considered consulting issue and SAP would charge for this.
    I was thinking that perhaps we can utilize BADI triggered during SC creation, in which the BADI should be able to call FM in backend which can be used to create commitment. This commitment should be deleted afterward whenever the SC is rejected or the PO has been created as follow-on document (another BAdi should be utilized which will need to call FM to change the commitment).
    However I'm stuck on the function module that we can use in backend. For anyone reading this post, can you help?
    Best regards,
    Yosea

  • OTM - How can I sort the requirements when importing from CSV ?

    Hi,
    I am able to upload requirements into OTM, in a tree structure.
    But even though I am giving a "ViewOrder" column in my .xls/.csv file, the requirements do not get uploaded in the same order.
    Whats happening is, when the xls/csv is converted to xml, the vieworder tag isnt included, and in turn doesnt get posted to DB either.
    I also tried modifying a previously saved mapping file, by manually adding ViewOrder=ViewOrder and saving it.
    On selection it only accept sheets containing the column, but still it gets discarded during conversion.
    Is there any way to expand the set of required fields during upload, to include View Order?
    Is there any other way to ensure that the excel data gets uploaded in the same order as listed?

    Have you explored the options in the View -> Sort Photos menu?
    Regards
    TD

  • How Can I Delete Originals I Don't Care to Keep When Importing From SD Card?

    Hi All,
    Just installed LR3 thanks to Santa. Have been going thru the video tutorials as well as the Lightroom_3_Help PDF and Lightroom-GettingStarted_Lo PDF but I can't figure out how to simply delete files from the gitgo when importing from SD Card or from my HDD (files already moved to HDD but not yet culled or imported into LR3). I was hoping I could, in LIBRARY, just r/c on a file that is plainly not worth keeping and just delete it so I dont have to do it later. Seems like I could, this way, be able to concentrate more on the shots requiring editing.
    Also, need suggestions as to how I should import my files using DNG, Copy, Move, or Add. First off, I am not a working pro but am an occasional serious amateur. I'm picky and I like things to look good the first time and I like options.  The pix already on my HDD are in the PICTURES folder; those imported from SD card get moved to that PICTURES folder. I have, in the past, moved the processed verssions to a different DESTINATION folder - now I still have the originals and I have processed copies to post and share.
    I understand that LR3 does ND editing but I assume that if I only keep a DNG then any time I want a JPEG or PNG of a picture I have to open LR3 to make one. Since I only have been shooting a few hundred pix a year (though with my new D5000 this will change) I am not gonna load up my HDD any time soon. So, is there a way I can make a DNG file, keep the original RAW or JPEG file AND save a processed JPEG or PNG copy in my DESTINATION folder in one swell foop?
    Thanks in advance,
    Phil in San Diego

    Phil,
    PhilipCWells wrote:
     I understand that LR3 does ND editing but I assume that if I only keep a DNG then any time I want a JPEG or PNG of a picture I have to open LR3 to make one. Since I only have been shooting a few hundred pix a year (though with my new D5000 this will change) I am not gonna load up my HDD any time soon. So, is there a way I can make a DNG file, keep the original RAW or JPEG file AND save a processed JPEG or PNG copy in my DESTINATION folder in one swell foop?
    The LR Exchange site has three plug-ins that allow you to keep a "mirror" copy of your DNG/RAW images in JPG format for use by others without having to go into LR and generate them when needed.  The link is:
    http://www.adobe.com/cfusion/exchange/index.cfm?searchfield=tree&search_exchange=25&search _category=-1&search_license=&search_rating=&search_platform=0&search_pubdate=&num=25&start num=1&event=search&sticky=true&sort=0&rnav_dummy_tmpfield=&Submit=
    One of them should help you with this.
    Jeff (in San Diego as well)

  • Keyboard Shortcut for adding clip to queue when importing from P2 card

    Does anyone know what the keyboard shortcut is for adding a clip to the queue when importing from a P2 card? Thanks!
    G5   Mac OS X (10.4.8)  

    That would be the Log Clip button which is defaulted to F2.

  • How can I change the time of day that Automatic Updates installs?

    In Yosemite, you can choose to have apps and/or OS X system updates install automatically when available.  http://support.apple.com/en-gb/HT201541 says this happens 'overnight'. It's unclear whether this means the computer has to be left on overnight for the update to happen, but I'm assuming it does.
    Is there any way of changing the time when the updates are installed? Could I set it to happen in the morning so I don't have to leave the computer on all night?

    In Yosemite, you can choose to have apps and/or OS X system updates install automatically when available.  http://support.apple.com/en-gb/HT201541 says this happens 'overnight'. It's unclear whether this means the computer has to be left on overnight for the update to happen, but I'm assuming it does.
    Is there any way of changing the time when the updates are installed? Could I set it to happen in the morning so I don't have to leave the computer on all night?

  • How do I stop iCal from ever changing the time zones of my appointments?

    I cannot figure out time zone support in iCal, and just want it never to move the time of an appointment when I change time zones. I have tried switching time zone support on and off, and it makes no difference, the appointment times change when the time zone changes. It's infuriating! How do I make it stop?
    Thanks!

    Whitecity,
    According to iCal Help...Changing the time zone for an event: Choose iCal > Preferences, click Advanced, and select the "Turn on time zone support" checkbox...To change the event's time zone, choose a time zone from the pop-up menu in the Info drawer. To make the event appear at the same time no matter what time zone the main calendar view is in, choose Floating..;~)

  • Captivate 8 Continually Crashes: When trying to publish, When trying to use the Object Style Manager. Also it is blocked by Windows Firewall (adobecaptivatews) every time it launches. Working with Captivate App Packager the pane to import from Adobe Edge

    Captivate 8 Continually Crashes: When trying to publish, When trying to use the Object Style Manager. Also it is blocked by Windows Firewall (adobecaptivatews) every time it launches. Working with Captivate App Packager the pane to import from Adobe Edge is missing, so not clear how to import. Overall it seems unstable. Am I doing something wrong? Trying to evaluate before buying so working on a trial version (14 days left), but a bit concerned with Captivate 8 Performance. Please help! :-

    Hi Vikram and Lilybiri,
    Thanks for your responses :-)
    I'm working on Windows 8.1... I think that I may have found the issue... I was saving the file in a project directory rather than the default My Captivate Projects folder...
    Perhaps Captivate was struggling to find resources it needed?
    It hasn't crashed for a while now, though it is struggling - I'm working with a 54 slide PPT presentation that is linked and it takes a very long time to interact.
    Sometimes it says that I've removed slides, which I haven't?
    Best,
    Christy.

Maybe you are looking for