Ical does not work in Day View

When I was working in ICal I have input an event in a date but I can only see it or change it when in Week View.
When I put in Day View it suddenly freezes and nothing appears. What can it be? it's curious that it freezes in October 15th. Anybody saw it before?
marcelo

Hello Troyantonik,
Since the issues with your camera seem to persist, we would recommend having the camera evaluated at the Canon Service Center. You can set up service through our web site, located here.

Similar Messages

Lion 10.7.1. Searching on iCal does not work

I have Lion 10.7.1. Searching on iCal does not work. Also, I tried searching form the spotlight search , it does not retrieve calendar entries. Note: my calendar files are on an encrypted disk image (but I enable the disk image , I can see the calendar).
Any advice ?
Dag

I have been searching for an answer to this problem for about 6 months. I took it to 2 genius'! Neither could find the problem and suggested I completely wipe my hard drive and reinstall all the software. There ahs to be another way!

After Installing Lion, Ical does not work. I cannot print, I cannot add an event, etc. How do I reinstall?

Since installing Lion OS, iCal does not work. I cannot add an event, print calendar, etc. How do i reinstall?

You can use Lion Recovery
Before you do that, go to ~/Library/Preferences
Move the com.apple.iCal.plist file from the Preferences folder to the Trash.
Restart your Mac.
See if you can print or add an event now.

Calendar item does not appear in day view for Sunday August 1, 2010

I have a strange problem. I have an appointment on Sunday August 1, 2010. When in day view, and move from Saturday July 31 to Sunday Augsust 1 the appointment does not appear. However, if you look at list view or month view, it is there. If you continue to Monday and then go back to Sunday (all in day view) it appears. There is another person in my office with the exact same problem, so I know it is not just my phone. Anyone else have this issue? Any fix? I am concerned about appointments I will miss because of this. I added appoinments directly into the phone, no server, no exchange, no sync, same problem. It appears to be a bug in OS4.

Refer following link for understanding & solution:
Accounting document not posted from billing document SD module
Hopefully this can assist you.
Thanks & Regards
JP

ICal does not work properly since the last OS update

Hi everybody,
I run a Macbook 15 Retina RAM 16Gb with Mac OS 10.8.4. Over the past months (I think after updating the OS), iCal has not been working properly. TO make a long story short, as you can see on the screen cap, it is no longer possible to select the kind of calendar/color etc when right clicking. In order for example to create a "Meetings" event (see left column on the screen cap), what i need to do now, is to find a previous event (i.e. created before iCal stopped to work) then copy and paste it to the time when I want it to happen in the future and then modify it. Not convenient at all.
This is kind of surreal (that such a bug has not been fixed yet) to given the price of the Mac and that iCal is part of the core apps of the OS. I looked over the Internet and did not find a solution. But I must have missed things. Hence I would be very very grateful if anyone could help me.
Thanks a lot.

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
http://tinyurl.com/32drz3d
 Cheers, Tom

ICal does not search all-day "detached events"

I've encountered a very specific, repeatable search problem:
(1) create an all-day repeating event (e.g., repeat daily for five days);
(2) add some text to the Notes field, and apply to All occurrences;
(3) search Event and To-do Items for some text in that Note, and all 5 instances of the all-day event are properly found;
(4) open a single instance of the all-day event, and replace the Note with different text;
(5) save the change for "Only this event" (this creates what used to be called a "detached event" in iCal 2.0);
(6) search for the new note text -- iCal doesn't find it.
This is NOT a Spotlight problem. I can search for the same text in Spotlight, and it returns the correct iCal events. Bento also has no trouble finding those events with the note text.
This problem is a real nuisance for me, because one of the ways I use iCal is to have a Calendar called "Notes" with a repeating all-day event called "Daily Notes", which I use as a poor-man's journal. Unfortunately, those notes cannot be searched within iCal.
Can anyone else confirm this behavior?

Jamaicangal,
Do you have any duplicate fonts? If so, try resolving duplicates.
;~)

Manually sorting Reminders in iCal does not work

On my Mac, within iCal, I can not sort Reminders manually. I've deleted iCal Prefs and started over, but still cannot sort manually. Any ideas? Thanks!

The newest Version 5.0.1 (1547.4) of iCal, for Mac OSX Lion (Version 10.7.2), has the Sort Manually option for Reminders. As stated in the preceding reply, however, this option is not available in the iCloud Calendar. Therein lies the problem, apparently.
Yesterday, I was on the phone with Apple Support for an nearly two hours, trying to get to the bottom of this issue. Not knowing the answer, the first person I talked to referred me to someone in the iApps department. The person in the iApps department could not resolve the problem either. So, I was referred to a senior technician in that department. After a lengthy diagnosis, this person confirmed that this is a system-wide problem in which the function is missing. The case was forwarded to the engineers, and I will be notified when they have a response.
Once, I get the response, I will update this discussion thread.

Acrobat xi makes my icons very large and the program very large. It is like everything is super big. Then it really does not work well to view files. What can I do?

My Acrobat XI enlarges my desktop, and the program is also very large. I cannot see the whole screen because it is so large. When I end Acrobat everything returns to normal. I just want to use Acrobat XI to read pdf files.

Hi Pat, that is the problem I am having. I have tried to change my scale for screen settings to 100%, but every time I change it, the next time I open the program, it reverts to system settings. It is not saving the new change I made. I have looked all over for a save command but there isn’t any. I even went to my regedit settings and did exactly what the instructions say. Still the same problem. Everything is at least 200%. Once I exit the Reader, everything reverts to normal. What am I doing wrong? Or what else can I do?
Thanks.
Paul Bardotz

Rebel T5 does not work in live view mode. Live view is enabled but images are not being captured.

troyantonik, What lens do you have and have you tried other lenses with your camera to see if they also do not autofocus when you press the shutter button down halfway? Just in case a setting may be causing this, I recommend that you reset the camera to the default settings. Please do the following:
Press the MENU button.Select the [Tools #3] tab.Select [Clear Settings].Select [Clear All Camera Settings].Select [OK].Select [Clear All Custom Func.].Select [OK].Exit the menu.If this is a time sensitive-matter, additional support options are available at Contact Us.

Hello Troyantonik,
Since the issues with your camera seem to persist, we would recommend having the camera evaluated at the Canon Service Center. You can set up service through our web site, located here.

Cascading Dynamic Parameters Do Not Work In Crystal Viewer 2008?

I have generated a report with Crystal Reports 2008 that uses a dynamic cascading parameter. I work in waste management and the report I create in Crystal is used as a "template" with the tonnages collected from all of our customers. Our less technically minded employees can then open this report with Crystal Reports Viewer 2008, use the drop down menus to select only the customer they need a report for and then export this to PDF for delivery.
The report as designed works perfectly in Crystal Reports, but the parameter does not work in Crystal Viewer.
Some of our customers have more than one physical location that we service. The cascading dynamic parameter in my report allows you to select the customer name, and then it only shows the locations linked to that customer, so the end user can select only the relevant location(s) for the report. The cascading parameter is dynamic and allows multiple selections, and is linked to a Saved Data formula. The report is saved with the data.
When the report is opened in Viewer, one of two things happens. If the report is saved in Crystal Reports and a specific customer/location is selected, then ONLY those selected customer/locations are available in the Viewer. If ALL the customers/locations are selected in Crystal Reports and saved, then in the Viewer they are all available, but selecting one customer does NOT narrow down the locations (i.e. it does not "cascade") and instead ALL of the locations are available even if they do not apply to the customer.
If I use a single dynamic parameter and select ALL of the customers (for example), then when this is opened in Crystal Viewer all of the customers are available from the parameters drop down and the report works fine. As soon as this is tried with a cascading parameter however, Crystal Viewer falls down.
Does anyone know of a workaround to this or if there is something I am doing wrong?

I am using the free Crystal Report 2008 Viewer along with designing reports with Crytal Reports ver 12.3. With a test file from SAP called "Interactive Parameters", the parameter feature works to refresh the report. The parameters that are supplied in the sample report work with Viewer. They show up under the parameter list in the parameter side panel in Viewer and are available to make record selections. When I add a parameter to the sample report in Crystal 2008 and then view the report in Viewer, my parameters are unavalable for record selection while the original parameters remain available. Futher, my parameters are displayed under a section called "Current Data Set" in the Parameter side panel, while the selectable parameters are displayed under the "Parameter" section in the parameter side panel. There must be a setting that is treating the parameters I create differently form the parameters created in the original sample report. Any help would be appreciated.

Help viewer does not work after update to 10.4.4

Since updating to 10.4.4 my Help viewer does not work, and all of the troubleshooting fixes suggested in other threads have not had any success in resolving this. I've noted that when I go to Users>Library>Documentation>Help there is no mac.help file - can someone tell me if that means that I've lost the file altogether and need to reinstall it? I get to the first screen of the viewer, but the links from there don't work. Thanks for any help that you can provide!

Thanks for your suggestion. I downloaded OnyX and ran the cleaning function. After restarting, I opened Help and once again the first screen appeared fine. But again most of the links did not work, though those under the "What's New" heading did work. I might add that I had previously tried a variety of suggestions posted in another thread, which included deleting from the caches folder in Home>Library several files such as com.apple.helpui and help.plist in the Preferences folder. (As noted in my previous post this evening, I also created another user but that also did not have any effect.) Any other ideas? Thanks

I get this error when I go to imovie, I have instalerat on via appstore, but it does not work. The QuickTime components necessary to view, edit, import and export various types of films are not installed. The components included in the iMovie installer. R

I get this error when I go to imovie, I have instalerat on via appstore, but it does not work.
The QuickTime components necessary to view, edit, import and export varioustypes of films are not installed. The components included in the iMovie installer.Reinstalling iMovie.

I get this error when I go to imovie, I have instalerat on via appstore, but it does not work.
The QuickTime components necessary to view, edit, import and export varioustypes of films are not installed. The components included in the iMovie installer.Reinstalling iMovie.

TS1381 My left arrow does not work on my macbook pro(model A1226). I have reset nvram, performed a safe boot, pulled the cache to desktop, replaced .globalpreference.plist, test all other keys with keyboard view (all others work) - HELP!!

My left arrow does not work on my macbook pro(model A1226).
I have reset nvram, performed a safe boot, pulled the cache to desktop, replaced .globalpreference.plist, & tested all other keys with "keyboard viewer" (all other keys work except for the arrow).
In addition, I have gone thru all the recommended checks with universal access and have booted from snow leopard dvd and the left arrow still does not work.
I have tried using the left arrow key in all of applications I use such as: excel, ms word, address book, calendar, iphoto, terminal, & highlighting an icon and using the arrows to move to another selected icon.
Here is the kicker! In addition, I purchased a logitech solar bluetooth keyboard and the arrows work fine with my ipad but do not work when paired with the macbook pro. All other keys work fine on the macbook pro using the bluetooth keyboard.
I believe this says that the problem is not in my macbook pro keyboard. So where can it be?
Can anyone think of any other rabbit holes I can search?
thanks and regards
vats3

I would also like to add that I've reverted the two cd drive and hard drive mods I did and the laptop is back to factory hardware and there is 0 corrosion or mold visible.

I want to disable or remove Game center from my iphone. It's always pop up during i play hay day game. So i can not solve this problem. Any way i try to log in game center my several Apple id account but it does' not work. I am still stuck in log in page

I want to disable or remove Game center from my iphone. It's always pop up during i play hay day game. So i can not solve this problem. Any way i try to log in game center my several Apple id account but it does' not work. I am still stuck in log in page

The Game Center app is pre installed and cannot be removed from the device.
Best thing to do is move it to the last available screen.
Hold down the Game Center app until all the apps jiggle then sliide the Game Center app to the right from one screen to the next. This requires a bit of finesse, but it's doable.
Press the Home button one time to stop the apps from jiggling.
For the Apple ID issue, try resetting.
Tap Settings > General > Reset > Reset All Settings
Then try your Apple ID and password for the Game Center app.

ICal: 'Open in Address Book' Function for 'Attendees' does not Work

iCal lets you drag a Contact from Address Book to the 'Attendees' field of an iCal Event. (You can also put the information into the field by typing the first few letters of the person's name, and Address Book will automatically populate the field with contacts containing those letters.) When you click on a contact in 'Attendees' and select 'Open in Address Book', it is supposed to open the contact's information in Address Book (in case you needed their phone number, forgot their wife's name, etc.). In the previous version of iCal, this ALMOST worked; it would find someone in Address Book, but it would be the first person in your Address Book list with that first name; not always the person you wanted.
The problem now is that when you click on a contact in 'Attendees' and select 'Open in Address Book', it simply opens the Address Book application and stops there; it does not go to the contact's data in Address Book. I sent Apple feedback on this problem 3 years ago, and again a few months ago, but it still does not work correctly. Does this work correctly for anyone?

Mine actually performs the sync, but after a few rounds of syncing, some contacts get deleted, some get their photos removed, some get duplicated, and some get removed from groups. The sync basically puts my address book through a blender. I'm syncing both with MobileMe and Google. Well, that is I tried to. I've decided not to sync with Google since that's what seems to initiate the mess.

Ical does not work in Day View

Similar Messages

Maybe you are looking for