Ical duplicate the date Saturday , October 18th and mess up all events

ICal shows Saturday, October 18th, duplicated at the calendar schedule for events. It brings trouble for every syncing messing up the events and crashes. When I open the calendar at mobileme page the date is duplicated there too. The calendars are only correct at my IPhone. I m a physician and its causing serious problems in syncing my appointments among my computers and devices. Could someone help me, please?

should clarify that I deleted duplicate events on the ipod so that should have left one in ical. there is still one listed in ical on the ipod but not on the computer, so deleting duplicate entry deleted it entirely from my ical on computer and mobile me. no icloud yet

Similar Messages

  • My performance is very slow when I run graphs. How do I increase the speed at which I can do other things while the data is being updated and displayed on the graphs?

    I am doing an an aquisition and displaying the data on graphs. When I run the program it is slow. I think because I have the number of scans to read associated with my scan rate. It takes the number of seconds I want to display on the chart times the scan rate and feeds that into the number of samples to read at a time from the AI read. The problem is that it stalls until the data points are aquired and displayed so I cannot click or change values on the front panel until the updates occur on the graph. What can I do to be able to help this?

    On Fri, 15 Aug 2003 11:55:03 -0500 (CDT), HAL wrote:
    >My performance is very slow when I run graphs. How do I increase the
    >speed at which I can do other things while the data is being updated
    >and displayed on the graphs?
    >
    >I am doing an an aquisition and displaying the data on graphs. When I
    >run the program it is slow. I think because I have the number of
    >scans to read associated with my scan rate. It takes the number of
    >seconds I want to display on the chart times the scan rate and feeds
    >that into the number of samples to read at a time from the AI read.
    >The problem is that it stalls until the data points are aquired and
    >displayed so I cannot click or change values on the front panel until
    >the updates occur on the graph. What can I do to be a
    ble to help
    >this?
    It may also be your graphics card. LabVIEW can max the CPU and you
    screen may not be refreshing very fast.
    --Ray
    "There are very few problems that cannot be solved by
    orders ending with 'or die.' " -Alistair J.R Young

  • How to read the data from Excel file and Store in XML file using java

    Hi All,
    I got a problem with Excel file.
    My problem is how to read the data from Excel file and Store in XML file using java excel api.
    For getting the data from Excel file what are all the steps i need to follow to get the correct result.
    Any body can send me the code (with java code ,Excel sheet) to this mail id : [email protected]
    Thanks & Regards,
    Sreenu,
    [email protected],
    india,

    If you want someone to do your work, please have the courtesy to provide payment.
    http://www.rentacoder.com

  • How can I download the data to Application Server and Network Drive

    Hi Experts
    I am having problem with download the data to Application Server and Network Drive in back ground. its working in foregorund but not in back ground.please suggest me . Thanks for advance.
    Thanks & Regards
    Raghava

    Hi Experts
    I am using like this
    P_Back is a check box on the selection-screen.
    it_fihrst_out-its internal table
    sy-batch -Program is running in the background
    IF sy-batch IS INITIAL.
        IF p_back = 'X'.
          OPEN DATASET file_01 FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
          IF sy-subrc = 0.
            LOOP AT it_fihrst_out.
              TRANSFER it_fihrst_out TO file_01.
            ENDLOOP.
          ENDIF.
          CLOSE DATASET file_01.
          CASE sy-subrc.
            WHEN 0.
              WRITE: / file_01, / 'successfully generated.'.
            WHEN OTHERS.
              WRITE: / file_01, 'Unexpected error occurred.'.
          ENDCASE.
        ELSE.
          CALL FUNCTION 'WS_DOWNLOAD'
            EXPORTING
              filename                = file_01
              filetype                = 'ASC'
            TABLES
              data_tab                = it_fihrst_out
            EXCEPTIONS
              file_open_error         = 1
              file_write_error        = 2
              invalid_filesize        = 3
              invalid_type            = 4
              no_batch                = 5
              unknown_error           = 6
              invalid_table_width     = 7
              gui_refuse_filetransfer = 8
              customer_error          = 9
              OTHERS                  = 10.
          CASE sy-subrc.
            WHEN 0.
              WRITE: / file_01, / 'successfully generated.'.
            WHEN 2.
              WRITE: / file_01, 'Output Error: File still open'.
            WHEN OTHERS.
              WRITE: / file_01, 'Unexpected error occurred.'.
          ENDCASE.
        ENDIF.
      ELSE.
        LOOP AT it_fihrst_out.
          WRITE:/ it_fihrst_out.
        ENDLOOP.
      ENDIF.
    This is the code .

  • Everytime I try to update my iPhone 4s I am told that the data downloaded was corrupted and I should try again later. What to do?

    I keep being told that the data has been corrupted and that I need to try again. It is rather annoying!

    How do you do that? please tell me as i am having the exact same problem.

  • What are the data elements of 0material and 0customer

    Hi,
    What are the data elements of 0material and 0customer??
    Thanks

    Hi.......
    Dataelement for 0MATERIAL is MATNR
    Dataelement for 0CUSTOMER is KUND1
    Check these links :
    http://help.sap.com/saphelp_nw04/helpdata/en/df/3ff438520e6a71e10000000a11405a/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/0a/802e1c120511d4973900a0c930e0da/frameset.htm
    Hope this helps you......
    Regards,
    Debjani......

  • I want to update my iTouch 4 to iOS 6, but I'm afraid I'll lose all the data on it. And when I went to iTunes, there was no button to back it up. HELP!!! :-o

    I really don't want to lose the data but I really want to update. all my friends have updated. I DON'T WANT TO LOSE ANYTHING PLEEEEEASE HELP!!!
    also, when I went to iTunes, there was no button for backup.
    I also want to update because then i can iMessage with my frien

    If you have everything already in iTunes and you have synced with iTunes at least twice (to assure you have backup) then you should not lose anything. Upon completion of the update you will have an option to restore the device from a backup.
    But, the update process will erase everything until you restore your backup.
    Vital Resources For Your iDevice (Updating, Apple ID, and iCloud)
    A. Upgrading iOS
       1. How to update your iPhone, iPad, or iPod Touch
       2. iPhone Support
       3. iPod Touch Support
       4. iPad Support
         a. Updating Your iOS to Version 6.0.x from iOS 5
              Tap Settings > General > Software Update
         If an update is available there will be an active Update button. If you are current,
         then you will see a gray screen with a message saying your are up to date.
         b. If you are still using iOS 4 — Updating your device to iOS 5 or later.
         c. Resolving update problems
            1. iOS - Unable to update or restore
            2. iOS- Resolving update and restore alert messages
    B. Apple ID Support
       1. Apple ID FAQ
       2. Find your Apple ID
       3. Recover your password
       3. Change your Apple ID
       4. Change your password
    C. iCloud Support
       1. What is iCloud?
       2. How to set up iCloud
       3. iCloud: System requirements
       4. Using your Apple ID for Apple services
       5. How to back up iCloud data
    D. List of iOS Devices and What They Support
       1. Identifying iPod models
       2. Identifying iPhone models
       3. Identifying iPhone models
    E. User Manuals
       1. iPads
       2. iPhones
       3. iPod Touches

  • Reconcile the data in sap bw and sap r/3

    Hi Experts,
    How to reconcile the data in SAP BW and SAP R/3?
    Thanks,
    Sathya

    Pl read this:
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/7a5ee147-0501-0010-0a9d-f7abcba36b14
    Ravi Thothadri

  • To save the data rs232 into binary and to post them on a graph

    Hello I finish this year a project of electronic to present in front of jury. I would like to show the assets of the Labview software by carrying out the interface of my project under this program. I have to work before with this software and an auxiliary chart to make regulation speed engine and regulation of heating. This time I would need to use the serial port .I have a serial port connected to a  CPLD+mémory SRAM. This assembly will send data by serial port . The PC must take delivery of the data in binary format and separate each one of the bit ====>first I recept the first word of 8 bits; the first bit is posted on a line the second bit on one second line etc.... (thus 8lignes) and when I recept the following word of 8 bit I carry out the same thing. In the final analysis I must find 8 lines posting a value 0 or 1 as on a logical analyzer. I hope that you will be able to help me. Thank you and sorry for my bad english.

    Hi
    If I translate your question into my (also foreign) english I would say that you receive bytes from the serial line in the form of characters
    and that each bit is representing the state of a digital line.
    So you need to read characters from the serial line 1 at a time, convert this into a byte and this one into 8 bits and display it.
    Try to find all these steps and the forum will help you to add them together.
    succes
    greetings from the Netherlands

  • I am using IOS 5 on iPad2. I am wondering why couldn't I edit the data in my contacts and calendar data?

    I am using IOS 5 on iPad2. I am wondering why couldn't I edit the data in my contacts and calendar data?

    Movies are not stored in your iCloud account unless you add them in the theater feature of iMovie version 10.

  • Taking the data from interactive forms and load the data into SAP system?

    hi all,
    I want to know how to take the data from interactive forms and load the data into sap system?
    if u have any sample scenario, explain with that.
    thanks in advance
    Raja

    Hello,
    Check the program...
    SAPBC480_DEMO.
    Check the below threads
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/88e7ea34-0501-0010-95b0-ed14cfbeb85a
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/bfbcd790-0201-0010-679d-e36a3c6b89fa
    Thanks
    Seshu

  • Thanks for nothing. I tryed to install the 8.1 Update. And it deleted all my fotos and data. thanks...

    Thanks for nothing. I tryed to install the 8.1 Update. And it deleted all my fotos and data. thanks...

    Nope....I know. i need to blame myself. it just asked me when i pluged the phone to my pc for the first time since looong...
    so. its okay. i had a back up with some pictures and some contacts and all that.
    the install process just got an issue so it stoped half way through and i could only completely start over.
    i was mad. now its okay

  • Pull the data from Azure sql and load into the on premises data base

    Hi friends,
    I have small requirement here, I have to pull the data from Azure sql and load it to the on premises data base.
    I am using Azure sync process to do that, but it will take so much time to do that..
    I know that azure have some limitations, is there any other way to do this..
    Please help me on this...

    Hello,
    Check the program...
    SAPBC480_DEMO.
    Check the below threads
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/88e7ea34-0501-0010-95b0-ed14cfbeb85a
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/bfbcd790-0201-0010-679d-e36a3c6b89fa
    Thanks
    Seshu

  • I have lost my iphone4 and i guess the theft have already clear up the data include my mails and so on. what can i do? i use the iphone only 2months and i dont have any icloud or mobileme acc. how apple can help me?

    i have lost my iphone4 and i guess the theft have already clear up the data include my mails and so on. what can i do? i use the iphone only 2months and i dont have any icloud or mobileme acc. how apple can help me?

    Apple can't/won't help you:
    Reporting a lost or stolen Apple product - http://support.apple.com/kb/ht2526 - "... Apple does not have a process to track or flag lost or stolen product..."
    Texas Mac Man links on lost/stolen i-devices - https://discussions.apple.com/message/18781718
    Contact the police about the theft.  Change passwords on any accounts used with the device.  Contact the carrier about discontinuing service and possibly blocking future contracts with the phone.  Shop for a new phone.

  • I want to buy a hard case for my macbook pro, but I don't know what year it is. When I use the serial number to try and find out, all it says is, "~VIN,MacBook Pro (15-inch Glossy)". When I type that into amazon for a case it gives me nothing!

    I want to buy a hard case for my macbook pro, but I don't know what year it is. When I use the serial number to try and find out, all it says is, "~VIN,MacBook Pro (15-inch Glossy)". When I type that into amazon for a case it gives me nothing!

    Hi T,
    Either of these will give you the info you seek:
    http://www.appleserialnumberinfo.com/Desktop/index.php
    http://www.chipmunk.nl/klantenservice/applemodel.html

Maybe you are looking for