Ical inspector screen is black AND I can't import my ical info to Entourage
I currently have two problems with ical:
1. my inspector window is black. Except the headings such as "date" and "time" I can't see any of my imputed data unless I highlight it. I can still use ical perfectly fine. This problem is just annoying.
2. I want to try using Entourage (ical is really getting on my nerves and it doesn't have all the little things that would make my life easier). I tried importing the data but it didn't work.
Could anyone help me with these two problems.
Even though this isn't related to my problem, I am also wondering if anyone can recommend me a cheap but efficient and easy calender that I can use in place of ical in case it doesn't get fixed? Also, can anyone recommend me a project planning software, like Omnifocus, but cheaper?
Hi d,
The white status indicator light being on means you haven't shut down the MBP. Hold down the power button for 5-10 seconds until all activity stops. Wait 30 seconds or so and try booting.
If still no luck, try an SMCReset: http://support.apple.com/kb/HT3964
Similar Messages
-
my iphone 5's screen blacks out every now and then. the phone is turned on but the screen is black and i can receive calls. what is wrong with my phone?
I have to believe this has something to do with iOS 7 issues. I have taken my screen blacked out 5s twice to the Genius Bar and the found a bunch of system apps had crashed. So if this is the case, is iOS7 the problem?
-
I have Iphone 5 and updated to IOS 8... I can not receive a call, the Screen become black and I can not answer the phone call
Hey there jjroca,
It sounds like you are unable to make or recieve phone calls because the screen goes black. I would start by quitting all the running apps on the device:
iOS: Force an app to close
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it.
When you have done that restart the device and test the issue again:
iOS: Turning off and on (restarting) and resetting
If that does not resolve the issue, I would use the troubleshooting in the following article, named:
iPhone: Troubleshooting issues making or receiving calls
Thank you for using Apple Support Communities.
Take care,
Sterling -
My screen is black and i can hear the sounds on my iphone 4s - what should i do.
my screen is black and i can hear the sounds on my iphone 4s - what should i do. i have tried to restart and i still doesnt work
I had the same issue with my 2008 iMac and Apple support walked me through the fix yesterday...
1. Shut the computer down by holding the power button for 10 seconds
2. Restart the computer and press shift at the same time until you see the progress bar start moving
3. Once you reach the point where your screen goes dark and you see the cursor, type the first letter of the username for your computer, then hit Enter, then type your password, then hit Enter.
4. After a moment, you should see the spinning beach ball
5. Your screen should then move on to something along the lines of "Completing OSX Installation" (I can't remember the exact wording). Let it finish. After that it should go to your normal desktop and the issue should be fixed. (If your screen goes pitch black during this process, hit the space bar. I thought it wasn't working, but the screen was just sleeping).
Apparently it's an issue with an automatic update that never quite got past the login screen.
Hope this helps! -
I have an ipod A1285, I have 2,858 songs on it. The screen went black and i can barely see it now. Can apple fix this for me? Or can i get my songs off this ipod and put on a new one?
Hey BlueEyedDude,
Thanks for the question. I’m sorry to hear about your iPod nano! If you believe you have isolated the issue completely to hardware, you can learn more about servicing your device at the following link:
Apple - Support - Service Answer Center
http://www.apple.com/support/ipod/service/faq/
If you’d like to attempt some more troubleshooting tips, see this link:
iPod nano - 4th and 5th generation - Apple Support
https://www.apple.com/support/ipodnano/4th_5th_generation/
If you do decide to service your device, you’ll want to make sure all of the music and information is backed up. If you regularly sync your device with a computer, this music should be on the computer. If not, you can learn about what purchases you can transfer from the iPod to a computer:
iTunes Store: Transfer purchases from your iOS device or iPod to a computer
http://support.apple.com/kb/HT1848
iTunes: Transferring media from your iPhone, iPad, iPod touch, or iPod
http://support.apple.com/kb/HT1209
Thanks,
Matt M. -
Hello. I dropped my ipad, first gen, from my chair to the floor. The screen went black and I can't start it again. I have tried to hold both buttons down at the same time, but nothing happens. Any help?
You will probably have to contact Apple for repair but before you do try this:
Turn your iPad upside down on your lap and give it a hard smack on the back. -
My iPhone 4s screen went black. I can hear the phone receiving messages though. I tried to restore through itunes. I failed because "find my iPhone" app is on, I cannot switch it on since the screen is black and I can't see
Instead of trying to restore through iTunes, use the Find My iPhone to your advantage.
Either go to www.icloud.com and perform a remote wipe of the device via FMiP, or download the FMiP app to another iOS device and do it from there.
A remote wipe will also restore the device back to factory settings. -
I just bough after effect cs6 and I have installed it on my laptop but my composition screen is black and I'm not able to see the video. These are the following info about my computer. 1366x 768 resolution, referesh rate 60, graphoc memeory 1792 MB. 1 TB Hard drive, 12 GB RAM
Thank youtony deban wrote:
1366x 768 resolution,
The system requirements for CS6 (which can be found here: System requirements | After Effects) specify a screen resolution of at least 1280 x 900 -
IPhone 4 screen went black and I can't use top shut off button
What can I do to fix my iPhone 4 the screen went white and then Black screen
I can't shut it down because the top metal button doesn't work.tyeshajanay4895 wrote:
What exactly does the out of warranty replacement do?
... They take your old non working phone. They hand you a remanufactured phone of the same model/color/capacity that works...
That's what it 'does'. -
Help My ipad mini's screen turned black afther doing an update from a program can anybody tell me what to do?
Care to share your solution with the rest of the community?
It might help someone else down the road. -
my screen went out last night and i have still been receiving calls and text messages but i can't get the screen back on because i can't turn my phone off, how can i get it working??
tyeshajanay4895 wrote:
What exactly does the out of warranty replacement do?
... They take your old non working phone. They hand you a remanufactured phone of the same model/color/capacity that works...
That's what it 'does'. -
I was meeting around with lock my iPhone and I was prancing my friends when i locked my phone now it's locked and the screen is now pitch black it can receive calls nut I can't see a thing
There is nothing that you can do to get rid of the balance on your own. Contact iTunes Store Support and seek their assistance. I believe that they can reset your balance for you.
https://expresslane.apple.com/Issues.action -
However, I took some screenshots and when I went to upload the pictures to my Mac, the screenshots uploaded. So I believe my phone still is working but the screen is just not turning on. I tried holding down the home and top button for ten seconds, even longer, but nothing occurred. I am hoping to find a possible solution so I do not have to buy a new phone. Thank you!
The backlight burned out from getting it wet. You will have to replace the screen at a 3rd party shop, buy a screen and replace it yourself, or make a Genius Bar appointment at your nearest Apple Store and do an out-of-warranty replacement for $199 USD.
-
I have tried going in my notification and turning my apps on .
Perform a Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons... -
My iphone screen is black and now i can't do anything on it. someone help me!!
I just got my phone fixed like 3 weeks ago and i put my phone against a table in the cafeteria at my school and now the phone screen's black and i can't do anything on it.
See Here for > Frozen or unresponsive iPhone
Try this First... No Data will be Lost..
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons..
Maybe you are looking for
-
Did you have video problems with Flash Player 10.2?
Hello Flash Player community, We're getting ready to release Flash Player 10.3 and we'd like to ask for your help and input. If you encountered video related problems with the current version of Flash Player on sites like YouTube, we're especially i
-
Will apple still replace my iphone 4 if it has been opened?
I got my iphone last august and it worked fine until my lock button broke. My phone was covered under warranty so apple replaced it. Lo and behold, my lock button broke once again this past week. I went to a verizon store to see if they could replace
-
I am unable to convert certain files to pdf with Adobe Acrobat 8 Professional
I am unable to convert Word & PowerPoint files to pdf. (I am able to convert image files & excel) I have enable macros in Word and still cannot convert the file. I am getting the error popup: Unable to open the document Please check to see if you h
-
Why are the PDF files in v27 bigger than in v25?
I have just created a v27 version of my single iOS app, which has been v25 before. Now the app has a size of about 550 MB instead of about 430 MB. I found out that the PDF files of the slideshows are bigger than before. What is the reason for this c
-
Dual Monitors? (Original Mac Mini PPC)
I have a Vga splitter and have plugged two monitors in it has duplicated them is there anyway to extend the screens