ICal erroring out?

Our university uses exchange for our e-mail and calendar, but we use iMail and iCal. iCal cannot seem to handle a calendar that is quite full. Is there anything we can do?

Dobry wieczór!
Ok thats all the Polish I can remember. My mother would be horrified.
Moving on.
This could be an issue with the iCal database. It could also be an issue with the Sync Services database that runs in the background and interacts with iCal.
Lets try the basics first:
First make an iCal backup, File > Export > Archive.
Remove the following to the trash and restart your computer:
Home > Library > Caches > ical or com.apple.ical
Home > Library > Calendars > Calendar Cache, Cache, Cache 1, 2, 3, etc. (Do not remove Sync Cache or Theme Cache)
Home > Library > Preferences > com.apple.ical (There may be more than one of these. Remove them all.)
__NOTE: Removing these files will remove any shared (CalDAV) calendars you may have access to. You will have to re-add those calendars to iCal > Preferences > Accounts.
Hope that helps.

Similar Messages

ICal errors constantly pop up

Help, I use iCal on my MacBook Pro, but my calendar is really full. And therefore messages are constantly poping up, invitee error, cannot connect, etc. Is there anything I can do, as I have a ton of reminders and a ton of meetings. Since iCal errors out so much, I had my IT deptartment install parallels and then Microsoft Outlook and this works wonderfully.
Error messages:
Calendar can’t save the event “specific meeting name” to the Exchange server.
“specific reminder” had invitees not recognized by the server. There were no invitees?
Calendar can’t save the event “reminder name.” to the Exchange server.
I am on OS X
2.5 GHz Intel Core i7
8 GB ram
Any ideas as I have had my IT department looking for a solution?
Holly

That did it, actually. I had tried resizing it to make it smaller, but I guess I didn't go to enough extreme. I dragged the corner and made it just about as small as it would go, and the window popped up right where it should. I brought iCal back up to normal size, and there the edit window is.
An odd fix, but a fix indeed. Thanks!

ICal error - can't see the calendars on opening...

iCal error - can't see the calendars on opening... unless i change the view - but then still the portlet in the top left hand corner remains blank.
Re-installed the whole OSx system from original disks and still the same problem.
cleared out the cache files, including trying to delete the metadata files... taken to my local Apple Centre (Academy) but no sucess so far.
Any ideas? Is it because i have around 8 calendars? Is that too many?
Could it be 'cos I sync with Missing Sync for my Palm TX?
H E L P !!
Powerbook G4 Mac OS X (10.4.7)

When a user launches iCal, they may have one of the following symptoms:
* When iCal is launched the calendar is blank -- no calendars are listed on the left and no events appear in the day/week/month views
* Switching views allows all events to appear but the calendars on the left are still missing
* User can create a new event and designate a calendar but when the event is saved it cannot be seen
* Clicking in the blank space where the calendars are supposed to be has no effect.
This issue is a Sync Services issue and not directly related to The Missing Sync. Mark/Space has identified a couple of solutions to this problem that others have reported. For more information, see: http://www.macfixit.com/article.php?story=20060207074628694
1) Quit iCal
2) Locate the folder, User/Library/Application Support/iCal/Sources/ and delete the contents
3) After deleting the files from this folder, lock the "Sources" folder. Do this by navigating up one level and selecting the "Sources" folder. Perform a "Get Info" (either through the "File" menu or by pressing Command-I with the "Sources" folder selected) then click the lock icon.
4) Launch iCal and your calendars should reappear. Note that the relaunch of iCal will create a default 'Home' and 'Work' calendar, so make sure none of your calendars have the same names as the default .
Do some backups first
Follow those simple steps
5) Go to Address Book, click on 'File' menu and choose 'Back up Address Book'. Go to iCal, click on 'File' menu and choose 'Back up database'.
6) Go to Missing Sync and double click on the Backup Conduit and set it to backup all databases. Then run the sync with just that Backup conduit selected, disable all other conduits.
7) Go to: /Users/<user name>/Documents/Palm/Users/<hotsync name>/ now hold the 'ctrl' key and click on the /Backups/ folder. Choose the option to 'Create Archive of "Backups"'. This is to safeguard your backed up data in case anything goes wrong.
Now 'Reset Sync History' using the iSync preferences option. The first sync will likely be slower.
8) Launch iSync
9) Click on the iSync menu
10) Choose Preferences (make sure the "Enable syncing on this computer" is checked)
11) Click the 'Reset Sync History' button. Read and follow the onscreen directions.
12) This may launch iCal. Also the status of the reset is showing in the iSync display. When the reset is complete quit both iSync and iCal.
Launch Missing Sync and enable the Mark/Space Events and Tasks conduits and set them to Desktop overwrite Handheld. Disable all other conduits.
Then sync, when you do, you will get a dialog box with an orange iSync icon on it. Check the box to erase the device, then click the 'Allow' button. It will overwrite your device. You will get one for events, one for tasks, and one for contacts. The next time you sync .mac or other devices that sync with iSync like an iPod, you will get these same dialog boxes for their databases and you should check the box and click 'Allow' in those cases as well.
If you press the don't allow button you will need to reboot your computer.

Ical error -14

I think this is a client side problem with iCal 4.0.1 in OS 10.6.2, because I'm able to use my exchange calendar via iCal on other machines. The broken machine is stuck in an error loop:
+The account "Exchange" currently can’t be modified. To discard your changes and continue using the version of your calendars that’s on the server, click Revert to Server. To save your changes on your computer until the problem is resolved, click Go Offline.+
Clicking Revert or Try Again just pops up the dialog again with a similar error about another event. The system log message is
iCal: error = Error Domain=CalExchangeErrorDomain Code=-14 ... iCal can’t delete an occurrence from the repeating the event... from the Exchange server.
Anyone know what the error code means, or what can be done to get out of this loop?

I ran into the same problem with iCal in Mac OS X 10.6.3. To fix it, I quit iCal, removed ~/Library/Calendars/Calendar Cache, then restarted iCal.

After upgrade Server 3.1.1 : ical:error = "CANNOT_LOAD_BUNDLE_ERR"

All services were working fine until last night upgrade to Server version 3.1.1
Calendar and AddressBook now broken
Any idea how to fix ?
The details are as follows :
serveradmin status ical
ical:error = "CANNOT_LOAD_BUNDLE_ERR"
serveradmin status addressbook
addressbook:state = "STOPPED"
addressbook:setStateVersion = 1
addressbook:readWriteSettingsVersion = 1
I do not know where the addressbook.log is but in
the ical log : /var/log/ical/caldavd/servermgr_calendar.log
I find
[cal] 30/03/14 11:27:56 GMT+2 : Asking calendarserver_config for a readConfig
[cal] 30/03/14 11:27:57 GMT+2 : Returned from calendarserver_config
[cal] 30/03/14 11:27:57 GMT+2 : Error while parsing calendarserver_config output
Error Domain=NSCocoaErrorDomain Code=3840 "The data couldn’t be read because it isn’t in the correct format." (Unexpected character I at line 1) UserInfo=0x7fd6f9816720 {NSDebugDescription=Unexpected character I at line 1, kCFPropertyListOldStyleParsingError=The data couldn’t be read because it isn’t in the correct format.}
[cal] 30/03/14 11:27:57 GMT+2 : Could not get settings from calendarserver_config
[cal] 30/03/14 11:27:57 GMT+2 : Read settings returning:
[cal] 30/03/14 11:27:57 GMT+2 :   configuration = {
[cal] 30/03/14 11:27:57 GMT+2 :   }
[cal] 30/03/14 11:27:57 GMT+2 :   readStatus = 0
[cal] 30/03/14 11:27:57 GMT+2 : getState returning: {
    calendarState = STOPPED;
    contactsState = STOPPED;
    readWriteSettingsVersion = 1;
    setStateVersion = 1;
    state = STOPPED;
[cal] 30/03/14 11:27:57 GMT+2 : setState returning: {
    calendarState = STOPPED;
    contactsState = STOPPED;
    readWriteSettingsVersion = 1;
    setStateVersion = 1;
    state = STOPPED;
[cal] 30/03/14 11:27:57 GMT+2 : Command setState duration 67.91 seconds
[cal] 30/03/14 11:27:57 GMT+2 : setState releasing request lock
[ab] 30/03/14 11:27:57 GMT+2 : setState returning: {
    readWriteSettingsVersion = 1;
    setStateVersion = 1;
    state = STOPPED;
[ab] 30/03/14 11:34:17 GMT+2 : Read Settings
[cal] 30/03/14 11:34:17 GMT+2 : Command readSettings received
[cal] 30/03/14 11:34:17 GMT+2 : readSettings attempting to acquire request lock...
[cal] 30/03/14 11:34:17 GMT+2 : readSettings acquired request lock
[cal] 30/03/14 11:34:17 GMT+2 : Read Settings
[cal] 30/03/14 11:34:17 GMT+2 : calendarServerOperationWithRequest
[cal] 30/03/14 11:34:17 GMT+2 : Calling agent...
[cal] 30/03/14 11:34:33 GMT+2 : Agent failure: The request timed out.
[cal] 30/03/14 11:34:33 GMT+2 : Agent returned...
    error = "The request timed out.";
[cal] 30/03/14 11:34:33 GMT+2 : Asking calendarserver_config for a readConfig
[cal] 30/03/14 11:34:34 GMT+2 : Returned from calendarserver_config
[cal] 30/03/14 11:34:34 GMT+2 : Error while parsing calendarserver_config output
Error Domain=NSCocoaErrorDomain Code=3840 "The data couldn’t be read because it isn’t in the correct format." (Unexpected character I at line 1) UserInfo=0x7fc4c8c4f4d0 {NSDebugDescription=Unexpected character I at line 1, kCFPropertyListOldStyleParsingError=The data couldn’t be read because it isn’t in the correct format.}
[cal] 30/03/14 11:34:34 GMT+2 : Could not get settings from calendarserver_config
[cal] 30/03/14 11:34:34 GMT+2 : Read settings returning:
[cal] 30/03/14 11:34:34 GMT+2 :   configuration = {
[cal] 30/03/14 11:34:34 GMT+2 :   }
[cal] 30/03/14 11:34:34 GMT+2 :   readStatus = 0
[cal] 30/03/14 11:34:34 GMT+2 : Command readSettings duration 16.62 seconds
[cal] 30/03/14 11:34:34 GMT+2 : readSettings releasing request lock
[ab] 30/03/14 11:34:34 GMT+2 : readSettings returning: {
    configuration =     {
    readStatus = 0;
[ab] 30/03/14 11:34:59 GMT+2 : getState begin
[cal] 30/03/14 11:34:59 GMT+2 : Command getState received
[cal] 30/03/14 11:34:59 GMT+2 : getState attempting to acquire request lock...
[cal] 30/03/14 11:34:59 GMT+2 : getState acquired request lock
[cal] 30/03/14 11:34:59 GMT+2 : getState begin
[cal] 30/03/14 11:34:59 GMT+2 : Read Settings
[cal] 30/03/14 11:34:59 GMT+2 : calendarServerOperationWithRequest
[cal] 30/03/14 11:34:59 GMT+2 : Calling agent...
[cal] 30/03/14 11:35:15 GMT+2 : Agent failure: The request timed out.
[cal] 30/03/14 11:35:15 GMT+2 : Agent returned...
    error = "The request timed out.";
[cal] 30/03/14 11:35:15 GMT+2 : Asking calendarserver_config for a readConfig
[cal] 30/03/14 11:35:15 GMT+2 : Returned from calendarserver_config
[cal] 30/03/14 11:35:15 GMT+2 : Error while parsing calendarserver_config output
Error Domain=NSCocoaErrorDomain Code=3840 "The data couldn’t be read because it isn’t in the correct format." (Unexpected character I at line 1) UserInfo=0x7fb901c65a50 {NSDebugDescription=Unexpected character I at line 1, kCFPropertyListOldStyleParsingError=The data couldn’t be read because it isn’t in the correct format.}
[cal] 30/03/14 11:35:15 GMT+2 : Could not get settings from calendarserver_config
[cal] 30/03/14 11:35:15 GMT+2 : Read settings returning:
[cal] 30/03/14 11:35:15 GMT+2 :   configuration = {
[cal] 30/03/14 11:35:15 GMT+2 :   }
[cal] 30/03/14 11:35:15 GMT+2 :   readStatus = 0
[cal] 30/03/14 11:35:15 GMT+2 : getState returning: {
    calendarState = STOPPED;
    contactsState = STOPPED;
    readWriteSettingsVersion = 1;
    setStateVersion = 1;
    state = STOPPED;
Thanks for suggestions or fixes
p.

Replying to myself:
There was probably some mismatch between old and new stuff. Actually ical appeared in servives list but it does not exists anymore and is called calendar.
So "CANNOT_LOAD_BUNDLE_ERR" makes sense as it just does not exists.
Now settings:calendar -> empty
Attempts to fix that have failed for now.
Any comments ?

Payables Open Interface Import getting errors out

Hello All,
I am trying to run "Payables Open Interface Import" program to upload the invoice but the program is getting error out, in the log file at the end i am getting the below error:
(Insert ap inv dists 1a) Inside the insert function
(Insert ap inv dists 1) Insert into ap_invoice_distributions
(Insert ap inv dists 1) Insert into ap_invoice_distributions
ORA-00001: unique constraint (AP.AP_INVOICE_DISTRIBUTIONS_U1) violated
Insert_ap_inv_dists<-Create_lines<-Import_invoices<- Before report trigger
(Create Lines 22) Insert into ap_invoice_distributions
create_non_item_lines<-Import_invoices<- Before report trigger
Any one faced this kind of issue?
any suggestions to resolve this.
Thanks & Regards
Aboothahir

Pl post details of OS, database and EBS versions.
Pl see these MOS Docs
Payables Open Interface Error ORA-00001: unique constraint (AP.AP_INVOICE_DISTRIBUTIONS_U1) violated          (Doc ID 357784.1)
APXIIMPT Payables Open Interface Import Fails ORA-00001          (Doc ID 353052.1)
Unique Constraint Violated Importing Invoices With Multi Line Distribution Set          (Doc ID 386323.1)
HTH
Srini

Runtime constant (Filename) errors out in BPM

Hi,
I have a BPMCollectTime scenario to collect the Source files. The filename (Message Mapping/Transformation) from the files is captured in TRANSFORM STEP(before sending them out from BPM). The file is sent to SEND step one at a time.
Question : Filename of the source file is captured through user defined function.
Following is the code.
================
String v_result_time; //test Variable
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
if (key == null) { v_result_time= "Create Key Failed";}
else
{v_result_time= "Create Key worked";
String valueOld = conf.get(key);
v_result_time = valueOld;
return v_result_time;
The Mapping gives a runtime error in the BPM. This is a sporadic error.
I have selected the Adapter specific attribute(File name).
The BPM errors out sometimes? I am not sure if I am missing any setting. If I delete the work item and run the same scenario it works.
Question 1 : What is the cause of the above error?
Question 2 : Does BPM support Adapter specific attribute such as filename?
Kindly Advice.
Thanks,
Gowri

Hi Everyone,
Thanks for all the help.
DTN will not change the response filename to source filename. This option cannot be used. The correlation id is defined as response file name. Response filename is fixed for invoice file.
Here is the example.
For invoice file name HDTN20070430163110.TXT, response file received is nav1_2b5.rsp file. For HDTN20070430163314.TXT , response file is nav1_2b5.rsp
So my correlation id is dummy fixed value. I have known the fact that it is not possible to use context object filename.
Bhavesh - I have defined transform step for accessing filename using dynamic configuration. Following is the code used in mapping.
================
String v_result_time; //test Variable
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
if (key == null) { v_result_time= "Create Key Failed";}
else
{v_result_time= "Create Key worked";
String valueOld = conf.get(key);
v_result_time = valueOld;
return v_result_time;
====================================
BPM errors out sometime with following error
Component mapping has returned error.
com/sap/xi/tf/_MM_DTNData_2_DTNFilename_java.lang.NullpointerException.
Error: Exception CX_MERGE_SPLIT occurred (program: CL_MERGE_SPLIT_SERVICE========CP, include: CL_
If I delete this workitem and repeat the same scenario, it works. I have still not understood, why the scenario works sometime.
Kindly Advice.
Thanks,
Gowri

Comma delimited in Sql query decode function errors out

Hi All,
DB: 11.2.0.3.0
I am using the below query to generate the comma delimited output in a spool file but it errors out with the message below:
SQL> set lines 100 pages 50
SQL> col "USER_CONCURRENT_QUEUE_NAME" format a40;
SQL> set head off
SQL> spool /home/xyz/cmrequests.csv
SQL> SELECT
2 a.USER_CONCURRENT_QUEUE_NAME || ','
3 || a.MAX_PROCESSES || ','
4 || sum(decode(b.PHASE_CODE,'P',decode(b.STATUS_CODE,'Q',1,0),0)) Pending_Standby ||','
5 ||sum(decode(b.PHASE_CODE,'P',decode(b.STATUS_CODE,'I',1,0),0)) Pending_Normal ||','
6 ||sum(decode(b.PHASE_CODE,'R',decode(b.STATUS_CODE,'R',1,0),0)) Running_Normal
7 from FND_CONCURRENT_QUEUES_VL a, FND_CONCURRENT_WORKER_REQUESTS b
where a.concurrent_queue_id = b.concurrent_queue_id AND b.Requested_Start_Date <= SYSDATE
8 9 GROUP BY a.USER_CONCURRENT_QUEUE_NAME,a.MAX_PROCESSES;
|| sum(decode(b.PHASE_CODE,'P',decode(b.STATUS_CODE,'Q',1,0),0)) Pending_Standby ||','
ERROR at line 4:
ORA-00923: FROM keyword not found where expected
SQL> spool off;
SQL>
Expected output in the spool /home/xyz/cmrequests.csv
Standard Manager,10,0,1,0
Thanks for your time!
Regards,

Get to work immediately on marking your previous questions ANSWERED if they have been!
>
I am using the below query to generate the comma delimited output in a spool file but it errors out with the message below:
SQL> set lines 100 pages 50
SQL> col "USER_CONCURRENT_QUEUE_NAME" format a40;
SQL> set head off
SQL> spool /home/xyz/cmrequests.csv
SQL> SELECT
2 a.USER_CONCURRENT_QUEUE_NAME || ','
3 || a.MAX_PROCESSES || ','
4 || sum(decode(b.PHASE_CODE,'P',decode(b.STATUS_CODE,'Q',1,0),0)) Pending_Standby ||','
5 ||sum(decode(b.PHASE_CODE,'P',decode(b.STATUS_CODE,'I',1,0),0)) Pending_Normal ||','
6 ||sum(decode(b.PHASE_CODE,'R',decode(b.STATUS_CODE,'R',1,0),0)) Running_Normal
7 from FND_CONCURRENT_QUEUES_VL a, FND_CONCURRENT_WORKER_REQUESTS b
where a.concurrent_queue_id = b.concurrent_queue_id AND b.Requested_Start_Date <= SYSDATE
8 9 GROUP BY a.USER_CONCURRENT_QUEUE_NAME,a.MAX_PROCESSES;
|| sum(decode(b.PHASE_CODE,'P',decode(b.STATUS_CODE,'Q',1,0),0)) Pending_Standby ||','
>
Well if you want to spool query results to a file the first thing you need to do is write a query that actually works.
Why do you think a query like this is valid?
SELECT 'this, is, my, giant, string, of, columns, with, commas, in, between, each, word'
GROUP BY this, is, my, giant, stringYou only have one column in the result set but you are trying to group by three columns and none of them are even in the result set.
What's up with that?
You can only group by columns that are actually IN the result set.

Unable to Capture more than 5 mins, error out of mem msg when rendering

Somebody help me. I have been using my powermac fcp and a mini dv cam for 4yrs no problems. Now when i am trying to capture clips over 5 mins (1 gig) fcp freezes. So Im capturing through Imovie (which is working fine). Dragging clips into fcp to edit. Now when it comes to rendering anything over 5 mins Im getting an error out of memory msg.
Can anyone help me?

You don't say what version of FCP you are using but my guess is you've upgraded QT7 and are running FCP4.5
If that's the case, do a search here for the solution(s). They're ugly.
good luck,
x

In R12 standard Auto Invoice Import program is erroring out

Hi All,
The standard Auto Invoice Import concurrent porgram is erroring out when i run for the source as 'SUM_DIF', in the log messages its showing the following error:
UPDATE RA_INTERFACE_LINES L1
SET REQUEST_ID = :b1,
LAST_UPDATE_DATE = sysdate,
LAST_UPDATED_BY = :b2,
LAST_UPDATE_LOGIN = :b3,
CUSTOMER_TRX_ID = NULL,
INTERFACE_LINE_ID = NVL(INTERFACE_LINE_ID,
RA_CUSTOMER_TRX_LINES_S.NEXTVAL),
SET_OF_BOOKS_ID = NVL(SET_OF_BOOKS_ID, :b4),
LINK_TO_LINE_ID =
SELECT INTERFACE_LINE_ID
FROM RA_INTERFACE_LINES L2
WHERE L2.REQUEST_ID = :b5
AND L2.INTERFACE_LINE_CONTEXT = 'SUM_DIF'
AND L1.LINK_TO_LINE_CONTEXT = L2.INTERFACE_LINE_CONTEXT
AND L1.LINK_TO_LINE_ATTRIBUTE13 = L2.INTERFACE_LINE_ATTRIBUTE13
AND L1.LINK_TO_LINE_ATTRIBUTE14 = L2.INTERFACE_LINE_ATTRIBUTE14
AND L1.LINK_TO_LINE_ATTRIBUTE15 = L2.INTERFACE_LINE_ATTRIBUTE15
AND L1.LINK_TO_LINE_ATTRIBUTE1 = L2.INTERFACE_LINE_ATTRIBUTE1
WHERE NVL(INTERFACE_STATUS, '~') != 'P'
AND (REQUEST_ID IS NULL OR REQUEST_ID IN (:b6)
AND EXISTS
SELECT 'x'
FROM RA_INTERFACE_LINES L2
WHERE L2.REQUEST_ID = :b7
AND L2.INTERFACE_LINE_CONTEXT = 'SUM_DIF'
AND L1.LINK_TO_LINE_CONTEXT = L2.INTERFACE_LINE_CONTEXT
AND L1.LINK_TO_LINE_ATTRIBUTE13 = L2.INTERFACE_LINE_ATTRIBUTE13
AND L1.LINK_TO_LINE_ATTRIBUTE14 = L2.INTERFACE_LINE_ATTRIBUTE14
AND L1.LINK_TO_LINE_ATTRIBUTE15 = L2.INTERFACE_LINE_ATTRIBUTE15
AND L1.LINK_TO_LINE_ATTRIBUTE1 = L2.INTERFACE_LINE_ATTRIBUTE1
len = 1289
Current system time is 18-SEP-2008 21:35:19
APP-AR-11526: ORA-01427: single-row subquery returns more than one row
UPDATE RA_INTERFACE_LINES L1
SET REQUEST_ID = :b1,
LAST_UPDATE_DATE = !
APP-AR-11526: 5069629/ar/src/autoinv/raamil.lpc 1342
UPDATE RA_INTERFACE_LINES L1
SET REQUEST_ID = :b1,
LAST_UPDATE_DATE = sysdate,
LAST_UPDATED_BY = :b2,
LAST_UPDATE_LOGIN = :b3,
CUSTOMER_TRX_ID = NULL,
INTERFACE_LINE_ID = NVL(INTERFACE_LINE_ID,
RA_CUSTOMER_TRX_LINES_S.NEXTVAL),
SET_OF_BOOKS_ID = NVL(SET_OF_BOOKS_ID, :b4),
LINK_TO_LINE_ID =
SELECT INTERFACE_LINE_ID
FROM RA_INTERFACE_LINES L2
WHERE L2.REQUEST_ID = :b5
AND L2.INTERFACE_LINE_CONTEXT = 'SUM_DIF'
AND L1.LINK_TO_LINE_CONTEXT = L2.INTERFACE_LINE_CONTEXT
AND L1.LINK_TO_LINE_ATTRIBUTE13 = L2.INTERFACE_LINE_ATTRIBUTE13
AND L1.LINK_TO_LINE_ATTRIBUTE14 = L2.INTERFACE_LINE_ATTRIBUTE14
AND L1.LINK_TO_LINE_ATTRIBUTE15 = L2.INTERFACE_LINE_ATTRIBUTE15
AND L1.LINK_TO_LINE_ATTRIBUTE1 = L2.INTERFACE_LINE_ATTRIBUTE1
WHERE NVL(INTERFACE_STATUS, '~') != 'P'
AND (REQUEST_ID IS NULL OR REQUEST_ID IN (:b6)
AND EXISTS
SELECT 'x'
FROM RA_INTERFACE_LINES L2
WHERE L2.REQUEST_ID = :b7
AND L2.INTERFACE_LINE_CONTEXT = 'SUM_DIF'
AND L1.LINK_TO_LINE_CONTEXT = L2.INTERFACE_LINE_CONTEXT
AND L1.LINK_TO_LINE_ATTRIBUTE13 = L2.INTERFACE_LINE_ATTRIBUTE13
AND L1.LINK_TO_LINE_ATTRIBUTE14 = L2.INTERFACE_LINE_ATTRIBUTE14
AND L1.LINK_TO_LINE_ATTRIBUTE15 = L2.INTERFACE_LINE_ATTRIBUTE15
AND L1.LINK_TO_LINE_ATTRIBUTE1 = L2.INTERFACE_LINE_ATTRIBUTE1
Error calling raamil()
Error calling raapft()
Thanks,
Ramakrishna.
Edited by: user605279 on Sep 18, 2008 11:59 PM

Ramakrishna
Looks like this is for the tax line (based on the fact that it is trying to update the link_to_line_id). The issue seems to be from the duplicate interface_line_attributes for the two different lines.This leads to this query returning more than one row for the tax line when it is trying to update.
For two different lines, make one of your interface_line_attributes (in this query I see 1, 13, 14, 15) unique.
Thanks
Nagamohan

Time Machine won't back up. Starts of REALLY SLOW, and the errors out.

I've been having a hard time getting time machine to back up. To start off I'll give you my specs and what I have done.
iMac
OS 10.6.6
2.4 GHz Intel Core 2 Duo
4 GB 667 DDR@ SDRAM
320 GB HD
All software updates are current. I am trying to back up to an external Western Digital 1 GB drive connected by USB2. I have formatted the external drive, and set a single partition on that drive from the Disc Utility. I have run disk repair on both the external and local hard drive. I have run disk repair permission on the local drive. I have restarted, after every time. I have done everything listed above multiple times, and have done them all in kinda different orders each time.
My thought is that the issue may not be with the hard drives, but maybe a file its trying to back up. When it starts out for the first time, it tells me that it needs to back up over 100 GB of data. It gets about halfway done, and then errors out. When I try to start it again, it tells me that it needs to backup around 50 GB of data. And this time, its REALLY slow. Like bytes slow, not Mega bytes, or even kilobytes. Bytes. 36 bites backed up, 120 bytes backed up. 2 Kilobytes backed up. SLOW SLOW SLOW.
Then it picks up, and usually gets up to 120 MB, and then gives me this error message "The Backup was not performed because an error occurred while copying files to the backup disk. - The problem may be temporary. Try again later to back up. If the problem persists, use Disk Utility to repair your backup disk."
Its a pretty generic message, and gives me no help in trying to figure out what the problem is. I've been trying again for almost 3 days now, and nothing is working. Is there an error log file that I can go find that would help me a little more?

woody24 wrote:
"The Backup was not performed because an error occurred while copying files to the backup disk. - The problem may be temporary. Try again later to back up. If the problem persists, use Disk Utility to repair your backup disk."
See #C3 in [Time Machine - Troubleshooting|http://web.me.com/pondini/Time_Machine/Troubleshooting.html] (or use the link in *User Tips* at the top of this forum).
Its a pretty generic message, and gives me no help in trying to figure out what the problem is. I've been trying again for almost 3 days now, and nothing is working. Is there an error log file that I can go find that would help me a little more?
Tell Apple about the inadequacy of that message: http://www.apple.com/feedback/timemachine.html

XML Publisher report errors out when RDF report has no data

Hi everyone,
I created a template and attached it to an RDF. When i run the oracle report with the attached template, if the report has 'not data exists' the report is erroring out. is it the normal functionality of XML publiher??. Because i remember at my earlier client i have run some reports for which if 'no data exists' still the program would complete normal but the output would be blank.
The xml output is creating the tags for the elements.
any help appeciated.
Thanks
sam

Hi Sam,
Yes this will happen depending on what the template is repeating on etc. You can handle this quite easily using sub-templates.
Firstly create your normal template as a sub-template (so surrounded by the <?template:TEMPLATE_NAME?> tags)
Then create a second template that contains the text "NO DATA FOUND" as another sub-template.
Create a third template (this will be your main template called by the report), which imports the two sub-templates, then using a choose statement, count the number of occurences of you main repeating group in your XML. If the count = 0 then call the "NO_DATA_FOUND" sub-template, otherwise call the normal sub-template.
I hope this helps, if you need an example I can send you one, just let me know your email address.
Regards,
Cj

Supplier Site Contacts Open Interface Import Program is erroring out.

Hi,
We are on 12.0.4 on solaris 10.
Tomorrow is go-live in one of our client, When we doing data migration. Uploaded the data into Interface table. From there we are running this standard program to push th edata into standard table.
Its erroring out saying:
================
Enter Password:
REP-0069: Internal error
REP-57054: In-process job terminated:Terminated with error:
REP-300: unable to extend temp segment by 128 in tablespace TEMP2
==> SELECT INT.org_id C_Rejected_Org_Id,
===============
I have added 2 GB of Tempfile to the tablespace even though it is erroring in the same. And it is taking too much time to give error.
We are tried with only one record also it is taking 1 hr to give the error.
Please help me out in resolving the same.
Many thanks in Advance..
Supplier Site Contacts Open Interface Import

I believe you hit Bug# 6624764, so you may need to apply (Patch 6624764 - SUPPLIER REPORT ERROS WITH ENTER PASSWORD: REP-0069: INTERNAL ERROR REP-57054).
Please log a SR to confirm this with Oracle Support.
Note: 565898.1 - Oracle Financials Software Updates, Release Update Pack 5
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=565898.1

Supplier Sites Interface errors out -- URGENT!! please help.

Hi All,
The log file has the following message when executing the supplier sites interface import program that errored out:
REP-1419: 'beforereport': PL/SQL program aborted.
I have searched Metalink where they said the Batch Size should be 1000 by default. I did the same but still did not work.
I have made sure that teh vendor_id, vendor_site_code, org_id combination is unique.
I am not sure why I am getting this record. I have to process around 300000 records. When I ran the import progam the first time, it errored out after processing 171000 records. Then when I ran the program again for new records(that were not imported) it errored out after processing 42000 records. I dod not know how to resolve this issue.
Please help!!
Swati

Please check if the following notes are applicable to the issue:
Note: 369443.1 - Supplier Sites Open Interface Import Errs With Rep-1419 Rep-1419
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=369443.1
Note: 369913.1 - Supplier Open Interface Import (APXSUIMP) Errors: Rep-1419
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=369913.1

Auto Reconciliation Errored out in Cash Management for Open Interface

1. When Running the Auto Reconciliation, it errored out:
ORACLE error 1400 in FDPSTP
Cause: FDPSTP failed due to ORA-01400: cannot insert NULL into
("CE"."CE_STATEMENT_RECONCILS_ALL"."REFERENCE_ID")
ORA-06512: at "APPS.CE_AUTO_BANK_REC", line 404
ORA-06512: at line 1
2. When running manual reconciliation, it errored out:
AVAILABLE_EVENT.update_row procedure raised unhandled exception
ORA-01400: cannot insert NULL
FRM-40735: ON-UPDATE trigger r

You should really raise a TAR (SR) with Oracle support about this. Definitely not a forum question.

ICal erroring out?

Similar Messages

Maybe you are looking for