ICal - Entourage failure after upload of 10.5.5

Hi all,
I have lost my ical link to my Entourage calender after uploading 10.5.5. I have tried the 'delete the cache ploy' that has helped other users (see threads on this forum) but iCal is still not linked to the exchange server - so I cannot see any new appointments added to the exchange server. While liberating at the moment - it is going to cause problems soon!
Any ideas what is happening?
Thanks
Jon

Similar Messages

ICal / Entourage invitation compatibility.

It seems there are several issues regarding calendar invitation compatibilly with iCal, Entourage, and Outlook. I've read the forum here, however, and have not seen this particular issue addressed, so if someone can shed some light it would be greatly appreciated!
In our office, some users are using iCal 2.0.3, others Entourage 11.2.1. When we invite each other to calendar appointments, there are various anomolies that occur. I'll list a few:
iCal to Entourage:
1) Some appointments with a 1 hour or less duration do not appear in the Entourage calendar after being accepted.
2) Time Zone support doesn't work. iCal appointments are bumped back an hour for no apparent reason. However, if the time zone on the appointment is set to "floating" in iCal before being sent, it seems to work fine in Entourage when recieved.
Entourage to iCal:
1) All-Day events come through as 12AM-12PM, not an actuall "All-Day" event. Also, multi-day events appear to have the correct dates, but since they are not recognized as "All-Day" events, they do not span the days and only appear on the first day of the event.
These are the few off the top of my head that we've noticed. Are there any solutions for these issues?
Thanks,
J

Me too. Same problems. Anyone?

How to keep ical alarms displayed after restarting

I notice that my iCal alarms disappear after quitting iCal or restarting my computer. For example "Call Doctor" shows up today at 8 am when I start work. I shut down for a meeting. I restart and the alarm message is gone. The event is still there. But I might forget to call unless I see the alarm again. I remember Microsoft Entourage did this and I found it very helpful. Is there a way to get this same effect with iCal?

Hi, This is not related to your question about ical alarms, but to a previous post you made when your iweb crashed when saving. I also had to use time machine to transfer all info to a new computer and I am having the same problem when I try to save. I did not completely understand your solution because I am not very savvy with computers. I did go in and change all the permissions to read and write, but I still have the problem. I don't know how to "add my account name to the File Info"-
I just spoke with a supervisor from Apple for two hours and who did not solve the problem. (He thought he did, but he did not and he has not called me back).
If you could give me an explanation of your solution, it would be very helpful and immensely appreciated.
Thank you for any assistance you can give me regarding this. I really need my iweb!
[email protected]
Here is the solution you posted:
I figured it out. It was those permissions. I simply added my account name to the File Info. For some reason the Time Machine restoration did not copy the permission for the package (however the contents had the correct permissions.

How to delete file from column after upload with messageFileUpload?

Which is the way to delete a file from column i have uploaded with messageFileUpload. After uploading the system generates a link to download the file. But how i can delete the file?

Thank you! Syncing has always scared me...basically I am just afraid to lose any photos. But it worked. Again thank you

Swf files appearing in preview (D8) but not n browser after uploading - frustrated!

Hello,
I have worked with Flash and Dreamweaver on the side for a
number of years. We all know that after the recent changes, the way
it handles object and embed tags has changed to favor Java
actionscripts instead.
This code I am about to paste was created using Dreamweaver
8.02, with transitional (x) html. Now mind you, this is not the
prettiest piece of code you've ever seen. I now am learning to use
CSS layouts instead of layers/tables, with php and flash
integrated. This one example is not the only time I have had this
problem however.
I made a silly flash banner (its actually a placeholder for a
better one I have to develop) for testing purposes and sizing. It
appears fine in Firefox, and IE6 in the preview mode via
Dreamweaver. When I upload it all to the site, the flash banner
does not appear.
I have tried copying the FLA and SWF files to the root folder
(the fla, swf, and html files generated are all present), and tried
a number of variations in the code and parameters to no avail. The
darn thing just won't appear now. Similarly older pages I have
created that Dreamweaver now prompts you to "fix the object tag
that may not work in IE7...etc" have the same issue. If I select
"go ahead and fix them for me", they are visible in production, but
gone after uploading.
Now to remove the possibility that this was a layering or
parent tag issue of visibility, I created a blank HTML page and
"insert/media/flash" and stuck the banner in there, then uploaded
it to my server. It doesn't appear.
I need help. I have been scouring the web for a few days now
to no avail and have become quite frustrated with what used to be a
really easy integration of Flash and html.
Here is the top chunk of code from the page in question: (the
page is live with the missing banner here:
http://www.aeonsolutions.net/shirtworks/Shrtwrks_Homepage.html)
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
Transitional//EN" "
http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="
http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html;
charset=iso-8859-1" />
<title>Shirtworks custom T shirts, silk screening,
inkjet printing, embroidery, event, club, sport, organization,
holiday, humor, clothing</title>
<script src="Scripts/AC_RunActiveContent.js"
type="text/javascript"></script>
<style type="text/css">

</style>
<script type="text/javascript">

</script>
<link href="CSS/shirtworks.css" rel="stylesheet"
type="text/css" media="all" />
<style type="text/css">

</style>
</head>
<body
onload="MM_preloadImages('MenuText/HomePage_over.jpg','MenuText/Artwork_over.jpg','MenuTe xt/Apparel_over.jpg','MenuText/Embroidery_over.jpg','MenuText/Custom_over.jpg','MenuText/D irections_over.jpg','MenuText/AboutUs_over.jpg','MenuText/Contact_over.jpg')">
<div id="Layer5">
<table width="533" height="141" border="0">
<tr>
<td><script type="text/javascript">
AC_FL_RunContent( 'codebase','
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=7,0,19,0','dat a','Banner1.html','width','525','height','143','hspace','0','vspace','0','align','middle', 'border','0','title','Banner1','src','Banner1','pluginspage','http://www.macromedia.com/go /getflashplayer','scale','noborder','movie','Banner1'
); //end AC code
</script><noscript><object
classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase="
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=7,0,19,0"
data="Banner1.html" width="525" height="143" hspace="0" vspace="0"
align="middle" border="0" title="Banner1">
<param name="movie" value="Banner1.swf" />
<param name="SCALE" value="noborder" />
<embed src="Banner1.swf" width="525" height="143"
hspace="0" vspace="0" align="middle" pluginspage="
http://www.macromedia.com/go/getflashplayer"
type="application/x-shockwave-flash"
scale="noborder"></embed>
</object></noscript></td>
</tr>
</table>
Understanding this change is fundamental in my developing
process as a designer, and will save my sanity. I appreciate any
help.
Mike

Did you upload this folder?
<script src="Scripts/AC_RunActiveContent.js"
type="text/javascript"></script>
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"MalikyeMoon" <[email protected]> wrote in
message
news:[email protected]...
> Hello,
>
> I have worked with Flash and Dreamweaver on the side for
a number of
> years.
> We all know that after the recent changes, the way it
handles object and
> embed
> tags has changed to favor Java actionscripts instead.
>
> This code I am about to paste was created using
Dreamweaver 8.02, with
> transitional (x) html. Now mind you, this is not the
prettiest piece of
> code
> you've ever seen. I now am learning to use CSS layouts
instead of
> layers/tables, with php and flash integrated. This one
example is not the
> only
> time I have had this problem however.
>
> I made a silly flash banner (its actually a placeholder
for a better one I
> have to develop) for testing purposes and sizing. It
appears fine in
> Firefox,
> and IE6 in the preview mode via Dreamweaver. When I
upload it all to the
> site,
> the flash banner does not appear.
>
> I have tried copying the FLA and SWF files to the root
folder (the fla,
> swf,
> and html files generated are all present), and tried a
number of
> variations in
> the code and parameters to no avail. The darn thing just
won't appear
> now.
> Similarly older pages I have created that Dreamweaver
now prompts you to
> "fix
> the object tag that may not work in IE7...etc" have the
same issue. If I
> select "go ahead and fix them for me", they are visible
in production, but
> gone
> after uploading.
>
> Now to remove the possibility that this was a layering
or parent tag issue
> of
> visibility, I created a blank HTML page and
"insert/media/flash" and stuck
> the
> banner in there, then uploaded it to my server. It
doesn't appear.
>
> I need help. I have been scouring the web for a few days
now to no avail
> and
> have become quite frustrated with what used to be a
really easy
> integration of
> Flash and html.
>
> Here is the top chunk of code from the page in question:
(the page is
> live
> with the missing banner here:
>
http://www.aeonsolutions.net/shirtworks/Shrtwrks_Homepage.html)
>
> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
Transitional//EN"
> "
http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
> <html xmlns="
http://www.w3.org/1999/xhtml">
> <head>
> <meta http-equiv="Content-Type" content="text/html;
charset=iso-8859-1" />
> <title>Shirtworks custom T shirts, silk screening,
inkjet printing,
> embroidery, event, club, sport, organization, holiday,
humor,
> clothing</title>
> <script src="Scripts/AC_RunActiveContent.js"
> type="text/javascript"></script>
> <style type="text/css">
> 
> </style>
> <script type="text/javascript">
> 
> </script>
> <link href="CSS/shirtworks.css" rel="stylesheet"
type="text/css"
> media="all" />
> <style type="text/css">
> 
> </style>
>
> </head>
>
> <body
>
onload="MM_preloadImages('MenuText/HomePage_over.jpg','MenuText/Artwork_over.jpg
>
','MenuText/Apparel_over.jpg','MenuText/Embroidery_over.jpg','MenuText/Custom_ov
>
er.jpg','MenuText/Directions_over.jpg','MenuText/AboutUs_over.jpg','MenuText/Con
> tact_over.jpg')">
> <div id="Layer5">
> <table width="533" height="141" border="0">
> <tr>
> <td><script type="text/javascript">
> AC_FL_RunContent(
> 'codebase','
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#
>
version=7,0,19,0','data','Banner1.html','width','525','height','143','hspace','0
>
','vspace','0','align','middle','border','0','title','Banner1','src','Banner1','
> pluginspage','
http://www.macromedia.com/go/getflashplayer','scale','noborder','m
> ovie','Banner1' ); //end AC code
> </script><noscript><object
> classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000"
> codebase="
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#ve
> rsion=7,0,19,0" data="Banner1.html" width="525"
height="143" hspace="0"
> vspace="0" align="middle" border="0" title="Banner1">
> <param name="movie" value="Banner1.swf" />
> <param name="SCALE" value="noborder" />
> <embed src="Banner1.swf" width="525" height="143"
hspace="0"
> vspace="0" align="middle"
> pluginspage="
http://www.macromedia.com/go/getflashplayer"
> type="application/x-shockwave-flash"
scale="noborder"></embed>
> </object></noscript></td>
> </tr>
> </table>
>
> Understanding this change is fundamental in my
developing process as a
> designer, and will save my sanity. I appreciate any
help.
>
> Mike
>

After uploading our phones with the latest update, we have noticed that the battery life has deminished considerably. I now have to charge my phone overnight and two or three times a day. Prior to the update, my battery life lasted me at least a full day

After uploading our phones with the latest update, we have noticed that the battery life has deminished considerably. I now have to charge my phone overnight and two or three times a day. Prior to the update, my battery life lasted me at least a full day. We have several phones in our office and the ones that have updated (4) now have issue holding a charge/battery life. I really liked this phone and can not believe that you are now going to charge us $79 a battery to fix what is most definately a problem with your latest update. I know other people outside of our company that are having the same problem. Not to mention when I called AT&T it was confirmed to me that they are hearing the same issue and then some from other customers as well. Your own people, once I talked to them earlier today, told me they are showing a history of issues that are showing up after the update was put in place. Of course she tried to say, "Maybe the age of the battery and the update both contributed". Whatever.
I want you all to know how disappointed I am in your company for the handling of this issue. I always thought "Apple" was the line I didn't have to worry about having any types of issue. And that you all would stand behined your product 100%. Now I am not so sure.
I would love to hear back from your company on how you perceive the issue with all of these phones that prior to the update didn't have any issues and how after the update THEY ARE NOW having issues. I do not believe this was an issue due to the age of a battery and that was pretty lame to say so. It was fine and now its not.
Please feel free to contact me and help me figure out a way to pay for all of the batteries that will be needed for our company to contiue doing business as needed.
Thank you.
Web Address (URL):
5106 McNarney

Sorry this is a user to user technical forum. There is NO APPLE here as stated in the term of use when you signed up for this forum.
here are some battery tips
http://osxdaily.com/2013/09/19/ios-7-battery-life-fix/
http://www.apple.com/batteries/iphone.html

External Hard Drive Failures after iMac internal drive replaced

I was one of those lucky ppl who had to have my internal 1TB Seagate HDD replaced due to the recall. It was replaced on Friday.
After the drive was replaced (with another Seagate, ***?), I cloned my previous system back to the new drive (restoring from Time Machine required me to re-download Lion, which required me to re-download to a newer version of Snow Leopard, and just, Oi, vey, I used my clone).
I then had to create another bootcamp partition, and after that, I restored my previous bootcamp from an image backup with Winclone.
The next morning, my Time Machine external backup drive (a Maxtor OneTouch) makes horrible fluttering and crunching noises and cannot be found via disk utility, certainly doesn't mount to the desktop. I figure it just coincidentally failed and attached a new drive (a different OneTouch) for backup.
While Time Machine is performing an initial backup to this new drive (will take 10 hrs), I try to move a few media files to another external media drive (LaCie 1TB). I receive a couple of error -36s on a few particular files, so I figure I should wait for the Time Machine to backup and then diagnose the media drive.
The next morning (after 10 hr backup is finished), I have a stop-sign error that a disk was unmounted improperly (the LaCie media drive). The drive cannot be seen in disk utility or on a completely different MBP running Snow Leopard. It's spinning up, but it can't be read.
Only thing I can think to do is reinstall 10.8.2 over top the cloned system, make sure that the recovery partition was recreated and working.
This can't be a coinicidence, right? At this point, I'm afraid to keep my external storage drives and clone attached to the iMac, but I'm afraid to not have TM drive attached. Anyone know where to start diagnosing the problem?
1. Could a new internal drive be the problem, hardware wise?
2. Could the lack of an initial recovery partition or the setting up of a bootcamp partition have these sorts of consequences?
3. Could the problem be from restoring a clone?

Well, it is a LaCie-packaged adapter, some version of that model. The hub is on the mac mini inspired line of LaCie HDs (http://www.lacie.com/company/news/news.htm?id=10269). I've had it for 6 yrs, and the hub is still going. Other drives have been running from the hub without issue for all that time (and still are). There is no hissing, and the display light indicates the hub is getting power.
You think it's time for a new hub?
The internal switchout is just a coincidence?
(Basically, I'm not a hardware expert. Does anyone know if an internal drive or internal sensor/connection problem can cause externals to fail or blowout a controller? I'm waiting on a drive dock to arrive—I'll know more whether these are HD failures or chip failures after that. Both drives showed normal-seeming power use via their display lights.)

HT4910 My iCal has frozen after I tried to paste info from an email into a reminder. I get a "server reports an error" message with what I tried to paste in the box. Calendar is frozen and will only close by forcing it. Any help?

My iCal has frozen after I tried to paste info from an email into a reminder. I get a "server reports an error" message with what I tried to paste in the box. Calendar is frozen and will only close by forcing it. Any help?

Did another window open with the pasted information? If so, try hitting "enter/return" key and "delete" key at the same time. That should get rid of the current action on the ical, the extra window should go bye-bye, and all should be fine with the world.

How to validate the contents of excel file after uploading it.

hi Experts,
                 we have a requirement in which we need to create business transactions with the data in the excel file after it was uploaded. we are creating this transactions(BP,LEAD..) in webui -marketing professional role-external lists. what i have to do is, after uploading the data from excel file, i need to check for the mandatory fields in the data ,if anything is missing then i need to display the error message to the user. i am new to this webclinet frame work. please help me in achieving this functioanlity.any code snippet would be very helpful.
THANKS IN ADVANCE.

Hi ,
Try with the below code.
in the upload class ihn attributes declare
go_messages
level static
visibility public
Associated Type CL_CRM_GENIL_GLOBAL_MESS_CONT.
in the event for upload
lo_core     = cl_crm_bol_core=>get_instance( ).
go_messages = lo_core->get_global_message_cont( ).
go_messages->reset( ).
REFRESH : t_return.
create a function module to validate the mandatory fields.
loop at i_table
call a function module
endloop.
In function module validate the mandatory fields if empty fill a error message and append to internal table.
loop at t_return INTO st_return WITH KEY type = 'E'.
CALL METHOD go_messages->add_message
        EXPORTING
          iv_msg_type          = st_return-type
          iv_msg_id              = st_return-id
          iv_msg_number     = st_return-number
          iv_msg_v1             = st_return-message_v1
          iv_msg_v2             = st_return-message_v2
          iv_msg_v3             = st_return-message_v3
          iv_msg_v4            = st_return-message_v4
          iv_show_only_once = abap_true.
endloop.
Regards,
Gangadhar.S

Data in CSV uploads successfully, but it is not visible after upload.

Hi,
I am using Apex 3.2 on Oracle 11g.
This is an imported application for which I am making changes as per my requirements. As I am new to Apex and even SQL, I request forum members to help me with this.
Please find below the old code for uploading data from CSV. It displays only 6 columns - Database Name, Server Name, Application Name, Application Provider, Critical, Remarks. This was successfully uploading all the data from CSV and that data was visible after upload.
OLD CODE:_
--PLSQL code for uploading application details
DECLARE
v_blob_data      BLOB;
v_blob_len      NUMBER;
v_position      NUMBER;
v_raw_chunk      RAW(10000);
v_char           CHAR(1);
c_chunk_len           NUMBER:= 1;
v_line           VARCHAR2 (32767):= NULL;
v_data_array      wwv_flow_global.vc_arr2;
v_rows           NUMBER;
v_count           NUMBER;
v_dbid           NUMBER;
v_serverid           NUMBER;
v_sr_no          NUMBER:=1;
v_last_char          varchar2(2);
BEGIN
-- Read data from wwv_flow_files
SELECT blob_content INTO v_blob_data FROM wwv_flow_files
WHERE last_updated = (SELECT MAX(last_updated) FROM wwv_flow_files WHERE UPDATED_BY = :APP_USER)
AND id = (SELECT MAX(id) FROM wwv_flow_files WHERE updated_by = :APP_USER);
v_blob_len := dbms_lob.getlength(v_blob_data);
v_position := 1;
-- For removing the first line
WHILE ( v_position <= v_blob_len )
LOOP
v_raw_chunk := dbms_lob.substr(v_blob_data,c_chunk_len,v_position);
v_char := chr(hex_to_decimal(rawtohex(v_raw_chunk)));
v_position := v_position + c_chunk_len;
-- When a whole line is retrieved
IF v_char = CHR(10) THEN
EXIT;
END IF;
END LOOP;
-- Read and convert binary to char
WHILE ( v_position <= v_blob_len )
LOOP
v_raw_chunk := dbms_lob.substr(v_blob_data,c_chunk_len,v_position);
v_char := chr(hex_to_decimal(rawtohex(v_raw_chunk)));
v_line := v_line || v_char;
v_position := v_position + c_chunk_len;
-- When a whole line is retrieved
IF v_char = CHR(10) THEN
--removing the new line character added in the end
v_line := substr(v_line, 1, length(v_line)-2);
--removing the double quotes
v_line := REPLACE (v_line, '"', '');
--checking the absense of data in the end
v_last_char:= substr(v_line,length(v_line),1);
IF v_last_char = CHR(44) THEN
     v_line :=v_line||'-';
END IF;
-- Convert each column separated by , into array of data
v_data_array := wwv_flow_utilities.string_to_table (v_line, ',');
-- Insert data into target tables
SELECT SERVERID into v_serverid FROM REPOS_SERVERS WHERE SERVERNAME=v_data_array(2);
SELECT DBID into v_dbid FROM REPOS_DATABASES WHERE DBNAME=v_data_array(1) AND SERVERID=v_serverid;
--Checking whether the data already exist
SELECT COUNT(APPID) INTO v_count FROM REPOS_APPLICATIONS WHERE DBID=v_dbid AND APPNAME=v_data_array(1);
IF v_count = 0 THEN
EXECUTE IMMEDIATE 'INSERT INTO
REPOS_APPLICATIONS (APPID,APPNAME,APP_PROVIDER,DBID,SERVERID,CRITICAL,LAST_UPDATE_BY,LAST_UPDATE_DATE,REMARKS) VALUES(:1,:2,:3,:4,:5,:6,:7,:8,:9)'
USING
APP_ID_SEQ.NEXTVAL,
v_data_array(3),
v_data_array(4),
v_dbid,
v_serverid,
v_data_array(5),
v_data_array(6),
v_data_array(7),
v_data_array(8);
END IF;
-- Clearing out the previous line
v_line := NULL;
END IF;
END LOOP;
END;
==============================================================================================================================
Please find below the new code (which I modified as per my requirements) for uploading data from CSV. It displays 17 columns - Hostname, IP Address, Env Type, Env Num, Env Name, Application, Application Component, Notes, Cluster , Load Balanced, Business User Access Mechanism for Application, Env Owner, Controlled Environment, SSO Enabled, ADSI / LDAP / External Directory Authentication, Disaster Recovery Solution in Place, Interfaces with other application.
This is successfully uploading all the data from CSV, But this uploaded data is not visible in its respective tab.
_*NEW CODE:*_
--PLSQL code for uploading application details
DECLARE
v_blob_data      BLOB;
v_blob_len      NUMBER;
v_position      NUMBER;
v_raw_chunk      RAW(10000);
v_char           CHAR(1);
c_chunk_len           NUMBER:= 1;
v_line           VARCHAR2 (32767):= NULL;
v_data_array      wwv_flow_global.vc_arr2;
v_rows           NUMBER;
v_count           NUMBER;
v_dbid           NUMBER;
v_serverid           NUMBER;
v_sr_no          NUMBER:=1;
v_last_char          varchar2(2);
BEGIN
-- Read data from wwv_flow_files
SELECT blob_content INTO v_blob_data FROM wwv_flow_files
WHERE last_updated = (SELECT MAX(last_updated) FROM wwv_flow_files WHERE UPDATED_BY = :APP_USER)
AND id = (SELECT MAX(id) FROM wwv_flow_files WHERE updated_by = :APP_USER);
v_blob_len := dbms_lob.getlength(v_blob_data);
v_position := 1;
-- For removing the first line
WHILE ( v_position <= v_blob_len )
LOOP
v_raw_chunk := dbms_lob.substr(v_blob_data,c_chunk_len,v_position);
v_char := chr(hex_to_decimal(rawtohex(v_raw_chunk)));
v_position := v_position + c_chunk_len;
-- When a whole line is retrieved
IF v_char = CHR(10) THEN
EXIT;
END IF;
END LOOP;
-- Read and convert binary to char
WHILE ( v_position <= v_blob_len )
LOOP
v_raw_chunk := dbms_lob.substr(v_blob_data,c_chunk_len,v_position);
v_char := chr(hex_to_decimal(rawtohex(v_raw_chunk)));
v_line := v_line || v_char;
v_position := v_position + c_chunk_len;
-- When a whole line is retrieved
IF v_char = CHR(10) THEN
--removing the new line character added in the end
v_line := substr(v_line, 1, length(v_line)-2);
--removing the double quotes
v_line := REPLACE (v_line, '"', '');
--checking the absense of data in the end
v_last_char:= substr(v_line,length(v_line),1);
IF v_last_char = CHR(44) THEN
     v_line :=v_line||'-';
END IF;
-- Convert each column separated by , into array of data
v_data_array := wwv_flow_utilities.string_to_table (v_line, ',');
-- Insert data into target tables
--SELECT SERVERID into v_serverid FROM REPOS_SERVERS WHERE SERVERNAME=v_data_array(2);
--SELECT DBID into v_dbid FROM REPOS_DATABASES WHERE DBNAME=v_data_array(1) AND SERVERID=v_serverid;
--Checking whether the data already exist
--SELECT COUNT(APPID) INTO v_count FROM REPOS_APPLICATIONS WHERE DBID=v_dbid AND APPNAME=v_data_array(1);
IF v_count = 0 THEN
EXECUTE IMMEDIATE 'INSERT INTO
REPOS_APPLICATIONS (APPID,HOSTNAME,IPADDRESS,ENV_TYPE,ENV_NUM,ENV_NAME,APPLICATION,APPLICATION_COMPONENT,NOTES,CLSTR,LOAD_BALANCED,BUSINESS,ENV_OWNER,CONTROLLED,SSO_ENABLED,ADSI,DISASTER,INTERFACES) VALUES(:1,:2,:3,:4,:5,:6,:7,:8,:9,:10,:11,:12,:13,:14,:15,:16,:17,:18)'
USING
APP_ID_SEQ.NEXTVAL,
v_data_array(1),
v_data_array(2),
v_data_array(3),
v_data_array(4),
v_data_array(5),
v_data_array(6),
v_data_array(7),
v_data_array(8),
v_data_array(9),
v_data_array(10),
v_data_array(11),
v_data_array(12),
v_data_array(13),
v_data_array(14),
v_data_array(15),
v_data_array(16),
v_data_array(17);
END IF;
-- Clearing out the previous line
v_line := NULL;
END IF;
END LOOP;
END;
============================================================================================================================
FYI, CREATE TABLE_ is as below:
CREATE TABLE "REPOS_APPLICATIONS"
(     "APPID" NUMBER,
     "APPNAME" VARCHAR2(50),
     "APP_PROVIDER" VARCHAR2(50),
     "DBID" NUMBER,
     "CRITICAL" VARCHAR2(3),
     "REMARKS" VARCHAR2(255),
     "LAST_UPDATE_DATE" TIMESTAMP (6) DEFAULT SYSDATE NOT NULL ENABLE,
     "LAST_UPDATE_BY" VARCHAR2(10),
     "SERVERID" NUMBER,
     "HOSTNAME" VARCHAR2(20),
     "IPADDRESS" VARCHAR2(16),
     "ENV_TYPE" VARCHAR2(20),
     "ENV_NUM" VARCHAR2(20),
     "ENV_NAME" VARCHAR2(50),
     "APPLICATION" VARCHAR2(50),
     "APPLICATION_COMPONENT" VARCHAR2(50),
     "NOTES" VARCHAR2(255),
     "CLSTR" VARCHAR2(20),
     "LOAD_BALANCED" VARCHAR2(20),
     "BUSINESS" VARCHAR2(255),
     "ENV_OWNER" VARCHAR2(20),
     "CONTROLLED" VARCHAR2(20),
     "SSO_ENABLED" VARCHAR2(20),
     "ADSI" VARCHAR2(20),
     "DISASTER" VARCHAR2(50),
     "INTERFACES" VARCHAR2(50),
     CONSTRAINT "REPOS_APPLICATIONS_PK" PRIMARY KEY ("APPID") ENABLE
ALTER TABLE "REPOS_APPLICATIONS" ADD CONSTRAINT "REPOS_APPLICATIONS_R01" FOREIGN KEY ("DBID")
     REFERENCES "REPOS_DATABASES" ("DBID") ENABLE
ALTER TABLE "REPOS_APPLICATIONS" ADD CONSTRAINT "REPOS_APPLICATIONS_R02" FOREIGN KEY ("SERVERID")
     REFERENCES "REPOS_SERVERS" ("SERVERID") ENABLE
==============================================================================================================================
It would be of great help if someone can help me to resolve this issue with uploading data from CSV.
Thanks & Regards
Sharath

Hi,
You can see the installed dictionaries and change between them by right-clicking and choosing '''Languages''' inside a live text box eg. the box you are in when replying or right-clicking on the '''Search''' box on the top right corner of this page and choosing '''Check Spelling'''.

Hallo, after upload my iPad air and my iPhone 5 to iOS 8 (and later Mac to Yosemite, version 10.10), I don't find in my iPad air and in my iPhone 5 photos I can see in iPhoto (version 9.6) on my Mac's Cloud.

hallo, after upload iPad air and iPhone 5 to iOS 8 (and few days ago Mac to Yosemite, version 10.10), I don't find in my iPad air and in my iPhone 5 photos I can see in iPhoto (version 9.6) on my Mac's Cloud. I tried to add manually from library to iCloud's streaming photo with no result. in iPhoto's events I've 940 photos, in iPhone and iPad about 450. I have in mobile devices only photos taken with iPhone. thank

There is no warning there, only a recommendation...
We recommend that you update to the latest version of iPhoto before placing your order,
On 10.6.8 you can update to 9.2.3.
You really need to rethink you're computing habits. Using a computer without a back up is like driving without a safety belt. Updating the OS and applications without one is like driving blindfolded and drunk without a safety belt...
Most Simple Back Up:
Drag the iPhoto Library from your Pictures Folder to another Disk. This will make a copy on that disk.
Slightly more complex: Use an app that will do incremental back ups. This is a very good way to work. The first time you run the back up the app will make a complete copy of the Library. Thereafter it will update the back up with the changes you have made. That makes subsequent back ups much faster. Many of these apps also have scheduling capabilities: So set it up and it will do the back up automatically.
Example of such apps: Chronosync - but there are many others. Search on MacUpdate or the App Store

SQL connection errors when stress testing mobile service: SQL failure after 3 attempts

I have created a Mobile Service (node.js), which has been running for a few months with 50-100k api calls per day with no issues.
The usage of the service will be scaled up soon, and it will receive much higher traffic, so I am running stress tests (on a staging deployment of the same service).
The api in question queries data from the sql database that is attached to the mobile service, but caches the resulting data in a redis database for 5 minutes, so each call with identical parameters will not access the SQL database, just the redis cache.
My first test never has any problems:
Run a single api calls as fast as possible using the program wrk (https://github.com/wg/wrk). This test never has a problem, and I have run it an hour continuously with a sustained rate of 200 req/s and very few timeout errors.
The second test always causes problems:
I created a list of 5 different api calls to the same service (same endpoint, but different parameters), and I run those randomly interweaved as fast as possible. I use the program locust (http://locust.io) for this, spawing 10.000 clients at a rate of 500
per second. For the first few seconds everything goes ok, but then connections start failing massively.
I get mostly:
Error: SQL failure after 3 attempts. Error: [Microsoft][SQL Server Native Client 10.0]TCP Provider: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected
host has failed to respond.
(SqlState: 08001, Code: 10060)
And I see this in the http response:
ConnectionError(ProtocolError('Connection aborted.', gaierror(8, 'nodename nor servname provided, or not known')),)
The strange thing is that since I am running the same five calls repeatedly, only the very first of each call will actually access the sql database, every subsequent call will just return data directly from redis, and not try to access the sql database at
all.
In the azure console for the sql database in question, I see 1860 successful connections and 11 failed connections, which does not explain the massive failure rate I am seeing.

Thanks for sharing your tips on this forum, as it will be useful for other users, that run into this issue.
Feedback like this will also help us improve error reporting in the next release, as missing class files in the packaged application is a common issue when developers are moving from the embeded oc4j instance packaged with JDewveloper to standalone instances.
-Eric

Problem in Getting Long Text After uploading LT using CREATE_TEXT in CORS

Hi Gurus,
i am uploading long text for Reason for cancellation in CORS Transaction through CREATE_TEXT.
after uploading this text by using this FM CREATE_TEXT i am seeing the long text what ever i uploaded through CREATE_TEXT , i am unable to see first 40 characters of that long text.
if anybody faced this problem earlier please guide me to resolve this problem.
Thanks & Regards
Venkata Ramesh J

Hi,
can you please check this link
Replacing the text created in create_text
Thanks
durga.K

After uploading file in BLOB using webutil file on system locked?

I uploaded file in BLOB using webutil upload utility. But after uploading it locks the file and i cannot delete the file unless i close the iexplorer window.
Is there any way to unlock the file and delete it with out closing the application(iexplorer). If any body knows please reply.
Regards,
Muhammad Qazzafi

can you post the statements, which you use for the upload ?
thx
Gerd

SWF not working properly after upload

I have a Flash gallery that works locally but not after upload. I added several photos to the xml file and only the original 8 jpgs are displayed.
http://federalhomecompany.com/bricktest/fireplaces.swf
Here is the html file... http://federalhomecompany.com/bricktest/federSB_portfolio_residential_fireplaces.html
Can someone tell me what would cause this? Thanks in advance

Thanks kglad!!!!
I actually did upload the pics but the extensions were upper case - all is well now thanks to you pointing me in the right direction
Happy New Year!!!

ICal - Entourage failure after upload of 10.5.5

Similar Messages

Maybe you are looking for