ICal chooses a different date when "Mon" is used instead of "Monday"...

I just made an appointment for an eye exam at Pearle Vision. They've sent me and email in which it had the day, date and time. I selected it, on my iPhone 5 running iOS 7. It set the event on a totally wrong date, a few months difference.
This is how the email has it typed out.
Mon 04-07-2014 02:00 PM
iCal set the even for July 4th, which here in the US, every eye doctor isn't working for the most part.
I sent a few test emails with different ways of typing it out. It would appear if "Mon" was used, then it would think that the second set of numbers is the month.
Type out Monday 04-07-2014 02:00 PM and it will set an event for April 7, 2014 at 2PM. Type out Mon 04-07-2014 02:00 PM and it'll set an event for July 4th 2014 at 2PM.
I also tried this on my 2012 Mac Mini with 10.9.2, same results happen.
Any thoughts?
KOT

Thanks. That makes sense.
So to understand this correctly:
To be sure to get the result I want, that is a Session Bean that keeps track of animals added to my list, I will have to used the same instance of a STATEFUL Session Bean.
The reason why it works here with a STATELESS Session Bean is because of the pooling but I CANNOT rely on this feature as with more requests.
Am I understund this correctly?
Claus

Similar Messages

  • Phone is using data when not in use. How do I make it stop?

    My iPhone 4S is using data when not in use. Any thoughts on how to make it stop?

    Hello Oakleymp
    You could always turn off cellular data in Settings to get it to stop using data while it is on standby. Another option to troubleshoot the issues is to reset all settings, go to Settings > General >Reset > Reset All Settings.
    iOS: About the Cellular Data setting
    http://support.apple.com/kb/HT4203
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • Can I choose an activation date when signing up?

    I'm looking at potentially placing an order but was wondering if anyone knows, can you set an activation date when you place the order?
    The reason I ask is that I'm tied into a broadband contract until March with pretty hefty cancellation charges attached. If I can order Vision now but choose not to actually go live until March that would be perfect.
    If this isn't possible I'll obviously have to wait until March to place any order.
    I've tried to contact BT on this but unfortuantely no-one is getting back in touch with me!

    In that case just do whatever is necessary to cancel when the time is right giving the notice period and get your MAC code and switch. Vision isn't usually activated on a line until after it has settled down. The process of switching ought to be painless.
    Life | 1967 Plus Radio | 1000 Classical Hits | Kafka's World
    Someone Solved Your Question?
    Please let other members know by clicking on ’Mark as Accepted Solution’
    Helpful Post?
    If a post has been helpful, say thanks by clicking the ratings star.

  • IPhone using extremely high amounts of data when not in use

    I have a 4S on AT&T and am grandfathered in w/ the unlimited data plan. Last month I got the notification that I was in the top 5% of data users (which sounds crazy to me considering what some other people I've read about seem to use). According to AT&T's site I had used 2.09 GB with 16 days left in my billing cycle.
    Once I got that notification I logged on to see if I could find out when I was using such large amounts of data. It turns out between midnight and 1 am almost every night there was large amounts of data sent. I think this is strange since for two reasons, 1) I'm on WiFi at home in my apartment and 2) I wasn't even awake at the times these charges occurred.
    Example: January 6, 2012 at 12:40 am I was charged for 417,327kb, roughly 417MB.
    Similar data usage occurred almost every night going back to 12/28/11. On 12/29 I was charged for 468MB at 12:21am. Very unlikely this was actually data I used since I had work the next day and wasn't awake. It honestly looks like 80-85% of my data usage is coming from these occurrences. It also isn't likely that this is a total of data used throughout the day as there are other entries of smaller amounts spread out throughout the day.
    Now, if I was on a truly unlimited plan and there was no such thing as throttling I really wouldn't care about this. But the fact is that my 3G speeds are being throttled (just ran speed test at a location I used to get over 1Mbps and I am was at .07 Mbps). I have spoken to AT&T and they insisted it was an issue w/ my phone, either the hardware or the OS. So I went to apple and the "Genius" did a DFU restore for me in store and told me that would fix it. It hasn't and now I'm stuck with this constantly happening and unbearably slow 3G data speeds for the rest of the month.
    That was my last billing cycle where I was throttled down to download speeds of .07mbps. Unusable. This month I decided to closely monitor my data usage. I turned off iCloud and photostream, and turn off data whenever I'm using wifi. I turned off the sending info to apple setting.
    I checked my account on ATT.com today and noticed that yesterday morning at 7:58 am while driving to work I somehow used 247 MB. Don't ask me how, I'm not steaming anything and my phone is either locked or playing music from the iPod app. I could probably stream Netflix for 5 hours and not use that much data.
    I called AT&T to let them know (AGAIN) and got bumped up to a "Data manager" who was incredibly b*tchy and rude. She said there must be some app that's using that much data to update. I don't have any apps that are even that size so I don't see how this could possibly be the case. I tried to talk with her about how that can't really be the case and she just kept repeating that there must be some app using the data blah blah. I've gone to apple with this last month after failing with AT&T and at first they did a DFU restore and we restored the phone as new, then it kept happening so I went back they replaced my phone. AT&T said it must be a hardware or software issue last month, but this month it must be an app that's doing this. I can't get a straight answer from them and they just keep passing the ball to say it's Apple's problem.
    I really don't know what to do. I'm grandfathered in on the unlimited plan and don't really want to change that. Say I change my plan to the 3GB's at the same $30/month. What's to say this won't keep happening and I'll be over that 3GB's in 10 days then get charged an extra $10 for each additional GB?!
    I can't think of any apps I've downloaded in the past few months that would result in this change and I can't live with another 2/3 of my billing cycle being throttled down to unusable speeds.
    Has anybody else had anything similar happen? I have no idea what to do next (and sorry for the long rant but I'm fresh off the phone with AT&T and I'm ******)

    Thanks for the link. I only went through the last three pages and unfortunately it looks like there is no solution. I turn data off every night and turn it on only when I'm not in a wifi area. It seems that as soon as I turn it on, within an hour it charges me data for a backlog of whatever it didn't do when it was connected to wifi.
    I think it's absolutely disgusting that AT&T can just dismiss this and act like it's the users fault. Apps and email updating in the middle of the night to the tune of 400MB? I highly doubt it and then when I called to ask them about it they try to make me sound stupid like I have an app or two open. Just really ticked me off. The worst part about it is that there doesn't appear to be anything I can do about it aside from never using my data.

  • Page shows different data when saved after few minutes

    Hi,
    I have a peculiar problem to describe.
    I have a page which contains af:table inside af:panelCollection layout. I use a af:commandLink to drilldown to another page using setCurrentRowWithKey method.
    I am able to drill down to the correct data in another page which contains data that is editable. Once after editing the page when i click save button, i am able to save the data. This is working fine.
    But the problem is, once i drilled down to this edit page and edit some fields and save it after few minutes, say 5 minutes later, it is not saved. Also, the page is refreshed to bring some random record.
    Can anyone let me know why is this happening and how to resolve it?
    Thanks

    Hi Timo,
    Which jdev version?I am using jdev 11.1.1.3.0.
    Is it possible that the data has changed (e.g. by an other user) after you drilled to the one record you want to change?There is a possibility that the data can be changed by other user as well. But, for the time being we have implemented for the single user environment.
    When you click save after some time, do you get any error (on the screen or in the logs)?Yes. On the screen, it is displayed as "oracle.jbo.JboException: Document type mismatch (source INVOICE, type Sales)". It is a validation exception thrown at viewRowImpl level by me. But it validates the data perfectly when saved immediately after editing
    Which session timeout do you have configured in your web.xml?Session-timeout is given as 240
    Have you tried your use case with the HR schema?Yes. when i reproduce the situation in HR schema, it is getting saved perfectly
    Regards

  • Displaying different data in datagrid cells using a cellrenderer?

    Gidday guys
    I'm populating a datagrid using SQLite. Some SQL columns contain 1 or 0 as booleans, and I want to display this as a bullet point in my datagrid.
    Currently I have a conditional that checks for a 1, and if found, displays the bullet point. I figure there must be a better way, but am unsure how to do this with cellrenderers. I get how to add components using cellrenderers, but is there a way to replace the cell display with another character (without actually changing the data of the dataprovider) ?
    Cheers for taking a look.

    It would be better performance to draw a simple shape rather than a TextField with a single character in it. To do so, yes you'd need to override the cell renderer. I often choose the latter but usually use GPU-driven components like FeathersUI components.
    If you have an excessively large amount of data and/or are on a device and want to do this because you're getting poor performance, that's a good usage of your time. Also if you just want to learn how to do it just to do it, that's can also be a good usage, if you complete your work on time. However if it's for desktop and/or the data is pretty minimal (few dozen rows up to a hundred or so, with a nominal amount of columns), it's probably not worth your time.
    I'm sure you have this link but:
    http://help.adobe.com/en_US/ActionScript/3.0_UsingComponentsAS3/WS5b3ccc516d4fbf351e63e3d1 18a9c65b32-7fd4.html
    All component cellrenderers tend to be the same (because larger components use smaller components and the architecture lines up). The difference is in making sure your renderer supports the data it's provided. If you need only a TextField and/or a bullet, that's pretty easy. Most components (like lists) support icons and you'll need to make sure you provide the complete implementation of all data scenarios in your cellrenderer.
    Pay attention to cell dequeue techniques on some components. If all cells commonly have only text, cells aren't destroyed and recreated as the list scrolls. The data is resent to the cell and the cell has a chance to simply update itself rather than recreate itself from scratch. This offers a big performance increase not having to destroy and recreate needlessly. It can also really confuse people when cells start appearing empty as you scroll (because the cell construction methods aren't run). 

  • Process.Start - getting different output when running command using this method than I am if I run same command in CMD prompt

    Hi
    Creating an application to analyze .dmp files - all working well except this odd issue
    If I open command prompt and enter this command:-
    kd -z C:\Windows\MiniDump\042414-24632-01.dmp -c "!analyze -v"
    Then it works and shows me all the output I need (shown at bottom of post)
    If I run same command in VB.net using following code - then it doesn't give the same output - the bits I need at the end created by the !analyze -v switch don't appear
    Any ideas why it is not seeing the switch correctly - setting a breakpoint and checking contents of startinfo seems to be showing correct cmd line i.e. "kd -z C:\windows\minidump\042414-24632-01.dmp -c "!analyze –v;q""
    Dim myprocess As New Process()
    myprocess.StartInfo.FileName = "C:\Program Files (x86)\Windows Kits\8.1\Debuggers\x86\kd"
    myprocess.StartInfo.Arguments = "-z C:\windows\minidump\042414-24632-01.dmp -c ""!analyze –v;q"""
    myprocess.StartInfo.UseShellExecute = False
    myprocess.StartInfo.RedirectStandardOutput = True
    myprocess.StartInfo.CreateNoWindow = True
    myprocess.Start()
    TextBox1.AppendText(myprocess.StandardOutput.ReadToEnd())
    Output when run from cmd prompt:-
    C:\Program Files (x86)\Windows Kits\8.1\Debuggers\x86>kd -z C:\Windows\MiniDump\042414-24632-01.dmp -c "!analyze -v;q"
    Microsoft (R) Windows Debugger Version 6.3.9600.17298 X86
    Copyright (c) Microsoft Corporation. All rights reserved.
    Loading Dump File [C:\Windows\MiniDump\042414-24632-01.dmp]
    Mini Kernel Dump File: Only registers and stack trace are available
    Symbol search path is: *** Invalid ***
    * Symbol loading may be unreliable without a symbol search path. *
    * Use .symfix to have the debugger choose a symbol path. *
    * After setting your symbol path, use .reload to refresh symbol locations. *
    Executable search path is:
    * Symbols can not be loaded because symbol path is not initialized. *
    * The Symbol Path can be set by: *
    * using the _NT_SYMBOL_PATH environment variable. *
    * using the -y <symbol_path> argument when starting the debugger. *
    * using .sympath and .sympath+ *
    Unable to load image \SystemRoot\system32\ntkrnlpa.exe, Win32 error 0n2
    *** WARNING: Unable to verify timestamp for ntkrnlpa.exe
    *** ERROR: Module load completed but symbols could not be loaded for ntkrnlpa.exe
    Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x86 compatible
    Product: WinNt, suite: TerminalServer SingleUserTS
    Built by: 7601.18205.x86fre.win7sp1_gdr.130708-1532
    Machine Name:
    Kernel base = 0x82e3e000 PsLoadedModuleList = 0x82f874d0
    Debug session time: Thu Apr 24 13:36:18.672 2014 (UTC + 1:00)
    System Uptime: 0 days 0:00:38.703
    * Symbols can not be loaded because symbol path is not initialized. *
    * The Symbol Path can be set by: *
    * using the _NT_SYMBOL_PATH environment variable. *
    * using the -y <symbol_path> argument when starting the debugger. *
    * using .sympath and .sympath+ *
    Unable to load image \SystemRoot\system32\ntkrnlpa.exe, Win32 error 0n2
    *** WARNING: Unable to verify timestamp for ntkrnlpa.exe
    *** ERROR: Module load completed but symbols could not be loaded for ntkrnlpa.exe
    Loading Kernel Symbols
    Loading User Symbols
    Loading unloaded module list
    ************* Symbol Loading Error Summary **************
    Module name Error
    ntkrnlpa The system cannot find the file specified
    You can troubleshoot most symbol related issues by turning on symbol loading diagnostics (!sym noisy) and repeating the
    command that caused symbols to be loaded.
    You should also verify that your symbol search path (.sympath) is correct.
    * Bugcheck Analysis *
    Use !analyze -v to get detailed debugging information.
    BugCheck 50, {afa99150, 0, 88c557d7, 0}
    *** WARNING: Unable to verify timestamp for mssmbios.sys
    *** ERROR: Module load completed but symbols could not be loaded for mssmbios.sys
    *** WARNING: Unable to verify timestamp for mfehidk.sys
    *** ERROR: Module load completed but symbols could not be loaded for mfehidk.sys
    *** WARNING: Unable to verify timestamp for HipShieldK.sys
    *** ERROR: Module load completed but symbols could not be loaded for HipShieldK.sys
    ***** Kernel symbols are WRONG. Please fix symbols to do analysis.
    *** Either you specified an unqualified symbol, or your debugger ***
    *** doesn't have full symbol information. Unqualified symbol ***
    *** resolution is turned off by default. Please either specify a ***
    *** fully qualified symbol module!symbolname, or enable resolution ***
    *** of unqualified symbols by typing ".symopt- 100". Note that ***
    *** enabling unqualified symbol resolution with network symbol ***
    *** server shares in the symbol path may cause the debugger to ***
    *** appear to hang for long periods of time when an incorrect ***
    *** symbol name is typed or the network symbol server is down. ***
    *** For some commands to work properly, your symbol path ***
    *** must point to .pdb files that have full type information. ***
    *** Certain .pdb files (such as the public OS symbols) do not ***
    *** contain the required information. Contact the group that ***
    *** provided you with these symbols if you need this command to ***
    *** work. ***
    *** Type referenced: nt!_KPRCB ***
    *** Either you specified an unqualified symbol, or your debugger ***
    *** doesn't have full symbol information. Unqualified symbol ***
    *** resolution is turned off by default. Please either specify a ***
    *** fully qualified symbol module!symbolname, or enable resolution ***
    *** of unqualified symbols by typing ".symopt- 100". Note that ***
    *** enabling unqualified symbol resolution with network symbol ***
    *** server shares in the symbol path may cause the debugger to ***
    *** appear to hang for long periods of time when an incorrect ***
    *** symbol name is typed or the network symbol server is down. ***
    *** For some commands to work properly, your symbol path ***
    *** must point to .pdb files that have full type information. ***
    *** Certain .pdb files (such as the public OS symbols) do not ***
    *** contain the required information. Contact the group that ***
    *** provided you with these symbols if you need this command to ***
    *** work. ***
    *** Type referenced: nt!_KPRCB ***
    *** Either you specified an unqualified symbol, or your debugger ***
    *** doesn't have full symbol information. Unqualified symbol ***
    *** resolution is turned off by default. Please either specify a ***
    *** fully qualified symbol module!symbolname, or enable resolution ***
    *** of unqualified symbols by typing ".symopt- 100". Note that ***
    *** enabling unqualified symbol resolution with network symbol ***
    *** server shares in the symbol path may cause the debugger to ***
    *** appear to hang for long periods of time when an incorrect ***
    *** symbol name is typed or the network symbol server is down. ***
    *** For some commands to work properly, your symbol path ***
    *** must point to .pdb files that have full type information. ***
    *** Certain .pdb files (such as the public OS symbols) do not ***
    *** contain the required information. Contact the group that ***
    *** provided you with these symbols if you need this command to ***
    *** work. ***
    *** Type referenced: nt!_KPRCB ***
    Probably caused by : mfehidk.sys ( mfehidk+377d7 )
    Followup: MachineOwner
    1: kd> kd: Reading initial command '!analyze -v;q'
    * Bugcheck Analysis *
    PAGE_FAULT_IN_NONPAGED_AREA (50)
    Invalid system memory was referenced. This cannot be protected by try-except,
    it must be protected by a Probe. Typically the address is just plain bad or it
    is pointing at freed memory.
    Arguments:
    Arg1: afa99150, memory referenced.
    Arg2: 00000000, value 0 = read operation, 1 = write operation.
    Arg3: 88c557d7, If non-zero, the instruction address which referenced the bad memory
    address.
    Arg4: 00000000, (reserved)
    Debugging Details:
    ***** Kernel symbols are WRONG. Please fix symbols to do analysis.
    *** Either you specified an unqualified symbol, or your debugger ***
    *** doesn't have full symbol information. Unqualified symbol ***
    *** resolution is turned off by default. Please either specify a ***
    *** fully qualified symbol module!symbolname, or enable resolution ***
    *** of unqualified symbols by typing ".symopt- 100". Note that ***
    *** enabling unqualified symbol resolution with network symbol ***
    *** server shares in the symbol path may cause the debugger to ***
    *** appear to hang for long periods of time when an incorrect ***
    *** symbol name is typed or the network symbol server is down. ***
    *** For some commands to work properly, your symbol path ***
    *** must point to .pdb files that have full type information. ***
    *** Certain .pdb files (such as the public OS symbols) do not ***
    *** contain the required information. Contact the group that ***
    *** provided you with these symbols if you need this command to ***
    *** work. ***
    *** Type referenced: nt!_KPRCB ***
    *** Either you specified an unqualified symbol, or your debugger ***
    *** doesn't have full symbol information. Unqualified symbol ***
    *** resolution is turned off by default. Please either specify a ***
    *** fully qualified symbol module!symbolname, or enable resolution ***
    *** of unqualified symbols by typing ".symopt- 100". Note that ***
    *** enabling unqualified symbol resolution with network symbol ***
    *** server shares in the symbol path may cause the debugger to ***
    *** appear to hang for long periods of time when an incorrect ***
    *** symbol name is typed or the network symbol server is down. ***
    *** For some commands to work properly, your symbol path ***
    *** must point to .pdb files that have full type information. ***
    *** Certain .pdb files (such as the public OS symbols) do not ***
    *** contain the required information. Contact the group that ***
    *** provided you with these symbols if you need this command to ***
    *** work. ***
    *** Type referenced: nt!_KPRCB ***
    *** Either you specified an unqualified symbol, or your debugger ***
    *** doesn't have full symbol information. Unqualified symbol ***
    *** resolution is turned off by default. Please either specify a ***
    *** fully qualified symbol module!symbolname, or enable resolution ***
    *** of unqualified symbols by typing ".symopt- 100". Note that ***
    *** enabling unqualified symbol resolution with network symbol ***
    *** server shares in the symbol path may cause the debugger to ***
    *** appear to hang for long periods of time when an incorrect ***
    *** symbol name is typed or the network symbol server is down. ***
    *** For some commands to work properly, your symbol path ***
    *** must point to .pdb files that have full type information. ***
    *** Certain .pdb files (such as the public OS symbols) do not ***
    *** contain the required information. Contact the group that ***
    *** provided you with these symbols if you need this command to ***
    *** work. ***
    *** Type referenced: nt!_KPRCB ***
    ADDITIONAL_DEBUG_TEXT:
    You can run '.symfix; .reload' to try to fix the symbol path and load symbols.
    MODULE_NAME: mfehidk
    FAULTING_MODULE: 82e3e000 nt
    DEBUG_FLR_IMAGE_TIMESTAMP: 4d2e1e3e
    READ_ADDRESS: GetPointerFromAddress: unable to read from 00000000
    GetPointerFromAddress: unable to read from 00000000
    unable to get nt!MmSpecialPoolStart
    unable to get nt!MmSpecialPoolEnd
    unable to get nt!MmPagedPoolEnd
    unable to get nt!MmNonPagedPoolStart
    unable to get nt!MmSizeOfNonPagedPoolInBytes
    afa99150
    FAULTING_IP:
    mfehidk+377d7
    88c557d7 0fb70c06 movzx ecx,word ptr [esi+eax]
    MM_INTERNAL_CODE: 0
    CUSTOMER_CRASH_COUNT: 1
    DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT
    BUGCHECK_STR: 0x50
    CURRENT_IRQL: 0
    ANALYSIS_VERSION: 6.3.9600.17298 (debuggers(dbg).141024-1500) x86fre
    LAST_CONTROL_TRANSFER: from 82e7eaa8 to 82ecb879
    STACK_TEXT:
    WARNING: Stack unwind information not available. Following frames may be wrong.
    ad0baf90 82e7eaa8 00000000 afa99150 00000000 nt+0x8d879
    ad0bafa8 88c557d7 badb0d00 00000000 88c4ceb0 nt+0x40aa8
    ad0bb040 88c4f97d 001a99b0 afa91000 00000000 mfehidk+0x377d7
    ad0bb090 88c52b16 00770220 ad0bb0fc 00000010 mfehidk+0x3197d
    ad0bb0bc 98d5fb73 ae770220 ad0bb0fc 00000010 mfehidk+0x34b16
    ad0bb140 98d5fc43 ae738c30 98d6b62a aace7220 HipShieldK+0xb73
    ad0bb168 98d6b882 ad0bb19c 00000000 98d77b44 HipShieldK+0xc43
    ad0bb1b8 98d631a9 00000bd4 0000102c ad0bb208 HipShieldK+0xc882
    ad0bb330 88c47795 00000bd4 0000102c ad0bb401 HipShieldK+0x41a9
    ad0bb400 88c22b57 0000102c ad0bb460 85b3dee0 mfehidk+0x29795
    ad0bb41c 88c232c6 ad0bb430 0000000c 8c4b6ce0 mfehidk+0x4b57
    ad0bb43c 830a5acb adb6b9b8 0000102c ad0bb460 mfehidk+0x52c6
    ad0bb4f4 830adaf8 adb16030 01b6b9b8 ad0bb550 nt+0x267acb
    ad0bbc00 82e7b8c6 038ae710 038ae6ec 02000000 nt+0x26faf8
    ad0bbc34 77a470f4 badb0d00 038ae3dc 00000000 nt+0x3d8c6
    ad0bbc38 badb0d00 038ae3dc 00000000 00000000 0x77a470f4
    ad0bbc3c 038ae3dc 00000000 00000000 00000000 0xbadb0d00
    ad0bbc40 00000000 00000000 00000000 00000000 0x38ae3dc
    STACK_COMMAND: kb
    FOLLOWUP_IP:
    mfehidk+377d7
    88c557d7 0fb70c06 movzx ecx,word ptr [esi+eax]
    SYMBOL_STACK_INDEX: 2
    SYMBOL_NAME: mfehidk+377d7
    FOLLOWUP_NAME: MachineOwner
    IMAGE_NAME: mfehidk.sys
    BUCKET_ID: WRONG_SYMBOLS
    FAILURE_BUCKET_ID: WRONG_SYMBOLS
    ANALYSIS_SOURCE: KM
    FAILURE_ID_HASH_STRING: km:wrong_symbols
    FAILURE_ID_HASH: {70b057e8-2462-896f-28e7-ac72d4d365f8}
    Followup: MachineOwner
    quit:
    output when run in my app:-
    Microsoft (R) Windows Debugger Version 6.3.9600.17298 X86
    Copyright (c) Microsoft Corporation. All rights reserved.
    Loading Dump File [C:\Windows\MiniDump\042414-24632-01.dmp]
    Mini Kernel Dump File: Only registers and stack trace are available
    Symbol search path is: *** Invalid ***
    * Symbol loading may be unreliable without a symbol search path. *
    * Use .symfix to have the debugger choose a symbol path. *
    * After setting your symbol path, use .reload to refresh symbol locations. *
    Executable search path is:
    * Symbols can not be loaded because symbol path is not initialized. *
    * The Symbol Path can be set by: *
    * using the _NT_SYMBOL_PATH environment variable. *
    * using the -y <symbol_path> argument when starting the debugger. *
    * using .sympath and .sympath+ *
    Unable to load image \SystemRoot\system32\ntkrnlpa.exe, Win32 error 0n2
    *** WARNING: Unable to verify timestamp for ntkrnlpa.exe
    *** ERROR: Module load completed but symbols could not be loaded for ntkrnlpa.exe
    Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x86 compatible
    Product: WinNt, suite: TerminalServer SingleUserTS
    Built by: 7601.18205.x86fre.win7sp1_gdr.130708-1532
    Machine Name:
    Kernel base = 0x82e3e000 PsLoadedModuleList = 0x82f874d0
    Debug session time: Thu Apr 24 13:36:18.672 2014 (UTC + 1:00)
    System Uptime: 0 days 0:00:38.703
    * Symbols can not be loaded because symbol path is not initialized. *
    * The Symbol Path can be set by: *
    * using the _NT_SYMBOL_PATH environment variable. *
    * using the -y <symbol_path> argument when starting the debugger. *
    * using .sympath and .sympath+ *
    Unable to load image \SystemRoot\system32\ntkrnlpa.exe, Win32 error 0n2
    *** WARNING: Unable to verify timestamp for ntkrnlpa.exe
    *** ERROR: Module load completed but symbols could not be loaded for ntkrnlpa.exe
    Loading Kernel Symbols
    Loading User Symbols
    Loading unloaded module list
    ************* Symbol Loading Error Summary **************
    Module name Error
    ntkrnlpa The system cannot find the file specified
    You can troubleshoot most symbol related issues by turning on symbol loading diagnostics (!sym noisy) and repeating the
    command that caused symbols to be loaded.
    You should also verify that your symbol search path (.sympath) is correct.
    * Bugcheck Analysis *
    Use !analyze -v to get detailed debugging information.
    BugCheck 50, {afa99150, 0, 88c557d7, 0}
    *** WARNING: Unable to verify timestamp for mssmbios.sys
    *** ERROR: Module load completed but symbols could not be loaded for mssmbios.sys
    *** WARNING: Unable to verify timestamp for mfehidk.sys
    *** ERROR: Module load completed but symbols could not be loaded for mfehidk.sys
    *** WARNING: Unable to verify timestamp for HipShieldK.sys
    *** ERROR: Module load completed but symbols could not be loaded for HipShieldK.sys
    ***** Kernel symbols are WRONG. Please fix symbols to do analysis.
    *** Either you specified an unqualified symbol, or your debugger ***
    *** doesn't have full symbol information. Unqualified symbol ***
    *** resolution is turned off by default. Please either specify a ***
    *** fully qualified symbol module!symbolname, or enable resolution ***
    *** of unqualified symbols by typing ".symopt- 100". Note that ***
    *** enabling unqualified symbol resolution with network symbol ***
    *** server shares in the symbol path may cause the debugger to ***
    *** appear to hang for long periods of time when an incorrect ***
    *** symbol name is typed or the network symbol server is down. ***
    *** For some commands to work properly, your symbol path ***
    *** must point to .pdb files that have full type information. ***
    *** Certain .pdb files (such as the public OS symbols) do not ***
    *** contain the required information. Contact the group that ***
    *** provided you with these symbols if you need this command to ***
    *** work. ***
    *** Type referenced: nt!_KPRCB ***
    *** Either you specified an unqualified symbol, or your debugger ***
    *** doesn't have full symbol information. Unqualified symbol ***
    *** resolution is turned off by default. Please either specify a ***
    *** fully qualified symbol module!symbolname, or enable resolution ***
    *** of unqualified symbols by typing ".symopt- 100". Note that ***
    *** enabling unqualified symbol resolution with network symbol ***
    *** server shares in the symbol path may cause the debugger to ***
    *** appear to hang for long periods of time when an incorrect ***
    *** symbol name is typed or the network symbol server is down. ***
    *** For some commands to work properly, your symbol path ***
    *** must point to .pdb files that have full type information. ***
    *** Certain .pdb files (such as the public OS symbols) do not ***
    *** contain the required information. Contact the group that ***
    *** provided you with these symbols if you need this command to ***
    *** work. ***
    *** Type referenced: nt!_KPRCB ***
    *** Either you specified an unqualified symbol, or your debugger ***
    *** doesn't have full symbol information. Unqualified symbol ***
    *** resolution is turned off by default. Please either specify a ***
    *** fully qualified symbol module!symbolname, or enable resolution ***
    *** of unqualified symbols by typing ".symopt- 100". Note that ***
    *** enabling unqualified symbol resolution with network symbol ***
    *** server shares in the symbol path may cause the debugger to ***
    *** appear to hang for long periods of time when an incorrect ***
    *** symbol name is typed or the network symbol server is down. ***
    *** For some commands to work properly, your symbol path ***
    *** must point to .pdb files that have full type information. ***
    *** Certain .pdb files (such as the public OS symbols) do not ***
    *** contain the required information. Contact the group that ***
    *** provided you with these symbols if you need this command to ***
    *** work. ***
    *** Type referenced: nt!_KPRCB ***
    Probably caused by : mfehidk.sys ( mfehidk+377d7 )
    Followup: MachineOwner
    Darren Rose

    Try it by opening the Cmd prompt as the actual process and passing the Filename and its arguments as the arguments of the Cmd process.  If you notice there is a "-C" before the Filename and Arguments in this example.  The "-C"
    tells the cmd to execute the commands and then close itself.  You can also use a "-K" which tells the cmd to execute the commands and keep itself open.  Being you are not showing the cmd window you don`t want to keep it opened because the
    user can`t close it so, that is why i used "-C".
     I don`t have the program so, you can just experiment to see what it does.  Maybe you should try using "-K" and show the cmd window by commenting out the CreateNoWindow line so you can see what is in the cmd window while testing.
    Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
    Dim filepath As String = """C:\Program Files (x86)\Windows Kits\8.1\Debuggers\x86\kd"""
    Dim args As String = " -z C:\windows\minidump\042414-24632-01.dmp -c ""!analyze –v;q"""
    Dim p As New Process
    With p.StartInfo
    .FileName = "cmd.exe"
    .Arguments = "-c " & filepath & args
    .UseShellExecute = False
    .CreateNoWindow = True
    .RedirectStandardOutput = True
    End With
    p.Start()
    TextBox1.Text = p.StandardOutput.ReadToEnd
    End Sub
    If you say it can`t be done then i`ll try it

  • Missing EXIF data when PRINTING jpeg using Print or Slideshow Module (LR2)

    Folks,
    Is there a way to have LR2 include EXIF information when you create a JPG via the Print or Slideshow Module? The EXIF data is present if I export via the Library Module.
    However, if I "print" a jpeg either under the Slideshow or Print Module, most of the EXIF data particularly the camera info is missing.
    Thanks for your help.
    Jg

    Thanks Bob. I believe I have tried that...when you print to jpeg you have option where to save and I save to same folder and then re-synchronize folder in lightroom. Then I try to synchronized metadata between the original file and the new jpeg but the camera and other exif does not transfer over. The title, caption and copyright does work but your basic info such as camera, ISO, lens, f stop and shutter speed are missing
    Regards,
    Paul

  • What exactly is using data and how can i keep it from using data when im not using my phone?

    So i have an iphone 4 and i have used a lot of data this month(like almost 2GB) and i have barely touched my phone outside of wifi areas. I always shut down any apps that use data like youtube, funnypics, facebook, etc. but i do play some games during my breaks at work but they dont require data to play so to my knowledge those games arent using data(or are they?) i just need some help figuring out exactly what on my phone is using data all the time so i can turn it off. Is it icloud? Emails on auto update? Offline game apps(minecraft, sonic dash, the Mr. Series games?) Do all apps use data regardless? Somebody please answer me. And No im not buying a bigger data plan. 2GB is my limit but it seems as though i am hitting that easily with my iphone but the rest of my familyis usually miles away from 2GB and they all have Samsung Galaxy S4s.

    My first stop would be in Settings > Cellular if you are on iOS 7.  This has a lot of goodstuff. you can turn off cellular data as a who, see your current usage and even see which apps have used data and how much.  You can even turn off individual apps form using cellular data (restricting them to wifi only).
    I hope this helps!

  • Does the AppleTV download data when not in use?

    Im stuck with a throttled satellite connection. 7.5GB over 30 days. Ive never come close to hitting it.
    Something on the LAN seems to be sucking down data regularly and I can't pinpoint it.
    Could it be the AppleTV?
    I use it very rarely and only to airplay from other computers in the house, never to stream from internet.
    I see its light come on regularly for a short period.
    Is it downloading updates, data, content etc. during those times?

    Basically it is just network talking to each other.. not internet.
    But the best way is leave the TC plugged in and check your usage overnight.. most of the traffic will be internal network. Some ISP have slow meters and reporting so it could be best to track it over a few days.
    Make sure your wireless is secured.. that is far more important issue than worrying about traffic via the router.

  • How to set the time difference between each data when sweeping voltage using keithley 2400

    Hello friends,
    I am using the sweep vi from Keithley in the SWEEP and Acquire measurement vi.I want to measure the voltage for every step and insert a delay in between every two data, so I need some delay between each I step.
    I am a starter to use Labview, thanks so much for your answers.
    Perry
    Solved!
    Go to Solution.
    Attachments:
    Keithley 24XX Sweep and Acquire Measurements.vi ‏26 KB

    As Dennis said, if you're using the built-in sweep function, you'll have to check the manual. See Section 10-16 (That's section 10 page 16, not sections 10 though 16) of the Keithley 2400 User Manual.
    The Keithley 24xx series has a measurement speed in units called PLC (Power Line Cycles). The default speed is 1PLC, meaning a measurement is taken every 1 power line cycle, or 1/60th of a second (16.67ms). 24XX's can go from 0.01 PLC (every 0.16ms) to 10 PLC (every 166.6ms). The faster you measure, the lower precision you get.
    To set this value programmatically, the command is
    ENSe:CURRent:NPLCycles <n>
    ENSe:VOLTage:NPLCycles <n>
    depending on what you're sensing and where <n> is the number of PLCs from 0.01 to 10.
    Another factor that will determine the time between data points is the SDM cycle. These are more complicated, look at your Keithley user manual for more information. Look at Section 6 and Section 11 for more info.
    Note:
    PLC times are based on a US cycle of 60Hz.

  • BEx: V 3.5: Structures: Duplication of data when structure is used.

    Good day
    I have searched SDN already, but could not find an anser for my issue.
    I have created a Structure in columns which include the characteristic "Model Key" as follows:
    BUS = Model Keys (BUS and CVLA)
    FUSO = Model Keys (MCTR and MFUS)
    In the query results the user would like to see the key figure results per the structure = BUS and FUSO, but still wants to see the detail of the characteristic "Model Key". Thus the results should be:
    STRUCTURE:   MODEL KEY:   Keyfigure 1:   
    BUS             :    BUS            :    20
    BUS             :   CVLA           :     1
    FUSO           :    MCTR          :     10
    FUSO            :   MFUS          :      4
    But what the query is returning is:
    STRUCTURE:   MODEL KEY:   Keyfigure 1: 
    BUS             :    BUS            :    20
    BUS             :   CVLA           :     1
    BUS              :   MCTR          :    
    BUS               :  MFUS          :
    FUSO           :    MCTR          :     10
    FUSO            :   MFUS          :      4
    FUSO            :    BUS           :    
    FUSO            :    CVLA         :  
    Why is it returning the extra lines (line 3,4 and 7 and 8)?
    Thanks for your time.
    Have a nice day
    Cj

    That is the standard operation with structures. If you have a structure and add a drill down by a characterisitic, all values are displayed.

  • Principals set empty when wlclient.jar used instead of weblogic.jar

    Hi,
    I have a swing client that makes use of JAAS for security.
    When I use weblogic.jar in classpath the client works perfectly. But if I use wlclient.jar in classpath the LoginContext.login() is working fine, loginContext.getSubject() is working fine, but subject.getPrincipals() is returning a empty set. I will be using this principals to display different screens for different principals. Does any one what the solution is?
    Thanks in advance
    Danny

    With the thin client jars there is no current programmatic way that a client could ever retrieve the principals.
    Thin client uses IIOP internally and so this is currently not possible

  • Hello! I want to set up an appointement with Genius Bar but when i choose the available date and try to confirm there is this message appears : We're sorry. There was an error processing your request. Click OK to try again. HELP ME PLEASE

    Hello! I want to set up an appointement with Genius Bar but when i choose the available date and try to confirm there is this message appears : We're sorry. There was an error processing your request. Click OK to try again. HELP ME PLEASE

    I have called the store with the same problem but the answer is this must be done on line. I was told to use a different browser but it has made no difference - I am still having the same problem

  • I am trying to install MasterCollection_CS6_LS16. When I click the install file I get this error message: We've encountered the following issues. Installation on case-sensitive volumes is not supported. Please choose a different volume for installation.

    I am trying to install MasterCollection_CS6_LS16. When I double click the install file I get this error message: We've encountered the following issues. Installation on case-sensitive volumes is not supported. Please choose a different volume for installation. What does that mean? How should I proceed?

    Hey iraravitz,
    Could you please let me know what version of OS are working on.
    You might receive this error when you attempt to install on a drive with the HFS+ Case Sensitive file system, which is not supported for installation of Adobe Creative Suite 6.
    So, please try installing on a drive that has been formatted with a supported file system.
    You might refer the KB doc link mentioned below for the same:
    Error "Case-sensitive drives not supported" or similar install error | Mac OS
    Let me know if this helps.
    Regards,
    Anubha

Maybe you are looking for