ICal delegates automatically selected

Hi,
among my several calendars I configured an account on Exchange 2010 with some delegates (five). Now when I open I cal, some of these delegates (usually one or two) are automatically selected (the tick to show then is turned on). I can the 'untick' them and after a couple of day they are reselected automatically. It is not a huge a problem but it pretty annoying to have the agenda cluttered with items which I do not want to see per default (but just when I choose to see them).
Any hint?
Many thanks
Matteo

I have exactly the same problem. The CalDAV sync with google works great, but only my primary events show up when syncing with iPhone. I prefer this way of syncing since I find the direct sync with google cal killing my battery, so I would really appreciate a solution!

Similar Messages

  • ICal Delegates Unreliable - Time Out

    I've got three users from about 50 who are having this particular issue.
    All are on Lion.
    The iCal Server is Leopard.
    Not all have the issue with the same delegated calendars.
    The situation:
    Person A delegates access to their calendar to Person B. Read Only.
    Person B has been granted delegation access by about ten others as well. We'll say Person(s) C, D, E, etc. Read Only.
    Person B goes into iCal preferences and selects the checkbox to view Person A, C, D, E, etc.
    The delegation for Person(s) C, D, E, etc. show up without fail.
    The delegation for Person A gets the "!" mark and doesn't display.
    Person B can still invite Person A to meetings.
    Person A has no problem seeing the delegation of Person B's calendar.
    Person B can still see available meeting times for Person A when creating the event and clicking on "Check Available Meeting Times".
    There are two delegations Person B has this issue with.
    What I've tried:
    On the original box, I've:
    deleted preferences
    deleted local calendars
    deleted and re-added accounts
    had Person A delete and re-delegate access to Person B.
    On my machine, I've:
    Set up my iCal as if I was Person B. Things work fine consistently.
    On a new machine, I've:
    Set up Person B's calendar, it works sometimes but others it doesn't.
    Sometimes I need to deselect the delegation in the preferences and reselect it.
    Sometimes I need to deselect the delegation, quit iCal, and then restart iCal, re-add the delegation.
    Errors I've found:
    I've looked in the console log on the new box and found:
    2/1/12 9:24:11.062 AM iCal: Account refresh failed with error: Error Domain=NSURLErrorDomain Code=-1001 "The request timed out." UserInfo=0x7fdb0d428bc0 {NSLocalizedDescription=The request timed out., NSErrorFailingURLStringKey=http://username@domainname:8008/calendars/__uids__/DAB5A067-6E27-4F94-8367-CF3C7 40C8650/calendar/, NSErrorFailingURLKey=http://username@domainname:8008/calendars/__uids__/DAB5A067-6E27-4F94-8367-CF3C7 40C8650/calendar/, AccountName="User Name of the Calendar Delegation that Fails", CalDAVErrFromRefresh=YES, NSUnderlyingError=0x7fdb0e8bef40 "The request timed out."}
    On the original box, in the console log, I found that Person B's iCal was trying to find a calendar that doesn't exist (the error was different) and the UID being sought is not one I've been able to find. Its really out of whack there!
    Any thoughts would be greatly appreciated! This is one of three "big" issues I'm trying to resolve right now.

    Daft?
    I suspect a time zone setting (on your Mac or T610)
    If that doesn't solve it, you might want to try at the iSync discussion.

  • Automatically Selecting Values in Multiple Values Dropdown Parameters

    Hi,
    Is it possible to have parameter values automatically selected in a dropdown in an SSRS report?  I'm using SQL Server 2008 R2 Enterprise edition.  Basically what I have in mind is this:  The user wants to save his parameter selections in a
    table that will be available as a dropdown parameter of a report, call it
    ParamUserSelection.  ParamUserSelection is the first parameter of the report and other parameters depend on it.
    We have two other parameters called ParamCountry and
    ParamState.  These are dropdown text parameters that allow multiple values to be selected.  Populating the list is not a problem as I use a standard cascading parameter technique.  What I'm trying to do is the following:
    The user selects a value from ParamUserSelection, call it Selection1.  Selection1 is stored in a table and has all the values that should be selected in ParamCountry and ParamState.  In other words, it should tell these two subsequent parameters,
    what values should be selected in their respective dropdowns.  For example if the user selects Selection1 from ParamUserSelection, it reads the values in the database table and if it finds US and Canada for countries and CA, NY, ON for states, ParamCountry
    should be populated with all the countries available in the database but should have ONLY US and Canada as selected values and ParamState should be populated with all the states in the database but should have ONLY CA, NY and ON as selected values.
    If then I click on selection 2 and it has ParamCountry = US, ParamState = TX,OH in its database then again all countries and states should be in the dropdown but only US for ParamCountry and TX,OH for ParamState should be selected.
    Is this possible with SSRS?  I've tried using the Default Values tab with a dataset that returns all the selected values under Report Parameters Properties but this only works for the first time that I select ParamUserSelection.  It appears that
    if I change the value of ParamUserSelection again, the default values are not invoked.
    If this is possible, please tell me how to do this as I have been struggling for a day with it.

    Hi Comedian,
    According to your description, you have a report with three parameters (ParamUserSelection, ParamCountry, ParamState). The available value lists of ParamCountry and ParamState are based on the selection of a value for ParamUserSelection. Now you want to
    show all countries and states in their parameter dropdown list when selecting a user selection instead of only showing the cascading values. Right?
    In Reporting Service, when we want a parameter to show the cascading values, we only need to set the corresponding dataset and field for Default Values in this parameter. In this scenario, if we want to show all countries and states in their dropdown list,
    we just need to set another dataset for Available Values in those parameters so they can display all countries and states. We have tested your case in our local environment. Since you have done with the cascading parameters, we just give some part of steps
    and screenshots for your reference:
    We created two tables (dbo.Selection, dbo.states) based on your information.
    Create one more dataset (named dataset2) in your report, put text below into your query:
    select distinct Country from states
    Create another dataset (named dataset3), put text below into your query:
    select distinct State from states
    Go to your ParamCountry, in Available Values, select dataset2 and Country for dataset and field.
    Go to your ParamState, in Available Values, select dataset3 and State for dataset and field.
    Save and preview. It looks like below:
    Reference:
    Report Parameters (Report Builder and SSRS)
    If you have any question, please feel free to ask.
    Best Regards,
    Simon Hou
      

  • Why does my cursor not automatically select the entire word when I try to select text by starting/ending in the middle of a word?

    In any other browser I've used (or word processor, for that matter) when I select text using my mouse cursor, if I start and/or end in the middle of a word, it automatically selects the whole word when I'm selecting more than one word. But for some reason this is not happening in Firefox. If I try to select say 3 words, and I start in the middle of the first word and end in the middle of the last word, it will only select those parts, not all 3 words entirely.

    Firefox allows to select part of a word. You can select a word with a double click and use Shift + left click to set the end of the selection, so you need to click at the end of the last word instead of in it.

  • How do I get my Macbook Pro to automatically select the location when connecting to the wireless network?

    Each time when I want to connect to a different network I have to manually select the location and it's becoming very annoying. How do I get it to automatically select the location?

    Check the following settings on your MacBook
    Open System Preferences (gear icon on the dock)
    Open Network
    Click on AirPort on the left
    Click Advanced at the lower right
    If you have a "favorite" network, make sure it is first in the connection list. If it's not, drag it there
    Make sure that there is a check mark next to "Remember networks this computer has joined"
    No other boxes should be checked
    Click OK, then click Apply

  • Automatic Selection for Combination Order Creation

    Hi
    We are working with MTO scenario where production orders are created against sales order. Production orders will be combined for common items from two sales orders. We have activated the SAP MILL Products DIMP, for this functionality.
    But in MILL_OC, we need to manually input the production order numbers, which we want to combine. Our client's requirement is that the system should select the production orders of common items and combine them automatically (Input will be only 2 Sale order numbers)
    As per below mentioned link, it is possible using a function module MILL_OC_ORDER_MERGE.
    http://help.sap.com/erp2005_ehp_05/helpdata/EN/d2/c79af5651811d385db0000e8200b4c/frameset.htm
    What we are not able to understand is the input required for this FM. Can anyone help?
    If not this, is there any other way, to achieve, automatic selection & combination of common item production orders?

    Hi
    We have resolved this problem by creating a BDC.
    Thread Closed.
    Edited by: OmKarP on Nov 19, 2011 7:49 AM

  • Automatic selection production version in MFBF

    Hello !
    I have a material setted with Selection method = 2(Selection by production version) in Material Master, so, I have two production version: V001 & V002, the last one is locked for any usage. 
    I need automatic selection of production version in MFBF , but when I'm doing the confirmation the system show the screen of  production version selection  with two versions .
    Do you know what is missing for automatic selection works ?
    Thanks a lot.
    Vero

    Hi Vernoica ,
    Good Day , PV will be selected based on the lot size and the creation dates.
    It will copy the PV (BOM & Routing ) based on Lot size or Explosion date you defind in MRP-4 view i.e. BOM selection ,BY -explosion date,1-lot size,2- by PV and 3 by PV only.
    If you would like to get rid the selection of PV,
    why dont you try created a production version than only go to material master change screen MM02 in MRP4 view and Select 2 at selection method field.
    In the IMG (OPLD) for Order Type Dependent Parameters, the production version selection is already set to manual selection.  But the production version is always defaulted as version 1 which is the first one in the material master and is not asking to select the version at the time of converting the planned order to a production order!
    You can also check settings in configue trans OPL8 to have routing selection set to automatic selection if you want to avoid placing routing versions in each individual material master. Just another way to look at it
    Hope it will resolve your problem.

  • Automate selection of Clipping Path?

    I'm trying to create a droplet that will strip out the background of an image using the active Clipping Path regardless of the path's name (similar to the way InDesign automatically selects the active Clipping Path and ignores the other paths. So far I've only managed to automate the selection of a path by name, not by Clipping Path status. Many of the images I work with come from far off lands where they are not simply named "Path 1." Any ideas?

    When you select your pen tool, look up in the options bar. There are four path types. You want the fourth one, which cuts out donut holes. You may be able to simply select the paths and change their type to whichever one will cut out the holes for you, (make them all exclude overlapping, or make the inner paths subtract) or copy/paste them into a new path that was created while the fourth pen tool option was selected.

  • Automatic Selected Item of List Builder Component Does not work (anymore)

    Hi all,
    Í'm working with Xcelsius Engage 2008 (version 5.3.2.0) and the automatic selection of an item at runtime of the list builder component does not work anymore. In a previous version it worked very well.
    Here's the case: at runtime I want that the list builder component automatically puts the first item in the list to the destination section and selects it, so that a graph can show the underlying pushed data. In the previous version it worked o.k., but now at runtime the destination section remains empty at startup. If I interactively select an item from the source section to the destination section and update the list builder, the data is shown correctly, but it must done automatically, which worked o.k. in an earlier version of Xcelsius 2008...
    This are my settings of the list builder component (which was running correctly earlier..):
    -at the general tab I defined a range of labels
    -at the general tab I defined 2 data column insertion series
    -at the behaviour-common tab I defined selected items: position mode; items: the first item of the label list; insert items at runtime
    -all of the data comes from an external xml data source
    You can find an example of the visualisation at: http://onderzoek2.evinet.nl/projecten/10169/dynarap.htm. You will see that at start-up there is no item visible and selected in the destination section of the list builder....
    I've tried every combinations of settings, build up the component from scratch, but its not working (anymore).
    Greetings Erik-Jan Vriens

    Hi njnits,
    Print view button is a standard component of Xcelsius: look at it in the IDE
    Exporting to Powerpoint is also a standard functionality, so yes. For this particular dashboard/report all data resides in an external xml-file which have to be accessible for Powerpoint
    All visualisations, not only the table,  in this/report fetch their data from an external xml-file, but a QaaWS-connection will also do the trick. You will have to write this dedicated service. In our case the xml-data is also generated automatically.
    The external data is best defined as a sort of matrix, consisting of approx. 100 columns by 1000 rows. I agree it takes a lot of Xcelsius but it does the job....
    Hopes this info helps....

  • How to automate selective deletion of ods in process chain

    Hi,
    How can we automate selective deletion of ods in Process chain. I tried with the proceedure. Using T-code "delete_fact" I gave selection parameters and Name of the program and saved this as variant and gave the same program and variant in Process cahin. But it is not deleting data. So plz guide me whether I have missed anything in this proceedure.

    Hi purushottam,
                           you have to give to program variants in the process chain for data deletion to take place. in the first program variant include the rsdrd_delete_facts as program name and in the program variant give a variant for your infoprovider selection.
    Now again select another program variant and include the name of the program which you get after selecting the infoprovider name and  the generate selection program  option in the "program for deleting selected entries from the data target" screen " and press execute.
    again give another variant for your field selection.
    now try execute the process chain.

  • In PowerPivot, can I configure a slicer/timeline to automatically select the recent N days when someone opens the workbook?

    For example, is it possible to let a slicer/timeline automatically select last 7 days whenever someone opens the workbook, so that one can always see the latest data without having to manually click/drag to select the most recent time range. Can I achieve
    this?
    Thanks.

    yes
    Add an extra custom column to the calendar which is called RefreshDate for which the formula is =today().
    Now the rest is up to you as to how you want to do this. You could add a column TodayMinus1  defined as =IF([Date]=[Refresh Date]-1,TRUE,FALSE)
    Personally I would rather have the Refresh date supplied from the database when you connect to refresh.
    Hope That Helps
    Mark

  • E66 automatically 'selects' written text in forms,...

    Dear all,
    My E66 phone is really annoying me. If someone here has no proper solution for this problem, I think it's a problem with my phone only.
    The problem is that, wherever I write, especially when I fill in 'forms', after a while it automatically turns in a mode where I only can select the written text. At that moment I can't just go to the next place to fill in or leave it just like that or save the changes I made. I have to close the whole program or option I am using.
    This happens with for example Nokia Maps by filling in the search options (Place, Address, etc.) and by adding an entry to my calendar. Sometimes I'm already stuck after writing the event-title. The most annoying is getting stuck after writing an SMS. I can't properly delete parts of my message anymore because when I go back with the key it automatically selects the text.
    Has anyone else this same problem? I have the newest firmware, and the problem still exists.
    If there is a solution I really would like to know it. I have already reset my whole phone once and that even didn't help out.
    Greetings Kevin

    I had the same problem on both E51 and E66 after I installed the Garmin GPS Navigator... I unistalled that and everything now works fine.

  • Automatically select entire words in Mavericks?

    In Word 2011 there is the option to "automatically select entire word[s]." Does anyone know if there is a way to enable a similar option for the entirety of text selection in Mavericks?
    Thanks!
    N

    You can double-click and drag (hold down on the second click) to select entire words at a time. Or if you prefer selecting using the keyboard, hold down shift+option while tapping the left or right arrow keys.

  • Lens Profile Not Automatically Selecting Anymore...?

    Hello all,
    I have been using LR3 for a little while and I was excited when the 3.3 update added lens profile support for my last unsupported lens--the newer Tamron 70-300 VC USD. Now, I don't shoot with that lens too much, so I do not have a great number of images since that update, but I SEEM to remember that I tested out a few images and LR3 was correctly choosing lens profile for the 70-300. However, I shot some more images this evening and its not choosing that profile anymore automatically.
    I have done some searching on this forums and tried a few of the troubleshooting steps I found. I have tried to install LR3. No effect. I manually chose the 70-300 profile to ensure that it did have an effect on the picture (so the profile is not missing or anything). And, yes, I am shooting in RAW only, no JPEGs.
    The issue is just that when I load up any images taken with the Tammy 70-300 (all other lens profiles for all my other lenses are loaded automatically), LR3 just gives me the "unable to locate matching profile automatically"
    Any ideas?
    Thanks!!
    F1Fan

    F1Fan2010 wrote:
    Please excuse me for beating a dead horse, but I just want to make sure that I understand. If I manually select the correct profile and then save as default, LR3 will associate all new photos with that correction profile automatically? i.e., I wont have to manually select that profile when I load in new pictures? Is that just working by manually telling LR to associate that profile with this particular *likely faulty or messy* EXIF data set?
    It will save it as the default for that lens and camera combination.
    Fully automatic lens profile selection can only be activated by including a Develop Preset when importing. Fortunately, you need only create one prset a Lr will automatically select the correct profile.

  • How to get Command key to enable/disable only "Automatically select layer..." functionality

    Hi everyone,
    With no updates or preference changes that I know of, PS started working differently for me today. With the Move tool I normally have "Automatically select layer..." option on. I can then select sub-groups in my Layers palette, hold the Command button to temporarily toggle "Automatically select layer..." off, and drag that sub-group around the canvas.
    Today when I toggle the "Automatically select layer..." button on, holding Command temporarily toggles it off.
    But when I toggle the "Automatically select layer..." button off, holding Command changes the "Layer/Group" option next to it.
    Does anyone know why this just started happening or how I can change it back and allow the Command button to temporarily keep sub-groups selected?
    Here's a quick video showing the issue: auto select.mov

    Looks like this is aggravating a ton of people.
    See a more complete thread here: Re: PS CC 2014 Move Tool Bug?
    And the feedback here, with an update from Adobe saying "we're working on it": Photoshop: Move Tool - Toggle auto select shortcut changed

Maybe you are looking for

  • Proper Audio Monitoring

    I'm looking at taking the next step with my setup, so that means proper audio monitoring. Can I get that just by taking the 1/8" audio out from my MacBook Pro, or do I need to go through an external box like a MXO 2 or AJA Express to get proper audio

  • HT4576 I wanted to change my time zone to Boston, MA

    I was wondering why my ipad continued to change the calendar events back to NY,NY. I know it sounds silly to some, but I am a Boston sports fan and it agitates me. I don't see any reason why Boston can't stay there. Can someone help please? Thank you

  • User Priveleges

    How can I check if I have the following priveleges for a specific user in Oracle DB: CREATE SESSION, SELECT_CATALOG_ROLE, SELECT ON SYSTEM.SQLPLUS_PRODUCT_PROFILE, SELECT ON SYS.USER$, SELECT ON SYS.LINK$

  • HT1941 Hi I am having trouble sync my address book on i cloud

    My addres book is not syncing with my iphon and my ipad When I set up my google mail it does not show address book or contacts at all

  • Activating an old phone

    I have been using a Droid Eris for about 9 months.  I can't justify the costs which include a $30 per month data plan.  So, I bought an old Verizon LG off of Craigs List and have been trying to activate it.  The website refuses to recognize it.  I ca