Ical displays the wrong year and date, how do I reset it?

My ical date is currently 2555 BE. I can get to a specific date but I am unable to set it to the correct date. Please help...

it is the Buddhist Cal but I do not know who to change it!  I need help changing it back!

Similar Messages

  • My iphone 3gs has started showing the wrong time  and date. All was fine until this afternoon when it changed.  My apps have the right time and date. However the world clock is wrong. I have to turn off the automatic time setting to get the right time.

    My iphone is showing the wrong time and date. All was well until sometime this afternoon when it changed...  to Nov 5 (2 days prior to today), and about 9 hours and some minutes before the actual time.  The world clock for my time zone shows the same wrong date and time. My calender shows the same wrong date and time.  The phone can not find my time zone any more.   The only fix I found was to turn off the automatic setting for time.  What is  happening? Ideas?

    just sorted mine went to
    settings-mail,contacts,calender-timezone support
    then turned it off then on tapped time zone and typed london
    this did sort mine

  • When I try to purchase an app using my iphone it asks me for a password for the wrong email address. How do I reset my iphone to show the correct email address/apple ID

    when I try to purchase an app using my iphone it asks me for a password for the wrong email address. How do I reset my iphone to show the correct email address/apple ID

    Thanks for your reply. Having read through relevant topics it suggests that if I sync my iphone with the correct account on my pc it should use that one thereafter. i will try both.

  • How can I get the Organizer in Elements 12to display the file name and date of the thumbnail images?

    The View menu option to display the File Name is grayed out and thus I cannot display the file name.

    Hi,
    You need to go to View menu and check Details as well.
    You may even have to make the thumbnails larger by using the zoom slider at the bottom
    Good luck
    Brian

  • HT4363 I set the wrong apple ID. How do I reset?

    I have set a wrong apple ID for my new Apple tv. How can I reset?

    you change it in settings on the appletv

  • My android phone just started displaying the wrong time and it won't update widget.

    Any ideas? This is really annoying and could have to do to with the towers?

    Shut the phone down, pull the battery and sim card for 30 seconds, put it back together and turn it on and see it the correct time comes up after the phone reconnects to the network.  Do you still have this problem in other locations?

  • IPhone displays the wrong song information

    Hello,
    Recently I have noticed that my phone often displays the wrong songs and information.  What I mean is, when I tap on an artist, it shows the wrong songs.  For example, if I listened to AC/DC and then try to change it and listen to Alice in Chains, the phone still displays the AC/DC songs.  This is very aggravating and I seem to be the only person who has this problem.  I checked the song info on itunes and everything is correct.  Any ideas?
    Thank you,
    Brad

    This has been happening to me for while now and would love to get an answer or fix.

  • How to populate the data or details of only the present year and the previous year with respect to the given RATNG?

    Hi All,
    I have created a form with 5 blocks (namely ENQACMHDR, ENQACMDTL, ENQACEHDR, ENQACEDTL, ENQACSPEC), where i have 8 push buttons (namely ENTER_QUERY, EXEC_QUERY, CLEAR, FIRST, NEXT, PREVIOUS, LAST & EXIT).
    This form is created just for viewing purpose only. So after I execute, all the blocks have been blocked against insert & update.
    I query on 2 fields that is 'ENQNO' and 'RATNG' (Both the fields belong to the block ENQACMDTL).
    When I click on 'EXEC_QUERY' directly, all the data of all the years populates.
    But the user wanted the data to be populated from only the present year and the previous year.
    So , on 'WHERE Clause' of the property_palette of 'ENQACMDTL' block , I put in the following condition:
    SUBSTR(ENQACMDTL.ENQNO, 1,4)=TO_CHAR( ADD_MONTHS(SYSDATE,-12) , 'YYYY') OR SUBSTR(ENQACMDTL.ENQNO, 1,4)=TO_CHAR(SYSDATE, 'YYYY')
    PROPERTY PALETTE (ENQACMDTL block)
    WHERE Clause
    SUBSTR(ENQACMDTL.ENQNO, 1,4)=TO_CHAR( ADD_MONTHS(SYSDATE,-12) , 'YYYY') OR SUBSTR(ENQACMDTL.ENQNO, 1,4)=TO_CHAR(SYSDATE, 'YYYY')
    Now the data of only the present year and the previous year is being populated. Its ok with the field of 'ENQNO'.
    The problem is when i query on field 'RATNG' . 'RATNG' is a Text_item with Number of Items displayed=5. (5 rows)
    The following are 2 columns of a Table (Name=ENQACMDTL) in Database.
    ENQNO
    RATNG
    2013900054
    500KC2
    2013900047
    800KC4
    2013520018
    750KC6
    2012900037
    1000KC2
    2012520109
    500KC2
    2012140019
    750KC6
    2011540036
    500KC2
    2011100030
    1000KC2
    2006100007
    90KD8
    2006750014
    750KC6
    2006900072
    500KC2
    The first 4 numbers of 'ENQNO' denotes the year. There are more than a lakhs of records.
    So when i query on the field 'RATNG',
    Example:For RATNG=500KC2;
    I click on ENTER_QUERY, On the field of 'RATNG' , i put in the value 500KC2 and click on  EXEC_QUERY; Details with respect to 500KC2 is displayed as well as all the other unwanted RATNG like 750KC6, 1000KC2 (which belongs to the ENQNO of the present year and the previous year) also gets displayed.
    I want details of only RATNG (500KC2) to be displayed, but only of the present year and the previous year, that is 2013900054, 2012520109 (ENQNO).
    Other than 500KC2 RATNG, no other RATNG must be displayed.
    The RATNG=500KC2 is also present for ENQNO=2011540036 , 2006900072. But I dont want these to be displayed.
    I want only the data or details of the present year and the previous year to be displayed or populated with respect to the given RATNG.
    Can You Help me or tell me what do i do for this?
    Hope I'm clear with my question!!
    If my question is not clear, let me know plz.
    Thank You.
    Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
    Oracle forms 6i.

    On key-exeqry you have to program.  Delete all other trigger codings for checking your condition.
    It dint work on key-exeqry.
    I tried key-exeqry on form trigger, block (enqacmdtl) and also on field(:enqacmdtl.enqno) , but none of them worked.
    It did not display the message.
    I have a 'PUSH-BUTTON:EXEC_QUERY.
    For EXEC_QUERY, Trigger : WHEN_BUTTON_PRESSED;
    I added the following code:
    if to_number(substr(:enqacmdtl.enqno,1,4))<to_number(to_char(add_months(sysdate,-12),'YYYY')) then
         message('The Rating is not present for the present year and the previous year');message(' ',no_acknowledge);
         raise form_trigger_failure;
    else
         execute_query;
    end if;
    It is working fine and the message is being displayed.
    But again I have a new problem and that is;
    On the field :enqacmdtl.enqno, when i enter the '2013%' and press 'EXEC_QUERY', it works fine.
    but when i enter '2006%' and press 'EXEC_QUERY', it shows the following error
    FRM-50016: Legal characters are 0-9 - +E. It does not display the message also.
    but when i enter the complete number, '2006580002', then it works fine , that is it displays the message (The Rating is not present for the present year and the previous year).
    The problem is because of '%', only when i put in the restricted data (which does not satisfy where condition).
    How do i solve this?
    Thank You Priyasagi.

  • Calendar app icon is displaying the wrong date

    For some reason on my iPhone's homescreen the icon for the Calendar app has today started displaying the wrong date.
    It should show today's date, Monday 6th but instead it reads Sunday 5th.
    What confuses me is that the phone does know the date is Monday 6th as the lock screen shows it correctly and also when I actually load the Calendar app it starts on the right date. Also, when I load the multi task bar the Calendar app icon there is correct. See the attached photo, which shows the Calendar app on the home screen (faded, middle left) displaying yesterdays date Sunday 5th, while the app icon in the multi task bar is correct, Monday 6th.
    Syncing the calendar with my iMac does not correct the error. Equally, turning the phone off and on again has not sorted it.
    Does anyone have any idea what might be causing the fault? And more importantly how to correct it?
    Thanks.

    Thanks for the suggestion DaVBMan, sadly it didn't work. The only thing that did work was to wait until midnight and it corrected itself. In the mind of the phone it lived a whole day twice and then skipped one completely in order to get back on track. Very odd and also I have since discovered it has happened to a few of my friends too.
    It's not happened again so I have no idea what so ever what caused it. Fingers crossed it never recurs.

  • My Ipod is stuck on a white screen with the wrong time and a lock. computer doesn't recognized my Ipod..also gets hot when connected to charge..any ideas on how to fix this? Thank You

    Hi
    My Ipod nana...has frozen up and working. It shows a white screen with the wrong time and a lock symbol. When I connected it to my computer, it didn't show up. Back of Ipod gets really warm..Any ideas on how to fix it? Than You

    If it happens again and the reset (home + power buttons) doesn't work, just let the battery drain; you'll know when the screen shuts off. Charge it back up and it should be fine. Frankly, I'm surprised this worked for you. Usually I hear people with this problem say that holding both buttons doesn't work, and they have to do the battery drain.
    If the issue is incurable next time, you have a one-year warranty from the date of purchase.

  • The other day I had to reset my phone because i pulled it out from my laptop when it was updating. I then tried to restore it but i clicked the wrong option and it has restored all of my stuff from 2 years ago, is there any way to get back the stuff I had

    The other day I had to reset my phone because i pulled it out from my laptop when it was updating. I then tried to restore it but i clicked the wrong option and it has restored all of my stuff from 2 years ago, is there any way to get back the stuff I had

    maggielou wrote:
    I thought that I had backed up my pictures to icloud, but when I looked online at icloud, I don't see pictures listed.  However, a few of the recent pictures have shown up on my phone.
    IHow could I get these from my MacBook to my phone?
    Thanks again.
    When you log into you icloud account on your computer you are viewing data that you sync to icloud not the backups.  You can't view the backups.
    Look at the two links I provided.
    You still didn't answer any of my two questions I asked.

  • Program has to display the calender year with certain dates highlighted

    The program will have a selection screen with the parameter option for empid (Provide F4 help) and select option for Start Date and End Date (Provide the F4 functionality to the date fields.)
    2.        When the user  Executes the program, the program will do the following:
    a.       It has to display the calendar year for the start date and end date(same as Microsoft outlook calendar) . For Ex: you had taken casual leave on 12/04/05 then this date should be colored with yellow. And use different colors for different type of leaves.(it should cover casual, sick, optional, vacation and privilege leaves).
    we have maintained separate ztable to get the leave data.
    [email protected]
    [email protected]

    Hi Ashwneder,
    1. To implement the first part of your requirement , you can use the following code :
    REPORT  ZKUN_DATE1                              .
    tables : ztable.
    parameter : empid type ztable-empid.
    select-options  sdate for  sy-datum.
    Here i am assuming the table ztable contains the field empid.
    2. After you execute the button , you should retrieve the dates for the various leaves from the database table as below :
    select cas_leave Sick_leave opt_leave vac_leave pri_leave from ztable into table itab where empid = empid and sdate = sdate-low and edate = sdate-high.
    Note : Ztable is assumed to be the database table containig the other fileds also .
    Also ztable-sdate =Start date
    ztable-edate = End date.
    3. to display the data you can use the following code .
    Loop at itab.
    write the code tro display.
    Endloop.
    Here to display the various leaves as colored , you should use the option For coloring.
    The synax for coloring is :
    <b>FORMAT COLOR <n> [ON] INTENSIFIED [ON|OFF] INVERSE [ON|OFF].</b>
    Note : When n = 3, the color is yellow.
    Simlarly other values of n will give you different color.
    Hope this solves your provblem.
    Regards,
    Kunal.
    Note : Reward the helpful answer.

  • How to display the Previous years

    Hi
      CJE0 - 12KST1A costs:budget/actual/commt/rem.plan/assd
    How to display the previous years budget in above mentioned report. at present the report is showing only cumulative value of previous years,2009 and 2010.....
    My requirement is from 2005 to 2009 i want display the value in this report, please through some light on this.
    Thanks
    S.Murali

    Hi
    But i want check the previous years budget for some number of projects not one by one, because the number of project are more.
    The above mentioned solution is for one by one i can check the pervious years budget. But my requirement is collective.
    Thanks
    S.Murali

  • How to get the start time and date

    Hi everyone! I have a question ,who will be glad to help me! Thanks in advance!
    As we know ,when we finish the UUT test ,it generate report . The report format maybe like"SeqFileName_Report[Time][Date]_00001.xml"
    My question is"how can I get the [Time] and [Date] in the test sequence"

    See this post.
    How To Display Time Information in Report/Results?
    http://forums.ni.com/t5/NI-TestStand/During-a-test-how-can-I-find-the-start-time-and-date-of-that/td...
    Now is the right time to use %^<%Y-%m-%dT%H:%M:%S%3uZ>T
    If you don't hate time zones, you're not a real programmer.
    "You are what you don't automate"
    Inplaceness is synonymous with insidiousness

  • How to capture the presnt year and month  .Urgent!!

    Hi all,
    I need to take the present year and month from the system and have to populate in drodownlists. can any one help me how to get these two seperatly and populate. xxxxxx (please read forum rules)
    regards,
    Sharan
    Edited by: Armin Reichert on Jan 17, 2008 10:23 AM

    Hi,
        If you are using DropDownByKey UI elements:
    1. Let's say the context attributes bound to the selectedKey property are called year and month respectively.
    2. To populate year:
    Date current = new Date(System.currentTimeMillis());
    IWDAttributeInfo attinfo                  = wdContext.getNodeInfo().getAttribute(IContextElement.YEAR);
    ISimpleTypeModifiable modinfo       = attinfo.getModifiableSimpleType();
    IModifiableSimpleValueSet valset   = modinfo.getSVServices().getModifiableSimpleValueSet();
    valset.put("currYear",String.valueOf(current.getYear));
    3. You can do a similar thing for month.
    Regards,
    Satyajit.

Maybe you are looking for