ICal home calendar won't sync after iOS 5 -- Snow Leopard

Since I upgraded my iPhone 3GS to iOS 5, my desktop computer's iCal home calendar is no longer syncing events from the iPhone. I'm running Snow Leopard, so I know the desktop computer can't sync through the cloud. But shouldn't it still be getting new events from the iPhone itself when the iPhone syncs with the desktop, same as it used to before iCloud?

Try something very simple first. Quit iTunes, reboot the Mac and restart the iPad. Then try again.
I had some issues when I first installed SL on my last MacBook, and I still have issues every now and then with the iPad not being recognized (now running Lion 10.7.3 on a new MacBook Pro) and this has always worked for me. You may have to reboot the Mac a couple of times - but try it and see if it works for you.

Similar Messages

  • Ipad won't sync after updating to snow leopard

    Any help available regarding a non-syncing ipad first gen, after updating to snow leopard on my imac?  The ios software on ipad is up to date, and the snow leopard version is also up to date.  The computer will not even recognize that the ipad is connected.  Thx.

    Try something very simple first. Quit iTunes, reboot the Mac and restart the iPad. Then try again.
    I had some issues when I first installed SL on my last MacBook, and I still have issues every now and then with the iPad not being recognized (now running Lion 10.7.3 on a new MacBook Pro) and this has always worked for me. You may have to reboot the Mac a couple of times - but try it and see if it works for you.

  • HELP!!!! Aperture 1 won't open after I installed Snow Leopard.

    Aperture 1.5 won't open after I installed snow leopard. Why is it not working?

    Because it's incompatible. You need to upgrade to version 2.1.4 or newer.
    (56089)

  • Ipod Touch 5th gen won't sync after iOS update

    iPod Touch will not sync after iOS 7 update. It's stucked at "changes are being applied" and won't go past that point. Tried 5 times and got the same problem. I have the latest iTunes installed.
    Any suggestions?

    Try a cold reboot of your phone / iPod. I.e. hold power + home button until it reboots.
    Worked for me.

  • Home sharing does not work after update to snow leopard 10.6.4 and iTunes 9

    I am using home sharing since about a year without any problems. After updating to snow leopard 10.6.4 and iTunes 9.2 it suddenly does not work anymore.
    On my iMac and my Mac Book Pro I get error code 3259 and it tells me to check my firewall and to enable Port 3689.
    I did not change anything in the firewall settings, itunes on both allows data traffic in both directions. I also do not find any option to activate a port ( also wondering why this is suddenly now necessary)
    I deactivated home sharing on both machines and enabled it again. It still does not work.
    On both machines iTunes displays the the library on the left side but like said it is not accessable
    With Finder I can access the other computer from both machines without any problem.
    Any help to solve this would be very much appreciated

    first of all, if you are behind a router firewall, and have your network secured (WPA2 and a long, non-dictionary password made up of letters and numbers), you don't need the software firewall on your Mac(s).
    @ least turned if off for troubleshooting purposes.
    turn home sharing off on both computers, and make sure
    (a) both Macs have access to the internet
    (b) iTunes on both machines is authorized for the same iTunes account.
    turn home sharing back on on both Macs.
    does it work ?
    JGG

  • Outlook calendar no longer syncs after IOS 7 / iTunes update

    Running Outlook 2003 on Win XP.  Yes that's what IT allows....
    Updated IOS7 (now at 7.0.3), tried to sync on the next day at work.  Itunes forced me to update (11.1.2.31).
    Updated iTunes.
    Notes sync.
    Calendar does not.
    iTunes says:
    Sync Calendars
    Your calendars are being synced with your iPhone over the air
    Over-the-air sync settings cane be changed on your iPhone
    I've disabled OTA calendar sync I know of (Google, iCloud) with no effect.  There are still some iCal feeds that I left on.
    Suggestions appreciated, but I'm stuck with my work environment for now.  Really would like to get back where I was before "updating". :-)

    Still struggling with this.  I did discover a diagnostic in iTunes, but it says all is well.  I suspect that is because it thinks the iPhone is syncing the Outlook calendar over the air:
      Microsoft Windows XP Professional Service Pack 3 (Build 2600)
    INTEL_ DX38BT__
    iTunes 11.1.3.8
    QuickTime 7.7.4
    FairPlay 2.5.16
    Apple Application Support 2.3.6
    iPod Updater Library 11.1f5
    CD Driver 2.2.3.0
    CD Driver DLL 2.1.3.1
    Apple Mobile Device 7.0.0.117
    Apple Mobile Device Driver 1.64.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.6.502
    Gracenote MusicID 1.9.6.115
    Gracenote Submit 1.9.6.143
    Gracenote DSP 1.9.6.45
    iTunes Serial Number 0013BB300E265908
    Current user is an administrator.
    The current local date and time is 2013-11-08 18:09:43.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is not supported.
    Core Media is supported.
    Video Display Information
    NVIDIA Quadro FX 1500
    **** External Plug-ins Information ****
    No external plug-ins installed.
    **** Device Connectivity Tests ****
    iPodService 11.1.3.8 is currently running.
    iTunesHelper 11.1.3.8 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    Universal Serial Bus Controllers:
    Intel(R) ICH9 Family USB Universal Host Controller - 2934. Device is working properly.
    Intel(R) ICH9 Family USB Universal Host Controller - 2935. Device is working properly.
    Intel(R) ICH9 Family USB Universal Host Controller - 2936. Device is working properly.
    Intel(R) ICH9 Family USB Universal Host Controller - 2937. Device is working properly.
    Intel(R) ICH9 Family USB Universal Host Controller - 2938. Device is working properly.
    Intel(R) ICH9 Family USB Universal Host Controller - 2939. Device is working properly.
    Intel(R) ICH9 Family USB2 Enhanced Host Controller - 293A. Device is working properly.
    Intel(R) ICH9 Family USB2 Enhanced Host Controller - 293C. Device is working properly.
    FireWire (IEEE 1394) Host Controllers:
    Texas Instruments OHCI Compliant IEEE 1394 Host Controller. Device is working properly.
    Connected Device Information:
    ----- iPhone, iPhone 5 (CDMA) running firmware version 7.0.3
    Serial Number: -------------- 
    **** Device Sync Tests ****
    Sync tests completed successfully.

  • Apache won't work after upgrade to Snow Leopard

    Today I have upgraded to Snow Leopard. Previously I have used 10.5.6 (Leopard). In Safari I get the following message: "Safari can’t open the page “http://localhost/” because the server unexpectedly dropped the connection. This sometimes occurs when the server is busy. Wait for a few minutes, and then try again." Does anybody know how to fix this issue? Thank you.

    HI,
    Do you have web sharing turned on?
    System Preferences/Sharing.
    Try posting in the Mac OS X Technology Forum also.
    http://discussions.apple.com/forum.jspa?forumID=735&start=0
    Also, did you repair permissions after the upgrade? If not..
    Control or right click the MacintoshHD icon on your Desktop. Click "Get Info". Under the General tab you will see Capacity and Available. Make sure there is at least 10% available disk space, 15% is better.
    Carolyn

  • Ipod Touch(4G) won't sync after iOS 5 update

    After I updated to iOS 5 my ipod could no longer sync with my iTunes. When plugged in it will appear on the left of iTunes but the sync button is grayed out and unpressible. I have tried restoring a backup on the ipod, resetting to factory settings, reinstalling iTunes, rebooting computer/ipod, and creating a new library. I have never had a problem like this before. Any help would be appreciated.
    Thanks.

    I have the same problem and read where one person turned off ICloud.  I do not have I Cloud activated so I went ahead and turned off WiFi.  Now it is syncing.
    It used to not get past Step 1 of Syncing and it would say "Fail to Sync" or something like that.

  • Ipad won't sync after iOS 7.03 update: Other is huge and over capacity

    When iOS7 was updated last week (7.0.3) the update went fine on my iphone 5s but was interupted on my iPad. 
    Now, when I connect the iPad via cable to my desktop Mac, it will not sync.  It connects to the iPad just fine, but the "changes" cannot be applied because it shows that the amount of data to be transfered to the 64GB iPad is "Over Capactiy by 31.37GB."  A total of 45.2GB of "Other" is indicated on the summary page in iTunes in a yellow band. 
    (A sync from the same ID, same iTunes library with the same settings, with the iPhone 5S of the same capacity (64GB) has NO trouble completing properly.  It shows only 1.62 GB of "Other."
    I have tried restoring the iPad from a previous back up. No good.
    I have tried restoring the iPad to a new, factory issued condition, set it up as if it were a new iPad and tried to sync.  No good.
    I have changed the sync setting so that NO video or audio tracks are to be synced (freeing enough space for all of the bloated, "Other" category.)  Stiill ends up stuck perpetually in Syncing iPad - Step 4 of 4 - "Waiting for changes to be applied"
    Any suggestions?
    SERIOUSLY frustrated. 

    I am having the exact same issue except with the iPhone 4s.
    "Other" shows 34.88GB
    I tried everything you did, short of factory reset, since I read elsewhere that won't work.
    iOS 7.0.3
    iPhone 4s 64GB
    Help!

  • Calendar won't sync on iOS 8.2

    Since upgrading my iphone 4s to iOS  8.2 I can no longer sync my Outlook calendar on my laptop to my phone.
    This is an essential feature for me and I don't want to use iCloud and have to copy work appointments into that.
    I have tried deleting the calendar, forcing a re-sync, changing the length of time to sync (30 days, all days etc)
    I have seen that 8.2 was supposed to fix problems with calendars in 8.1 but this definitely not the case for me.
    My question is whether this is a known bug and whether this is being investigated ?

    I had a frustrating day, did a chat whit apple, they did not know, visited my it company, they did not know, but the problem was finally in 4 years and more different mobile phone's in exchange, read this link! everything is working fine! My problem was the maximum user setup in exchange!
    http://thoughtsofanidlemind.com/2014/01/15/eas-device-partnerships/

  • Canon HF20 won't mount after upgrade to Snow Leopard

    Since upgrading to Snow Leopard, my Canon HF20 will no longer connect via USB. This is a basically a USB hard drive as far as the OS is concerned, and I've typically mounted the camera and copied my AVCHD files to an external drive for editing. No special drivers or software was required for this on Leopard. Has anyone else seen this, had it work, etc...?
    Thanks!

    Hello,
    Is your camera still working, and did you do anything special to get it to work? My HF200 doesn't connect properly since I upgraded.

  • Encrypted .dmg won't mount after upgrade to Snow Leopard

    Just upgraded to Snow Leopard and having trouble mounting an encrypted disk image that I use for my confidential files. I have tried mounting using both DiskImageMounter.app and the Disk Utility but both give error 60008, unable to attach.
    Anyone else having similar problems or have suggestions for alternative ways of mounting?
    Best,
    Jon.

    My encrypted disk image with confidential files was created under Leopard using Disk Utility. I just upgraded to Snow Leopard and when I try to mount the image, the password box comes up (as before the upgrade). But, I enter my password, and the disk image does not mount, it just keeps asking for the password again. I also have the latest MacBook Air and I also have an encrypted disk image there too with the same problem when I try to mount it. In addition, I have a LaCie 1TB External Harddrive that contains an encrypted disk image. When I try to mount this disk image, which normally appears on the desk top, I get the same repeating password box. Entering the password does nothing--other than causing the password box to reappear. All three encrypted disk images worked fine without any issues before the upgrade. So, based on the number of views that this post has had, this appears to be an issue that needs a resolution. Any suggestions or others with similar problems?

  • Apple Trailers won't play after update to Snow Leopard

    I recently upgraded from Tiger to Snow Leopard and the only glitch I have encountered is that Apple Trailers will not play. The computer screen darkens and the movie viewer screen pops up, but the viewer screen remains black and no movie appears. I have tried reinstalling Snow Leopard and updating to 10.6.1, but still no trailers. Any idea what's going on and what I should do? Many thanks.

    Mine seems fine, but you might post a link to a specific trailer.
    It's possible it may be Flash related, some early disks broke Flash.
    What version of QuickTime do you have? Which browser are you using?
    Check your version here: http://kb2.adobe.com/cps/155/tn_15507.html
    Joe

  • Bento won't open after upgrading to Snow Leopard?

    Bento will not open since installing / upgrading to Snow Leopard 10.6 -- just simply tries to start up and quits immediately. Any suggestions other than trashing the existing application and restoring / reinstalling from my original software discs that came with my new Mac Book Pro laptop? It was working just fine prior to upgrading to Snow Leopard yesterday.

    Download the updated version of Bento to use the application with Snow Leopard. This should fix the problem!

  • Drivers for XP won´t install after upgrading to Snow Leopard

    Hi guys, I have a MacPro with Snow Leopard and I installed XP 64 bit under bootcamp, but when i put in the Mac os SL disk to install drivers in nothing happen. Usually with the older imac that was possible but not now. Any idea?
    Thanks a lot?

    Hi mayaman,
    Apple supports Vista 64bit on the following Macs:
    MacBook Pro (13-inch, Mid 2009)
    MacBook Pro (15-inch, Early 2008) and later
    MacBook Pro (17-inch, Early 2008) and later
    Mac Pro (Early 2008) and later
    http://support.apple.com/kb/HT1846
    And drivers for Vista 64bit are on the OSX DVD (Leopard and Snow Leopard).
    Regards
    Stefan

Maybe you are looking for

  • Windows Folder icon instead of Officejet 6500a Plus E710n icon in Devices and Printers

    Can anyone help me to get the OfficeJet 6500a Plus e710n printer icon to display properly in Devices and Printers? I recently reinstalled Windows 8.1.  However, when I installed my printer, instead of the printer icon appearing in Devices and Printer

  • Cost variance for the material master

    Hi all, This is very urgent requirement. How to maintain cost variance for the material master? I will assign the points venu

  • CHAR conversion to NUM.

    dear all, in BI7, how can i convert my CHAR into NUM datatype? data from external source is coming in as CHAR and i want to change it to type NUM. how can i do that in the update rule? thanks.

  • Warning in Task Flow

    Hi., I am jdev 11.5 => I ha created a Taskflow with two jff files such that My Task Flow: view dept -----------[edit]----------------->Editdept view dept<----------[Save]-----------------EditDept While i run my jspx page and tried to perform an actio

  • Locking/protecting environment values ?

    The manual recommends that you never assign two audio objects to the same channel. Wow... I did that by accident today, and it's horribly confusing. I created two channel strips assigned to the same output track, and it's a mess--you get two channel