ICal fails to Sync with my Palm Treo yet my iPod does!

iCal is a nightmare for me! Throughout much of 2007 it continually failed to refresh and update itself when I sync'd with my Lifedrive via Missing Sync. During Dec 07 I decided to perform a clean install of Leopard on a Cleaned Hardrive in my Powerbook. I also purchased a Treo 680 phone. When MarkSpace issued a Leopard version of Missing Sync I performed a sync with my data from .Mac via ical/AB. The first sync worked great.
Since then, only 1 in my be 24 syncs have successfully transferred from iCal to my Treo ot Vice Versa. 99% of data entries are made on my Treo but they don't show up in iCal.
AB is mostly fine. Although the odd Contact address seems to disappear and Missing Sync occasionally throws a wobbly by unregistering it's Conduit.
Today I remembered that my iPod can link to iCal/AB so I thought I would test whether the data from my Treo was getting through to Sync Services. YES IT DOES!
So my iPod is completely uptodate with my Treo yet iCal refuses to do anything.
Has anybody got any ideas as to what I need to do to sort iCal out!
Many Thanks

Hi there,
I do have almost the same problem with Leopard/iCal/Treo/Missing Sync.
The guys from Missing sync announces some special issues when using this setup.
And they say: it's related to Apple, cause they changed something in the iCal structure. And therefore syncing my Treo with Missing Sync and iCal doesnt work at all. I do understand that Apple likes to push us poor Palm users to buy the new iPhone... but I wont, cause it is too expensive yet and... last not least, I'm quite happy with my Treo for the last couple of years.
Thin it is a shame that Apple prevents the further use of Palm devices in that rediculous way. Not very funny.
So, back to your question: basically there is no solution yet. Missing Sync blames Apple for it, Apple doesn't say anything about that issue.
Let's get back to ancient times and edit your calendars double. Either iCal and nanually on your Palm device. Great! Welcome to the 21st century.
Regards
Stephan

Similar Messages

  • Mac iCal will not sync with Yahoo Mail

    Mac iCal will not sync with Yahoo Mail.
    The URL https://caldav.calendar.yahoo.com/principals/users/[email protected]///caldav.calendar.yahoo.com/principals/users/[email protected]/ encountered HTTP error 404. Make sure the URL is correct.

    "Unable to login to the .Mac synchronization server
    .Mac login failed"
    This message appears on each of two computers when attempting to reset my data on .Mac.
    Is there any solution?

  • My ical won't sync with iPhone 4 after IOS 6.0.1 update

    My ical won't sync with iPhone 4 after IOS 6.0.1 update. The "sync calendars" option is no longer available after I installed this update. Any ideas???I have tried a few times to sync, and nothing has changed on my calendars. I have had so many troubles with this update. Grrr...

    I tried the same but it did not worked. But, i got a solution. I accessed gmail on my laptop. Went to gmail settings. There is a option to add a device. A iPhone was already listed. I clicked Revoke to remove it. Then i clicked add new device and gave it iPhone name and a new 16-20 character password was geenrated. I used it to configure gmail on my Iphone and it worked beautifully. So glad i have been able to fix this. That password is a one time password to authenticate that device.

  • Can't sync with my Palm calender/contacts

    Just bought the iphone 3G and have got it pretty much up and running with music, emial, etc. Problem is when I log in to itunes I can't figure out how to sync with my old palm info. It only provides Yahoo contacts, Google, Outlook, and Windows as contact sources. No other options? I was told at the store I could sync with my palm data.
    Any suggestions?

    I have a palm tungsten on my win xp on my laptop. I use outlook express and IE. I would like to move the palm contacts folder which includes phone numbers on to the iphone. What settings do I choose for the synching with itunes? How do I export the palm folder? Thanks much for help, irenes

  • Migrating EPMA Planning application: Failed to sync with user provisioning

    Hi All,
    We are migrating applications from Production to Dev. We have one EPMA Planning and one Essbase application in both environments.
    We have migrated artifacts into File system in PROD(Shared services, EPMA, Planning, Essbase and Reporting). We have copied and pasted in import_export folder in DEV.
    Then we are trying to migrate artifacts into applications from File system in DEV. First we did EPMA artifacts successfully in migration status report then we have deployed application into planning without any errors.(msg showing as in sync deployment). After that we did shared services, it is failed
    migration status report error msg:
    +28:6571:Application <xxxxx> does not exist in target. 28:6571:Application <xxxx> does not exist in target. 28:6571:Application <xxxx> does not exist in target. 28:6571:Application <xxxxx> does not exist in target. 28:6571:Application <xxxx> does not exist in target. ...+
    When i am trying to open the planning application, i am getting error: Failed to sync with user provisioning, check planning log for details
    HyS9planningsyserr.log details:
    [INFO] RegistryLogger - REGISTRY LOG INITIALIZED
    [INFO] RegistryLogger - REGISTRY LOG INITIALIZED
    Creating rebind thread to RMI
    com.hyperion.planning.DuplicateUserException: Another user with the name hypadmin already exists.
    com.hyperion.planning.DuplicateUserException: Another user with the name hypadmin already exists.
    com.hyperion.planning.HspRuntimeException: Failed to sync with user provisioning. Check Planning log for details
         at com.hyperion.planning.HspJSImpl.synchronizeUserWithProvisioning(Unknown Source)
         at com.hyperion.planning.HspJSImpl.login(Unknown Source)
         at com.hyperion.planning.HspJSImpl.login(Unknown Source)
         at com.hyperion.planning.HyperionPlanningBean.Login(Unknown Source)
         at HspLogOn.Handle(Unknown Source)
         at HspLogOn.doGet(Unknown Source)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:743)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3241)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
         at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2010)
         at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:1916)
         at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1366)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
    java.lang.RuntimeException: Errors occured during syncrhonization: [com.hyperion.planning.DuplicateUserException: Another user with the name hypadmin already exists.]
         at com.hyperion.planning.HspJSImpl.synchronizeUserWithProvisioning(Unknown Source)
         at com.hyperion.planning.HspJSImpl.login(Unknown Source)
         at com.hyperion.planning.HspJSImpl.login(Unknown Source)
         at com.hyperion.planning.HyperionPlanningBean.Login(Unknown Source)
         at HspLogOn.Handle(Unknown Source)
         at HspLogOn.doGet(Unknown Source)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:743)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3241)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
         at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2010)
         at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:1916)
         at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1366)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
    java.lang.RuntimeException: Errors occured during syncrhonization: [com.hyperion.planning.DuplicateUserException: Another user with the name hypadmin already exists.]
         at com.hyperion.planning.HspJSImpl.synchronizeUserWithProvisioning(Unknown Source)
         at com.hyperion.planning.HspJSImpl.login(Unknown Source)
         at com.hyperion.planning.HspJSImpl.login(Unknown Source)
         at com.hyperion.planning.HyperionPlanningBean.Login(Unknown Source)
         at HspLogOn.Handle(Unknown Source)
         at HspLogOn.doGet(Unknown Source)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:743)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3241)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
         at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2010)
         at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:1916)
         at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1366)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
    com.hyperion.planning.DuplicateUserException: Another user with the name hypadmin already exists.
    com.hyperion.planning.HspRuntimeException: Failed to sync with user provisioning. Check Planning log for details
         at com.hyperion.planning.HspJSImpl.synchronizeUserWithProvisioning(Unknown Source)
         at com.hyperion.planning.HspJSImpl.login(Unknown Source)
         at com.hyperion.planning.HspJSImpl.login(Unknown Source)
         at com.hyperion.planning.HyperionPlanningBean.Login(Unknown Source)
         at HspLogOn.Handle(Unknown Source)
         at HspLogOn.doGet(Unknown Source)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:743)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3241)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
         at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2010)
         at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:1916)
         at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1366)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
    java.lang.RuntimeException: Errors occured during syncrhonization: [com.hyperion.planning.DuplicateUserException: Another user with the name hypadmin already exists.]
    Thanks,
    mady

    Hi,
    I got solution for this issue through Oracle Support.
    I have restored database and migrated artifacts using LCM. any one method is enough to do Planning application migration (from Oracle Support)
    Thanks,
    mady

  • Hyperion Planning - Failed to sync with user provisioning. Check planning

    Hi All,
    I'm trying to configure Hyperion Planning to user an external user repository (OID) but when i try to login with an OID user i get the following error :
    "Failed to sync with user provisioning. Check planning log for details"
    I'm not hyperion expert so please excuse any school boy mistakes.
    Use Case : login to Hyperion Planning using an OID user
    Setup:
    1)     User created in OID
    2)     Use Provisioned in HSS with planning roles
    3)     User can login to HSS
    4)     Able to login with Native user with the exact same roles
    5)     Version 11.1.2
    6) Can only see native user in EAS..
    I've googled away and tried various things:
    1) Run provisionUsers script :
    Loaded Version of Essbase RTC: 0xb1200
    [Wed Jan 25 09:39:04 GMT-06:00 2012] Planning successfully notified HBR repository.
    Wed Jan 25 09:39:41 GMT-06:00 2012 :: [Wed Jan 25 09:39:41 GMT-06:00 2012] Plann
    ing: Synchronizing the following users with user provisioning: [XXX]
    Wed Jan 25 09:39:41 GMT-06:00 2012 :: Planning: Error occurred while synchronizing: Errors occured during syncrhonization: [com.hyperion.css.CSSIllegalArgumentE
    xception: EPMCSS-251046: Invalid principal.]
    2) Bouncing servers
    Any help would be great.
    Thanks,
    Oz

    Hi,
    Have you updated the datasources for each of the planning applications, you will need to update the password and probably recycle planning app server.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Planning 931 -   Failed to sync with user provisioning

    I am getting " Failed to sync with user provisioning. Check Planning log for details" error message while trying to login
    This issue is not for all users. I can login as admin and refresh my security via planning web

    Hi Amit,
    i had similar issue when i migrated planning application from test to Dev.
    here is the solution which I followed and resolved the issue:
    1.Login as admin account
    2.click on Administration tab.
    3. select Dimensions from menu.
    4. select any of the member.
    5. Click on Assign Access.
    6. Which takes you new window.
    7. Click on "migrate identities", once it is successful.
    8. logoff and try to login with any other user.
    hope this helps.
    www.dornakal.blogspot.com
    Edited by: Dornakal on May 6, 2009 10:52 AM

  • Failed to sync with user provisioning

    Hi,
    None of the users other than admin are able to login to planning application in SIT. I have the admin access in SIT, but still not able to log into any planning application. The error i get is "Failed to sync with user provisioning. Check Planning log for details".
    What could be the reasons? Which log do i check?
    version - 11.1.1.3
    Regards,
    Ragav.

    Have you tried running the updateusers utility :- http://download.oracle.com/docs/cd/E12825_01/epm.111/hp_admin/ch03s12.html
    this should try and sync HSS with the planning tables, it will also output any failures.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Failed to sync with user provisioning. Check Planning log for details

    hey everyone,
    we just did a password update for our hyperion planning application owner account. and now when i try to login to hyperion planning, i get the following error message:
    Failed to sync with user provisioning. Check Planning log for details.
    I can still login to shared services and workspace with the same application owner account.
    i also tested and verified that I can login to Essbase via Excel using this application owner acct. after i changed the password, i have stop and restarted the weblogic web services after I updated the password.
    because i kept getting the error, i have reverted back the password to the original one... but i am still getting the same error message.
    btw, we are using a solaris server running WebLogic9, Hyperion System 9. any help or tips would be appreciated.. thx.

    Hi,
    Have you updated the datasources for each of the planning applications, you will need to update the password and probably recycle planning app server.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • My ical is not syncing with my iPhone 4s.

    My ical is not syncing with my iPhone 4s. I had mobileme and upgraded to iCloud. I also have Mac Lion and feel like I have all the upgrades required, but any time I enter a new event in my iCal, it never transfers to my iPhone. Note: when I enter an event in my phone, it DOES transfer properly to my iCal on my Mac.

    Welcome to the Apple Community.
    First check that all your settings are correct, that calendar syncing is checked on all devices (system preferences > iCloud on a mac and settings > iCloud on a iPhone, iPad or iPod).
    Make sure the calendars you are using are in your 'iCloud' account and not an 'On My Mac', 'On My Phone' or other non iCloud account (you can do this by clicking/tapping the calendar button in the top left corner of the application ), non iCloud calendars will not sync.
    If you are sure that everything is set up correctly and your calendars are in the iCloud account, you might try unchecking calendar syncing in the iCloud settings, restarting your device and then re-enabling calendar syncing settings.

  • Ical won't sync with iPhone 5, iPad 2 or macbook pro.

    I have updated my devices and now my ical won't sync with iPad 2, macbook pro or iPhone 5.  How can I refresh them so they will all sync together.  I just noticed that when I added an event on my ipad2 it did not show up on my macbook pro.  I turned iCloud off then on again.  I also turned calendars on and off again.  Then the event disappeared from my iPad also.  So now it is only on my iPhone 5.  How do I sync ical with all my devices?

    Anna,
    I have tried everything suggested by the apple support webpage.
    It would be helpful to know if you used this support article: iCloud: Troubleshooting iCloud Calendar.

  • ICal won't sync with iPad, iCal won't sync with iPad

    My iCal won't sync with my iPad. Anyone know why? The iPad takes on the iCal but the iCal won't take the iPad entries.

    Hello Squeegeefrog, 
    Thank you for participating in the Apple Support Communities. 
    You mention that iCal (or Calendar on OS X Yosemite) won't sync with your iPad. 
    Are you using iCloud Calendar? If so, the advice and  troubleshooting steps in these articles can help you sync the calendar on your Mac with your iPad using iCloud:
    iCloud: Using iCloud Calendars with Calendar and iCal - Apple Support
    Get help using iCloud Calendar - Apple Support
    All the best,
    Jeremy 

  • ICal will not sync with iCloud

    iCal will not sync with iCloud, i'm running OS X 10.6.8. What am I doing wrong?

    Mike,
    You need to upgrade your operating system: iCloud: System requirements.

  • Failed to sync with user provisioning 9.3.3

    Hello,
    I have a new twist on a common error. We have two Planning applications. We copied one from prod to dev, but during the duration of this, I had to change my password. Now I can sign onto one planning application, but not the one we refreshed, due to the "Failed to sync with user provisioning" error. I can sign onto EAS Console and Shared Services.
    Can you please tell me what I have to do to resync this Planning application, and instructions on how to do this? I have access to the admin account and database tables if required. This is version 9.3.3.
    Thank you,

    Hello John,
    I am logging in with my user id, which is an administrator, but not the "admin" account. I am unfamiliar with the term application owner, but I expect it is the "admin" account. We use single server sign on, so my network username and password are the Hyperion/Essbase username and password.
    I think the problem is, between the time we copied the application from production and copied it to development, I changed my password.
    I looked in the hsp_users table, and it does not have usernames. Is there a way to associate the user_id with a username to find out which one is mine?
    I would copy the SID value from the working to the non-working one. I understand that part.
    Thank you,

  • I got a new pc and I am getting this message: The ipod 'harms ipod' is synced with another itunes library  Do you want to erace this Ipod and synce with this itunes library?  An Ipod can only be synced with only one itunes library at a time.  Erasing and

    The ipod 'harms ipod' is synced with another itunes library.Do you want to erase this ipod and sync with this itunes library?  An ipod can be synced with only one itunes library at a time.  Erasing and syncing replace the contents of this ipod with the contents of this itunes library.
    I don't know what to do?  I should save my library before I replace the contents, but I don't know how to do that! HELP!!

    See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
    https://discussions.apple.com/thread/2452022?start=0&tstart=0
    B-rock

Maybe you are looking for