Ical export limitations ?

I have an Ical calendar with about 4.000 events (back to 1940) each time I try to export this calendar after a while the beachball is spinning and the activity monitor tells me "Ical does not respond" but if i look at the monitor are still some activities going on. Are there any limitations ?
Even if i try to copy more than 40 events same thing is happen.
Any ideas
regards
olaf

im08 will only allow you to export a movie up to the size of the source video. So if your source is 640 x 480 it will allow you to export to 640 x 480, but if your source is 640 x 432 it will only allow you to export to the one below 640 x 480 (forget what that is right now).
This has always been the case and hasn't changed with 10,5. The reason you might think it has is because if you drop a photo into the project for example with a resolution of 1600 x1200 for example, then it will allow you to export up to that size, limited by the max export resolution of 960 x 540 of course.

Similar Messages

  • Ical export failing - partial or truncated

    Hello,
    I am iCal exporting calendars via FTP and webdav.
    For some time, I have noticed that the calendars is not completely exported.
    The export stop in a VEVENT. I have tried to reduce the calendar to a small subset of calendar entries, and it now contains 6 entries. As soon as I remove one the 6 remaining, the export completes.
    I have upgraded today to Lion 10.7 but the issue remains. It happens also zith 10.6.
    Is it a known issue?
    Regards.

    Google search associates that error wth insufficient storage. Check that out and see if you are over the limit.
    http://support.apple.com/kb/HT4489
    If you are - you may benefit from creating another account and importing your data within limits.

  • Export Limits for Multiple Sequences in the Same Sequence File for TS3.0

    Hi,
    I am using TestStand 3.0 to a test application. Because we want to have our limits in a csv-file I have tried to use the Import/Export tools in TS. But this application only supports to export limits for the selected sequence (e.g. main, or subseq1) at a time. This makes it a pretty hard job to export limits from 30 test sequences. What I need is a possibility to export my limits from �all sequences� in my seq-file.
    I have found an article on NI Dev. Zone about �Export Limits for Multiple Sequences in the Same Sequence File (TestStand 1.0.x)�.
    http://sine.ni.com/apps/we/niepd_web_display.DISPLAY_EPD4?p_guid=B45EACE3D9CB56A4E034080020E74861&p_node=DZ52236&p_submitted=N&p_rank=&p_answer=&p_sourc
    e=External
    I have tried to use this code but because it�s for TS 1.0.2 the limits from my multi num test step and my custom steptypes isn�t exported. So that doesn�t fulfill my needs.
    Is there an updated version with �all sequences� added to TS 3.0? Is there other good solutions to my problem out there?
    Best Regards,
    Morten Pedersen
    CIM Industrial Systems A/S
    Denmark

    Hi David Mc,
    Thanks for your reply. I have already considered this solution because the source code is added in the folder described in your reply. But that is not a good solution. It will cost me a lot of time to establish the toolchain, reverse engineer the source code, make the implementations and build a new dll (most off these is already knowledge by NI). And when NI make future releases of TestStand I have some merge work to do every time NI have made some changes in the files I have changed.
    But as I write above: I have hoped that NI already has/or could made a solution like the one to 1.0.2 (see link in root) to me. And then they could include it in the next version.
    I don't think I am the only one in the TestStand world that ne
    ed this feature.
    Best regards,
    Morten Pedersen
    CIM Industrial Systems A/S
    Denmark

  • Ical export 1 calendar

    Hi,
    Is it possible to export 1 calendar to an ics file ? Now I only see the option to export all calendars in iCal to an archive as backup file.
    or is there another option to save just all the data from 1 calendar to an ics file ?
    Jay

    Hi Jay,
    select the calendar, you want to export.
    Just above the archive option, there should be an export option in the menu, this is meant for single
    calendars as ics.
    Anakonda

  • APEX Interactive Report - CSV Export Limitations?

    Hello,
    I have an interactive report generated for some users.
    The issue I'm having right now is that the results that the users need is over 100k and the export to csv option caps out at 65,535 rows. Is this a limitation on APEX Interactive Report's side and is there anyway to get around it so we can send 100k records (or more) to the users without them splitting the report many ways?
    Thanks in advance.
    Ivan

    Ivan,
    I'm afraid that I can't answer your question. The APEX insiders will have to field that one.
    As one that dislikes voluminous reports, have tried swaying your users that you now have this great interface to drill to the data you need versus downloading gobs of data and filling up their hard drives. Ask if there is something else your application can do that they would do with all that data in Excel.
    Jeff

  • Iphoto 08 image export limitation (!?)

    Hi,
    It used to be that you could export all your images out of iPhoto if need be. Why is it now limiting me to 60 photos at a time? And, if there's no way to do it in program, what is good work-around?
    Appreciate any insight here.
    Thx!

    Never mind...had it set to Facebook utility instead of just files. Doh!

  • Jpg export limited to 2000px from 4256px RAW?  Aperture 2.1.4

    hi, i have the problem, that when i export from 4256px RAW (D700) files jpgs that should be in original dimensions (i choosed that in the setting), i always get jpg files with only 2000px. if i export PSD, everything is fine. is there a limitation or is it my mistake?
    thanks !
    boris
    ps: sorry for my english, it was a long day....

    Something is not set correctly -- it should be full pixels if you have chosen JPEG Original as the selection when Exporting. With JPEG Original chosen in the Export window, click on Edit and see what is reported.
    Btw, while I do not have D700, I have some images I shot with one in a test, and thus could test with one of those to check before I posted.
    Ernie

  • SQL Developer Export Limitation of CLOB columns

    Hello Everyone,
    Would anyone happen to know if there is a column size limitation when exporting data (excel, text, etc) from the results query results pane? There appears to be a 4000 byte limitation. Specifically, I am attempting to export sql results that contain clobs which are storing XML messages.
    Is this a known limitation and if so, is there any expectation of this being enhanced?
    I am using the following:
    Windows XP SP3
    SQL Developer 2.1.0.63 (also happens on the 1.5 branch)
    Oracle Server 10.2.0.4
    Oracle Client 10.2.0.1
    Thanks,
    Ronnie

    Yes, that's correct.
    If you want this enhanced, add a request at the SQL Developer Exchange, so other users can vote and add weight for possible future implementation.
    Regards,
    K.

  • Export limits?

    When trying to export a file out to a raster format, I'm given the options of "screen", "medium", "high" or custom resolutions. For this particular file, (50" x 50") "screen" resolution creates a 3600 x 3600 file in about 15 seconds. "Medium" creates a 7500 x 7500 file in about 90 seconds, and "High" gives me an error message: "The combination of artwork size and resolution exceeds the maximum that can be rasterized". I get that message even if I go from "medium" (150ppi) to 175ppi.
    Can anyone tell me what the maximum that can be rasterized is? It looks like Illustrator doesn't want to handle a raster image larger than about 60MB, and that seems really low.
    Activity Monitor doesn't show me anywhere near running out of memory when the exports are running.
    (Mac Pro 8-core 2.8GHz, 10GB RAM, OS X 10.5.5, Illustrator CS4)

    Check your document raster setting, it could be in conflict with a high res rasterization. Another possibility is scratch disk space and/or fragmentation could be limiting enough scratch to pull-off the operation.

  • What's the difference between iCal Export and Archive?

    I want to back up my iCal on my Mac before converting to iCloud. I see via the File drop down menu, I can either;
    File > Export > Export
    or
    File > Export > iCal Archive
    Apple docs just addresses: iCal Archive for backing up which is fine.
    But I was wondering what the Export > Export function is for. Is it a different file format than iCal Archive thus allowing you to import and Export > Export to perhaps another calendar program other than iCal?

    Austin, your response doesn't fully satisfy the question. First, while you're right that "backup" would imply that it's a backup, the word "backup" doesn't actually appear in the menu options. Some time has gone by from the original post and the original product names, but the concept of two choices still remains. They now are given as "Export…" and "Calendar Archive…" (previously it was "Export…" and "iCal Archive…").
    According to other sources, "Export…" is used to export a single file, to later import to another calendar program or perhaps another computer.
    "Calendar Archive…", on the other hand, is supposedly used to export ALL your calendars, and subsequently to import to a new Calendar on a different Mac (or, of course, to reload the current one). It seems to me that someone wanting to take their whole calendar environment off their office computer and get it onto a laptop or a home computer would want to use Calendar Archive rather than Export.

  • Ical export to numbers

    Hi,
    I'm looking for a simple way to download ical events to a another program like numbers, txt-file, etc.
    Approach:
    I have set up an own calendar for my daily time reports:
    Event = CustomerName=8 (means Customer worked 8 hrs)
    Place = datails of what I have done
    Now I would like to export this data to number for creating a time sheet.
    I don't like to buy any tool. So I'm looking for a applescript, automator, "manual work" to get this data on a monthly interval to numbers.
    (Best would be to even get statistics out on a weekly basis)
    Best regards,
    Sigi

    Nobody?
    OK than some thoughts which tool can be usefull to extract this data?
    I have tried already Bento (3) - this is not working anymore :-(

  • Exporting limits?

    I can't export video over 18:47 minute of length ! it shows that it's completed 100% but I only get the half of my video exported ! is there any option that is used for limitting exports?? Please help!!

    More information needed for someone to help... please click below and provide the requested information
    -PPro Information FAQ http://forums.adobe.com/message/4200840

  • OMF and AAF exports -limited functionality now with 'raw' DSLR audio files.

    I'm an post production sound mixer...and a film maker and thus I see PP CS5 from 2 sides. I'm using CS5 with a PC.
    The industry uses OMF or AAF to export from a video workstation to an audio one. However PP CS5's OMF and AAF are both flawed.
    I often had trouble exporting OMF's (from CS4) which failed without any reason popping up from the software. I usually believed this to be because of the OMF's restriction to 2Gb so I exported single tracks when I believe the source files are large...even when specifing say only 50 frame handles.
    AAF more often worked with large files but the exports become large of course (that's OK) and all video material had to be deleted in the sequence before doing an AAF export.
    I am now using CS5 and dropping my Canon 5D2 'H264' and Panasonic GH-1 'mts' files directly on the timeline instead of converting them to avi's with Neoscene. Great ...but alas all OMF's or AAF exports now fail....they will only work if I get my audio back to being wav files again, which isn't really viable once editing has occurred.
    I know that OMF is fraught...Avid never made it easy but AAF is a more up to date exchange protocol. Could I request that this is investigated and an intermediate  transcode to something like wav or AIFF be undertaken by Media Encoder when an AAF export is used? I assume that the encoder doesn't yet know how to process audio .movs or mts files into the required export audio file and just kills the process.
    David Taylor  Postfade Sound  Pinewood Studios UK

    Stan,
    Thanks for the suggestion...I submitted a Bug Report.
    I used both OMF and AAF to export from PP CS4 to my professional Fairlght DAW, which was happy with either, as long as the export was succesful. As I said there were occasional problems with OMF even though I selected small 'audio handles' for the 'embedded' OMF exports. My source audiofiles are often pretty big. AAF worked with these big source files however.
    However I always used Neoscene to transcode my DSLR files before importing the Neoscene converted .AVI's into CS4, the audio was part of the new .AVI's and was probably now a .WAV.
    Now with CS5 I can drop the Canon 5D2's 'H264. mov's' or the Panasonic GH-1's '.mts' video files directly into PP-which plays them beautifully.
    My trouble now starts when I try and export the edited audio to my DAW. I can only get it to work with source files that are .WAV.
    I don't think other professional users, like all those new PP CS5 machines at the BBC, will be happy with the compromised OMF/AAF exports either as so many of us are using DSLR's now.
    David

  • ICal is not a product that lives to Apple's standard

    Hello,
    I am an Apple fan and have been so since 1984. I define my self as a difficult user to satisfy an happily most of Apple's products satisfies me very much. iCal's is a rare exception that I find limited and short of featuresand. I find that this product does not live to Apple's usual standards. Since PalmDesktop is a good product that has existed for many years, I don't understand that iCal does not integrate more of it's features.
    I have been using PalmDesktop for 5 years and feel this product is great. For sure there is probably some more customising that Apple could do to fit it's need, but I feel 95% of this product is great, simple and customisable.
    iCal is short of great features and does not integrate the features we need when we have to organize our daily life. iCal is missing (short list of thiese missings, and I could add more if I thought that it could change something):
    • a real task management module like PD's one
    • a fast memo module that would be syncronized automatically with my PDA
    • a upgrade path from the most used PDA, the PALM device (task from PD software cannot be exported to iCal's limited task module, there is no memo module)
    • an adress book display that you can customize by department ...
    ... and the list could continue.
    To my point of view iCal is limited and is not a great product ... But as I love what Apple does, and the look and feel of there product, I have tired hard to find a workaround to all my problems, without success. A simple post concerning the possibility to export my task from PD was never answered, and no ressources where found on the net to help.
    Am I the only Apple fan to feel this way about iCal ??? Most of Apple's work is simply genious, but iCal's not.
    Robert Lespérance

    Hi Robert,
    I think most of us agree that iCal is not as good as it should be, and like you, I used and loved PD even before it was PD; I actually paid for it when it was Claris Organizer and I'd pay again if it was updated (you do know that it was owned by Apple at one time, right?).
    I am waiting for Chronos SOHO Organizer, the successor to Chronos Personal/Group Organizer, a product close to PD in functionality. And it will have group features. Alternatively, I expect iCal 3 to be a big improvement, but I'm not waiting if SOHO proves worthwhile (they say they'll integrate iCal, Address Book, etc.). I still use PD as nothing can replace it yet.
    re Tasks from PD to iCal: I suspect folks didn't have an answer, but a reply saying that is helpful so at least you know someone is listening. I don't have an answer either as you can see iCal only imports vcal, vcard, and Entourage data, and PD doesn't export To Do's in those formats. A workaround would be to sync PD with a Palm, then sync the Palm with iCal. I don't know how well this works typically but I'm sure some folks here could tell you, or you could ask at the iSync discussion.

  • ICal not syncing to iphone

    I'm creating notes in my iCal on my iMac. The changes show fine on
    my calendar in my .mac account. But the changes won't show ont the
    calendar on my iphone, even though I've selected to show the
    .mac calendars. Help!

    Here are a few steps to try.
    1. Turn off .Mac Sync in System Preferences.
    2. Just to be safe, open iCal and back up your calendar. File -> Back up iCal.
    3. In iCal, export all your calendars as file(s). File -> Export.
    4. Delete all your calendars from iCal even subscribed calendars. You will have to create a temp calendar, because ical will not let you delete all calendars
    5. Now that all your calendars are gone, quit ical and reopen. This is just to make sure all calendars, except he temp calendar, are gone.
    6. Now open applications -> isync and reset sync history found in the isync preferences.
    7. After sync history is reset you can quit isync.
    8. Import the calendars you just exported.
    9. Open iTunes sync with iPhone, telling iTunes to replace all ical data on my iPhone . This is found in the advanced section ant the bottom of the info tab page.
    Hope this helps.

Maybe you are looking for