ICal issue after completing installation of Lepard?

Hi folks,
I have done a lot searching on this discussion forum, but not a whole a lot about iCal. After successfully installing the leopard, the only issue is that the iCal didn't migrate from Tiger. I used A&I to install the Leopard. Does anyone have the same problem? I tried different ways to import the old date, it just "fails". I even brought it to Genius guy to help me. They spend almost 2 hours on it, but ended up nothing. They couldn't figure out what happened. Any suggestions?
Thanks a lot.

i had the same problem. here's what i did:
sync .mac to a computer running tiger.
did a backup iCal from file menu.
transferred that file to the leopard computer.
did a restore iCal from file menu and selected the new backup file.
it populated my iCal and everything was great.
now i have a new problem. i'll submit that one in minute and see if anyone can help

Similar Messages

Cannot find Runtime Assitant after complete installations

Hi Gurus,
I have tried deploying OWB 10g along with Oracle 10g (10.2) as well as with Oracle 9i (9.2.0). Both the times the installation was successful but I could't find the Runtime Assitant anywher after complete installations.
I found Repository Assistant with the help of which we created the Design repository but was unable to find the Runtime Assistant in the installed components.
Please help..
Regards,
AB

As detlef pointed out, in the OWB 10gR2 version, there is no more notion of separate repositories. Check out this thread:
Design Repository / Runtime Repository OWB 10gR2
But for every database hosting a target schema you need to install and have running the OWB runtime service. This service is then accessed using the Control Center, previously known as the Runtime Repository Assistant.
Cheers,
Borkur

Software Update Issue-After Leopard Installation

I installed Leopard yesterday and ran the first software update; everything worked OK; the first software updated included three updates: Remote Desktop Client update; iDVD update and Garageband update.
Today I tried to run another update and had this issue: while the Software Update is displaying a message saying "New software is available for your computer" there is nothing listed below and the install button is disabled! Then I went to the Software Update Preference and saw a message there saying Last Attempt Failed; error occurred while checking
Does anyone have the same issue while trying a new software update after Leopard installation?
I do understand there is another new update issued yesterday by Apple regarding login key
Grateful for any insight re this problem

Hi. I had the same problem after doing an erase and install of Leopard yesterday. When I go into Terminal (actually iTerm) and type "softwareupdate -l" (to list all updates), I see:
XML parser error:
Encountered unexpected EOF
Old-style plist parser error:
Malformed data byte group at line 1; invalid hex
This appears to be a problem with com.apple.SoftwareUpdate.plist, the property list for Software Update, but I'm not sure. If I type "find ~/Library/ -name '*plist' -exec plutil {} \;" to check all the plists, however, the Software Update plist checks out as OK. Furthermore, deleting that property list and rebooting to force the OS to create a new plist does not fix the problem. Weird. Now, if I type "sudo softwareupdate -i -a" to install all updates (change "-a" to "-r" to only install recommended updates), it works fine. I still get that same error when I try to run Software Update normally afterwards, but if I go to the preferences, all of the updates are listed under Installed Updates. So, I can get the OS to update automatically, but only through the Terminal. This is very weird, and I hope someone can shed more light on this situation.
Message was edited by: timocrates

My Trial Illustrator icon disappears after completing installation download

I am not a tech person, so please bear with me and thanks for any help.
I have a MAC OS X version 10.4.ll Processor is 800 MHz Power PCG4. My Memory is 1GB SDRAM.
When I go online to download Illustrator CS4, this is what happens.
An icon appears on my desktop called ADBEILSTCS4_LS1.dmg. When I click it, the Adobe Illustrator icon appears. Beneath it are three PDF files. When I click onto the Adobe icon, it then hit "Setup". The installer screen checking system profile comes on and is ultimately found to be fine. Then the Loading Set.up screen appears and I check "install" After a few minutes, both bars finish and a message saying "Thanks for installing Adobe Illustrator CS4" appears. When I hit "exit", the AI icon on my desktop disappears.
I have tried reloading this five times and each time the results are the same.
If someone could help me, I would greatly appreciate it.
Many thanks!!!
Daryl

Hello Daryl,
In addition to Ben's suggestion, I will check this link:
http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh145.html
I hope this helps you!

Gnome issues after fresh installation

HI,
I have reinstalled my computer and I installed new Gnome. But I have 2 issues:
1. I can't add online account clicking on Google Account causes segfault:
maj 12 11:33:33 hydroid1 /etc/gdm/Xsession[544]: (gnome-control-center:2277): IBUS-WARNING **: Unable to connect to ibus: Nie można połączyć: Połączenie odrzucone
maj 12 11:33:36 hydroid1 /etc/gdm/Xsession[544]: (gnome-control-center:2277): GLib-GObject-CRITICAL **: g_param_spec_internal: assertion `!(flags & G_PARAM_STATIC_NAME) || is_canonical (name)' fa
maj 12 11:33:36 hydroid1 kernel: gnome-control-c[2277]: segfault at 48 ip 00007fdf2140125f sp 00007fff46567070 error 6 in libgobject-2.0.so.0.3600.1[7fdf213e3000+4d000]
maj 12 11:33:37 hydroid1 systemd-coredump[2286]: Process 2277 (gnome-control-c) dumped core.
2. In empathy I can't configure my google apps account. I have authentication failure all the time. I already set server to talk.google.com, port to 5223 and checked "Use old SSL".
Here is log:
auth_failed: wocky-sasl-auth.c:274: Authentication failed!: Client aborted authentication.
connector_error_disconnect (connection.c:1772): Interactive authentication error, reason 3, dbus error org.freedesktop.Telepathy.Error.AuthenticationFailed
If anyone has some solutions, please help.

Same here ;/ Problem occurs after gnome-shell 3.8.1 update.

DRM issues after new installation on PC

Hi
My question is this: I need to completly reinstall my system (XP, Office, Itunes, etc). I have stores all my music on a seperate drive.
After i have reinstalled the system will my PC be regarded as new system (DRM), so that Itunes will think i have authorized a second computer?
I know this doesn't effect the music i have loaded from CD's, but I have downloaded quite alot via Itunes.
How do I make sure I can maintain playing rights to the music i have bought?
Regards - LIE_722

Glad you found it! Just deauthorize before you re-install XP.
One Computer Using Multiple iTMS Authorizations

ICal issues after iOS 8 upgrade

I just recently upgraded my wife's iPhone 5s with iOS 8. The upgrade went great with the exception of the iCal shows duplicates of all events. I checked to make sure the "calendars" were only showing the calendar on iCloud. I also checked the settings/mail to ensure nothing was duplicated. I backed up and restored the iPhone and it didn't solve the problem. Any ideas?

I was able to recover my voice memos, though the original titles are gone.
I opened my Voice Memos app like everyone else and I saw each memo quickly deleting and acting glitchy. I then connected my iPhone to my macbook so I could attempt to restore the backup I had made before the ios8 update. It said it couldn't be done because there wasn't enough room. However, when I opened my memos app again, the voice recordings were there! I can't verify if it's all of them but I'm grateful I was able to recover some.
I use this app to record lyrics on the go and I'd really like Apple to step up and fix this.

Can we add Java Stack after complete installation

We have already installed SAP ECC 6.0. While installation, we had opted only for ABAP stack. Can we add the Java stack now?
Regards.

Hi,
Yes you can install java server on existing ABAP but
If you have an existing ABAP central instance + ABAP dialog instance and
you want to install Java Add-in to the central instance, you first need
to uninstall the ABAP dialog instance, then Install the Java central
instance add-in and then install an ABAP+Java Dialog insntance.
Please refer ABAP+Java instalation guide.
Best regards,
Vipin

ICal issue after moving Mobile Me to iCloud

I upgraded my iPhone 4 to iOS5 and then moved Mobile Me over to iCloud. Now in iCal it says the following as its not connecting to iCloud:
the calendar https://cal.me.com:8443/principals/users/1.1373190781/ was not found on the server. Make sure the URL is correct.
Anyone know the iCloud server name that needs to be updated?
Currently its cal.me.com

It's a really bad idea to post your email address - it's an invitation to spam - and I've asked the Hosts to remove it.
MobileMe has been closed for over five months now. You needed to migrate your MobileMe account to iCloud - if you did not do this before August 1 then the entire contents of the account have been deleted.
You can reactivate the address (though not its previous contents) by signing in with it in System Preferences>iCloud and enabling Mail in the checklist there.
If you did open an iCloud account but it's not working you can check whether you can receive email at http://icloud.com - if this is the case then you should sign out on your Mac and sign back in again and renable Mail and any other data types.

Resolution Issue after driver installation

After doing an update to the drivers for my GeForce 9600 video card I was attempting to get it to work with my 40" screen TV again (the driver update reset things apparently). After fiddling around I don't know what I changed but now I can't see any screen. My PC is connected DVI at the PC and non DVI (RGB) at the TV. I've attempted booting in safe mode to reset things but can't even get into safe mode. I think what may have happened is I set my settings to detect TV automatically but when i connect the PC to my computer monitor I get the same results. When I boot the system i can see the motherboard logo screen and windows logo load screen fine, from there everything is black after that. when I connect my pc monitor it tells me my resolution is currently 640x800 although i think this is false since the windows load screen appears to be 1024x768. Any ideas/help is greatly appreciated! If I have to does anyone think that inserting my xp disk and doing a repair will work? I hope it doesn't come to that except for last resort.
Thanks,
Nate82
MSI N9600GT 512M OC GeForce 9600 GT 512MB 256-bit GDDR3 PCI Express 2.0 x16 HDCP
ASUS P5N-D LGA 775 NVIDIA nForce 750i SLI ATX Intel Motherboard
Intel Core 2 Quad Q6600 Kentsfield 2.4GHz LGA 775 Quad-Core Processor Model BX80562Q6600

f8 boot in safe mode and see what its set at

Issue after Java Addin Successfull Installation-- com.sap.engine.services.d

com.sap.engine.services.deploy.container.ExceptionInfo: Naming error.
Hi All,
Please help me to fix the following issue:
After Successfull installation of Java Addin to ECC 6.0 (SR3,Oracle 10.2,Solaris 5.10) i am facing the following issue when i try to access http://<hostname>:50000/nwa and http://<hostname>:50000/useradmin
com.sap.engine.services.deploy.container.ExceptionInfo: Naming error.
And if i try to access http://<hostname>:50000 it works fine.
I have restarted Java stack and also ABAP+Java Stack but still no luck.
Thanks,
Siva Kumar

Hai,
Check the below links.....
access SLD failed
com.sap.engine.services.deploy.container.ExceptionInfo: Naming error
Regards,
Yoganand.V

Vip issue on clusterware installation on 10.2.0.4.0 in aix 5.3

Dear all,
we are facing vip issue after clusterware installation on 10.2.0.4.0 version as crs_stat showing all online but when we fire ifconfig all vips come into one node pls find output for your information
NODE 1":--
bash-3.2# ifconfig -a
en1: flags=1e080863,480<UP,BROADCAST,NOTRAILERS,RUNNING,SIMPLEX,MULTICAST,GROUPRT,64BIT,CHECKSUM_OFFLOAD(ACTIVE),CHAIN>
inet 172.xxxxxxxx netmask 0xfffff800 broadcast 172..xxxxxxxx
en2: flags=1e080863,480<UP,BROADCAST,NOTRAILERS,RUNNING,SIMPLEX,MULTICAST,GROUPRT,64BIT,CHECKSUM_OFFLOAD(ACTIVE),CHAIN>
inet 1..xxxxxxxx netmask 0xffffff00 broadcast 1..xxxxxxxx
lo0: flags=e08084b<UP,BROADCAST,LOOPBACK,RUNNING,SIMPLEX,MULTICAST,GROUPRT,64BIT>
inet 127.0.0.1 netmask 0xff000000 broadcast .xxxxxxxx
inet6 ::1/0
bash-3.2#
bash-3.2# ./crs_stat -t
Name Type Target State Host
ora....cl2.gsd application ONLINE ONLINE ibm-...-cl2
ora....cl2.ons application ONLINE ONLINE ibm-...-cl2
ora....cl2.vip application ONLINE ONLINE ibm-...-cl2
ora....cl1.gsd application ONLINE ONLINE ibm-...-cl1
ora....cl1.ons application ONLINE ONLINE ibm-...-cl1
ora....cl1.vip application ONLINE ONLINE ibm-...-cl2 ------ node 1 vip show in node 2
NODE 2 :--
bash-3.2# ifconfig -a
en1: flags=1e080863,480<UP,BROADCAST,NOTRAILERS,RUNNING,SIMPLEX,MULTICAST,GROUPRT,64BIT,CHECKSUM_OFFLOAD(ACTIVE),CHAIN>
inet 172.xxxxxxxx netmask 0xfffff800 broadcast 172.xxxxxxxx
inet 172.xxxxxxxx netmask 0xfffff800 broadcast 172.xxxxxxxx
inet 172.xxxxxxxx netmask 0xfffff800 broadcast 172.xxxxxxxx
en2: flags=1e080863,480<UP,BROADCAST,NOTRAILERS,RUNNING,SIMPLEX,MULTICAST,GROUPRT,64BIT,CHECKSUM_OFFLOAD(ACTIVE),CHAIN>
inet 1.xxxxxxxx netmask 0xffffff00 broadcast 1.xxxxxxxx
lo0: flags=e08084b<UP,BROADCAST,LOOPBACK,RUNNING,SIMPLEX,MULTICAST,GROUPRT,64BIT>
inet 127.xxxxxxxx netmask 0xff000000 broadcast 127.xxxxxxxx
inet6 ::1/0
pls help any one facing same issue

Your Node1 VIP was migrated to Node2 due to a failure of some kind. The VIP does not always come back automatically:
http://blogs.oracle.com/bcndatabase/entry/on_rac_vip_failback
Iordan Iotzov
http://iiotzov.wordpress.com/
Edited by: Iordan Iotzov on Sep 19, 2011 7:55 AM

Server authenticationerror after SR3 installation

Hi,
We have developed a html page ( page1.htm) in that we are setting some xMII session variable and opening a new page (page2.htm) using window.open.
In page2.htm i am getting xMII session variable and calling a transaction as below.
window.location.assign("http://<server>/Lighthammer/Runner?Transaction=<transactionname>&OutputParameter=FILE&DOCNO=123*IsBinary=true"). This transaction actually downloads a file from SAP.
This is working perfectly before implimenting SR3 installation. But now system is showing a login screen. SR3 installation might not be issue it might be with something else. But we are getting this issue after SR3 installation.
It will be great helpful if anyone can help.
Thanks,
Srinivas.

Jeremy,
Just now I tried using reletive path. "/Lighthammer/Runner?Transaction=sdasa&OutputParamter=adsa......". Stil it is showing login page.
But when I cheked logs it is showin this message.
2007-09-21 13:33:04,902 ERROR CMSFilter Authorization error, -101 - ticket 'ST-2-8hackf43vqIgdFufNHwj' not recognized.
If you can help me with this that will be great help.
Thanks,
Srinivas.

After upgrading to Mountain Lion, I repurchased Garageband and I can't get passed the complete installation. I don't seem to have the "com.apple.garageband.plist" file that has been a common solution. Any suggestions?

After upgrading to Mountain Lion, I repurchased Garageband and I can't get passed the complete installation. I've read through several posts that all reference the "com.apple.garageband.plist" solution. I don't seem to have the referenced .plist. Any solutions or suggestions?

Did you upgrade from SnowLeopard?
I can't get passed the complete installation
What exactly is happening? Is GarageBand trying to download over and over again?
all reference the "com.apple.garageband.plist" solution. I don't seem to have the referenced .plist.
The property list stores your preferences, but also the settings from the last run of the application. If that file is corrupted in some way, you might see third behaviour.
You must have this file, for it will be recreated automatically, if it is missing, or you have a permissions problem with your user library.
Perhaps you did look in he wrong place.
in MacOS 10.7. or later the User Library is hidden. To find the Preferences Files use the Finder's "Go" menu:
Quit GarageBand, if it is running.
Click onto you Desktop to bring the Finder forward.
In the Finder Menu press "Go" and hold down the "option/alt" key, until your user library appears in the drop-down menu
Select "Library" and in the Finder window that opens navigate to the "Prederences" folder; move com.apple.garageband.plist to the Desktop.
Log off and on again (don't skip that step!). Retry GarageBand and see if it GarageBand is now downloading the missing content properly.
If that does not fix the problem, post back and explain in more detail what the download problem is.
Why did you "repurchase" GarageBand? If you already owned GarageBand '11, it should be unnecessary.
Regards
Léonie

I have upgrade to Ios5 but after the installation was complete I found that the App Store and Itune are displayed in French version

I have upgrade to Ios5 English version but after the installation was complete I found that the App Store and Itune are displayed in French version.

But the model no. of my iphone i.e A1303 is of 3GS as clearly mentioned here >> http://support.apple.com/kb/HT3939. Then how its become 3G.

ICal issue after completing installation of Lepard?

Similar Messages

Maybe you are looking for