ICal Date Headings Missing from Day and Week Views

Good morning,
A few days ago, the date headings disappeared from the Day and Week views in iCal. I can see the date heading in Month view, but when I switch back, the dates are missing. All of my events are there, and correct.
I have resolved font duplications and restarted iCal, to no avail.
Thanks for your help.
W

Still no date headings when my calendar is views in the Day and Week views. All of my appointments are there. The days of the month appear in Month view. But when I change to week or day, I don't know what day I'm looking at because there are no dates. Only "2010" appears in the upper left.
Any ideas? I couldn't be the only one this has happened to!
Thanks, Wendy

Similar Messages

  • ICal events disappear only in Day and Week views

    Using iCal 3.0.2, I have suddenly acquired a new behavior. Several "subscribed" calendars appear fine in Month view, but their events do not appear in Day or Week view.
    I have deleted Caches > com.Apple.iCal and I have deleted Libraries > Calendars > Calendar Cache. Neither has had any effect. I also tried deleting Preferences > com.Apple.iCal.
    Any ideas on how to be able to see these events in the Day or Week views?
    Thanks very much,
    Gus

    Still no date headings when my calendar is views in the Day and Week views. All of my appointments are there. The days of the month appear in Month view. But when I change to week or day, I don't know what day I'm looking at because there are no dates. Only "2010" appears in the upper left.
    Any ideas? I couldn't be the only one this has happened to!
    Thanks, Wendy

  • IOS 6 installed data wiped/ missing from itouch and iPhone, help

    Just installed latest software.
    iOS 6 installed, data wiped/ missing from itouch and iPhone on calendars and contacts.  help

    Restore from backup. See:
    iOS: How to back up
    If you restore via iTunes make sure that all the apps are in the iTunes library since they are not in the backup.
    You can redownload iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • Wrong month displayed in day and week views

    I recently noticed that whereas the current month is displayed correctly in Month view, in Day and Week view the date is displayed as in January. This has been the case in both February and now March.
    I sync my iCal with my mobileme account and my iphone and these don't have the same problem.
    I have removed my com.apple.iCal.plist file and rebooted, to no avail.
    Any suggestions what else I can do?

    Thank you so much Ferd II
    I kick myself. Though too my mind it is not logical to look inside Language & Text for a problem with month names. I forgot that last month I changed the date format to yyyymmdd in order to make it more logical sorting things. I have now reverted to day of week, day of month, month, year, and everything seems fine.

  • Seeing times in day and week view

    Is it possible to see times (eg 7.00am, 7.30am, 8.00am, 8.30am, 9.00am, etc etc) along the y axis in day and week view of iCal? I can only see actual times when I in the process of making appointments, ie when wiping my cursor over a section of the page.
    johnC

    See Fred Grieve's answer and John Maisey's solution here:
    http://discussions.apple.com/thread.jspa?threadID=1868347&tstart=0

  • Adding reminders to my calendar items is no longer an option after the software upgrade.  I also can't get to day and week view, only month view.  What's a possible solution?

    Adding reminders to my calendar items is no longer an option after the software upgrade.  I also can't get to day and week view, only month view.  What's a possible solution?  I'm using Andriod version 4.4.2 with kernal 3.4.0.

        @MaloneTP
    Thanks for keeping me updated!  Do you see the screen options displayed in the following link: http://bit.ly/T2koBL for changing the calendar view options in Kies Air?  Also, let me know if you're able to add a Reminder by following these steps: http://bit.ly/T2l9dY.  Keep me posted.  Thanks!
    AnthonyTa_VZW
    Follow us on Twitter @VZWSupport

  • Determining Hours Displayed in Day and Week View

    Hi there,
    Even though I have determined the Day hours to be, for example, 7am to 6pm in iCal Preferences, and I have determined the number of hours to be shown on the screen to be, for example, 11 hours, I still have to scroll down to fit my Day's hours in the view. In addition, the non-day hours (i.e. midnight to 7am, 6pm to midnight) are still being shown.
    Is there any way of removing the non-day hours, and in effect the scrollbar so that on opening iCal, the correct hours as I have determined them are displayed?
    Why would I want to open my Day or Week view and have at the top (what I would expect to be the first thing of my "Day") to in fact be Midnight (and go back to sleep)?
    Am I missing something or does this not work the way I think it should, or thought it did?

    See Fred Grieve's answer and John Maisey's solution here:
    http://discussions.apple.com/thread.jspa?threadID=1868347&tstart=0

  • Calendar in List view different from Day and Month view

    When I look at my Calendar in 'List' view all of the Birthdays and Events are in the wrong date but in 'Day' and 'Month' view they are correct. 
    Has anybody found a fix for this yet?  I have looked at similar discussions but they are all a couple of years old and none seem to have found the solution

    It looks like I have found a solution - it is to do with the birthday dates - if you delete the year of any pre-1932 birthdays it solves the problem! 

  • View iCal's day and week view in reverse chronological order

    Greetings iCalers,
    When I think about day/week calendars, with the Y-axis being times of the day as in iCal's day/week views (e.g. "3:00 AM", and "5:00 PM" are in the leftmost column), I think about times building up to midnight from the bottom—i.e. the day starts at 12:00 AM on the bottom, with 1:00 AM above that, and the day ends with 11:59 PM on the top. I've learned that this intuition is atypical, and all calendaring systems I've come across work in the reverse direction, in line with the majority of people's intuitions.
    I'm wondering if there's a way to get iCal to display in the reverse-chronological order. I suspect there isn't, and I've never seen a terminal command or apple script for it, but I'm hoping there is. If anyone know and could post it here, that would be great!
    Thanks!
    -Scott
    Message was edited by: scottclayton

    It's cool, I figured out a solution: get over it and stop worrying about trivial issues to the point of excessive fussiness.

  • How can I see times in 15 minute increments in day and week views in lightning?

    I have many events that are less than an hour in length. Is thre any way to have lightning show times on the left side in 15 minute intervals instead of 60?

    I have many events that are less than an hour in length. Is thre any way to have lightning show times on the left side in 15 minute intervals instead of 60?

  • Imported ical from outlook and the date across the top of the weekly view all show the date i imported..

    imported ical from outlook and the date across the top of the weekly view all show the date i imported..

    I'm confused, what does iCal have to do with this, it seems as though you went from Outlook to Entourage, is that correct?

  • Get week ending date from Year and Week Number

    I would like to display the week ending date in a Report.
    My dataset query has grouped the results by year and week number, so I am trying to construct the week ending date from year and week number.

    Week end date can be got as below
    =DateAdd(DateInterval.WeekOfYear,CInt(Fields!WeekNumber.Value) -1,DateAdd(DateInterval.Year,(Cint(Fields!Year.Value) - 1900),CInt("12/31/1899")))
    Please Mark This As Answer if it solved your issue
    Please Vote This As Helpful if it helps to solve your issue
    Visakh
    My Wiki User Page
    My MSDN Page
    My Personal Blog
    My Facebook Page

  • My icons are missing from finder and Safari.

    Not sure what I have done. My icons are missing from finder and Safari, tired the customise tool bar option with no joy,   please help.

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
     Cheers, Tom

  • TS1717 try to open and says program can't start because MSVCR80.dll is missing from computer and says windows error 126

    try to open itunes on my computer and get messageprogram can't start because MSVCR80.dll is missing from computer and a windows error 126 comes up

    Hi arw8669,
    If you are having issues with iTunes after an attempted update, you may find the following article helpful:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Regards,
    - Brenden

  • How to bulk import data into CQ5 from MySQL and file system

    Is there an easy way to bulk import data into CQ5 from MySQL and file system?  Some of the files are ~50MB each (instrument files).  There are a total of ~1,500 records spread over about 5 tables.
    Thanks

    What problem are you having writing it to a file?
    You can't use FORALL to write the data out to a file, you can only loop through the entries in the collection 1 by 1 and write them out to the file like that.
    FORALL can only be used for SQL statements.

Maybe you are looking for

  • How to on Debugging Mode for T-Code F110 from Script in Sub routine Pool Pr

    Hi Every one.... I have done SAP-Script for Payment Vocher for T-code F110 ..I have a Sub Routine Program where I have few Form statements which is called by SAP - Script using Perform Statements, But my problem is when I set a break point in Sub Rou

  • Photoshop Elements 7 and Panasonic Raw images

    I recently bought a Panasonic Luminex partly in order to shoot RAW images. My research told me that Photoshop Elements 6 and above would accept it. My PE 7 is telling me, however, that it cannot open the image because it is the wrong kind of file. An

  • Cant Open Any Adobe File anymore

    None of my adobe files will open.  They just give some version of "cannot find  c:\program files (x86)\adobe\Reader 11.0\reader\acrord32.exe"  (example) I have AVG installed and I did also have Ad Aware and AVG PC Tune Up but those last to are histor

  • Setting font of a column headers

    Hi! How can I set a font (size,color, etc.) of column headers in tabular form? Tom

  • Fetching the Inspection plan from OEM/owning Plant while doing GR in MIGO

    Hi, I have a scenario- a) I am doing a Goods Recipt against a purchase order for a plant(suppose Plant A). b) I have to fetch the Inspection Plan from the Owning OEM(suppose Plant B) of the material. At present we are maintaining the inspection plan