ICal Error: "No virtual host found for iCal Service" - Help!

Trying to set up iCal on OS X Server 10.5.6
Server is up and running and successfully providing web services on its FQDN. Server is not currently used to support network users / services, but as and when it does it will be the Master Opendirectory server.
I have created a couple of test accounts on the server (simply in the Users group) and enabled both for Calendar Access.
I have provided the details of the FQDN on the iCal page, and checked that the default port (8008) has been opened in the firewall.
In web services there is one virtual domain (using name based virtual server) and the default domain in operation. Both appear to be functioning as would be expected.
When I click on 'start service' for iCal, I get this error.
"No virtual host found for iCal service"
I cannot find any information about this in iCal manual, or online documentation. Can anyone here provide pointer to where this information is, or what it means?
Would be most grateful.

Hey there,
See if any of the solutions provided in either of these older threads can steer you in the right direction.
http://discussions.apple.com/thread.jspa?threadID=1201737
http://discussions.apple.com/thread.jspa?threadID=1242823&start=0&tstart=-3
B-rock

Similar Messages

No virtual host found for iCal service

Hi all,
I recently created a link aggregation for our xserve, in doing this i needed to demote my open directory to standalone and then promote it back to master (archive and install users).
In doing this it appears that iCal has spat the dummy, in that our users could not connect. I turned iCal off and on in the hope that this correct it, however when trying to turn back on I get the error "No virtual host found for iCal service..."
Check host name reveals that names match.
Any ideas guys, I'm happy to fully restart iCal (events are backed up), however I can't even get it started yet!
Thanks,
Nige

Hi
+". . . ours is a standalone server with Open Directory off . . ."+
http://manuals.info.apple.com/enUS/iCal_Service_Admin_v10.5_2ndEd.pdf
Page 13 - Minimum Requirements. As ever how well it all works will come down to how you've configured DNS Services. Get that bit right and everything else will follow.
Tony

"No Virtual Host Found for iCal Service" help?

I have Leopard Server installed.
When I try to "Start iCal" in Server Admin, "No Virtual Host Found for iCal Service" pops up.
Also, I can't configure the server in the Directory Utility. Utility claims the ip address is incorrect, even though I know it is.
HELP!!!

I just solved this problem by creating a Kerberos record for the iCal server in my Open Directory server's Kerberos realm. The iCal server can join your Open Directory's Kerberos realm through its Open Directory pane's 'Join Kerberos' button. (I think this could be presented better.)
If you're not using Kerberos, then you'd probably solve the problem by selecting 'Digest' as the 'Authentication' method.

ICal server: "no virtual host"

iCal won't start. When I try to start iCal service I get:
"no virtual host"??

I'm getting similar problems. I HAVE activated DNS, and setup a primary zone with a machine record for the xServe with it's local IP address. And I reset the TCP-IP settings for the server to point to itself for DNS. (I also setup DNS forwarding in the DNS control panel so that general requests are forwarded to our usual service provider DNS servers.)
Use of network utility --> lookup confirms that this entry is correct.
HOWEVER, when I this record as my hostname (server1.myexample.com) I get the following error: "No virtual host found for iCal Service".
Do I need to do anything else in my DNS to make this work? Do I need some form of alias or service record? Am I using the wrong thing as my hostname for the iCal configuration? is that additional information I can provide to help get a diagnosis?
Thanks in advance for any thoughts...

No Virtual Host Found

Ok soooo
Like everyone else.. ok like some others here... iCal seems to be a major sticking point with 10.5 Server. I'm not an expert, but have been the server admin for several years now so am kind of learning as I go. Here's what I've done:
1. Clean install of 10.5 "advanced"
2. Updated to 10.5.1
3. Created a few users
4. Created a few groups
5. Have AFP, mail, web, SMB, chat , and half of VPN up and running correctly.
6. When trying to start iCal, I get the error message "No Virtual Host Found"
Most of these posts deal with Open Directory, so I enabled that service, went thru the setup for it, and now OD seems to be working.
But I STILL can't get iCal to start running.
This is a very small office... there is only 1 server, since we are not using it as a NAT, there is no DNS running.
So what am I missing?

Well out of sheer frustration, I once again started from scratch. While both the "Standard" and the "Workgroup" setups seem similar, I opted for the "Standard" setup to start.
I believe the one key element to success is to choose Open Directory as one of the first services to set up... there is a list you check during setup, and Open Directory is one of them.. I checked it, and iCal, and File and Print Sharing, and most likely e-mail as the only services for the server to set up and auto configure for me.
Once that was done, I added a user or two, and things became much clearer.
On 10.5 Clients, go to the Utilities folder, and look for an application called Directory Utility, and launch it.
It's possible that your server may have been found by the client, but if it is, I'd elect to delete it and start afresh just to be sure everything is correct.
For clients INSIDE the office, when asked for the server name or IP address, I entered the IP address of the server, and it went into auto pilot after that, asking me if I wanted it to configure the client computer.... in my case, I checked Yes.
It will then configure the client to use the services you've set up on the server(so, in reality, you may want to wait 'til you have more services up and running).
It asks for your username and password on the server, as well as the password for the client machine. As I understand it, if the client password is different, it will change the password on the server to match(but my password is the same, so can't promise what happens when they are different).
It DID configure both e-mail and iCal to work correctly with the server. In iCal there is a new listing on the left called yourdomain server, and one default calendar there. You can add more if you like.
Once you have several users up and running, in the client iCal prefs, under the Accounts tab, there is a tab for "Delegation". This is were you allow other users to see and /or write to your calendar. Click the "Edit" button, and the rest should be cake. The users must be valid users on the server. Likewise, there is a window showing accounts you can access and the privileges you have there.
In my case, I'm not so much working with others, but am looking for a replacement for the iCal sync function of Dot Mac. I was able to log into my account on the server from a computer at work, one at home, and a laptop. All three reflect changes made on any of the client computers I operate.
(As a note... for the laptop, which is sometimes IN the office and sometimes OUT of the office, as well as the computer at home, in Directory Utility, I used the FQDN of the server. This connects to the server from outside the LAN and works just the same as if I were inside.)
Now if only there was an option of what to publish in the server.... with Dot Mac, I elect to publish only that there is an event.. no name or anything else... this allows clients to see when I'm busy, but not who I'm busy with. Unless I can figure out how the calendar can be seen by anyone on the web, AND I can hide the event info, I'm stuck on Dot Mac.
I WISH I had an answer for the "no virtual host" issue. I did run into a problem with a web site, and found the only way to fix it was to delete the web site entry in the Server Admin, then re-instate it again, and all was well. I'm thinking it MAY be possible to delete the iCal service in Server Admin, save changes, re-start the server, then add the iCal service again.... its possible that will get you around the No Virtual Host message, but since I started over, I can't test to tell you if it will or wont work. I can tell you that there is nothing in the iCal Server Admin that is vitally different that what was there before, so I'm at a loss about the no virtual host message.
Soooo that's my iCal service story. Long, hard, bitter, and difficult. I've said this before, but Apple really need to create some type of "Re-Initialize" server button to put you back with a fresh install, instead of having to re-install it. I've lost track of how many times I've done that with 10.5, and know I had to do it with 10.2, 10.3 and 10.4 as well. For now, I'm on the Standard Setup, but intend to migrate to the Advanced after this seems stable AND I've got a good working copy on a separate drive to go back to should things go haywire. I can say that while I've have had to use Server Admin some(for the firewall for sure), there seems to be no interference between the settings I make in Server Prefs and Server Admin.
Good luck to you all!

Error message: Host process for windows services stopped

I recently had to install a new hard drive into my laptop. I am running windows vista and have installed all updated drivers. After installing itunes and uploading my backed up library, I went to play a song and I got the error "host process for windows services stopped working and was closed." Movies play fine. I have searched but have not found anything. Any help would be greatly appreciated.

Q I just upgraded to a new mobo and CPU, the EVGA X58 SLi and i7 920, and this issue still persists! That means it is either the sound card or Steam. The drivers on the CD have no issues, only the newer ones do. So by deduction there is something wrong with the new drivers, but I need them to not BSOD in OpenAL!

Error-No Warehouse FC found for plant 1010/valuationh classs 3001

Hi,
Funds Management is active in my company code.Budgeting is on cost center level.
My question is in many PO's and PR's we dont input account assignment as cost center because we dont require to put in it so now while creating PR for a BOM material im getting error "No warehouse FC found for plant 1010/valuation class 3001"
When i select account assignment as Cost center it is working but i dont want to select that assignment as per requirement.
And when i select Account assignment as UN (unknown that is also working fine.
What is the possible solution to get rid iof this error.
Thanks
Deepa

consider it as a high priority

Error CREDIT_SEGMENTS_ADD COIOB NOT FOUND FOR object CC...

Hi All,
My user is geting the ERROR while running the actual OH calculation through CJ45 as below:
Error CREDIT_SEGMENTS_ADD COIOB NOT FOUND FOR object
Message NO k5011.
As this is more ralaing to the costing sheet, this refers to controlling module.
We have verfied the Note 515426, but the correction were delivered in 4.7 itself. My client is using the 6.0 verion.
Can anybody suggest the reason for the above error.
Thanks & Regards
Shankar

HI,
whats the message class, message number?
BR Christian

Virtual Host Name for CM

Hi ,
R12.1.3 & 11gR2 DB
I have a qucik question . When We have Virtual Host Name for setting , What Should be the node name for ICM in Concurrent Manager Admin form.
In One of our Instance : For ICM & Other Manager , its Virtual Host Name
For Other : ICM : Physical Host Name & Other Manager Virtual Host Name .
Which is good. We having a issue with ICM on both Nodes , in every minutes is going down and come up automatically.
Regards
Sourabh Gupta

Hi Hussein,
Thanks a lot. I have already review these document.
Is Auto Failover With Virtual Hostnames For Concurrent Processing Servers Supported In 11i Or R12? (Doc ID 456540.1)
Adding an Alias Hostname with Oracle E-Business Suite Release 12 (Doc ID 603883.1)
Concurrent Processing - CONC-SM TNS FAIL In Internal Concurrent Manager (ICM) Log File With Virtual Hosts Configuration [ID 961216.1]
ICM Not Starting: Node Name not Registered [ID 602942.1]
I am curious what should be the node name in concurrent manager Administrator form.
W ether is should be the virtual host name or physical host name.
I have just checked with few people , Some Says ICM node name should be Physical server name & Other CM name can be Virtual name. I am not sure on what basis people are saying.
Few says node name should be the physical host for every CM.
Note Sure what is correct & best configuration.
Regards
Sourabh GUpta

A135-S4527 Host Process for Windows Services stopped...

I have started getting a Windows error: Host Process for Windows Services stopped working and was closed. Laptop runs fine except my network connection says Connection Status: Unknown The service to detect this status is turned off and McAfee stopped working. Can't run any of the MS tools either. I am suspicous of conficker e but don't know how to detect or remove it. Have seen the b variant on an XP machine at work, but the tools we used on it don't work on Vista.
I am running Vista Home Edition (came on Laptop) upgraded to SP1 with auto-updates on. McAfee was also set for auto-updates and nightly full scans, active e-mail and internet scanning. No recent software downloads except for updates.
Have been having the issue since about April 28. Tried to restore but no dates exist past May 5. Tried the F8 Startup recovery no problems found. Have tried restarting services but they quickly stop again. Uninstalled McAfee and tried AVG. It allowed defintion updates and I scanned all files. No viruses, trojans or malware detected.
Any suggestions? I have a tasklstserv file I can copy and paste if it will help.

That's a bad-sector event. At a command prompt (cmd.exe), run chkdsk /r.
Event ID 7 Source Disk
But it doesn't seem likely that's the cause of the message. When you get another one, note the time and check the Application and System logs for entries at that exact time.
Thanks for the detailed information.
What virus protection do you use?
-Jerry

Generic Host Process For Win32 Services Has Encountered a Problem and Needs to Close - J6480

Computer: eMachines T3025 Athlon
OS: Win XP SP3 (recent clean install)
Printer: HP J6480 on wireless network
Printer prints and scans fine wirelessly. I am using the "small footprint" HP drivers to print and scan.
After some hours with printer connected to the computer wirelessly and printing or scanning, I eventually get the
'Generic Host Process For Win32 Services Has Encountered a Problem and Needs to Close' error message and cannot print or scan any longer unless I shutdown and restart Windows.
I have implemented all the fixes (download, reinstall, etc.) listed for this printer on the hp.com site - namely
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00273968&tmp_task=solveCategory&lc=en&dlc=en&cc...
with the exception of changing the firewall setttings to allow hpqtra08.exe to run. This file is not found on my system in my install. The files that are allowed to bypass the firewall are shown below (duplicates listed as shown on my screen)
hpoews01.exe
hponicifs01.exe
hponicifs01.exe
hponicifs01.exe
hposid01.exe
hpqkygrp.exe
hpqtax08
hpznui08.exe
hpznui08.exe
hpznui08.exe
Per the Firewall bypass instructions, the files available in the Digital Imaging\bin location on my machine are
hpiscnapp
hpoews01
hposid01
hposvc08
HpqApKil
hpqkygrp
hpqpprop
hpqqpawp
hpqtax08
hpqtbx01
HPqTrMgr
hpqwrg
hpsjrreg
What else do I need to do to solve this problem once and for all ?

Hi,
Please try to update the hot fix then monitory the status again, at same time that error ome times also can cause by virus infection some time please back up important files
update your AV soft then scan the virus.
The relate hot fix:
The Service Host process may stop unexpectedly in Windows Server 2003
http://support.microsoft.com/kb/932762/en-us
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

In service order Issu:No account assignment found for this service process

Issue:No account assignment found for this service process
An error has occurred in the system RT1400LS while copying the document
Message no. CRM_ORDER_MISC 020
Diagnosis
Errors have occured while transferring the document into another system. Remove the error messages from the enclosed log.
Transmission log
No account assignment found for this service process (Notification E CRM_SRV_LOG_EXT_OLTP 008)
While we created the service order as a fallow up document of the quotation system unable to create the PR. System showing the above error in the service order.
We created the service order with same items directly not as fallow up document to quotation PR created with out any fail.
As per my analyses above error because system unable to find out the Internal order to create the PR hence we created service order as a fallow up document of the service quotation.
Revert require data to understand the issue more.
Best Regards,
Prakesh

Dear Gurus,
Thanks for your update. we checked as per your suggestion but the issue is PR is not determining the IO while creating the PR.
We used the different item cat in quotation and service order system generating the PR, But our Clint want to use the same item cat in the both service order and quotation.
If we created the quotation after that service order with the service line item and spare part line item system creating the IO (internal order) but PR not generating.
Please help me in this scenario what should we do.
Best Regards,
Prakesh.

I keep getting a popup that says"host process for window services has stopped"

hp s5220f
microsoft windows 7 home premium edeition (64 bit)
I keep getting a popup window that says "host process for window services has stopped"
How can I get rid of this?

Hello tribefanz,
Sounds like a compatiblity issue with a program and Windows 7. We need to find out what program is causing the issue though. We can do that through event viewer
1. Click the start orb
2. Select Control Panel
3. System and Security
4. Under Administrative Tools select the Event Viewer
In the event viewer you will want to drill down into the Application and System logs and look for anything with a Red X that says Error. Identify the program causing the problem and then we can go from there.
If I have helped you in any way click the Kudos button to say Thanks.
The community works together, click Accept as Solution on the post that solves your issue for other members of the community to benefit from the solution.
- Friendship is magical.

Error 'No tax code found for difference' in Posting Vendor Invoice IDOC

Hi All,
I am getting error message 'No tax code found for difference' while posting Vendor Invoice IDOC into SAP. IDOC type is INVOIC02. There is no difference in PO price, Invoice price and even Standard price. then why this error message? Other Vendor EDI settings are done ( OBCA, OBCD, OBCE etc). Is there any thing specific to be done in the config for this error?
IDOC has PO as reference document.
I looked into several threads in SDN forum but could not find proper solution
Can any ine help me with this issue?
Thanks in advance
Hari

Hi
You might be missing the tax code for uploding through IDOC
so you can use the t.code we02 and give the doc and find the error
go to the WE19 to edit the tax code
and USE the t.code BD87 to select the doc and process it
thanks
Madhu

BPM (IP) Error: "No object type found for this message [...]"

For your info.
I have searched SDN today for a solution to an error message found in XI message monitor (trx SXI_MONITOR) when sending a message to BPM:
<b>No object type found for this message; check the activation of the corresponding process</b>
Well, I found a lot of threads, but with no good answer for me.
So, here's my self-solution: I was just missing the Interface Determination (really don't know why) bringing from Outbound to Abstract message interface. So XI message was definitely correct.

Hi,
Make sure that the first receive step in your integratiopn process uses the abstract interface that u defin in the interface determination.
Also check if you have used all the objects that you have created. Some times 'No object type found' error happens if your BPM is not activated.
Also check the activation log and see if there are any errors. Refrech the cache in SXI_CACHE. Check if the return code is 0.
Hope this helps.
Regards.
Praveen

ICal Error: "No virtual host found for iCal Service" - Help!

Similar Messages

Maybe you are looking for